Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Fuel Metering Pump Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract obligates the supplier to provide one fuel metering pump identified by NSN 2910015692881 and part number 3190677 for delivery to Fort Irwin, California, no later than July 30, 2026. The item must fully comply with all technical and performance specifications mandated for military use and must be shipped using a traceable transportation method to ensure accountability and verification of delivery. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a NAICS code of 333996 indicating it falls under other miscellaneous manufacturing. The solicitation is dated July 16, 2026, and the delivery location is specifically designated, though no further details on the point of contact or exact shipping address are provided. All fulfillment must adhere strictly to the terms outlined to ensure operational readiness at the designated military installation.

General Info

Supplier must deliver one fuel metering pump to Fort Irwin, CA by July 30, 2026, meeting military specs.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX26FB335.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP, FUEL, METERING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of one fuel metering pump (NSN: 2910015692881, P/N: 3190677) to Fort Irwin, CA, by July 30, 2026. Item must meet specifications and be shipped via traceable method.

Similar Contracts

Same NAICS industry code

Supplier of Circulating Fans (P/N 2673213-P4)This subcontract involves the manufacture or sourcing of 18 circulating fans, part number 2673213-P4, to support prime contractors delivering on DLA Troop Support contracts. The units must strictly conform to Basic Drawing NR 10001 2673213, Revision L, and be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. The supplier is required to adhere to rigorous quality and safety standards, including Critical Application Item quality assurance and DFARS 252.223-7001 regarding hazardous materials. Additionally, all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The opportunity is categorized under NAICS code 333996 for the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Supply of Tube Axial Fans (NSN 4140016054003)This subcontract involves the procurement of 42 Tube Axial Fans, identified by NSN 4140016054003, to support prime contractors fulfilling DLA supply contracts. The hardware must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. Delivery of the units is designated as FOB Origin. The contract is associated with the Department of Defense, specifically the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. The procurement falls under NAICS code 333996, with a response deadline set for November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Centrifugal Fan (NSN 4140-00-289-9235)This subcontract involves the manufacture and supply of one AC Centrifugal Fan, part number CC5A4W6CW-NS, for prime contractors supporting Department of Defense supply contracts. The unit must be fabricated to 440 volts, 3 phase, 60 cycles specifications in accordance with TDP Rev A Gen 1 and MIL-PRF-19004B(1). All items must feature markings compliant with MIL-STD-130N and MIL-STD-129, and the use of additive manufacturing is strictly prohibited. The contractor is required to ensure full compliance with the Buy American Act and the Berry Amendment. The final deliverable consists of one completed and packaged fan delivered FOB Origin. This requirement is managed through the DDSP New Cumberland Facility under NAICS code 333996, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Hand-Driven Hydraulic Ram PumpsThis subcontract involves the manufacturing of 66 complete hand-driven hydraulic ram pump assemblies under NSN 4320-01-460-3685 for the DLA Weapons Support Nuclear Reactor Program. The scope of work requires precision machining and assembly conducted in strict accordance with restricted source engineering drawings and design control activity specifications. To meet the rigorous standards of this critical application, the contractor must ensure full mercury-free compliance and perform all necessary quality testing. The project is designated as a Total Small Business Set-Aside under NAICS code 333996 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the established timeline, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1719

Solicitation SPE7M1-27-T-1719 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of two rotary pumps, identified by NSN 4320014850766 and Oberdorfer Foundries Inc part number OBN990RS15. This item is designated as a Navy field level reparable item, requiring configuration control per MIL-STD-973. The contract specifies a delivery window of 20 days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The procurement includes strict technical and quality requirements, incorporating the DLA Master List of Technical and Quality Requirements and prohibiting the use of Class I ozone depleting chemicals. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act and cybersecurity standards under DFARS 252.204-7012. Quotes are to be submitted via DIBBS, and the government may utilize a HUBZone price evaluation preference for the award.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M0-27-T-0822

Solicitation SPE7M0-27-T-0822 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of five spring loaded shaft seal assemblies. The required items are identified by NSN 4320013670755 and manufacturer part number 5290-4017 from Fluid Conditioning Products, Inc. This is designated as a critical application item. The delivery is specified as FOB Origin with a required delivery date of October 28, 2026, and must be shipped to the NAVAIR Voyage Repair Team at Naval Station Mayport, Florida. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates various FAR and DFARS clauses covering fixed-price changes, destination inspection, and the Buy American Act. Special requirements include the prohibition of mercury and hexavalent chromium, as well as stringent cybersecurity compliance under DFARS 252.204-7012. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and may be submitted through DIBBS.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

PUMP, HYDRAULIC RAM, HAN

Solicitation # SPE7M2-27-T-0508

This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program under solicitation number SPE7M2-27-T-0508, is for the procurement of 66 hand-driven hydraulic ram pumps (NSN 4320-01-460-3685). The requirement is designated as a critical application item and is a restricted source item requiring engineering source approval by the government design control activity. The procurement is a total small business set-aside under NAICS code 333996, with a required delivery date of June 29, 2027, and a delivery lead time of 220 days after receipt of order. Shipping is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including DLA packaging requirements (RP001), MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. A specific restriction is placed on the use of mercury or mercury-containing compounds, except where functionally required. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and Berry Amendment. All quotations must be submitted through the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

Axial Piston Pump Supplier (NSN 4320015236824)This subcontract involves the supply of two axial piston pumps for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The pumps must strictly adhere to NSN 4320015236824 specifications, with a specific prohibition against the use of additive manufacturing. The supplier is required to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements, ensuring all items are packaged according to MIL-STD-2073-1E and MIL-STD-129 standards for delivery to DLA Distribution San Joaquin in Tracy. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333996. Interested parties must submit their responses by November 9, 2026, to meet the requirements of the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Centrifugal Pump Impeller Manufacturer/SupplierThis subcontract involves the manufacture and supply of centrifugal pump impellers for prime contractors supporting the Defense Logistics Agency Weapons Support Maritime Supply Chain. The supplier is responsible for providing parts that strictly adhere to NSN 4320015798741 specifications, ensuring that all materials are free from intentionally added mercury. All deliverables must be packaged and marked in accordance with RP001 and MIL-STD-129 standards and delivered as one unit per the DLA Master List. The contractor must maintain full compliance with FAR and DFARS regulations, specifically regarding cybersecurity and domestic sourcing requirements. Performance for this contract is centered in Tracy, California, under NAICS code 333996. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Hydraulic Pump Parts Kits (NSN 4320013022543)This subcontract involves the sourcing and provision of eight hydraulic pump parts kits under NSN 4320013022543 for prime contractors supporting the Defense Logistics Agency Weapons Support Maritime Supply Chain. The selected supplier is responsible for ensuring all components meet strict regulatory standards, specifically adhering to MIL-STD-129 for marking and shipment and complying with the Buy American Act as outlined in DFARS 252.225-7001. The performance of this contract will take place in New Cumberland, Pennsylvania, with items packaged for Government-Arranged Transportation via the FDT program. The opportunity is categorized under NAICS code 333996, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1005

Solicitation SPE7M1-27-T-1005, issued by the DLA Weapons Support Maritime Supply Chain, is a fixed-price procurement for 13 units of a spring-loaded shaft seal assembly, identified by NSN 4320014390131. This is a restricted source, critical application item requiring engineering source approval from the government design control activity, specifically referencing Shapes Group Ltd Co. part number 5750008-003. The required delivery date is October 17, 2027, with a need ship date of April 13, 2027, and a delivery lead time of 168 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specific environmental restrictions, including the prohibition of intentionally added mercury and Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted through the DIBBS portal, and the government will not evaluate items produced via additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-27-U-0956

Solicitation SPE7M1-27-U-0956 is an Indefinite Delivery Contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 38 pump shaft sleeves, identified by NSN 4320-01-400-3351. The requirement specifies adherence to Navy Drawing 803-6962399, with specific material and dimensional requirements detailed across sheets 4, 4.1, and 16. Delivery is required within 120 days after receipt of the order, with offers submitted based on FOB Origin under the First Destination Transportation program. Inspection and acceptance are both conducted at the origin. The contract mandates strict compliance with several technical and security standards, including CMMC Level 2 certification and NIST SP 800-171 assessment requirements. Technical and quality standards are governed by the DLA Master List, while packaging must follow ASTM D3951 and marking must comply with MIL-STD-129. Due to the nature of the technical data, export controls under ITAR or EAR apply, requiring approved US/Canada Joint Certification Program certification for access. This is not a small business set-aside, and award evaluation will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 5 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 5 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

about 5 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Hydraulic Pumping Unit Supply

Defense Logistics Agency

POSTED

DEADLINE

Centrifugal Pump Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Hydraulic Pump Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Rotary Pump Manufacturing and Supply

MARITIME SUPPLY CHAIN

POSTED

CLOSED

PUMP, FUEL, ELECTRICA

Solicitation # SPE7L126FAU3P

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4AX26F289K

Defense Logistics Agency

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT

Solicitation # SPE7M1-26-T-213K

MARITIME SUPPLY CHAIN

POSTED

CLOSED

PUMP, CENTRIFUGAL

Solicitation # SPE7M1-26-T-192Z

Defense Logistics Agency

POSTED

DEADLINE

PUMP, HYDRAULIC

Solicitation # SPE7L126FAU0N

Defense Logistics Agency

POSTED

DEADLINE

IMPELLER, PUMP, CENTRIFUGAL

Solicitation # SPE7L126FAU0S

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL TRANSFER

Solicitation # SPE7LX26FB507

Defense Logistics Agency

POSTED

DEADLINE

PUMP, HYDRAULIC

Solicitation # SPE7M1-26-T-217A

MARITIME SUPPLY CHAIN

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS