Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Flow Meter Calibrations - Sewerage

Open
377State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Jefferson Parish Government is soliciting proposals for solicitation number 377 to provide the labor, materials, and equipment necessary to calibrate ultrasonic flow meters for the Jefferson Parish Sewerage Department. The scope of work involves the calibration of specific equipment, including one Pulsar Ultra 3 with ABB C1300 Recorder, one GE Panametrics Model AT868 Ultrasonic Flow Meter with ABB C1300 Recorder, two Pulsar Ultra 5 and Ultra 4 units with ABB C1300 Dual Pen Recorders, and three ABB Magnetic Flowmeters. All work must be performed at four west bank treatment plants: Bridge City, Harvey, Marrero, and Rosethorne. A critical requirement of this contract is that the vendor must provide calibration documentation that complies with LDEQ discharge permits. The solicitation was posted on November 5, 2026, with a response deadline of November 20, 2026. For site visits or further inquiries, the designated point of contact is Ryan Boudreaux.

General Info

Jefferson Parish seeks proposals to calibrate ultrasonic flow meters at four treatment plants.

Documents

1
PDF, High priority: read this firstspecifications
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyLouisiana → Jefferson Parish Government
Contacts1 person available
OfficeN/A
Office AddressN/A
Contacts

Full Description

Show more
Provide Labor, Materials, and Equipment Necessary to Calibrate Flow Meters for the Jefferson Parish Sewerage Department

Similar Contracts

Same NAICS industry code

NAICS: 811210
New
SLED
950-791313 / Tops & PLC Maintenance
Solicitation # SRC0000037566
The State of Alabama, through the Sw Reg Gcw Tunnel Dist 95, is soliciting control systems support services for the period of October 1, 2026, through September 30, 2027. The scope of work involves monthly preventive and routine maintenance of Programmable Logic Controllers (PLC), Human Machine Interface (HMI), and Historian components at the Traffic Management Center complex. Key deliverables include monthly data backups for the Transportation Operation Performance System (TOPS) software, Factory Talk systems, and Historian databases, with all backups stored on redundant external hard drives. Additionally, the contractor must perform biannual hardware inspections for the Bankhead Tunnel, Wallace Tunnel, I-10 Bayway, Cochrane Bridge, and Bayou La Batre Bridge, while providing ongoing application development and updates for TOPS and PLC systems. Financial terms are structured as hourly billing for software maintenance and support across six specific line items for the tunnels and bridges, while hardware is billed as cost plus a percentage markup. The total contract cost is capped at 25,000 dollars, with the possibility of annual renewals for up to five years. All monthly maintenance must be completed within the first week of the month and accompanied by a maintenance report. The contract is governed by the Code of Alabama, including specific provisions for proration and non-appropriation of funds, and requires the supplier to certify tax compliance and the absence of collusion or debarment.
Sw Reg Gcw Tunnel Dist 95

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811210
New
SLED
RF Amplifier Module Repairs
Solicitation # 2101369
Dallas Area Rapid Transit is soliciting bids for a Blanket Purchase Order under solicitation number 2101369 to provide repair services for CommScope Node A RF Amplifier Modules used in its Tunnel Radio System. The scope specifically covers the repair of 700 MHz (DCM AF 7037, ID No. 7577534-00) and 800 MHz (DCM AF 8037, ID No. 7577538-00) amplifier modules. Qualified firms must possess demonstrated experience in repairing RF amplifier modules, bi-directional amplifiers, or distributed antenna system equipment. A critical requirement is that the vendor's facility must have the equipment necessary to test repaired modules in their normal working configuration using a CommScope Node A Chassis, ensuring all units are calibrated to original manufacturer specifications. Repaired modules must be returned to the specified Dallas delivery address within 120 days of receipt, accompanied by detailed repair reports documenting findings, performed repairs, and test results. Units deemed Beyond Economical Repair must be returned with supporting documentation. All repairs include a minimum six-month warranty covering workmanship and replacement parts at no additional cost to the Authority. Invoices are paid 30 days from the receipt of the invoice or order, whichever is later, and the Authority is exempt from Texas state and local sales and use taxes. To be considered responsive, bidders must submit all required documentation and signatures via the Bonfire portal.
Dallas Area Rapid Transit

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Louisiana → Jefferson Parish Government

Same awarding agency

NAICS: 811310
New
SLED
Repair Kitchen Equipment
Solicitation # 336
The Jefferson Parish Government is soliciting bids for the repair of kitchen equipment at the Jefferson Parish Correctional Center located in Gretna, Louisiana. The scope of work includes providing all labor, materials, tools, and testing necessary to repair two Southbend Tilt Skillets, one Vulcan Hart Steamer, one Vulcan Kettle, and one Univex Chopper. All repairs must utilize genuine OEM replacement parts and be performed in accordance with manufacturer specifications. The contractor is responsible for obtaining all necessary permits from the City of Gretna and the Jefferson Parish Department of Inspection and Code Enforcement, and must test each unit to ensure proper operation upon completion. The contract will be awarded to the lowest responsive and responsible bidder. Mandatory requirements for eligibility include possessing a Louisiana State Contractors License with a class in Electrical and Mechanical. The successful bidder must provide final insurance certificates complying with Jefferson Parish resolutions within ten calendar days of the bid opening or risk rejection. Work must be performed during normal business hours, from 7:00 a.m. to 5:00 p.m., Monday through Friday, although contractors may work off-hours at no additional cost to the Parish to ensure safety. Bidders are required to inspect the site and equipment prior to submission to determine the necessary labor and materials.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS