Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on February 24, 2011. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fly Ash Removal

Closed
FA8601-10-R-0057AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562111
New
Federal
Site Visit - Removal of Old Fluid Cell
Solicitation # 82247
The Maintenance Support Group at Robins Air Force Base, Georgia, requires a contractor to provide all labor, equipment, materials, and transportation to decommission, remove, and dispose of one Quintus ABB QFC 1.6 x 4-1400 fluid cell press located in building 140. The scope of work includes dismantling and rigging heavy components, such as a 148,000 lb unwound main cylinder and an 86,000 lb lower filler piece, relocating them to a designated on-base cutting site, reducing the materials to recyclable sizes, and hauling all scrap and debris off-base. The contractor is also responsible for restoring the work area and any cutting sites to their original pre-project conditions, ensuring they are free of industrial waste and grease. A critical requirement is the submission of a Draft Technical Removal Plan within 14 calendar days of the award, which must be formally approved by the Contracting Officer before any physical work begins. Operational constraints include a strict floor loading limit of 350 PSI on concrete floors and the requirement to secure daily DAF Form 592 hot work permits for any on-base cutting activities. Additionally, the contractor must maintain operational fire extinguishers at all cutting sites. This sources-sought opportunity, solicitation number 82247, includes a site visit scheduled for December 14, 2026, requiring visitors to provide identification and vehicle documentation at the Robins AFB Visitor's Center.
FA8571 Maintenance Contracting Afsc Pzim

POSTED

about 3 hours ago

DEADLINE

in about 2 months
NAICS: 562111
New
MI 2026-09 Waste Removal Collection Services
Solicitation # MI2026-09
Adams and Associates, Inc., operating on behalf of the U.S. Department of Labor, is soliciting bids for weekly waste removal and recycling collection services at the Miami Job Corps Center in Florida. The contract period runs from November 1, 2026, to October 31, 2027. The scope of work requires the provision and servicing of one 6-yard solid waste container twice weekly, two 8-yard solid waste containers twice weekly, one 8-yard recycling container twice weekly, and one 4-yard recycling bin once weekly. As a federally funded facility, the center is entitled to GSA pricing, and the agreement is subject to Service Contract Act regulations under Wage Determination No. 2015-4543. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and possess all necessary business and employee licenses for the State of Florida. Required insurance includes Workers Compensation, Automobile Liability, and Comprehensive General Liability of at least $1,000,000 per occurrence. Bids must be submitted on company letterhead by October 23, 2026, and include a detailed cost breakdown, W9, Vendor Questionnaire, and Authority to Commit. Award selection will be based on the most responsible bid rather than the lowest cost. Additionally, contractor personnel must adhere to strict center security protocols, including mandatory searches and a prohibition on fraternization with students and staff.
Miami Job Corps Center

POSTED

about 9 hours ago

DEADLINE

in 2 days

General Info

NAICS

562111 - Solid Waste Collection

Place of Performance

Wright Patterson Air Force Base, WPAFB, OH, 45433, USA

Set-Aside

SBA

Documents

8

9+09Gen++Environ++01+02+20.pdf

PDF

Amendment+to+FA8601-11-R-0085.pdf

PDF

ATCH+1+Instructions+to+Offerors_Fly+Ash+Removal.pdf

PDF

ATCH+2+Evaluation+Factors_Fly+Ash+Removal.pdf

PDF

FA8601-11-R-0085+Fly+Ash+Solicitation+Form+1449.pdf

PDF

Flyash+PWS+15+April+2010+%28FINAL%29.pdf

PDF

Questions+and+Answers.docx

DOCX

wage+determination+2005-2419+Rev+14.txt

TXT

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseClosed
Posted

Combined Synopsis

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts2 people available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Contacts
Alicia W. DavisContract Specialist
Shelley D DeardorffContracting Officer

Full Description

Show more
An Amenmdent to this Solicitation has been created and the new Proposal Due Date is 1 March 2011 1:00 PM Eastern Standard Time. This Amendment includes Indefinite Delivery Indefinite Quantity clauses and changes the Quantities to Estimated Quantities.

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, acting on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify capable sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are required for the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a fused-silica substrate, a 30 mm diameter, and a parabolic focus at 45 degrees. Technical specifications require an optical surface roughness of less than 1 nm RMS, a 20-10 scratch/dig specification, and polished backsides. The protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40 nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance testing, and documentation, including certificates of conformance and surface-measurement data. Delivery to Wright-Patterson Air Force Base must be completed within 98 calendar days after receipt of order, and the products must be warranted against defects for two years. Payment is structured as 100 percent after delivery with 30 days net terms. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026. This notice is for market research purposes only and does not constitute a solicitation or a commitment to award a contract.
Analytical Laboratory Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Sources Sought_Midwave Camera
Solicitation # FA860127Q0011
The Air Force Life Cycle Management Center, Installation Contracting Division, is conducting market research to identify potential sources capable of providing a 1.5-5 micron midwave camera and associated accessories for the Air Force Institute of Technology at Wright-Patterson Air Force Base, Ohio. This sources sought notice is for market research purposes only and is not a request for proposals. The government is seeking capabilities packages from all interested sources, including various small business categories, under NAICS code 334516. Interested firms must submit a concise capabilities package of no more than five pages by October 29, 2026, at 3:00 PM Eastern Time to the designated points of contact. The scope of work includes the delivery of the camera system, calibration of the instrument and lens, and the provision of a protective case. The contractor will be responsible for all transportation, loading, and onsite setup, with a required delivery timeline of no more than 90 days after contract award. Technical specifications include an operating temperature range of -10 C to 45 C and a two-year warranty against defects in material and workmanship. Payment is structured as 100% upon completion of all requirements on a net 30 basis, with invoicing processed through Wide Area Work Flow. The government is evaluating the potential for a small business set-aside and requires respondents to provide detailed information regarding their socio-economic status, ownership, and compliance with FAR clause 52.219-14 regarding limitations on subcontracting.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 236220
New
Federal
SABER FY 27-32
Solicitation # FA860126R0019
The United States Air Force is soliciting proposals for the Simplified Acquisition of Base Engineering Requirements (SABER) FY27-32, a 100% 8(a) small business set-aside IDIQ contract. The selected contractor will provide all management, labor, materials, equipment, and design capabilities to execute over 100 simultaneous projects involving maintenance, repair, and minor construction of real property at Wright-Patterson Air Force Base, Ohio. The scope includes work on buildings, roads, roofs, and utilities, as well as hazardous waste remediation and design-build services from concept to 100 percent design. The contract has a maximum ceiling of 160 million dollars, which increases to 175 million dollars if the option for extended services is exercised. Performance is expected to begin within 10 days of award and spans a total period of 1,825 calendar days. Award will be based on the Lowest Price Technically Acceptable (LPTA) process. Proposals must first pass compliance gates, including a requirement for the prime contractor to be a US-owned and operated company. Technical evaluations are conducted on a pass/fail basis, focusing on the management approach and project planning and execution. Pricing is structured using RS Means line items and coefficients. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Key requirements include adherence to Davis-Bacon Act wage determinations for Montgomery and Greene Counties, compliance with NIST SP 800-171 cybersecurity standards, and the provision of a minimum one-year warranty on all construction work.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS