Forestry/Brush pumper truck

Combined Synopsis/Solicitation For the Purchase of Forestry/Brush pumper truck At Red River Army Depot (I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will NOT BE ISSUED. (II) Solicitation W911RQ20QX145 is issued as a Request for Quote (RFQ). (III) This solicitation incorporates provisions and clauses for commercial items in effect through Federal Acquisition Circular 2005-56, and local terms and conditions. (IV) This acquisition is reserved for small business concerns. The associated NAICS code for this acquisition is 441110; PSC code is 2320; Small Business size standard is 500 Employees. (V) DESCRIPTION OF THE REQUISITION: PURCHASE OF and delivery of a new Forestry/Brush pumper truck (VI) SCHEDULE OF SUPPLIES/SERVICES: CLIN 0001 - Purchase and delivery of a new Forestry/Brush pumper truck Purchase of: 2020 FORD F250 SRW 4X4 CREW CAB XL 160 WB STYLSIDE OR EQUEL and KIMTEK CORPORATION FIRELITE FDHP-306-200 OR equivalent IAW the Purchase description. The purchase shall be completed and delivered as one unit with the pump being installed prior delivery. All scheduling and deliveries of materials shall be coordinated with the POC for this action. The POC shall be identified upon contract award. (VII) This Combine Synopsis is for the purchase and delivery a new Forestry/Brush pumper truck. (VIII) FOB Destination point is: Red River Army Depot, Texarkana, TX 75507 (IX) BASIS OF AWARD: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, CONTRACTOR'S QUOTE MUST BE GOOD FOR 30 CALENDAR DAYS AFTER SUBMISSION CLAUSES 52.212-1 Instructions to Offerors -- Commercial Items 52.212-2 Evaluation -- Commercial Items. 52.212-3 Offeror Representations and Certifications -- Commercial Items. 52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.212-5 Contract Terms and Conditions required to implement statutes or Executive Orders Commercial Items (Jan 2017) 52.252-2 Clauses Incorporated By Reference FEB 1998 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016 252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials SEP 2014 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) LOCAL TERMS AND CONDITIONS: ENVIRONMENTAL MANAGEMENT SYSTEM RRAD has implemented an Environmental Management System (EMS), which is based on ISO-14001, and is concerned about environmental issues. RRAD desires to conduct its business operations in an environmentally sound manner. Relevant significant aspects will be communicated to contractors (including those used for outsourcing) and suppliers through the bid package where applicable. RRAD expects its suppliers and contractors to provide, at the same quality and price, products and services that have the least environmental consequence of all available options. Wherever possible, where a supplier's product is causing a significant environmental aspect at RRAD, RRAD will communicate to that supplier that they should select the available option that minimizes the potential environmental impact of that product. Any contractor with plans to be working six months or longer at RRAD must receive EMS awareness training and information on operational controls where applicable. This training is thirty minutes induration and will be provided by RRAD. A copy of the RRAD Environmental Policy can be viewed on the Depot Website via the Internet. DELIVERIES TO RED RIVER ARMY DEPOT (RRAD) (a) Effective October 1, 2015 ALL Delivery Appointments must be made through CAS (Carrier Appointment System) at least 24 hours prior to desired delivery date. Carriers arriving without an appointment will experience delays. Carriers can register for CAS at https://eta.sddc.army.mil/ETASSOPortal/Default.aspx. (b) GPS Address is 100 Armory Drive New Boston, TX 75570. Automated directions 903-334-3060. (c) If you do not have access to CAS at this time, you may contact Timothy Hill @ 903-334-1245 for assistance in making an appointment. At this time, 903-334-1242 is not being utilized for appointments. (d) Sensitive/TPS shipments, DODAAC SV3227 will load/unload at Bldg. 595 telephone number 903 334 3295, FAX Rep-ship for classified material to 903 334 3620 or DSN 829-3620 or ddrt-repship@dla.mil. DLA RRAD does not accept 1.4S shipments of any kind. (e) Effective 1 Aug 2015, prohibited items not allowed on depot: firearms, explosive, ammunition, propane over 20 LBS, fuel containers over 5 gallons, illegal knives. Drivers must clear a NCIC Background check for entry onto the facility. (f) SW3227/W562RM do not accept USPS shipments. 4008 BIDS FOR OTHER THAN F.O.B. DESTINATION Bids submitted on a basis of other than f.o.b. destination will be rejected as nonresponsive. INSPECTION AND ACCEPTANCE (Apr 1994) Red River Army Depot Texarkana, Texas (TACOM)HQ-AMC LEVEL PROTEST PROCEDURES (OCT 2013) Complete AMC Protest Procedures can be found at: http://www.amc.army.mil/amc/commandcounsel.html An agency protest may be filed with either the contracting officer or to HQAMC but not both following the procedures listed on the website above. SECURITY REGULATIONS (Aug 27,2013) (a) All contractors, subcontractors, and their employees are responsible for complying with the following regulations: (1) Items forbidden on the depot include "strike anywhere" matches, alcoholic beverages, narcotics, photographic equipment, unauthorized tools, firearms, explosives and illegal knives (stilettoes, switchblades, hook blades, and blades over three inches in length). (2) Personnel will not retain passes and badges upon job completion or termination, enter depot in an intoxicated condition, fight, gamble, picket, or create a disturbance. Failure to return badges will cost your firm $50.00 per badge. (3) Contractor will ensure that all contractor employees comply with all applicable fire, safety, and security requirements and adhere to all applicable state and federal labor laws and regulations. (b) General Instructions: (1) All depot traffic regulations will be observed. (2) Predetermined work routes will be followed with no deviation. (3) All personal vehicles and containers are subject to search and confiscation of unauthorized items while on the depot (with or without presence of owner). (4) Notorious misconduct off the depot may be sufficient grounds for denying entrance to the depot. (5) POV'S must have a minimum insurance coverage and state inspection sticker, in accordance with Texas State Laws. (6) All personnel will adhere to all depot fire, safety, security, and other applicable regulations. (7) Vehicles owned by commercial firms or common carriers must display a magnetic or other type sign/placard, visible on both sides of the vehicle. (8) All commercial carriers will enter the depot through the Commercial Motor Vehicle Access Control Point (CVO ACP). SUBMISSION OF INVOICES ELECTRONIC CONTRACTING (AUG 2015) (a) All Army Contracting Command - Warren solicitations will be publicized on the Federal Business Opportunities website (https://www.fbo.gov). Any additional attachments, including Technical Data Packages (TDPs) when available electronically, will be separate attachments or links embedded in the solicitation. (b) As of 10 August 2015, unless directed to do otherwise in Section L of this solicitation, vendors are required to submit a quote or proposal via the Federal Business Opportunities (FBO) system. Proposals or quotes submitted after this date using any other mechanism, including the Army Single Face to Industry Bid Response System (ASFI BRS) may be deemed non-responsive. (c) Requirements for the online FBO bid submission: (1) Vendors must log into the FBO System to be able to submit electronic responses for opportunities. (2) Vendors must be registered in the System for Award Management (SAM) at www.sam.gov (a Federal Government owned and operated free web site) and have a CAGE Code and CCR Marketing Partner Identification Number (MPIN). (3) Once logged into the FBO System, vendors will be asked to enter basic information and directed to upload one or more files containing the proposal/quote and any additional information as outlined in the solicitation. (4) FBO will send an email to vendor's registered email address confirming the electronic submission. (5) For additional information on submitting electronic bid responses via the FBO system see the FBO Vendor Guide - Section 4.3.1 "Submitting an Electronic Response" (https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf). Note to offerors: (d) Please pay close attention to the Issued By block location on the cover page of the solicitation for closing date and time. The closing date and time is based on the local time of the listed location of the Issued By office. In accordance with FAR 15.208(a), offerors are responsible for submitting proposals, and any revisions, and modifications, so as to be received by the Government office designated in the solicitation by the time specified. (e) It is the responsibility of the Offeror to ensure the proposal/quote is received by the date and time specified on the cover page of this solicitation. In accordance with FAR 15.208, if the proposal/quote was not received at the initial point of entry to the Government infrastructure (in this case, received through FBO) by the exact date and time specified on the cover page of this solicitation, it will be determined late. Proposal/quote is defined to mean ALL volumes or parts required in the solicitation are included in the electronic submission. Note: There is no "expected" or "target" length of time for proposal submission; size and content may be factors, therefore offerors are strongly cautioned when submitting proposals to allow adequate time for submission. (f) Solicitations may remain posted on the FBO after the solicitation closing date. If the response deadline has passed for the solicitation, vendors will no longer be able to submit electronic responses. (g) Any award issued as a result of this solicitation will be distributed electronically. In the event of a FOIA request for a copy of any award issued as a result of this solicitation, or any subsequent modifications to the contract, the contract and modifications will be released, including the awarded unit price. This is the notice required by Executive Order 12600 (June 23, 1987) of the Government's intention to release unit prices in response to any request under the Freedom of Information Act (FOIA), 5 USC 552. Unit price is defined as the contract price per unit or item purchased as it appears in Section B of the contract and is NOT referring to nor does it include Cost or Pricing data/information. If an Offeror objects to such release in the base contract or contract modifications, the Offeror must notify the contracting officer in writing prior to the closing date identified in this solicitation and include the rationale for the objection consistent with the provisions of FOIA. A release determination will be made based on rationale given. (h) Questions pertaining to this solicitation should be directed to the Contract Specialist identified on the cover page of this solicitation. For technical assistance in doing business with the Government, and doing business electronically, please visit the Procurement Technical Assistance Center (PTAC) website at http://www.aptac-us.org/ to locate a regional center. (IX) All information relating to this solicitation, including, changes/amendments, questions and answers, will be posted on the following website: http://www.FBO.gov. Formal communications such as request for clarifications and/or information concerning this solicitation must be submitted in writing via e-mail to the address below. Terms of the solicitation and specification remain unchanged unless the solicitation is amended in writing by the Contracting Officer. If an amendment is issued, normal procedures relating to the acknowledgement and receipt of solicitation shall apply. Award can only be made to contractors registered in SAM. Offers are due on or about 14 MAY, 08:00 PM CST. All responsible sources that submit a response, if timely received, shall be considered by the agency. Emailed quotes will be accepted at aeron.p.miller.civ@mail.mil. Point of Contact for this solicitation is Aeron Miller at (903) 334-2025.