Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Fluid Film Bearing Supplier (Honeywell P/N 2207122-1)

Active

Federal

Response Deadline09/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or procurement of 81 high-precision fluid film bearings for prime contractors supporting DLA supply contracts. The bearings must strictly adhere to Honeywell P/N 2207122-1 specifications, following TDP Rev B Gen 2 and QAP 13873 QAP-B02 Rev B. Compliance with marking and packaging standards is mandatory, specifically RQ017, MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M. The contract is issued by the Department of Defense under the ASC Commodities Division, with performance taking place in Cherry Point. A critical requirement for the supplier is the completion of a CMMC Level 2 self-assessment. Interested parties must respond by September 11, 2026, for this project categorized under NAICS code 333241.

General Info

Procure 81 high-precision fluid film bearings for DoD by September 11, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333241 - Food Product Machinery ManufacturingView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-26HZ.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, FLUID FILM

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 11

Submission deadline

Response Deadline

09/11/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-precision fluid film bearings for prime contractors on DLA supply contracts. Manufactures or procures bearings matching Honeywell P/N 2207122-1 per TDP Rev B Gen 2 and QAP 13873 QAP-B02 Rev B. Performs marking per RQ017 and packaging per MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M. Requires CMMC Level 2 self-assessment. Delivers 81 completed, packaged bearings.

Similar Contracts

Same NAICS industry code

FCI Miami - Mobile Kitchen Requirement - FY 26 - Culinary Arts

Solicitation # 15B30926Q00000006

Solicitation 15B30926Q00000006 is a request for quotation issued by the Department of Justice for FCI Miami to acquire one mobile kitchen for their Culinary Arts program. This combined synopsis and solicitation is prepared under FAR Part 12 for commercial products or services, with the procurement falling under NAICS code 333241. Vendors are invited to submit quotes for two different provided configurations, although only one unit will be purchased. The response deadline is September 11, 2026, at 4:30 PM. The place of performance is located in Miami, Florida, and the primary point of contact for this requirement is Jason O'Neal.

POSTED

DEADLINE

Supply of Precision Sleeve Bearings (Boeing/Kamatics Specs)This subcontract with the Department of Defense ASC Commodities Division involves the supply of two precision-manufactured sleeve bearings for prime contractors on DLA supply contracts. The bearings must conform to Boeing part number 4D0054-16N010 and Kamatics part number KPD677-16-010, with all quality assurance and inspection processes adhering to MIL-STD-1916 and the DLA Master List of Technical and Quality Requirements. The contract falls under NAICS code 333241 and requires strict adherence to DFARS 252.204-7012 cybersecurity compliance. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Outer Bearing Rings (NSN 3110017340694)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Cylindrical Roller Bearings (NSN 3110001208755)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

REFRIGERATOR-FREEZER, M

Solicitation # SPE3SE-26-T-1224

This contract, identified as SPE3SE-26-T-1224, is for the procurement of one mechanical food refrigerator-freezer, part number R10F10-2M-SN-MLR from Cospolich Inc. The equipment must utilize shipboard approved refrigerants R134A or R404A, as R290A is explicitly prohibited for use on naval vessels. Additionally, the contract mandates strict adherence to mercury-free requirements, prohibiting the intentional addition of mercury except in specific functional components like batteries or sensors as specified by NAVSEA. The item is to be delivered FOB destination to COMNAVAIRLANT in Norfolk, Virginia, with a required delivery date of September 8, 2026, and a delivery window of five days after the order. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001. The procurement is managed by the Department of Defense Subsistence FSE Supply Chain, with inspection and acceptance occurring at the destination.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

COVER, STEAM TABLE PAN

Solicitation # SPE3SE-26-T-1225

This contract is for the procurement of three full-sized steam table pan covers under solicitation number SPE3SE-26-T-1225. The items must adhere to technical specifications defined by basic CID A-A-50179C Revision C and comply with DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components like batteries or sensors. Delivery is required within 20 days, with the final destination being the USS OHIO SSGN 726. The contract specifies a zero percent quantity variance and designates the inspection and acceptance points at the destination. All technical and quality requirements are governed by the DLA Master List, and the shipment must be handled as a vessel shipment in accordance with specified DLAD procurement notes.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

REFRIGERATOR, MECHANICA

Solicitation # SPE3SE-26-T-1223

This contract is for the procurement of one mechanical food refrigerator, specifically part number R17F13-2M-SN-MLR from Cospolich Inc. The equipment must utilize shipboard approved refrigerants R134A or R404A, as R290A is strictly prohibited for use on naval vessels. Additionally, the hardware must not contain intentionally added mercury, except where functionally required for specific components like batteries or sensors, in which case they must be shock proof and double contained. The order is a total small business set-aside under the Department of Defense, with delivery required within five days of order. Shipping is FOB destination to COMNAVAIRLANT in Norfolk, Virginia. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The required delivery date is September 8, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Two-Section Reach-In Freezer Supply

W7MW Uspfo Activity Ar Arng

POSTED

DEADLINE

Two-Section Reach-In Refrigerator Supply

W7MW Uspfo Activity Ar Arng

POSTED

DEADLINE

Commercial Ice Machine Heated Cabinet Supply

W7MW Uspfo Activity Ar Arng

POSTED

DEADLINE

Commercial Ice Machine and Bin Supply

W7MW Uspfo Activity Ar Arng

POSTED

DEADLINE

Roll Grooving Tool Supplier

W6QM Micc-Ft Drum

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Supplier for NSN 6150-01-475-7629

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Backup Lights (NSN 6220-01-375-3530)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Manufacturer of Cable Assembly (NSN: 6150-01-555-8904)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Supply of Pneumatic Sensor Manifolds (NSN 6610-01-149-1465)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 79 pneumatic sensor manifolds identified by NSN 6610-01-149-1465. The provider is responsible for delivering these units to prime contractors fulfilling DLA supply contracts, ensuring all items undergo First Article Testing per Section E08 and maintain full supply chain traceability documentation. All deliverables must adhere to MIL-STD-2073-1E standards for military packaging and marking. The contract falls under NAICS code 333911, with a response deadline of October 7, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE4A6-26-R-XD60

This solicitation, identified as SPE4A6-26-R-XD60 and issued by the Department of Defense ASC Commodities Division, seeks quotations for ten units of a wiring harness, NSN 5995-01-680-2478, part number 070647-0001 from Leonardo US Cyber and Security. The requirement is for a critical application item identified as a commercial product with no shelf life requirement. The contract will be awarded as a firm fixed price bilateral indefinite delivery purchase order with a total ceiling of 350,000 dollars over a five-year base period. Delivery is required within 118 days after order, with FOB origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Specific technical and quality requirements include the removal of government identification from non-accepted supplies per RQ011 and physical identification per RQ017. Surplus materials are explicitly deemed unacceptable for this national stock number. All submissions must be uploaded via DIBBS by the deadline of September 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

INSULATION SLEEVING

Solicitation # SPE4A6-26-R-XD59

This solicitation, identified as SPE4A6-26-R-XD59 and issued by the Department of Defense ASC Commodities Division, is for the procurement of electrical insulation sleeving under NSN 5970-01-508-5746. The requirement is for 17 rolls, with each roll consisting of 50 feet, specifically referencing Whitmor Plastic Wire and Cable Corp part number WZ102. This is a critical application item provided under a firm fixed price agreement with a delivery schedule of 150 days after receipt of order. The contract allows for no quantity variance and specifies that both the inspection and acceptance points are at the destination, with shipping terms set as FOB Origin. The procurement adheres to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for DLA packaging requirements. Sampling and quality assurance must comply with MIL-STD-1916 or ASQ H1331, utilizing specific verification levels for critical, major, and minor attributes. The solicitation was posted on September 4, 2026, with a response deadline of September 22, 2026. It is structured as an unrestricted solicitation for a bilateral award that may include a five-year base period with a total value cap of 350,000 dollars.

POSTED

DEADLINE

Solicitation # SPE4A6-26-R-XD62

This solicitation, identified as SPE4A6-26-R-XD62, is issued by the Department of Defense ASC Commodities Division for the procurement of 300 units of backup lights under NSN 6220-01-375-3530. The contract is a total small business set-aside and is intended to result in a bilateral indefinite delivery purchase order with a five-year base period and an aggregate value up to 350,000 dollars. The pricing is based on a firm fixed price with a delivery requirement of 190 days after order. The contract mandates strict adherence to various DLA technical and quality requirements, including ISO 9001:2015 standards, specific packaging and marking protocols per MIL-STD-129 and MIL-STD-2073-1E, and the use of qualified products lists. It specifies a prohibition on the intentional addition of mercury, except where functionally required and contained. Quality assurance is governed by sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. The technical data package is based on Revision B Generation 2, referencing multiple specific drawings and revisions.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, POWER, ELECTRICAL

Solicitation # SPE4A6-26-R-XD48

Solicitation SPE4A6-26-R-XD48, issued by the Department of Defense ASC Commodities Division on September 4, 2026, seeks quotes for 143 electrical power cable assemblies under NSN 6150-01-390-7058. This is a total small business set-aside under NAICS code 335931, structured as a bilateral award with an indefinite delivery purchase order for stock buys over a five year base period. The required delivery timeframe is 345 days after the order is placed. The contract contains strict export control requirements under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to DLA contractors with an approved US/Canada Joint Certification Program certification who have completed the required training and questionnaires. All shipments must adhere to DLA packaging requirements RP001.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-R-0275

This is a sole source set-aside for an SBA Certified Women-Owned Small Business to establish an Indefinite Quantity Contract for a specific cable assembly used in F-15 Eagle aircraft. The contract consists of a five-year base period with no additional options, featuring an estimated annual demand of 16 units and a required delivery timeframe of 313 days to facilities within the Continental United States. Only vendors proposing the approved sources of supply, Safran Electrical Components USA, Inc. or Jo-Kell Inc., will be considered. Due to the critical nature of the application, the item is subject to strict export controls under ITAR and EAR regulations. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and be authorized by the DLA controlling authority to access technical data. The procurement process may involve a reverse auction, and proposals must be submitted to the bid custodian rather than through the DIBBS system.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XD57

Contract SPE4A6-26-R-XD57 is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 10 special purpose electrical cable assemblies, identified by NSN 5995-01-530-3551 and Caton Connector Corporation part number 2CA30982-2L6. This firm fixed price acquisition is structured as a bilateral indefinite delivery purchase order for stock buys with a base period of five years and an aggregate contract value up to 350,000 dollars. Delivery is required within 95 days after order, with inspection and acceptance occurring at the destination and shipping handled as FOB origin. The contract mandates strict adherence to various technical and quality requirements, including DLA packaging standards, physical identification marking, and the removal of government identification from non-accepted supplies. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Additionally, the use of mercury or mercury-containing compounds is prohibited in the hardware and packaging, except where specifically allowed for functional components like batteries or sensors. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XD14

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-R-XD14, is for the procurement of 21 units of a special purpose branched electrical cable assembly, identified by NSN 6150-01-633-1590. The requirement is a total small business set-aside and will result in a bilateral indefinite delivery purchase order for stock buys with a five-year base period and an aggregate ceiling of 350,000 dollars. Delivery is required within 90 days after receipt of order. Due to the nature of the technical data, this contract is subject to strict export controls under the International Traffic in Arms Regulations and the Export Administration Regulations, as well as DFARS 252.225-7048. Access to this technical data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Interested parties must be registered in SAM and submit quotations by the deadline of September 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

MANIFOLD, PNEUMATIC SENSOR

Solicitation # SPE4A6-26-R-0294

This procurement solicitation is for the acquisition of 79 pneumatic manifolds intended for use in F-16 aircraft, identified by NSN 6610-011491465. The requirement is restricted to approved original equipment manufacturers Rosemount Aerospace Inc. and Honeywell International, Inc. This is an unrestricted procurement where the government intends to negotiate with these specific approved sources. The contract includes a mandatory Government First Article Test, with a production delivery schedule of 417 days after receipt of order. Terms of delivery are FOB Origin, and inspection and acceptance will also occur at the origin. The solicitation is expected to be issued on or about September 2, 2026, with a response deadline of October 2, 2026. Interested parties may submit proposals or express interest and capability within forty-five days of publication. Because the items involve restricted data, contractors must be certified by the DoD to access unclassified data via DD Form 2345. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Interested vendors can access the full solicitation through the DLA Internet Bid Board Systems.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

in about 1 month