Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FORCEPS, INTESTINAL

Active
SPE2DS-26-T-306SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item is a Meeker intestinal forceps with an overall nominal length of 10.75 inches and a right-angle design, intended for surgical use in intestinal procedures. It is identified by NSN 6515-01-499-5074 and sold in units of one each, with a single unit ordered under purchase request 7017314307. Delivery is required within 20 days after order award. The solicitation, numbered SPE2DS-26-T-306S, was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 for surgical and medical instrument manufacturing. The contract is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to occur in Hampton, Virginia. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. Additionally, the contract is subject to Covered Defense Information requirements, indicating that the item may involve sensitive or controlled data under federal procurement protocols.

General Info

Meeker intestinal forceps, 10.75 inches, right-angle, NSN 6515-01-499-5074, one unit, deliver in 20 days, DoD contract, Hampton, Virginia.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

23 SWEENEY BLVD, HAMPTON, VA, 23665, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-306S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
FORCEPS,INTESTINAL
FORCEPS,INTESTINAL
OVERALL LENGTH INCHES NOMINAL 10.750; MEEKER; UNIT
TYPE INTESTINAL; FORSEPS INTESTINAL MEEKER 10.75"
O/A LG ARTERY RT ANGLE; MEEKER ARTERY FORCEPS<(>,<)>
RIGHT ANGLE
UNIT OF ISSUE: EACH
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-499-5074 Quantity: 1 EA Purchase Request: 7017314307QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBING, TRANSDUCER
Solicitation # SPE2DS-26-T-306K
The item is a disposable A-line transducer tubing, 60 inches in length, designed for use with A-line transducers and equipped with a squeeze flush device. It is packaged in units of 20 each, identified by NSN 6515-01-500-7556, and must meet a strict shelf-life requirement of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The product is subject to DLA packaging standards and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Removal of government identification from non-accepted supplies is prohibited. The solicitation, issued under SPE2DS-26-T-306K, is for a single packaging unit with a delivery deadline of 20 days after award, and performance is required at Fort Bliss, Texas. The contract is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson listed as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306R
The contract pertains to the procurement of an invasive blood pressure transducer cable with a right-angle connector and Abbott interface, specifically for use with square transducers, supplied by ZOLL Medical Corporation under part number 8300-0788-01. The item is regulated by the FDA, requiring buyer confirmation via electronic referral and strict adherence to medical device procurement protocols. Each unit must be commercially packaged in sealed containers compliant with ASTM D3951 and fully labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The packaging must also meet DLA’s RF001 packaging requirements and be palletized per applicable standards. The National Stock Number is 6515-01-646-5170, with a quantity of seven units required at a unit price of $7.00, for a total of $49.00. Delivery is due within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon receipt at the delivery point. All supplies must be shipped via traceable freight methods, explicitly prohibiting parcel post. The delivery destination is HT1208 at Hurlbert Field, Florida, with government-only contact and identifying codes included for internal tracking. The solicitation number is SPE2DS-26-T-306R, issued under DLA’s authority, and all technical and quality requirements referenced via R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence over any other standards. The device is classified under NAICS 339112 for medical device manufacturing, and all bidders must clearly state the source and part number being supplied. The contract is set to close for responses on August 10, 2026, with a required delivery date of August 6, 2026, and is managed by the Department of Defense’s Medical Supply Chain organization with Chandler Alvarez as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
STETHOSCOPE
Solicitation # SPE2DS-26-T-305T
The contract specifies the procurement of 8 cartons of Littmann Classic III Stethoscopes, each featuring a machined stainless steel chest piece with dual tuning capability, a single-lumen tube measuring 27 inches, and both large and small tunable diaphragms measuring 1.7 inches and 1.3 inches respectively. The headset is constructed from aerospace alloy with anodized aluminum and includes soft ear tips for comfort, weighs 150 grams, and is free of latex and phthalates. All units must be packaged in sealed, damage-protective containers compliant with commercial standards and shipped in exterior containers suitable for safe delivery via common carrier to Fort Campbell, Kentucky, at the lowest possible rate. Marking must adhere strictly to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with documentation accessible via DLA Troop Support. Each bid must clearly state the supplier and part number, and the item is identified by NSN 6515-01-694-2560. The solicitation is governed by DLA’s Master List of Technical and Quality Requirements, with applicable standards including packaging, removal of government identification from non-accepted supplies, and potential handling of covered defense information. The response deadline is August 10, 2026, with a 20-day delivery requirement after award, and the contract falls under NAICS code 339112 for medical device manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, THORACIC
Solicitation # SPE2DS-26-T-305H
The contract specifies the procurement of thoracic catheters, 12 French, straight style, 20 inches in length, featuring four eyelets, individually sealed, non-porous, and constructed from polyvinyl chloride PVC, supplied in packs of ten per packaging group. The item is identified by NSN 6515-01-209-0703 and part number 8888580507 from Cardinal Health 200, LLC. Delivery is required within 20 days FOB destination, with no variance permitted in quantity, and inspection and acceptance occur upon delivery. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure protection against damage during transit using commercial-grade containers suitable for safe carrier shipment. All items must be marked and packaged in accordance with DLA requirements, including the removal of government identification from non-accepted supplies. The product is regulated by the FDA, requiring pre-award referral for confirmation. Technical and quality specifications referenced in the DLA Master List apply, and bidders must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-305H, issued by the Department of Defense, with responses due by August 10, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
DELIVERY KIT, OBSTETRIC
Solicitation # SPE2DS-26-T-306W
The Delivery Kit, Obstetrical is a disposable medical kit designed for normal deliveries in emergency and ambulance scenarios. It contains essential supplies including one pair of gloves, one drape sheet, two umbilical cord clamps, two OB towelettes, one disposable scalpel, one OB pad, one receiving blanket, six gauze sponges, one bulb syringe, four disposable towels, two nylon tie-offs, two alcohol preps, two twist ties, and one plastic bag. Each unit must be sealed in a protective container that safeguards contents from damage or breakage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the specified delivery point. All items must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must include manufacturer date, expiration date, contract number, and lot number on labels per MMS1A guidelines. The kit must have a minimum 24-month shelf life, with no more than three months elapsed between manufacture and government delivery. The unit of issue is each, and the NSN is 6515-01-343-2145 with a quantity of four units required. Delivery is due within 20 days of award. The solicitation is issued under SPE2DS-26-T-306W by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance at Barksdale AFB, and bids must include the source and part number. Technical and quality requirements are governed by the DLA Master List, and packaging must meet DLA standards.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CARD, RESPOND, COMBAT
Solicitation # SPE2DS-26-T-305F
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
DRAINAGE SYSTEM, EXT
Solicitation # SPE2DS-26-T-306C
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBE, SUCTION, SURGIC
Solicitation # SPE2DS-26-T-305J
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SYRINGE AND NEEDLE,
Solicitation # SPE2DS-26-T-305Q
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
ADMINISTRATION SET, INT
Solicitation # SPE2DS-26-T-305K
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESI
Solicitation # SPE2DS-26-T-306Y
The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325611
New
DIBBS
SANITIZER, HAND
Solicitation # SPE2DS-26-T-305X
The contract is for a hand sanitizer classified as a waterless cleanser with an alcohol base containing 70% ethyl alcohol, unscented, and packaged in 4 fluid ounce bottles. Each unit of issue is a package containing 24 bottles, and the total order consists of two such packages. The item must have a mandatory 36-month shelf life that is non-extendable, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the product must meet all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from any non-accepted supplies. The item is identified by NSN 8520-01-346-9200, with a delivery deadline of 20 days after contract award. The solicitation was issued under SPE2DS-26-T-305X, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the office in San Antonio, Texas. Primary point of contact is Mary-Kathryn Donahue, reachable via email and phone provided.
Soap and Other Detergent Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 327992
New
DIBBS
MEDICAL SUPPLY SET, OBS
Solicitation # SPE2DS-26-T-306G
The contract specifies the procurement of three Medical Supply Sets for Obstetrical Field Use, each containing a complete sterile kit designed for emergency obstetrical care. Each set includes sterile exam gloves, an obstetrical napkin, antiseptic towelettes, umbilical cord clamps, a disposable scalpel, a plastic apron, a 17x24 inch plastic-lined underpad, two 13x19 inch disposable towels, a 40x48 inch drape sheet, a plastic placenta bag, two plastic twist ties, a 2-ounce bulb syringe, four sterile 4x4 inch gauze sponges, a sterile foil baby bunting, and a newborn diaper, all packed in an OB box. The items are regulated by the FDA and must be supplied with full source and part number disclosure. Packaging and labeling must comply strictly with DLA’s Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to DLA packaging requirements RP001. Units must be individually sealed and shipped in commercial outer containers suitable for safe transit by common carrier under the lowest cost terms, with no parcel post permitted. Delivery is FOB destination with zero tolerance for quantity variance and a required delivery date of August 6, 2026. Two sets are destined for USS Ronald Reagan, and one for USS Zumwalt, with shipments required to be made via traceable means using DLA’s VSM system and RDD 777 protocol. All technical and quality requirements from the DLA Master List take precedence over commercial standards like ASTM D3951, and suppliers must confirm FDA compliance through EBS referral prior to award.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
DRY FIRE MAGAZINE, P
Solicitation # SPE2DS-26-T-306A
The dry fire magazine is a non-functional training aid designed exclusively for resetting the trigger assembly of a 9mm pistol during marksmanship drills. It has precise dimensional requirements: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches. It is incapable of holding any ammunition and serves solely as a mechanical training device to simulate magazine insertion and trigger manipulation without live rounds. The unit of issue is each, and the item is identified by NSN 6910-01-708-4254 with a procurement quantity of 20 units. This acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date. Removal of government identification from non-accepted supplies is mandated under RQ011. The contract solicitation, numbered SPE2DS-26-T-306A, was posted on August 4, 2026, with responses due by August 10, 2026. The procurement falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Delivery is required within 20 days of award, and performance is specified to occur at FPO, ZIP 96673. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-306U
The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-305W
The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details