This Government Contract opportunity from California was posted on April 10, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Flashing Beacon Supply and Mounting

Closed

State & Local

Submission Closed04/24/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332323

New

DIBBS

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0350

Solicitation SPE8E8-27-T-0350 is a procurement request by the DLA Distribution San Joaquin for 37 electrical immersion heating elements, identified by NSN 4520-01-530-8693. The contract specifies a delivery timeframe of 167 days after order, with a need ship date of April 26, 2027. Performance is based on FOB Origin terms, while inspection and acceptance will occur at the destination in Tracy, California. The procurement incorporates technical and quality requirements from the DLA Master List, and requires compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS regulations regarding the Berry Amendment, Buy American Act, and cybersecurity reporting under DFARS 252.204-7012. Offerors must submit quotes through the DLA Internet Bid Board System and provide necessary small business representations. The contract is managed by Alexis Selby at DLA Troop Support, Construction and Equipment.

POSTED

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0367

This solicitation, issued by DLA Troop Support Construction and Equipment, is a Request for Quotations for the procurement of 24 electrical immersion-type heating elements, identified by NSN 4520-01-597-3589. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332323. Delivery is required within 167 days after order, with the place of performance and delivery located at DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements under RP001. Technical and quality requirements are governed by the DLA Master List (RA001), and the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

POSTED

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0352

This fixed-price solicitation, issued by DLA Troop Support Construction and Equipment, is for the procurement of three non-immersion electrical heating elements identified by NSN 4520-01-530-8694. The contract is designated as a HUBZone set-aside under NAICS code 332323. Delivery is required within 167 days after receipt of order, with a specified need ship date of April 26, 2027, and a final required delivery date of May 26, 2027. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA packaging requirements RP001 and the DLA Master List of Technical and Quality Requirements taking precedence. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and stringent cybersecurity requirements such as DFARS 252.204-7012 for safeguarding covered defense information. Offerors are encouraged to submit quantity ranges via DIBBS and must provide full data packages if proposing alternate parts.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

GDOT-Certified Guardrail Material Supply

POSTED

DEADLINE

Custom Steel Security Gate Fabrication

Valley Center Pauma USD

POSTED

DEADLINE

Supply of Ameristar Impasse Trident (or Equal) Fencing Components

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Custom Decorative Guardrail SystemsThis subcontract involves the fabrication and installation of custom decorative guardrail systems for prime contractors working on City of Danville Riverfront Park projects. The scope of work includes the production of steel posts and rails, the integration of stainless steel mesh infill panels, and the execution of core drilling into existing walls with a six-inch embedment utilizing non-shrink epoxy grout to ensure a fully installed and aligned system. Compliance requirements are strict, necessitating full adherence to OSHA safety standards and mandatory background certifications for all employees, specifically requiring no felony convictions within the last seven years. Interested parties must respond by November 17, 2026, to provide these specialized fabrication and installation services within the City of Danville.

POSTED

DEADLINE

IFB-26-27-031-Riverfront Park Guardrail and Fence Improvements

Solicitation # IFB-26-27-031

The City of Danville, Virginia, is soliciting bids under IFB-26-27-031 for the construction of decorative guardrail and fence improvements at Riverfront Park, specifically near the Martin Luther King Jr. Memorial Bridge. The scope of work includes the installation of custom fabricated decorative guardrails with steel posts and stainless steel mesh infill panels, as well as a 48-inch-high decorative welded-wire fence system. Key technical requirements include core drilling with a minimum 6-inch embedment using non-shrink epoxy grout, site restoration including grading and mulch replacement, and final alignment of all components. The project must be completed within 60 consecutive calendar days from the Notice to Proceed. The contract will be awarded to the lowest responsible and responsive bidder, with consideration also given to the proposed completion time. Bidders must provide a 5% bid bond, and the successful contractor must provide performance and payment bonds for 100% of the contract amount. A 5% retainage will be withheld from each invoice until final acceptance. Compliance requirements include adherence to OSHA safety standards, non-discrimination policies, and a mandatory employee background certification stating that staff have not been convicted of a felony in the past seven years. Bids must be submitted by November 17, 2026, via the eVA portal or as a sealed paper submission.

POSTED

DEADLINE

Metal Beam Guardrail Material SupplierThis subcontract opportunity is for a Metal Beam Guardrail Material Supplier to provide galvanized steel beam rails, steel posts, and specialized mounting hardware for prime contractors working on Texas Department of Transportation projects within the Paris District. The selected supplier is responsible for the procurement or fabrication of these components and must ensure all materials strictly adhere to TxDOT approved product lists and specifications. The scope of work includes the delivery of all required guardrail materials directly to project sites or designated staging areas located in Lamar County, Texas. Interested parties must submit their responses by November 19, 2026, to support these highway infrastructure projects.

Texas Department of Transportation

POSTED

DEADLINE

Galvanized Fencing and Hardware SupplyThis subcontract for Galvanized Fencing and Hardware Supply supports prime contractors on California Military Department projects located at JFTB Los Alamitos in Orange. The scope of work involves the delivery of permanent fence components, including 9-gauge galvanized chain-link fabric, 12-gauge steel ties, barbed wire, and ASTM #1043 or #1083 round pipe or square tube posts, all of which must adhere to UFC 702 standards. The contractor is responsible for delivering all specified fencing materials and hardware directly to the site. A critical administrative requirement is the submission of material submittals, which must be provided within 10 working days of the project start date. The solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026.

California Military Department

POSTED

DEADLINE

Ornamental Fencing SupplierThis subcontract agreement establishes a partnership for the supply of black powder-coated ornamental welded panels to support prime contractors on projects for the Texas Health and Human Services Commission and the Department of State Health Services. The scope of work requires the manufacture and delivery of 250 units of 8x6 foot welded 2-rail panels, constructed with 5/8 inch 18 gauge pickets and 1x1 inch 16 gauge tubular rails. All materials must strictly adhere to the specifications outlined in Exhibit C. The supplier is responsible for the complete production and transportation of the 250 panels to the designated project site. This procurement is categorized under NAICS code 332323 and is managed through the Texas Health and Human Services Commission.

Health and Human Services Commission

POSTED

DEADLINE

Galvanized Pitch-of-Roof Track SupplyThis subcontract involves the fabrication and supply of specialized galvanized overhead door tracks for prime contractors working on Iowa Department of Transportation facility projects. The scope of work specifically requires the production of pitch-of-roof tracks that are custom-angled to meet precise roof pitch requirements and adhere to all approved design specifications. The selected provider is responsible for the delivery of these fabricated materials F.O.B Destination to the Repair Shop Annex. This procurement is categorized under NAICS code 332323, with a response deadline set for November 10, 2026.

Iowa

POSTED

1 day ago

DEADLINE

in 13 days

AI Contract Overview

This subcontract opportunity with the California Department of Transportation involves the supply and installation of two Rectangular Rapid Flashing Beacons. The scope of work includes providing the beacons along with all necessary pole mounting and breakaway hardware, ensuring all equipment and installation methods comply with NCHRP Report 731 and Caltrans standards. The solicitation was posted on April 10, 2025, with a response deadline of April 24, 2025. Classified under NAICS code 332323, this project requires a contractor capable of meeting specific state transportation safety regulations for the deployment of flashing beacon systems.

General Info

Agency

California Department of Transportation

NAICS

332323 - Ornamental and Architectural Metal Work Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 02A2406.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SB Minor B/ 02A2406,Construct crosswalk, ADA curb ramps

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedApr 10

subcontract

Response DeadlineApr 24

Deadline has passed

Submission Closed

04/24/2025, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and install two flashing beacons (RRFBs), including pole mounting and breakaway hardware, compliant with NCHRP Report 731 and Caltrans standards.