Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Flotation Platform for ADCP Deployment

Active

Federal

Response Deadline07/30/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a durable and buoyant platform specifically engineered to support an ADCP sensor and GPS antenna for reliable operation in flowing water environments. The platform must ensure stable, accurate data collection by maintaining proper orientation and flotation despite challenging hydraulic conditions, and it must be built to withstand prolonged exposure to water, sediment, and varying flow rates without degradation. This is a small business set-aside subcontract under NAICS code 336612, managed by the Great Plains Regional Office of the Department of the Interior, with a response deadline of July 30, 2026. The requirement is targeted exclusively toward small business contractors, emphasizing federal procurement priorities for small business participation. The platform must be fully self-contained, transportable, and suitable for field deployment without requiring extensive setup or external support infrastructure.

General Info

Small business subcontract for durable floating platform to support ADCP and GPS in flowing water by July 30, 2026.

Agency

Department Of The Interior → Great Plains Regional OfficeView Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

MT

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 04:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Great Plains Regional Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Great Plains Regional Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide a durable, buoyant platform designed to support the ADCP sensor and GPS antenna for deployment in flowing water environments.

Similar Contracts

Same NAICS industry code

WINDOW, MARINEThe contract is for the procurement of seven marine windows identified by the NSN 2040-01-312-8602 under solicitation number SPE7L2-26-T-0579, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and is classified as a federal procurement with no set-aside designations specified. The windows are intended for marine applications, likely for naval vessels or maritime infrastructure, and the contract does not indicate a specific place of performance or point of contact details. Proposals must be submitted through the DIBBS system via the provided link, and the procurement is open to eligible contractors without geographic or organizational restrictions beyond federal compliance standards.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Supply of Locomotive Windshields (F40PH-3 & MP36PH-3 Models)Metra is seeking suppliers to manufacture and deliver OEM-compliant or approved equal windshields for its F40PH-3 and MP36PH-3 locomotive models, with all products required to meet specified technical and quality standards. The contract is structured as a subcontract and is open for bid through BonfireHub, with responses due by July 29, 2026. The work falls under NAICS code 336612, which classifies it within the railroad rolling stock manufacturing sector. Performance of the contract is expected to support Metra’s operations in Illinois, though the specific location of delivery or installation is not detailed. The solicitation was posted on July 24, 2026, and no set-aside preferences or organizational restrictions are indicated, meaning any qualified vendor may submit a proposal without limitation based on business size, ownership, or certification.

POSTED

DEADLINE

18' Aluminum Flat-Bottom Center Console Mud Boat ManufacturingA custom 18-foot aluminum flat-bottom center console mud boat is to be fabricated using .125-gauge 5086 marine-grade aluminum, designed for operation in shallow, muddy environments. The vessel must include USCG-compliant flotation systems, proper lighting, and electrical systems built to ABYC standards, ensuring safety and reliability in demanding conditions. The boat must be fully integrated with a 40HP surface drive outboard motor and come equipped with a matching trailer for transport and deployment. All components must be seamlessly engineered for performance, durability, and regulatory compliance, with no partial or incomplete deliverables accepted. The contract is issued under the NAICS code 336612 for boat building and is categorized as a subcontract under the Texas Parks and Wildlife Department. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 7, 2026, at 8:00 PM. Interested parties must submit complete proposals addressing all technical, safety, and integration requirements by the stated deadline, ensuring full compliance with specifications and delivery readiness. The project is to be performed without specified geographic limitations, but all materials and systems must meet the operational and regulatory demands of Texas wildlife and waterway environments.

Parks and Wildlife Department

POSTED

DEADLINE

18ft Center Console Mud Boat PackageTexas Parks and Wildlife Department is soliciting bids for a complete mud boat package consisting of an eighteen-foot aluminum flat bottom center console boat, a forty-horsepower surface drive outboard motor, and a matching aluminum boat trailer, all specifically engineered for shallow water operations amid light vegetation. The equipment must meet or exceed technical specifications outlined in the solicitation dated July 2026 to ensure durability, performance, and safety in demanding aquatic environments across Texas. The solicitation, identified as 802-27-75102-CR, was posted on July 24, 2026, with responses due by August 7, 2026, and is open to eligible vendors under a state and local government procurement program. Point of contact for inquiries is Synthia De Hoyos, reachable via phone or email, and all performance of the contract will occur within the state of Texas.

Parks and Wildlife Department

POSTED

DEADLINE

17' Aluminum Flat Bottom Center Console Mud Boat SupplyThe contract calls for the supply of three new 17-foot aluminum flat bottom center console mud boats built with .125-gauge 5086 marine-grade aluminum, ensuring durability and corrosion resistance in demanding aquatic environments. Each vessel features a self-bailing hull to enhance safety and operational efficiency in shallow, muddy waters, and is equipped with T-rail compatible cleats for secure vessel attachments and TPWD-approved tie-downs and lighting systems to meet state regulatory standards. These boats are intended for use in state-managed waterways and will support enforcement, conservation, and wildlife management missions. The solicitation is open as a subcontract under NAICS code 336612, with a response deadline of August 7, 2026, and is issued by the Texas Parks and Wildlife Department. Interested parties must submit proposals through the Texas SmartBuy portal by the specified deadline to be considered for award.

Parks and Wildlife Department

POSTED

DEADLINE

17ft Center Console Mud Boat PackagesTexas Parks and Wildlife Department is soliciting bids for three 17-foot aluminum flat bottom center console mud boat packages specifically engineered for operation in shallow waters with light vegetation. The boats and accompanying motors must meet or exceed detailed specifications outlined in the solicitation dated July 2026, ensuring durability and performance in demanding environmental conditions. The procurement is open to qualified vendors responding to solicitation number 802-27-75102-BR, with proposals due by August 7, 2026, at 8:00 PM CT. The department, operating under the SLED classification, is procuring these vessels for use throughout Texas, with performance expected to occur within the state. All inquiries and submissions should be directed to Synthia De Hoyos, the primary point of contact, via email at Synthia.DeHoyos@tpwd.texas.gov or phone at 512-389-4510. The solicitation is published on the Texas SmartBuy portal for reference and submission.

Parks and Wildlife Department

POSTED

DEADLINE

Supply of 17ft Aluminum Flat-Bottom Tiller Mud BoatsThe contract entails the manufacture or supply of four 17-foot aluminum flat-bottom tiller-operated mud boats designed for operation in shallow-water wetland and coastal environments, with strict adherence to Texas Parks and Wildlife Department specifications ensuring durability, performance, and environmental suitability. These vessels are purpose-built for accessing fragile ecosystems with minimal impact, featuring robust aluminum construction, flat bottoms for navigating mud and shallow waters, and tiller steering for precise maneuverability in tight or obstacle-heavy conditions. The solicitation is classified as a subcontract under NAICS code 336612, with a response deadline of August 7, 2026, and was posted on July 24, 2026. Performance will be conducted under the oversight of the Texas Parks and Wildlife Department, though specific delivery or installation locations are not detailed. The contract is accessible via the Texas SmartBuy portal, indicating it is part of a state procurement process intended to equip agency operations with specialized vessels for resource management, wildlife monitoring, and conservation activities in ecologically sensitive areas.

Parks and Wildlife Department

POSTED

DEADLINE

17ft Tiller Mud Boat PackagesThe Texas Parks and Wildlife Department is soliciting bids for four 17-foot aluminum flat bottom tiller mud boat packages designed for shallow water operations with light vegetation, with all specifications requiring compliance as of July 2026. Each package must include the boat and motor, engineered to perform reliably in demanding, low-depth aquatic environments typical of Texas wildlife management areas. The solicitation, identified as 802-27-75102-AR, was posted on July 24, 2026, and responses are due by August 7, 2026, at 8:00 PM Central Time. The contract falls under state-level procurement with no specific set-aside classification and is intended for performance within Texas. Synthia De Hoyos of the department serves as the primary point of contact, reachable via email at Synthia.DeHoyos@tpwd.texas.gov or by phone at 512-389-4510, and all submissions must be made through the Texas SmartBuy portal linked in the posting.

Parks and Wildlife Department

POSTED

DEADLINE

CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

UNION ASSEMBLYThis contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pedal Boat Manufacturing – Animal-Themed Recreational WatercraftThe contract involves the manufacture of five-person animal-themed pedal boats designed for recreational use on water, with specifications requiring marine-grade fiberglass construction, UV-resistant gel coat finishes, non-skid surfaces for safety, and self-draining hulls to ensure durability and ease of maintenance. Each vessel must be equipped with either a foot-pedal or hand-crank propulsion system to accommodate varying user preferences and accessibility needs, blending functionality with playful, thematic designs. The work falls under NAICS code 336612, indicating classification within the manufacturing of other recreational vehicles, and is structured as a subcontract opportunity issued by the City of Raleigh under the North Carolina state framework. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 20, 2026, at 7:00 PM Eastern Time. While no set-aside provisions or specific agency contact details are provided, the project underscores a municipal initiative to enhance public recreational offerings with innovative, durable, and user-friendly watercraft. The absence of a defined place of performance suggests flexibility in manufacturing location, though adherence to the technical specifications and delivery standards will be critical for compliance. Interested parties must ensure their proposals meet all engineering, safety, and aesthetic requirements outlined in the solicitation to be considered for award.

City of Raleigh

POSTED

DEADLINE

Supply of Boat Covers (NSN: 2040016513137)The contract requires the supply and delivery of six units of a specified boat cover identified by NSN 2040016513137, with all items must comply with military packaging and marking standards outlined in MIL-STD-129. The delivery deadline is January 19, 2027, and the place of performance is DDSP New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. This is classified as a subcontract under the NAICS code 336612, which pertains to boat building. The contracting agency is the Fluid Handling Division within the Department of Defense, and the procurement is managed through the DLA Dibbs system with the reference number SPE7M426T281A.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of The Interior → Great Plains Regional Office

Same awarding agency

USB and Ethernet Adapter SupplyThe contract seeks the supply of industrial-grade USB and Ethernet adapters specifically designed to establish reliable connectivity between an ADCP system and associated control or data logging devices. The adapters must meet rigorous durability and performance standards suitable for demanding field environments, ensuring stable data transmission and system integration. This is a subcontract opportunity issued under a Total Small Business Set-Aside classification, exclusively open to small businesses as defined by the SBA, with the NAICS code 334418 indicating the focus on communications equipment manufacturing. The solicitation was posted on July 23, 2026, with responses due by July 30, 2026, and is managed by the Great Plains Regional Office of the Department of the Interior. While the precise delivery location and point of contact are not specified, performance is expected to support operational needs tied to the ADCP system deployment within the agency’s regional programs.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Rugged Carrying and Transport CasesThe contract requires the supply of custom rugged carrying and transport cases designed specifically to safely transport ADCP sensors, GPS antennas, and associated electronics under demanding field conditions. Each case must include precision-cut foam inserts to securely hold and protect the sensitive equipment during transit, ensuring no damage occurs from shock, vibration, or environmental exposure. The cases must be durable, weather-resistant, and engineered to withstand harsh outdoor environments typical of geological, hydrological, or environmental monitoring operations. This is a total small business set-aside under the SBA program, meaning only qualified small businesses are eligible to respond. The NAICS code 326199 classifies it under other plastics product manufacturing, indicating the primary manufacturing focus is on custom molded plastic components. The solicitation was posted on July 23, 2026, with a response deadline of July 30, 2026, at 4:00 PM. The contracting office is the Great Plains Regional Office under the Department of the Interior, and the place of performance and point of contact details are unspecified in the provided data. All proposals must meet the technical specifications for protective housing and be submitted prior to the deadline to be considered.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

RTK GPS Antenna SupplyThe contract seeks the supply of a high-precision RTK GPS antenna integrated with an ADCP system to deliver centimeter-level positioning accuracy for hydrological surveying applications. The requirement is part of a subcontract under a Total Small Business Set-aside, specifically designated for small businesses as defined by the SBA, with the NAICS code 334511 aligning the effort to the manufacturing of navigational, measuring, electromedical, and control instruments. The solicitation was posted on July 23, 2026, with responses due by July 30, 2026, and the performance will be managed under the Great Plains Regional Office of the Department of the Interior. The integration of the RTK GPS antenna with the ADCP system is critical to ensuring reliable and precise data collection during field surveys, supporting advanced hydrological analysis and environmental monitoring efforts.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Supply of Acoustic Doppler Current Profiler (ADCP) SensorThe contract seeks the supply of an Acoustic Doppler Current Profiler (ADCP) sensor designed for high-precision water velocity and depth measurements in riverine environments, with integrated Real-Time Kinematic (RTK) GPS technology to ensure centimeter-level positioning accuracy. The system must be robust enough for deployment in challenging field conditions, capable of delivering reliable hydrological data for environmental monitoring, hydrographic surveys, and scientific research applications. The sensor must comply with technical specifications for performance, durability, and data output formats to support integration with existing field instrumentation and data collection platforms. This is a total small business set-aside subcontract under the SBA program, classified under NAICS code 334513, indicating it is exclusively available to small businesses as defined by federal regulations. The opportunity was posted on July 23, 2026, with responses due by July 30, 2026, and is managed by the Great Plains Regional Office of the Department of the Interior. No specific place of performance or point of contact is provided, suggesting the deliverable is a product supply rather than a service-based contract requiring on-site installation or support. The procurement is intended to enhance the agency's capacity for accurate, real-time hydrodynamic data collection in river systems across its operational areas.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Supply of Top-Setting Wading RodsThe contract is for the supply of two 4-foot top-setting wading rods, each graduated in tenths of a foot, complete with mounting hardware and a carrying case, intended for precise hydrologic field measurements. These instruments are critical for accurate water depth recording in stream and river monitoring applications, ensuring reliable data collection for environmental and hydrological studies. The equipment must meet specific technical standards to support consistent and repeatable field operations under varied environmental conditions. This is a small business set-aside solicitation under the SBA program, classified under NAICS code 332510 for metal fabrication, and is issued by the Great Plains Regional Office of the Department of the Interior. The opportunity is open to small business concerns, with responses due by July 30, 2026, at 4:00 PM. The contract is structured as a subcontract, indicating it may be part of a larger project involving federal water resource management, and the place of performance details are not specified, suggesting work may be delivered to a central location or multiple field sites as required.

Hardware Manufacturing

POSTED

DEADLINE

Supply of Handheld Acoustic Doppler Velocimeters (ADVs)The contract solicits the supply of two handheld Acoustic Doppler Velocimeters, specifically the SonTek Flow Tracker 2 or an equivalent model, designed for accurate water velocity measurements in field applications. Each device must meet stringent technical requirements including a minimum depth rating of 30 feet, a velocity resolution no coarser than 0.003 feet per second, Bluetooth and USB connectivity for data transfer, and an IP-67 rating for dust and water resistance. The equipment must be delivered with all necessary配套 accessories to ensure full operational capability in diverse field conditions. This subcontract is a Total Small Business Set-Aside under the SBA program, restricted to qualified small businesses, and is classified under NAICS code 334513 for navigational, measuring, electromedical, and control instruments manufacturing. The solicitation was posted on July 23, 2026, with responses due by July 30, 2026, and the contracting agency is the Great Plains Regional Office of the Department of the Interior, though specific performance location and point of contact details are not provided.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

66--WY Sontek Flow Trackers x2The U.S. Department of the Interior, through its Great Plains Regional Office in Billings, Montana, has issued a sources sought notice for the acquisition of two Sontek Flow Trackers under solicitation number 140R6026Q0111. This action is designated as a Total Small Business Set-Aside, meaning only small businesses certified under the SBA guidelines are eligible to respond, as outlined in FAR 19.5. The NAICS code 334513 applies, which categorizes the requirement under Manufacturing Instrument and Meter Equipment. The notice was posted on July 23, 2026, and responses must be submitted by July 30, 2026, at 4:00 p.m. Eastern Time. The equipment is intended for flow tracking applications, though the specific location of performance has not been designated. Primary point of contact for inquiries is Chris Zook, reachable via email at czook@usbr.gov, and additional information may be accessed through the SAM.gov portal linked in the notice.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

66--WY Torrington SONTEK ADCPThe solicitation titled 66--WY Torrington SONTEK ADCP, under solicitation number 140R6026Q0110, is a sources sought notice issued by the Great Plains Regional Office of the Department of the Interior, located in Billings, Montana. It is specifically designated as a Total Small Business Set-Aside in accordance with FAR 19.5, meaning only small businesses are eligible to respond, and it falls under NAICS code 334513, which pertains to instruments and related products for measuring and testing. The notice was posted on July 23, 2026, with a strict response deadline of July 30, 2026, at 4:00 p.m. Eastern Time. The contract requires the procurement of SONTEK ADCP equipment, likely for hydrological or water flow monitoring applications, with the intended place of performance tied to the Torrington area in Wyoming, though specific location details are not provided. Points of contact for inquiries are managed by Natalie Oslund, reachable via email at natalie_oslund@ios.doi.gov, with a phone number listed but not valid. All responses must be submitted through the SAM.gov workspace link provided, and the government is seeking market research to evaluate industry interest and capability rather than issuing a formal procurement at this stage.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Mobilization, Demobilization, and Project Closeout

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Electrical and Controls Work

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

New Hoist Supply and Installation

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

Wire Rope and Socket Replacement

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month