Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Flat Washer Supply (NSN 5310-01-416-0489)

Open

Federal

Response Deadline11/16/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or procurement of 76 flat washers meeting NSN 5310-01-416-0489 specifications for prime contractors supporting the Department of Defense. The project is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with final delivery designated for the DLA Distribution Depot Oklahoma located at Tinker AFB. The contractor must ensure all items adhere to the DLA Master List of Technical and Quality Requirements. Strict compliance is required for packaging and labeling, which must follow ASTM D3951 and MIL-STD-129 standards respectively. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026, under NAICS code 332722.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2866.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, FLAT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 11:00:00 AM CSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies flat washers for prime contractors delivering to the DLA Weapons Support, ASC Supplier Oper OEM Division. Manufactures or sources washers meeting NSN 5310-01-416-0489 specifications. Packages per ASTM D3951 and marks/labels packaging per MIL-STD-129. Adheres to the DLA Master List of Technical and Quality Requirements. Delivers 76 units of flat washers to the DLA Distribution Depot Oklahoma.

Similar Contracts

Same NAICS industry code

Plain Hexagon Nut ManufacturerThis subcontract requires the manufacture and delivery of 465 plain hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All units must be produced according to NSN 5310-01-593-9654 specifications and the DLA Master List of Technical and Quality Requirements. The contract strictly prohibits the use of additive manufacturing and mandates that materials be free of hexavalent chromium. To ensure quality control, the manufacturer must utilize inspection systems certified under ISO 9001 or SAE AS9003. The completed order of 465 nuts is to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Self-Locking Plate Nut SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 267 self-locking plate nuts identified by NSN 5310004550395. The contractor is responsible for manufacturing or sourcing these components while adhering to strict quality control sampling standards per MIL-STD-1916 or ASQ H1331. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates full compliance with MIL-STD-2073-1E, RP001, and MIL-STD-129 for all packaging and marking requirements. Additionally, the provider must ensure that all hazard warning labels meet 29 CFR 1910.1200 standards and provide Material Safety Data Sheets where applicable. This opportunity is designated as a Total Small Business Set-Aside.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Critical Application Flat WashersThis subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, requires the procurement of 59 specialized flat washers. The items must meet specific BAE Systems Land and Armaments L.P. and NSN specifications, with strict adherence to the DLA Master List technical requirements. All deliverables are classified as Critical Application Items and must comply with the Buy American Act, as well as MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in New Cumberland. Interested parties must submit their responses by November 19, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

Shear Bolt SupplyThis subcontract involves the supply of 17 specialized shear bolts for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The provider is responsible for manufacturing or sourcing these components in strict accordance with DLA technical data and the Master List of Technical and Quality Requirements, with a specific prohibition against unauthorized additive manufacturing. The contract mandates full compliance with the Buy American Act and NIST SP 800-171 security standards. Additionally, the provider must ensure supply chain traceability per DLAD #C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E packaging specifications. Performance for this requirement is centered in Tracy, California.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Self-Locking Hexagon NutsThis subcontract involves the manufacture of 921 zinc-coated steel self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to Basic Drawing NR 10001 2533408 Revision B and TDP Rev A Gen 1, utilizing precision machining equipment and maintaining compliance with QAP 13873. Quality assurance is a critical component of the agreement, requiring sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. All delivered units of NSN 5310-00-020-0359 must be accompanied by a Certificate of Quality Compliance. The work is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Self-Locking Plate Nuts (NSN 5310016696897)This subcontract involves the manufacture or procurement of 853 self-locking plate nuts, part number BACN10KE3B2CD, to support prime contractors delivering DLA supply contracts for The Boeing Company. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place at Tinker AFB. All components must adhere to FAA airworthiness standards and require FAA Airworthiness Approval. Quality assurance must be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331, and the provider must ensure full supply chain traceability per RQ018. Final delivery must include the required units along with Certificates of Airworthiness and Conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

Socket Head Cap Screw ManufacturerThis subcontract involves the manufacture of 439 specialized socket head cap screws, part number AES14U164500BB3AB7, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The screws must be produced to specifications of 0.164-32 UNC-3A and 0.500 inches in length. Production must be carried out using precision machining, as additive manufacturing is strictly prohibited. The manufacturer must ensure strict adherence to ASME B18.24-2015 and ASME B18.3-2003 standards, with marking requirements following MIL-STD-130N. Quality assurance requires zero-based sampling per MIL-STD-1916. Final delivery consists of the 439 finished screws accompanied by a Certificate of Conformance. The place of performance is located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Hexagon Head Cap Screw Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supplier of Plain Blind Rivet Nuts (NSN 5310-01-503-3521)This subcontract involves the supply of 364 Plain Blind Rivet Nuts meeting NSN 5310-01-503-3521 specifications for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the hardware, ensuring bare item marking follows MIL-STD-130N and packaging adheres to ASTM D3951 and RP001 standards. Quality assurance is critical, requiring zero-non-conformance verified through MIL-STD-1916 or ASQ H1331 inspections. The agreement mandates strict compliance with DFARS 252.225-7001 and DFARS 252.204-7012 regulations. Delivery of the units is set as FOB Origin to DLA Distribution, with performance based in New Cumberland. The contract falls under NAICS code 332722 and was posted by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Plain Round Nuts (NSN 5310010295797)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Precision Flat Washer FabricationThis subcontract involves the precision fabrication of 82 flat washers, identified by NSN 5310-01-049-9174, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All parts must be manufactured according to drawing 19200 10554820 and adhere to ASME Y14.5M-1994 standards. The project mandates a zero-nonconformance acceptance rate in accordance with MIL-STD-105/ASQ Z1.4, and the use of additive manufacturing is strictly prohibited. The selected provider must hold an ISO 9001:2015 certification to ensure quality management standards are met. Performance will take place in Anniston, Alabama, with the final deliverable consisting of 82 finished and inspected flat washers. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture of Tapping, Thread-Cutting Screws (NSN 5305-00-052-6919)This subcontract involves the manufacture of 20 tapping, thread-cutting steel screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be fabricated according to NASM24629 Revision 3 and Part Number MS24629-52, with a strict prohibition on the use of additive manufacturing. Performance will take place at Hill AFB. The contractor is required to maintain SAE AS9003 or ISO 9001 quality systems and ensure compliance with MIL-STD-1916 or ASQ H1331 sampling standards. Final deliverables must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of NSN 4710-00-0033939 (Bell Textron Component)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Aerospace Component Packaging and ShippingThe Aerospace Component Packaging and Shipping subcontract involves providing specialized packaging and logistics services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the packaging of critical valve disks following ASTM D3951 standards and the palletization of shipments according to RP001. Additionally, the contractor must ensure all marking and labeling comply with MIL-STD-129 for the delivery of 78 units of hardware to DLA Distribution San Joaquin. Performance for this contract will take place in Tracy, California. The opportunity was posted on November 8, 2026, with a response deadline of November 16, 2026. This project falls under NAICS code 488510 and is managed under the Department of Defense.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Manufacture of Valve Disks (P/N 3169241-2)This subcontract involves the manufacture of 78 valve disks for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 4810014875190 and Honeywell Aerospace P/N 3169241-2 specifications. Due to the nature of the parts as Critical Application Items, the project requires precision machining and strict adherence to zero-non-conformance sampling standards per MIL-STD-1916 or ASQ H1331. The contractor is required to maintain DFARS 252.204-7012 compliance and ensure all bare items are marked in accordance with RQ017. Performance of the contract will take place in Tracy, California, under NAICS code 336413. The final deliverable consists of 78 finished valve disks meeting all specified technical and regulatory requirements.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Aircraft Access Cover Manufacturer/SupplierThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, requires the manufacture or procurement of five aircraft access covers under NSN 1560002470215. The supplier must ensure all units meet strict technical specifications and comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract mandates the use of domestic materials and explicitly prohibits the use of additive manufacturing unless prior authorization is granted. Final delivery of the five units is subject to acceptance via origin inspection. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026, falling under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Key Washer Production and SupplyThis subcontract involves the production and supply of 52 key washers, identified by NSN 5310-00-888-3714, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the components to meet strict government specifications and ensuring all items are marked according to MIL-STD-129. Logistics will be managed through First Destination Transportation to ensure proper delivery. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Tinker AFB. Operating under NAICS code 332722, the procurement process includes a response deadline of November 16, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Metal Tube Assemblies (NSN 4710-01-691-2876)This subcontract involves the manufacture and supply of two metal tube assemblies, identified by NSN 4710-01-691-2876, for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for fabricating components according to Bell Textron Inc P/N 901-060-132-101 specifications, with performance taking place in Cherry Point. Strict adherence to quality and regulatory standards is required, including ISO 9001:2015 certification and DFARS 252.225-7001 compliance. The scope of work includes bare item marking per RQ017 and MIL-STD-129, sampling according to MIL-STD-1916 or ASQ H1331, and packaging in accordance with MIL-STD-2073-1E.

POSTED

about 1 hour ago

DEADLINE

Aviation Rod End Clevis SupplyThis subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division, involves the procurement of eight high-precision aviation rod end clevises. The required components must be Lockheed Martin part number 235A931-1, identified by NSN 1640-01-555-4479. Because these are classified as Critical Application Items, they must adhere to strict aviation safety and quality standards. Eligible providers must be authorized manufacturers or authorized distributors for Lockheed Martin Corporation to ensure the authenticity and certification of the aviation-grade hardware. The performance of this contract is centered in Jacksonville, and the response deadline for the solicitation is November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Aerospace Component PackagingThis subcontract involves the provision of specialized packaging materials and professional packing services for precision aerospace components supporting DLA Weapons Support ASC projects. The contractor is responsible for ensuring all components are packed according to MIL-STD-2073-1E and DLA requirements, specifically utilizing preservation material MAT:49 and wrapping material MAT:GB. All shipments must be marked in accordance with MIL-STD-129 for delivery to DLA Distribution Cherry Point, ensuring gears are fully prepared for FOB Origin shipment. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the project falls under NAICS code 488510. The place of performance is located in Cherry Point, North Carolina. Interested parties should note the response deadline of November 16, 2026, for this specialized aerospace logistics requirement.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Precision Spur Gear FabricationThis subcontract involves the fabrication of nine high-precision spur gears, specifically Honeywell Aerospace US LLC part number 3860118-2, for the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of aerospace-grade alloys and precision gear cutting and grinding machinery to meet strict technical specifications. Performance will take place in Cherry Point, North Carolina, under NAICS code 333613. To ensure compliance and quality, the contractor must complete a CMMC Level 2 Self-Assessment and adhere to quality sampling standards per MIL-STD-1916 or ASQ H1331. The final deliverable consists of nine finished and inspected spur gears. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the packaging of 13 units in strict accordance with MIL-STD-2073-1E, specifically utilizing Preservation Method 41, Cleaning/Drying 1, Preservative Material 02, and Wrap Material GH. All items must be marked according to MIL-STD-129 using approved MIL-SPEC wrapping and cushioning materials to ensure compliance with Department of Defense standards. The project is designated under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Once the packaging and marking processes are complete, the units are to be delivered for FOB Origin shipment to DLA Distribution. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Transmission Clutch Plate Retainer ManufacturingThis subcontract involves the manufacture and supply of 13 Transmission Clutch Plate Retainers for prime contractors supporting the DLA Weapons Support ASC. The project requires the production of part number 23091257 per NSN 2520-01-737-7674 specifications, utilizing precision machining to adhere to strict aerospace tolerances. All items must comply with RQ017 Physical Identification and Bare Item Marking standards. The contract mandates strict quality control with a zero-non-conformance requirement under MIL-STD-105/ASQ Z1.4 and full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336412. The response deadline for this Department of Defense requirement is November 16, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Precision Manufacturing of Critical Application Shear Bolts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Plain Stud Fabrication (NSN 5307-01-112-8024)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Critical Application Flat Washers (NSN 5310-01-646-3766)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture and Supply of Blind Rivets (NAS9304/NAS1686)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Boeing Shear Bolts (NSN 5306-01-719-4772)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Flat Washers (NSN 5310-01-155-6115)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture of Self-Locking Hexagon Nuts (NSN 5310-01-166-6395)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Aerospace Hose Clamp Manufacturer (NSN 4730-00-278-0417)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturer of Self-Locking Plate Nuts (NSN 5310-01-122-4730)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Self-Locking Plate Nuts (NSN 5310-01-349-0830)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Manufacture of Self-Locking Plate Nuts (NASM21073)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Hexagon Head Cap Screw Supply (NSN 5305015292294)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS