Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Flat Washer Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of flat washers identified by NSN 5310-00-616-1828, ensuring full compliance with applicable military specifications and packaging standards mandated for defense logistics. The item is being procured under a subcontract arrangement managed by the Defense Logistics Agency, a component of the Department of Defense, with the North American Industry Classification System code 332111 indicating manufacturing of primary metal products. The solicitation was posted on July 16, 2026, and performance is expected to meet stringent government requirements for quality, traceability, and delivery. The place of performance and specific delivery location are not detailed, and no set-aside provisions or point of contact information are provided in the contract data. All work must adhere to the established military technical and logistical frameworks to ensure interoperability and readiness across Defense Department operations.

General Info

Supply of NSN 5310-00-616-1828 flat washers per military specs under DLA subcontract.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332111 - Iron and Steel Forging

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-25-R-0210.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SETSCREW

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of flat washers per NSN 5310-00-616-1828 compliant with military specifications and packaging standards.

Similar Contracts

Same NAICS industry code

Aerospace-Grade Raw Material SupplyThis subcontract for Aerospace-Grade Raw Material Supply involves providing raw metal stock, forgings, or castings to prime contractors for the production of Valve Bodies under Department of Defense DLA supply contracts. The performance of this contract takes place in Cherry Point, and all supplied materials must strictly adhere to the Buy American Act and the Berry Amendment. A critical requirement of the agreement is the provision of full traceability for all raw materials. This includes the mandatory submission of Material Test Reports and Certificates of Conformance, particularly for items designated as Critical Safety Items. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

CHERRY POINT PHANTOM RD BLDG

POSTED

about 22 hours ago

DEADLINE

PIN, STRAIGHT, HEADED

Solicitation # SPE4A6-27-T-5009

Solicitation SPE4A6-27-T-5009, issued by the DLA Weapons Support ASC Commodities Division, is a fixed-price request for 178 each of straight headed pins, identified as NSN 5315-01-334-3810. This is designated as a critical application item and must be manufactured in accordance with non-government standards NASM20392 Revision 01 and NASM5673 Revision 1. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Sampling will be conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with acceptance requiring zero non-conformances. Delivery is required within 161 days after order, with FOB, inspection, and acceptance points all set at the origin. Supplies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. The government will not evaluate or award to offers utilizing additive manufacturing. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing, and the prohibition of covered telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0076

Solicitation SPE8E4-27-T-0076 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 48 metal bars, identified by NSN 9510015276320. These components, also described as long retaining rods without retaining rings, are intended for use in a Tactical Water Purification System. The procurement falls under NAICS code 332111 and requires the submission of quotes via the DIBBS system. Delivery is specified as FOB Origin with a required delivery date of March 22, 2027, and a need ship date of October 14, 2026, with a delivery window of 66 days after order. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including Metal Certification Contract Data Requirements Lists and DD Form 1423s. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 standards. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and are prohibited from using additive manufacturing processes unless specifically authorized.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0095

Solicitation SPE8E4-27-T-0095 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of 5 feet of cold drawn, annealed flat steel bars. The material must be 0.250 inches thick, 2.000 inches wide, and supplied in whole foot lengths between 6 and 20 feet. Delivery is required within 20 days after order, with inspection and acceptance occurring at the destination. The procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors, and a Certificate of Quality Compliance must accompany every shipment. The contract mandates strict adherence to technical and quality standards, including ASTM A681, ASTM A700, and MIL-STD-129 for marking. Required markings must be legible, waterproof, and include the contract delivery order number, NSN, and manufacturer details, with failure to comply serving as grounds for rejection. Packaging must follow MIL-STD-2073-1E and RP001 requirements. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and incorporates various DFARS and FAR clauses, including those regarding cybersecurity, the Buy American Act, and a price evaluation preference for certified HUBZone small businesses.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

GUIDE, CAM FOLLOWER, FO

Solicitation # SPE7L1-27-T-1579

This procurement, solicitation number SPE7L1-27-T-1579, is a total small business set-aside issued by the DLA Weapons Support Land Supply Chain for the acquisition of 149 units of Guide, Cam Follower, Folding Floor (NSN 5340-01-540-4920). The requirement is governed by NAICS code 332111 and specifies a need ship date of February 5, 2026, with an original required delivery date of April 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including TDP Rev D Gen 4 and specific Quality Assurance Provisions (QAP 13873 and QAP 16236). Quality compliance requires a Certificate of Quality Compliance and Metal Certification. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs assigned to critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001) and the Berry Amendment. Offerors must be registered in the System for Award Management (SAM) and utilize the Wide Area Workflow (WAWF) for electronic invoicing. All quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. Additionally, the contract incorporates cybersecurity requirements under DFARS 252.204-7012 and prohibits the use of additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0088

Solicitation SPE8E4-27-T-0088 is a Request for Quotations issued by DLA Troop Support for the procurement of 294 feet of round metal bar. The material must be Steel Comp 304, hot finished and annealed, with a diameter of 1.250 inches and supplied in whole feet lengths between 10 and 12 feet. This is designated as a critical application item with a reference weight of 4.270 lb/ft. Delivery is required within 152 days after order, with a need ship date of March 28, 2027, delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract mandates rigorous quality and identification standards, including the submission of a Certificate of Quality Compliance with every shipment. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, must be applied using waterproof, legible methods per MIL-STD-129 and ASTM A700. Packaging must adhere to RP001 and MIL-STD-2073-1E. Inspection and acceptance will occur at the destination, and failure to comply with marking requirements is grounds for product rejection. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE8E9-27-T-0228

Solicitation SPE8E9-27-T-0228 is a request for quotations issued by DLA Troop Support for the procurement of 232 feet of flat chrome-molybdenum (4130) steel bars. The material must be 0.250 inches thick and 2.00 inches wide, supplied in whole foot lengths between 10 and 12 feet. This is designated as a critical application item and must comply with technical standards SAE AMS-S-6758B Revision B and SAE AMS2806 Revision D. Delivery is required by May 23, 2027, with a need ship date of April 12, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict adherence to marking and packaging requirements is required, including compliance with MIL-STD-129 and ASTM A700; failure to provide legible, waterproof continuous identification markings—including the contract delivery order number, NSN, and heat/lot number—will result in the rejection of the product. Inspection and acceptance will occur at the destination, though source inspection is waived for approved QSL suppliers. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Offers must be submitted via the DIBBS system. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. A price evaluation preference is available for HUBZone Small Business Concerns, and the use of additive manufacturing for the produced items is prohibited unless specifically authorized.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-6963

Solicitation SPE4A6-27-T-6963 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of 69 units of spring pins, identified by NSN 5315-00-058-9765 and part number MS171560. The items are classified as critical application items and must be manufactured according to the current revision of part standard NASM171401 through 171900 (Revision 4) and reference drawing 13873 EI-000589765. Delivery is required by November 21, 2027, with a need ship date of May 14, 2027, and is established as FOB Origin. The shipping destination is DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional addition of mercury. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while inspection and acceptance will occur at the point of origin. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. HUBZone small businesses may be eligible for price evaluation preferences.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Nuclear-Grade Material SupplyThis subcontract, managed by Battelle Energy Alliance for the Department of Energy, involves the procurement and delivery of nuclear-grade stainless steel materials for pressure vessel projects at the Idaho National Laboratory. The scope of work includes sourcing and delivering shapes, plates, piping, and piping components to the designated fabricator, ensuring that all raw materials maintain full traceability. A critical requirement of the agreement is the provision of Certified Material Test Reports for every steel component supplied. The contract is categorized under NAICS code 332111 and is focused on supporting prime contractors through the delivery of certified, high-specification materials to the performance site in Idaho.

Battelle Energy Alliance–doe Cntr

POSTED

DEADLINE

Raw Material Supply for Shaft AssemblyThis subcontract involves the supply of high-grade industrial alloys or steel raw material stock for shaft assemblies, specifically supporting prime contractors on DLA supply contracts. The provider is responsible for sourcing and certifying materials according to the technical data for NSN 3040-01-593-7423 and must provide Material Test Reports to verify all necessary chemical and physical properties. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles, the contract falls under NAICS code 332111. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Forged Vehicular Bracket ManufacturingThis subcontract involves the manufacture and supply of 48 vehicular component brackets, identified by NSN 2590013776605, for prime contractors under DLA supply contracts. The project requires the use of custom tooling and reference drawings to execute a specific forging process, utilizing forging presses and materials that strictly adhere to NSN specifications. The scope of work includes the delivery of 48 finished forged brackets and a First Article Test report to verify part compliance. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations, the performance of this contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Valve Component Casting and ForgingThis subcontract for the Department of Defense, managed by the DDSP New Cumberland Facility, involves the casting and forging of raw metal components to support prime contractors fulfilling DLA supply contracts. The scope of work includes the creation of specialized tooling for specific valve geometry, the casting and forging of valve bodies and internal components, and the rough machining of forged parts. All deliverables must consist of cast and forged metal valve components. Strict compliance with the Buy American Act and the Berry Amendment is required, necessitating the use of domestic metal sourcing. The project is categorized under NAICS code 332111 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 22 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Metallic Non-Slip Treads

Defense Logistics Agency

POSTED

DEADLINE

Supply of Binder, Load (NSN 3990-01-477-9611)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

CLOSED

Precision Metal Receptacle Manufacturing

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Wear Plate, Rotary – Precision Manufacturing

MARITIME SUPPLY CHAIN

POSTED

CLOSED

Lock Washer Supply (NSN 5310012450726)

Defense Logistics Agency

POSTED

DEADLINE

Precision Forging/Casting Manufacturing

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Precision Metal Stamping and Fastener Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Casting for Vehicular Control Arms

Defense Logistics Agency

POSTED

DEADLINE

Machine Bolt Supply (NSN 5306013698192)

ASC COMMODITIES DIVISION

POSTED

CLOSED

Precision Metal Casting and Machining of Air Inlet Lever

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Lock Washer Supply (NSN: 5310009370453)

Defense Logistics Agency

POSTED

DEADLINE

Flat Washer Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS