Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Fuel Oil and Charge Air Cooler Supplier

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Fuel Oil and Charge Air Cooler Supplier, involves the manufacture and supply of specialized cooling assemblies for prime contractors working on Alaska Energy Authority projects. The scope of work specifically requires the delivery of two fuel oil cooler assemblies and one charge air cooler assembly, both of which must meet designated BTU/Hour capacity specifications. Managed under the State of Alaska Department of Commerce, Community, and Economic Development, the contract falls under NAICS code 333998. A critical requirement for this engagement is strict adherence to Build America, Buy America (BABA) compliance standards.

General Info

Supply of BABA compliant fuel oil and charge air coolers for Alaska projects.

Agency

State of Alaska → Commerce, Community, and Economic Development

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

AK, USA

Set-Aside

NONE

Documents

This scope was carved out of 26092.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Levelock & Hughes M&I Engine Generator & Accessories Purchase-RFQ

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 4

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyState of Alaska → Commerce, Community, and Economic Development

ContactsNo contacts available

OfficeN/A

Organization / AgencyState of Alaska → Commerce, Community, and Economic Development

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized cooling assemblies for prime contractors on Alaska Energy Authority projects. Manufactures or supplies heat exchangers meeting specific BTU/Hour capacities, specifically fuel oil cooler assemblies and charge air cooler assemblies. Requires BABA compliance. Delivers two fuel oil cooler assemblies and one charge air cooler assembly.

Similar Contracts

Same NAICS industry code

ASTM Type I/III Water Treatment Skid FabricationThis subcontract involves the engineering, fabrication, and supply of modular, skid-mounted pure-water treatment systems for facility projects at North Dakota State University. The scope of work includes the integration of valves and instrumentation, as well as comprehensive factory testing of all assembled equipment to ensure operational readiness before delivery. All delivered systems must strictly adhere to ASTM Type I and Type III water-quality criteria. Interested parties should note that the response deadline for this opportunity is November 17, 2026.

POSTED

about 10 hours ago

DEADLINE

NDSU - ASTM Type I and Type III Pure Water System Replacement

Solicitation # SRC000467

North Dakota State University is soliciting proposals under solicitation number SRC000467 for the replacement of its existing pure-water treatment system. The project requires a qualified offeror to provide a complete, integrated ASTM Type I and ASTM Type III pure-water generation and distribution support system, including a 500-gallon Type III and 250-gallon Type I storage tank. The scope of work encompasses all professional services, engineering, fabrication, controls, testing, commissioning, and training. The successful contractor must ensure the system meets specific water-quality criteria and must complete the project by the final deadline of June 15, 2027. Proposals must be submitted electronically via the NDBuys portal by November 17, 2026, at 2pm CT. Submissions are divided into a technical envelope and a financial envelope. Evaluation is based on a 100-point scale, with 80 points allocated to the technical proposal and 20 points to the cost proposal. A mandatory minimum of ten years of applicable experience is required for eligibility. The procurement process is managed by Procurement Officer Casie Ewalt, and the award will be based on a combined weighted score of technical and cost factors.

POSTED

about 10 hours ago

DEADLINE

Ground Support Equipment (GSE) ProviderThis subcontract agreement establishes a partnership for the provision of ground support equipment and related services for prime contractors supporting Massachusetts State Police POLAIR aircraft projects. The scope of work includes the delivery and operational maintenance of critical equipment such as aircraft tow tractors, ground power units, and hydraulic jacks. To ensure operational safety and reliability, the provider must adhere to strict safety standards for ground operations and provide all necessary manufacturer certifications. The contract is managed by the POLAIR MSP Air Wing in Massachusetts, with performance centered in Framingham. Interested parties must submit their responses by November 30, 2026, in accordance with the solicitation posted on October 20, 2026. The engagement is categorized under NAICS code 333998, focusing on the specialized delivery of operational GSE and ongoing maintenance services to support aviation projects.

POLAIR - MSP Air Wing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Fuel Delivery Station (FDS) System IntegrationThis subcontract for the Department of Defense, specifically Mschq Norfolk, involves the system integration of a Fuel Delivery Station for prime contractors working on Military Sealift Command tanker projects. The scope of work includes the supply and installation of one operational port-side station equipped with double hose probe rigs, constant tension spanwire winches, and passive safety slip-clutch devices. To ensure operational readiness and compliance, the contractor must perform Factory Acceptance Trials and Installation Weight Tests in accordance with NTTP 4-01.4 and MIL-STD-1399/301 standards. The project is categorized under NAICS code 333999 and has a response deadline of November 3, 2026.

POSTED

about 13 hours ago

DEADLINE

Specialized Hangar Systems / Maintenance Equipment SupplierThis subcontract opportunity through the Department of Defense, specifically the W074 Endist Wilmington, involves the supply and installation of specialized equipment for aircraft hangars and maintenance facilities. The scope of work focuses on supporting prime contractors on USACE AFSOC projects by providing and commissioning critical hangar-specific systems, including specialized lighting, power, and compressed air. All provided equipment and installations must strictly adhere to AFSOC maintenance facility standards. The successful contractor will be responsible for the full lifecycle of the systems, from delivery to final commissioning, ensuring that all maintenance facility systems are fully operational and compliant with agency requirements.

W074 Endist Wilmington

POSTED

about 13 hours ago

DEADLINE

HPAC Input Module Hardware SupplyThis subcontract involves the manufacture and procurement of replacement input modules for the number one and number two High Pressure Air Compressors supporting prime contractors at the Norfolk Naval Shipyard. The selected supplier is responsible for delivering submarine-specification hardware FOB Destination to the performance site in Portsmouth, ensuring all components strictly adhere to NAVSEA technical specifications. In addition to hardware requirements, the contractor must maintain full compliance with DFARS cybersecurity standards for suppliers. This effort falls under NAICS code 333998 and is managed through the Department of Defense for the Norfolk Naval Shipyard.

Norfolk Naval Shipyard Gf

POSTED

about 13 hours ago

DEADLINE

in about 16 hours

Selective Laser Sintering (SLS) 3D Printer

Solicitation # W6399-27-SS20/A

The Department of National Defence is seeking the acquisition of one Selective Laser Sintering (SLS) 3D printer, with options to procure up to two additional units, for high-performance manufacturing, prototyping, and tooling. The equipment must be new, off-the-shelf hardware capable of processing engineering-grade thermoplastics such as Polyamide 11, Polyamide 12, Polypropylene, and TPU, with a minimum build volume of 150 x 150 x 300 mm. The requirement includes software licenses for at least three years that can function without an internet connection and must meet North American power standards of 120V at 60Hz. All units and associated consumables must be delivered and installed at Canadian Forces Base Petawawa, Ontario, no later than March 31, 2027, under Delivered Duty Paid (DDP) Incoterms 2020. This is a fixed-price defence contract governed by the Defence Production Act. Award will be based on the lowest evaluated price among offers that meet all mandatory technical criteria specified in the solicitation. Proposals must include an offer submission form, an offeror declaration form, and a financial proposal inclusive of all customs duties and taxes. The contractor is required to adhere to environmentally preferable packaging standards, ensuring materials are reusable, returnable, or recyclable. Additionally, the contractor must certify that the work is not produced using forced labour, as the government maintains the right to terminate the contract for defaults related to human trafficking or forced labour violations.

Department of National Defence

POSTED

about 20 hours ago

DEADLINE

Six-column Mobile Lift System

Solicitation # W6897-27-0514

The Department of National Defence is soliciting offers for the supply, delivery, installation, commissioning, and virtual training of a new six-column mobile vehicle lift system for CFB Suffield in Alberta. The system must be current production equipment capable of lifting vehicles weighing at least 103,000 to 108,000 lbs. Key technical requirements include CSA or cUL certification, compatibility with standard Canadian electrical power systems, and the inclusion of rechargeable batteries and charging accessories. Essential safety features must include emergency stop controls on each column, automatic mechanical locking devices, overload protection, a safety stop system for obstructions, and emergency lowering capabilities during power failure. This fixed-price contract is open to Canadian suppliers and those from applicable trading partners, with an award based on the lowest evaluated price among compliant offers. Deliverables must be shipped Delivered Duty Paid to Building 163 at CFB Suffield, with a requested delivery date of January 2027. The successful contractor must provide virtual training via platforms such as Microsoft Teams, Zoom, or Cisco Webex within five business days of delivery. Additionally, the procurement mandates environmentally preferable packaging that is reusable, returnable, or recyclable. Compliance is strictly monitored, including prohibitions against forced labour and human trafficking in the supply chain.

Department of National Defence

POSTED

about 20 hours ago

DEADLINE

High Resolution, Lithographic 3D Printing System for Metals, Ceramics and Polymers

Solicitation # 25-58227 B

The National Research Council Canada (NRC) is seeking a high resolution, lithographic 3D printing system for metals, ceramics, and polymers to support research activities at the Advanced Materials Research Facility in Mississauga, Ontario. The required system must utilize slurry feedstock and be capable of printing individual or multi-material configurations, supporting at least two distinct materials within a single layer or between layers. Key technical specifications include a minimum build volume of 70 x 40 x 150 mm and an integrated, automated, programmable material-change cleaning system. All electrical equipment must be certified under the Canadian Electrical Code, Part 1. The system must be delivered and installed on-site within five months of the contract award. This open tender, solicitation number 25-58227 B, is subject to various international trade agreements and the NRC Integrity Regime. The contract will be awarded to the responsive bidder offering the lowest evaluated price, provided they meet all mandatory technical criteria. Proposals must be submitted electronically as two separate attachments, a Technical Offer and a Financial Offer, to the NRC Bid Receiving Unit by October 13, 2026, at 2:00 PM EDT. Bidders must adhere to strict submission guidelines, including a 10MB email limit and a prohibition on zip files. Payment will be made as a fixed lump sum in CAD upon successful inspection and acceptance by Canada.

National Research Council of Canada

POSTED

about 20 hours ago

DEADLINE

Change Maker SupplierThis subcontract agreement establishes a partnership for the supply of automated change-making machines to support prime contractors on City of Dallas procurement projects. The supplier is responsible for providing hardware that meets all city specifications and ensuring the equipment is delivered FOB to designated sites. To ensure compliance and safety during on-site setup, the supplier must maintain active General Liability and Workers Compensation insurance. This procurement opportunity is categorized under NAICS code 333998 and is managed through the City of Dallas.

POSTED

DEADLINE

Trash Compactor Equipment SupplierThis subcontract opportunity is for a Trash Compactor Equipment Supplier to provide commercial-grade industrial compactors for prime contractors working on City of Savannah waste management projects. The selected supplier will be responsible for the manufacturing, sourcing, and delivery of these units to designated city sites, ensuring that all equipment strictly adheres to ANSI/OSHA industrial safety standards for waste equipment. The solicitation was posted on October 19, 2026, with a response deadline of November 3, 2026. Operating under NAICS code 333998, this contract focuses on the procurement and delivery of specialized industrial machinery to support municipal waste infrastructure within the state of Georgia.

City of Savannah

POSTED

DEADLINE

Trash Compactor - Event No. 12610

Solicitation # PE-62551-NONST-2026-000000242

The City of Savannah is soliciting bids for a trash compactor under solicitation number PE-62551-NONST-2026-000000242, also identified as Event No. 12610. This opportunity was posted on October 19, 2026, for performance within the state of Georgia. A pre-bid meeting via Microsoft Teams is scheduled for October 27, 2026, at 2:00 PM to address potential questions or issues. All bids must be submitted electronically through the official supplier portal at www.savannahga.gov/bids by the deadline of 1:30 PM on Tuesday, November 3, 2026. The City of Savannah promotes equal opportunities for all vendors, and the Board of Purchase maintains the right to reject any proposals or waive formalities. Primary contact for this solicitation is Tiffany Daniels.

City of Savannah

POSTED

DEADLINE

More opportunities from State of Alaska → Commerce, Community, and Economic Development

Same awarding agency

Marine Engine Shop Load Testing ServicesThis subcontract for Marine Engine Shop Load Testing Services involves performing standard commercial shop load testing for prime contractors working on Alaska Energy Authority projects. The scope of work requires conducting continuous eight-hour operation load tests at increments of one half, three quarters, full, and 110 percent of the rated load. Additionally, the contractor is responsible for performing electronic compression tests, cylinder misfire tests, and laboratory lube oil analysis utilizing a commercial engine load bank. The selected provider must deliver comprehensive documentation, including detailed load test reports, cylinder cutout results, and lube oil analysis reports. This opportunity is associated with the State of Alaska Department of Commerce, Community, and Economic Development under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Stainless Steel Exhaust Flex Connector FabricationThis subcontract involves the fabrication and supply of a custom stainless steel exhaust flex connector for prime contractors working on Alaska Energy Authority projects. The scope of work requires the production of a single, continuous 18-inch long flexible connector featuring a turbocharger mating connection at one end and a 5-inch ANSI 125/150# pattern flange at the other. The contractor is responsible for providing the completed assembly along with all necessary supporting hardware, including gaskets, bolts, v-clamps, and 90-degree elbows. This project is managed under the State of Alaska Department of Commerce, Community, and Economic Development and falls under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Tier 3 Marine Diesel Engine SupplierThis subcontract, issued by the State of Alaska Department of Commerce, Community, and Economic Development, requires the supply of one new John Deere 6090 AFM 85 Tier 3 Marine engine. The engine is intended for prime contractors working on Alaska Energy Authority projects and must be specifically configured for generator drive applications. Technical specifications include 298 hp, 210 ekW prime, a 14 inch diameter flywheel, an SAE 1 adapter, and 24 VDC starting and control voltage. To meet compliance standards, the unit must be Tier 3 Marine certified and must not be equipped with EGR, DOC, DPF, or SCR emissions equipment. The successful supplier is responsible for the delivery of one complete engine FOB to Anchorage, Alaska. This procurement falls under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Akiak M&I Engine Purchase

Solicitation # 27022

The Alaska Energy Authority is soliciting bids for the purchase of one 298 HP John Deere 6090 AFM 85 Tier 3 Marine engine, including all required modifications and accessories. The engine must be a new Tier 3 Marine certified unit and must not be equipped with EGR, DOC, DPF, or SCR emissions equipment. Key deliverables include a 18-inch stainless steel exhaust flex connector and a complete set of bound operation and maintenance manuals. As an additive alternate, bidders may provide an 8-hour shop load test with accompanying reports and analysis. The equipment is to be delivered FOB destination to the AEA Warehouse in Anchorage, Alaska. The award is based on the best net price, with a critical delivery requirement of no more than 12 calendar weeks after the contract award. Bidders must provide manufacturer data and catalog literature in a single PDF file, along with federal assurances. The fabricator must demonstrate extensive experience in packaging diesel engine driven electrical generators and maintain a competent service organization for field calls. Payment for the agreement will be made within 30 days of delivery or receipt of services. Compliance with the Davis-Bacon Act, the Americans with Disabilities Act, and specific Alaska state laws regarding consumer electrical products is required. This solicitation is exempt from Buy America Preferences for Infrastructure Projects.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

CIPLINK COOK INLET POWER LINK-HVDC PROJECT- RFI

Solicitation # 27025

The State of Alaska, through the Alaska Energy Authority and the Department of Commerce, Community, and Economic Development, is seeking information and prequalification for the Cook Inlet Power Link High Voltage Direct Current Project. This solicitation focuses on identifying qualified parties capable of providing both the supply and installation of submarine cables. This process is intended strictly for procurement planning and information gathering to establish technical and budgetary pricing. It does not represent a formal invitation to bid or a commitment to enter into a contract, and the Alaska Energy Authority maintains the right to modify or cancel the request at its discretion.

Power and Communication Line and Related Structures Construction

POSTED

DEADLINE

Industrial Equipment Packaging and FreightThis subcontract for Industrial Equipment Packaging and Freight involves providing specialized packaging and delivery services for prime contractors working on Alaska Energy Authority projects. The scope of work includes applying waterproof covers and securing heavy equipment onto forklift-compatible skids to ensure safe transportation to various destinations within Alaska. Operating under FOB Destination terms, the contractor is responsible for the safe delivery of all equipment directly to the project sites. This effort is managed under the State of Alaska's Department of Commerce, Community, and Economic Development, falling under NAICS code 484220.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Generator Components and Accessories SupplierThis subcontract, titled Generator Components and Accessories Supplier, involves the procurement and kitting of loose generator accessories for prime contractors working on Alaska Energy Authority projects. The scope of work focuses on providing various components necessary for the field installation of existing units, with the final deliverable consisting of one lot of loose ship generator accessories. Managed under the State of Alaska's Department of Commerce, Community, and Economic Development, the contract falls under NAICS code 335999. A critical requirement for this engagement is strict adherence to Build America, Buy America (BABA) compliance standards.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

John Deere Engine Supplier/ModifierThis subcontract involves the supply and modification of John Deere model 4045TFM85 engines to support prime contractors working on Alaska Energy Authority projects. The primary scope of work entails performing shop modifications to configure these engines for the repowering of existing generators, ensuring the final delivery of one complete shop-modified engine equipped with all specified accessories. The contract is managed under the State of Alaska Department of Commerce, Community, and Economic Development. To ensure regulatory and quality standards are met, the engines must maintain Tier 3 Marine certification and adhere strictly to Build America, Buy America Act compliance.

Carburetor, Piston, Piston Ring, and Valve Manufacturing

POSTED

DEADLINE

Skid-Mounted Engine Generator ManufacturerThis subcontract involves the fabrication and testing of skid-mounted engine generators for prime contractors working on Alaska Energy Authority projects. The scope of work includes shop fabrication of skids, engine and generator integration, installation of 24 VDC starting and control systems, and comprehensive load testing to verify performance ratings. The final deliverable consists of two fully tested units accompanied by complete operation and maintenance manuals. Strict adherence to technical and regulatory standards is required, including Tier 3 Marine certification and compliance with UL, NEC, IEEE, NEMA, and ANSI standards. Additionally, all final assembly must be performed within the United States to satisfy Build America, Buy America requirements. The project is managed under the State of Alaska Department of Commerce, Community, and Economic Development.

Motor and Generator Manufacturing

POSTED

DEADLINE

Levelock & Hughes M&I Engine Generator & Accessories Purchase-RFQ

Solicitation # 26092

Solicitation RFQ 26092, issued by the Alaska Energy Authority for the State of Alaska, seeks a vendor to provide long lead items for the RPSU M&I projects at Hughes and Levelock. The scope of work includes the procurement of two skid-mounted engine generators, one shop-modified John Deere 6068AFM engine for repowering, one charge air cooler assembly, two fuel oil cooler assemblies, and a lot of loose ship generator accessories for field installation. All equipment must be new, unused, and meet Tier 3 Marine certification and applicable UL, NEC, IEEE, NEMA, and ANSI standards. The contract requires the vendor to perform load testing and specific packaging and marking procedures, including the use of waterproof covers and forklift-compatible skids, to ensure safe delivery via FOB destination. This procurement is subject to strict federal and state compliance requirements, including the Build America Buy America Act (2 CFR 184), requiring final assembly to be performed in the United States. Vendors must submit a signed Debarment Certificate and a Build America Buy America Certificate with their quotes. Depending on the final contract value, the award may be subject to the Davis-Bacon Act for prevailing wages and the Contract Work Hours and Safety Standards Act. Evaluation is based on the ability to meet detailed technical specifications, with a requirement for full descriptive literature for any comparable products offered. The award process allows for the consolidation of small quotes of 50 dollars or less at the state's discretion.

Motor and Generator Manufacturing

POSTED

DEADLINE

Actuarial Services

Solicitation # 223974

The State of Alaska, through the Department of Commerce, Community, and Economic Development, is soliciting proposals for professional actuarial services to support the Division of Insurance. This solicitation, identified by number 223974, seeks qualified actuarial firms capable of delivering a diverse range of specialized services to assist the agency in its regulatory and operational functions. The contract is designated for performance within the state of Alaska. Interested firms can find further details and submission guidelines through the official state procurement portal.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Policy Research Analysis and Data VisualizationThis subcontract, titled Policy Research Analysis and Data Visualization, supports prime contractors on projects for the Alaska Industrial Development and Export Authority under the State of Alaska Department of Commerce, Community, and Economic Development. The primary objective is to transform raw research data into actionable insights by identifying trends and policy implications through the use of statistical software such as SPSS, SAS, or R. The selected provider will be responsible for creating complex visual representations of data using Tableau or Power BI, alongside preparing executive briefings and written summaries for stakeholders. Final deliverables include comprehensive analysis reports, processed datasets, and visualization materials in PDF format. The contract is categorized under NAICS code 541611 for administrative management and general management consulting services.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS