Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Freight and Transportation Services

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Freight and Transportation Services involves the transport of 87 units of material for prime contractors supporting DLA supply contracts. The scope of work requires hauling materials from the point of origin to a specified destination, with performance taking place in Tracy, California. All ocean freight must comply with U.S.-flag vessel requirements unless an approved waiver is obtained. The contractor is responsible for providing final invoice representations and comprehensive freight documentation, including the gross weight and the ports of loading and discharge. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 483111.

General Info

Subcontract for transporting 87 material units in Tracy, California for DLA supply contracts.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

483111 - Deep Sea Freight Transportation

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9232.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUD, PLAIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs transport of materials for prime contractors on DLA supply contracts. Hauls 87 units of material from point of origin to destination. Utilizes ocean freight in compliance with U.S.-flag vessel requirements or approved waivers. Provides final invoice representations regarding ocean transportation and freight documentation including port of loading, discharge, and gross weight. Delivers materials to the specified destination.

Similar Contracts

Same NAICS industry code

U.S.-Flag Ocean Freight ForwarderThis subcontract involves providing U.S.-flag ocean freight forwarding services for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes coordinating the transportation of cargo, specifically transformers, from the port of loading to the final discharge port using heavy-lift shipping equipment. The service provider is responsible for managing all MARAD reporting and ensuring that rated on board vessel operating carrier ocean bills of lading are delivered within 30 days of shipment. Managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, the contract falls under NAICS code 483111. Performance is centered in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 16, 2026, as specified in the solicitation posted on November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Specialized Ocean Transport Vessel (FLO-FLO/Float-on Float-off)This subcontract through the Department of Defense and Mschq Norfolk requires a U.S. Flag, self-sustaining transport ship to support prime contractors on Military Sealift Command projects. The primary objective is the loading, transport, and discharge of two Ancillary Surface Craft from Mobile, Alabama to Okinawa, Japan. Operations must utilize specialized float-lift or float-on float-off configurations to execute last-on, first-off cargo sequences. All loading and towing activities must strictly adhere to the US Navy Towing Manual to ensure the safe delivery of the craft to the destination port. The opportunity falls under NAICS code 483111 and was posted on November 5, 2026, with a response deadline of November 9, 2026.

POSTED

about 17 hours ago

DEADLINE

TANKER VOYAGE CHARTER

Solicitation # N3220527R6019

Solicitation N3220527R6019 is a firm-fixed-price request for a Tanker Voyage Charter issued by Military Sealift Command Norfolk for performance in Turkey. The government will award the contract to the responsible offeror who provides the lowest price for a technically acceptable proposal, evaluated based on vessel capability, experience, operational controls, and past performance. The pricing structure consists of a lump sum freight rate and a per-day pro rata demurrage rate, with a total of 192 hours of laytime permitted free of expense to the charterer. The government may exercise options to extend the period of performance for up to six months. The vessel must adhere to strict safety and quality standards, including compliance with IMO regulations and the International Safety Guide for Oil Tankers and Terminals. Technical requirements include the provision of Certificates of Quality for the last three cargoes and adherence to MIL-STD-3004-1 for cargo tank preparation. All tanks must be certified gas free by a qualified Marine Chemist. Vessels must be part of the Ship Inspection Report (SIRE) System, with at least one inspection conducted within six months of the commencement of laydays. Administrative requirements include electronic invoicing via Wide Area Work Flow and the submission of a Small Business Subcontracting Plan for large businesses. Proposals are due by November 12, 2026.

POSTED

about 17 hours ago

DEADLINE

Ancillary Surface Craft (ASC) Shipping

Solicitation # N32205-SS-N103-27-014

The Military Sealift Command Norfolk, Strategic Sealift Program Support Office N103A has issued Sources Sought Notice N32205-SS-N103-27-014 to conduct market research for the shipping of Ancillary Surface Craft (ASC). The project involves transporting craft with a displacement of 500 short tons, an overall length of 169.54 feet, and a beam of 31.46 feet from Mobile, Alabama, to a U.S. military port in Okinawa, Japan. The available load date is scheduled for January 5, 2027, with laydays from January 4 through January 8, 2027. The government requires a fixed-price arrangement where the contractor provides all necessary cradle, cribbing, blocking, and seafastening for ocean transport, utilizing timbers no less than 6 inches by 6 inches. All planning, towing, and loading operations must adhere to the US Navy Towing Manual. To ensure cargo safety, proposed vessels must feature specialized float-lift or FLO/FLO configurations; open-ocean towed barges and standard lift ships without conforming lift capabilities are strictly excluded. Interested respondents must provide comprehensive vessel descriptions, execution plans, and lump-sum pricing, along with their company's Unique Entity Identifier and small business status under NAICS code 483111. Responses must be submitted via email to Jordan Morrison by 10:00 AM Eastern Time on November 9, 2026. This notice is for market research purposes only and does not constitute a formal solicitation or a commitment to contract.

POSTED

about 17 hours ago

DEADLINE

TUGCON; OPEN-OCEAN TOW

Solicitation # N3220527R6016

Solicitation N3220527R6016 is a firm-fixed-price spot charter request issued by Military Sealift Command Norfolk for the provision of up to two U.S. Flag, Jones Act, Ocean-Going Certified Tugs. The scope of work involves two separate tows departing from Naval Station San Diego, California: the ex-FORT WORTH (LCS-3) to be delivered to INACTSHIPS Bremerton, Washington, and the ex-LAKE ERIE (CG-70) to be delivered to INACTSHIPS Pearl Harbor, Hawaii. This acquisition is a total small business set-aside conducted under FAR Part 12 simplified procedures, with award based on the lowest price, technically acceptable offer. Contractors are required to submit a comprehensive towing package for approval, including transit plans and steady state tow line tension calculations, and must provide position reports twice daily in port and four times daily at sea. Technical evaluation focuses on vessel capability, compliance with classified requirements, and adherence to the U.S. Navy Towing Manual and COLREGS Rules of the Road. The evaluated price is computed as a lump-sum freight rate plus one day of demurrage. Invoicing is managed electronically via Wide Area Work Flow, and the government maintains the right to inspect vessels and equipment both prior to award and throughout the performance period to ensure continuing suitability.

POSTED

about 17 hours ago

DEADLINE

in about 11 hours

DRY CARGO TIME OR VOYAGE CHARTER

Solicitation # N32205-SS-N321-27-015

The Military Sealift Command Norfolk, Strategic Sealift Program Support Office, is conducting market research for a dry cargo time or voyage charter to transport nine CV-22 aircraft. The mission involves transit between San Diego, California, and Iwakuni, Japan, with a performance period commencing on January 31, 2027. The required vessel must be a CV-22 NAVAIR certified Roll-on/Roll-off (RO/RO) vessel capable of carrying at least 17,000 square feet of military cargo, including helicopters, wheeled vehicles, and breakbulk. Specific technical requirements include a 20ft door for aircraft access and a total laytime of four days SSHEX for the entire mission. Load and discharge operations are to be conducted on a Free In and Out Stowed and Shipped (F.I.O.S.S.) basis. This Request for Information (RFI) is for market research purposes and does not constitute a formal offer. Interested parties under NAICS code 483111 must provide company details, including their Unique Entity Identifier, CAGE code, and business size. Submissions must include comprehensive vessel descriptions, including stern ramp door and main deck height clearances, and the number of supercargo the vessel can accommodate. Depending on the charter type, respondents should provide daily hire rates and fuel consumption for time charters, or lumpsum and demurrage rates for voyage charters. Responses are due via email to Brandon Page by November 12, 2026.

POSTED

about 17 hours ago

DEADLINE

CFR Karachi Maritime TransportThis subcontract agreement involves the provision of ocean freight transport services for import projects managed by Pakistan State Oil Company Ltd. The selected contractor is responsible for providing a pressurized LPG carrier vessel to transport 20,000 MT of LPG Mixture from the point of origin to the port of Karachi under CFR terms. To ensure operational safety and legality, the vessel must maintain all necessary maritime safety certifications and strictly comply with international shipping laws as well as specific Karachi port regulations. The project is categorized under NAICS code 483111, with a response deadline set for November 18, 2026.

Pakistan State Oil Company Ltd

POSTED

about 22 hours ago

DEADLINE

Freight and Shipping Services (FOB Origin)This subcontract for Freight and Shipping Services involves the transportation of hardware for prime contractors supporting DLA Weapons Support Maritime Hardware and Electrical contracts. The scope of work includes managing the pickup of components from suppliers and coordinating ocean transportation specifically using U.S. flag vessels to ensure full compliance with Department of Defense requirements. The service provider is responsible for delivering components to the designated government destination and must adhere to all MARAD reporting standards. Key administrative requirements include providing a rated on board vessel operating carrier's ocean bill of lading that specifies the contract number, vessel name, and port details. The project is associated with the Department of Defense and the DDSP New Cumberland Facility, falling under NAICS code 483111. Performance will take place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

International Freight and Ocean Transportation ServicesThis subcontract for International Freight and Ocean Transportation Services involves the ocean transport of electronic components for prime contractors fulfilling DLA supply contracts. The selected provider is responsible for securing U.S.-flag vessels to move shipments from the point of origin to the final discharge port. The contractor must ensure all shipments are rated on board using the vessel operating carrier's ocean bills of lading. Additionally, the provider is required to report gross weight and freight costs in strict accordance with MARAD and DFARS 252.247-7025 regulations to ensure compliance with Department of Defense standards.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

MIL-STD-129 Packaging and Marking ServicesThis subcontract involves providing specialized military marking and palletization services for prime contractors supporting DLA Weapons Support contracts. The scope of work requires the application of markings in accordance with MIL-STD-129, specifically utilizing Special Marking Code 14 for Center of Balance, and ensuring all packaging adheres to RP001 DLA Packaging Requirements for Procurement. The final deliverable is a fully marked and packaged armor window. The project necessitates the use of industrial palletization equipment and heavy-duty crating suitable for armor transport. Performance will take place in Mechanicsburg, Pennsylvania, under the agency oversight of the Department of Defense DLA Weapons Support Land Supplier Opns Vehicle Spt. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

MIL-STD-2073-1 Kit Packaging and Marking ServicesThis subcontract for MIL-STD-2073-1 Kit Packaging and Marking Services involves providing specialized preservation, packaging, and marking support for prime contractors on DLA supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1 Appendix D for kit packaging, MIL-STD-129 for markings, and RP001 standards for palletization. All packaging materials must comply with military specifications to ensure the integrity of the kits. The final deliverables consist of fully packaged and palletized kits ready for shipment to the DDSP New Cumberland facility. This project falls under NAICS code 483111 and is managed through the Department of Defense. The performance of these services will take place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Request for Information (RFI) – Market Research for Ocean Transportation of Hazardous Waste (Guam to CONUS)

Solicitation # RFI_22D0016_483111

The Defense Logistics Agency is conducting market research through a Request for Information to identify qualified ocean carriers capable of transporting government-generated hazardous waste from Guam to the United States West Coast. This effort seeks to determine the commercial availability and operational capacity of U.S.-flagged vessels, specifically those that are coastwise-endorsed or operating under the statutory Guam trade exemption. The government is evaluating industry capability to handle a diverse range of Department of War waste streams, including RCRA-regulated hazardous waste, contaminated liquids, used oil, batteries, and contaminated solids. These materials are typically consolidated into 40-foot shipping containers or ISO tank containers for bulk liquids and fall under DOT/IMDG hazard classes 2, 3, 4, 5, 6, 8, and 9. The operational requirement specifies a minimum weekly throughput of two 40-foot containers, with a shipping window designated as present to indefinite. Interested partners must demonstrate legal certification to transport the specified hazardous materials and provide details regarding their Jones Act compliance and maximum weekly volume capacity. Responses must be submitted electronically to the designated points of contact within twenty calendar days of publication. This RFI is intended solely for market research to inform future acquisition strategies and statutory compliance determinations and does not constitute a formal solicitation or a commitment to award a contract.

DLA Disposition Services - Ebs

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Critical Application Sleeve Bearings (P/N HS5445-1)This subcontract involves the procurement and delivery of four specialized sleeve bearings, part number HS5445-1, sourced from the Roller Bearing Company of America, Inc. These components are intended for prime contractors delivering to the Department of Defense under the DLA Weapons Support ASC Commodities Division. Due to the nature of the equipment, the items must adhere to Critical Application Item quality standards. The contract requires the submission of receiving reports through the Wide Area Workflow system. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 332510. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Plain Rod End Bearing Supplier (NSN 3120014551641)This subcontract involves the supply of five inspected plain rod end bearings for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing NSN 3120014551641, also known as GE part L31302G02, which is classified as a Configuration Control Item. All deliverables must adhere to strict military standards, including marking per MIL-STD-130N and packaging requirements according to MIL-DTL-197M and MIL-STD-2073-1E. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The performance of this contract is centered in San Diego, California, under NAICS code 332991. Responses to this opportunity are due by November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 12 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

about 12 hours ago

DEADLINE

Manufacturing of Critical Application Machine Bolts (MS35764-261)This subcontract involves the manufacture of 1,104 critical application machine bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to MS35764H, MIL-DTL-45912C, and TDP Rev A Gen 1 specifications using precision machining, with a strict prohibition on additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332722. The contractor must ensure full compliance with the Berry Amendment and maintain a quality system that adheres to either SAE AS9003 or ISO 9001 standards. Final deliverables must be packaged and labeled in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The response deadline for this requirement is November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-00-718-0835)This subcontract involves the procurement of 3,908 blind rivets to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing rivets that strictly adhere to Part Number CCR274SS-3-6 and NSN 5320-00-718-0835, ensuring compliance with the DLA Master List of Technical and Quality Requirements. Notably, the use of additive manufacturing is prohibited for this contract. All deliverables must be packaged according to ASTM D3951, RP001, and MIL-STD-129 standards. The final shipment of 3,908 units is to be delivered FOB Origin to Tinker AFB, Oklahoma. This requirement falls under NAICS code 332510 and is managed by the Department of Defense.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-00-269-0783)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 8,627 socket head cap screws. The components must strictly adhere to NSN 5305-00-269-0783 specifications, with marking and packaging requirements governed by MIL-STD-129 and MIL-STD-2073-1E respectively. All units are to be delivered to a designated destination point for final inspection and acceptance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in Albany. Interested parties must respond by November 13, 2026, to provide these essential supplies for prime contractors supporting DLA Weapons Support supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Nonmetallic Grommet Manufacturer (Fuel Vent Line)This subcontract involves the manufacture of 21 nonmetallic grommets for fuel vent lines to support prime contractors on DLA Weapons Support ASC projects. The components must be fabricated according to basic drawing 78286 65307-03016 and NSN 5325-00-060-5294 using either precision molding or machining processes. Performance will take place in Cherry Point, and the final delivery must consist of 21 finished and inspected units. To qualify, the manufacturer must maintain a quality management system that complies with SAE AS9003 or ISO 9001 standards and strictly adhere to the Buy American program. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Defense Packaging and Shipping ServicesThis subcontract for Defense Packaging and Shipping Services involves providing specialized military-grade packaging for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 111 retaining rings in strict accordance with MIL-STD-129, RP001, and ASTM D3951 standards, utilizing approved MIL-SPEC materials and labeling equipment. The contractor is responsible for coordinating FOB Origin shipping to the DLA Distribution Depot Oklahoma located at Tinker AFB. This project falls under NAICS code 488510 and is managed by the Department of Defense.

Freight Transportation Arrangement

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Retaining Rings (NSN 5325002570209)This subcontract involves the manufacture of 111 precision retaining rings for the DLA Weapons Support ASC Commodities Division, specifically for NSN 5325002570209. All components must be produced in strict accordance with part standard AN996 Rev 2 using precision machining equipment, as additive manufacturing is explicitly prohibited. The final delivery consists of 111 finished and inspected rings to be performed at Tinker AFB. To qualify, the manufacturer must maintain a quality management system compliant with SAE AS9003 or ISO 9001. Additionally, the contractor is required to adhere to Buy American standards and meet NIST SP 800-171 cybersecurity requirements. The response deadline for this opportunity is November 13, 2026.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS