Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on June 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Forestry and Parks - Request for Proposal - Night Vision Imaging Systems (NVIS) Helicopter with Video and Artificial Intelligence Capabilities - One (1) Intermediate Helicopter for Forest Operations

Closed
AB-2026-04146International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 488190
New
DIBBS
SKINThis contract pertains to the procurement of a critical application item, SKIN, with part number 65213-05010-108 and NSN 1560-LN-003-2333, for a quantity of two units, to be delivered FOB destination within 130 days from the contract date. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation issue date or award date depending on acquisition scale. Sampling must adhere to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major and acceptance requiring zero non-conformances unless otherwise stated. Packaging must comply with ASTM D3951 but is subordinate to DLA Master List requirements, and must be marked and labeled per MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001). No shelf life requirement applies, and Item Unique Identification is not mandated per the Service customer’s request. The item must be delivered to the designated DLA Fleet Readiness Center at Cherry Point, North Carolina, with inspection and acceptance occurring at the destination. Price, quantity, and delivery terms are fixed with zero variance allowance, and the contract specifies detailed shipping and parcel post addresses for coordination.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
NAICS: 488190
New
DIBBS
COVERThis contract, issued under solicitation number SPEFA5-26-T-0926 by the DLA Fleet Readiness Center, outlines the procurement of seven units of item NSN 9330-LL-NC0-1645, identified as Urethane Innovators Inc P/N SH-60, at a unit price of $7.00 for a total value of $49.00. Delivery is required within twelve days of contract award, with FOB destination terms, and inspection and acceptance will occur at the delivery point. The material has no shelf life requirement, and all packaging must comply with ASTM D3951 as well as MIL-STD-129 for marking and labeling, with palletization strictly adhering to DLA’s RP001 packaging requirements. Any technical or quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. Sampling is mandated to follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The unit of issue is each, with quantity variance set at zero percent. The delivery address for parcel post and freight is specified as the Fleet Readiness Center in Cherry Point, North Carolina, with an original delivery deadline of June 30, 2026. The contract also references MIL-STD-130N for identification marking of U.S. military property and mandates compliance with all applicable DLA requirements as defined in the authoritative online master list, with revisions controlled by the solicitation or award date depending on acquisition type.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
NAICS: 488190
New
DIBBS
CONNECTORThe contract pertains to the procurement of a connector identified by NSN 5935-LN-003-5698 and part number 8011-00003, with a quantity of ten units to be delivered within five days of order. Delivery is FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and fully adhere to DLA’s Master List of Technical and Quality Requirements, which supersedes all other standards, including mandatory marking and labeling per MIL-STD-129. Palletization must follow DLA Packaging Requirements for Procurement. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unit of issue is each, and no shelf life applies. Item Unique Identification is not mandated per customer request. The connector must be shipped by the fastest traceable means, explicitly excluding parcel post, to the specified government delivery and freight addresses at Naval Air Station Jacksonville. The required delivery date is July 21, 2026, with a contract data reference to solicitation SPEFA3-26-T-0322 issued by the Defense Logistics Agency under NAICS code 488190, and all technical and quality mandates are governed by the DLA Master List in effect on the solicitation issue date.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
NAICS: 488190
New
DIBBS
MOUNTThis contract pertains to the procurement of one unit of a critical application item identified as MOUNT with NSN 1560LLNC17132 and part number 65213-06005-048, manufactured for SIKORSKY AIRCRAFT CORPORATION. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging and labeling must strictly follow MIL-STD-129, with palletization adhering to RP001: DLA Packaging Requirements for Procurement. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise stated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The item has no shelf life requirement. The contract specifies delivery within 144 days FOB destination, with inspection and acceptance occurring at the destination point. The unit of issue is each (EA), with no variance permitted in quantity. The delivery address for parcel post is PSC 8021, Cherry Point NC, while freight must be shipped to Building 148, Bay C, Beachey Road, Cherry Point NC. The material must be marked and labeled in full accordance with mandatory DLA and DoD standards, and the unit of issue must align with the official ANSI X12 reference. The solicitation number is SPEFA5-26-T-0924, issued on July 19, 2026, with responses due by July 27, 2026, and the original required delivery date is March 8, 2027. The contracting office is the DLA Fleet Readiness Center, with Larry Kemp listed as the primary point of contact.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
NAICS: 488190
New
DIBBS
ANGLEThe contract pertains to the procurement of a single unit of item NSN 1560-LN-003-5695, designated by SIKORSKY AIRCRAFT CORPORATION part number 70202-26002-118, under solicitation SPEFA3-26-T-0320. The item is not subject to Item Unique Identification requirements per DFARS 252.211-7003(c)(1)(i), and has no shelf life limitation. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, which supersede all other standards including ASTM D3951. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be verified at levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, while palletization standards are strictly enforced, and parcel post is prohibited in favor of traceable shipping methods. Delivery is required FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The required delivery date is July 21, 2026, with a five-day lead time from award, and the item must be shipped via the fastest traceable means to either the parcel post address or freight shipping address at Naval Air Station Jacksonville. The Unit of Issue is each (EA) with a total price of $1.00. The contract mandates compliance with all DLA directives, including those governing packaging, marking, and documentation, and all specifications not explicitly overridden by the DLA Master List remain under the jurisdiction of the applicable technical standards. Government use fields indicate processing codes, distribution identifiers, and advisory information relevant to logistics and tracking within the Department of Defense supply chain.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 8 days
NAICS: 488190
New
DIBBS
INDICATOR, LIGHTThe contract specifies the procurement of four units of an indicator, light, with NSN 6210-01-623-7769 and part number 6981ED166-020208, to be delivered FOB destination within 20 days of contract award. The delivery is destined for USS MICHAEL MONSOOR DDG 1001 at APO AP 96694, with strict packaging requirements mandating compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while DLA Master List technical and quality requirements take precedence. All packaging and palletization must adhere to RP001 DLA packaging standards, and no parcel post is permitted—shipment must be via the fastest traceable means under DLA Procurement Note C19 and C20. Quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Sampling may use attribute or variable inspection methods at the manufacturer’s discretion unless the contract dictates otherwise. The item must be physically identified per RQ017, and any non-accepted supplies must have government identification removed per RQ011. All technical and quality requirements referenced by R or I numbers derive from the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract prohibits quantity variance and requires inspection and acceptance at destination. The solicitation number is SPE4A6-26-T-07NR, with a response deadline of July 27, 2026, and the point of contact is Larry Ferguson of the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
NAICS: 488190
New
DIBBS
FRAMEThis contract, issued by the DLA Fleet Readiness Center under solicitation SPEFA5-26-T-0925, specifies the procurement of two units of a component identified by NSN 1560-LL-NCB-5629 and part number 205-031-669-030 from Bell Textron Inc. The delivery is due in 117 days from the award date, with FOB destination terms requiring delivery to the specified facility in Cherry Point, North Carolina. Zero variance is permitted in quantity, and acceptance occurs upon arrival at the destination. Packaging must strictly comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements take precedence over other specifications. The item has no shelf life limitation and must be identified per MIL-STD-130N dated November 16, 2012. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The unit of issue is each, with a total contract value of $4.00, and all labeling and packaging must reflect the specified Unit of Issue and Quantity per Unit Pack. The original required delivery date is January 20, 2027, and the contract calls for compliance with all applicable defense standards and DLA directives for procurement and identification.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 3 hours ago

DEADLINE

in 8 days
NAICS: 488190
New
DIBBS
International Military Logistics & Freight ManagementThe contract encompasses full-service international freight management for the secure and compliant delivery of goods to Sweihan Air Base in the United Arab Emirates, covering all logistics phases from origin to final destination. It includes end-to-end coordination of transportation, customs clearance in both export and import jurisdictions, adherence to strict military marking and labeling regulations, and real-time cargo tracking to ensure accountability and transparency throughout the supply chain. Delivery is structured under FOB destination terms, meaning the contractor assumes responsibility for all risks and costs until the goods are officially received at the designated military facility. The scope of work falls under the NAICS code 488190, indicating it is a specialized subcontract within the international freight forwarding and logistics sector, managed under the Defense Logistics Agency of the Department of Defense. While no specific solicitation number or set-aside details are provided, the contractual obligation is clearly tied to fulfilling the logistical needs of a U.S. military installation abroad, requiring precision in documentation, regulatory compliance, and coordination with military authorities. Performance is site-specific to Sweihan Air Base, and the contractor must be fully equipped to navigate the complexities of international military logistics, including armed forces regulations, security protocols, and time-sensitive delivery requirements without the use of standard commercial delivery benchmarks.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A

AI Contract Overview

Show more

The Province seeks an intermediate helicopter equipped with night vision imaging systems, video capabilities, and artificial intelligence operations to support wildfire suppression efforts across Alberta. Acceptable models include the EC135, AS350B3, AS355F2, EC145/H145, A119 Koala, H125, BK177B/C/D, Bell 429, and other specified variants, with alternative models considered upon written inquiry to the Contracting Manager. The helicopter must be owned by the proponent at the time of proposal submission and accompanied by all required documentation as outlined in the tender attachments. The aircraft will be stationed throughout Alberta and may be relocated or exported outside the province with minimal notice and for indefinite durations to meet operational demands. The contract guarantees 100 consecutive days of service per year, with no guaranteed flight hours during the core period, and is initially awarded for one year plus 100 days, with the option for a one-year extension. The solicitation, identified as AB-2026-04146, was posted on June 1, 2026, with responses due by June 12, 2026, and is managed by the Government of Alberta’s Forestry and Parks division under NAICS code 488190.

General Info

One intermediate helicopter with NVIS and AI support wildfire suppression in Alberta, one-year contract.

Agency

Government of Canada → Forestry and ParksView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

Alberta, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Forestry and Parks
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Forestry and Parks
View Agency Profile
Office AddressN/A
Contacts
Kent JenningsContracting Authority

Full Description

Show more
For the primary purpose of wildfire suppression, the Province requires the services of one(1) intermediate helicopter with night vision imaging systems (NVIS) , Video and Artificial (AI) operations capability. Acceptable helicopter models include: EC135 AS350B3 AS355F2, N, NP EC 145/H145 AS350B3+ A119 Koala H125 BK177B, C, D Bell 429 H125BLR A119 Koala MK2 AS350B2 AS350SD1, SD2, FX2 Other helicopter models may be considered at the discretion of the Province. Please submit a written inquiry to the Contracting Manager regarding all inquiries specific to equivalent models. The helicopter will be positioned as required throughout Alberta, and may be exported outside the province if required. The helicopter may be repositioned with minimal notice and for indefinite periods of time. The Province will guarantee 100 consecutive days for each helicopter, in each year of the Contract. There are no guaranteed flying hours during the Core Period. The contract will be for one (1) year and 100 days with the possibility of a one (1) year extension of the contract. Proponents must be in possession of the proposed helicopter(s) at the time of their Proposal submission with the appropriate documentation as outlined in Attachment #1 to Appendix C to this RFP.