This Solicitation opportunity from Government of Canada was posted on February 3, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Fuel Tank for Emergency Services Helipad – Jasper National Park

Closed

5P468-22-0242/AInternational

Submission Closed02/07/2023, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The scope of work covers five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation, and Vocational buildings. The selected contractor must conduct a site survey to verify door dimensions and fire ratings, supply Grade I heavy-duty panic bars and associated hardware, and perform at least 10 consecutive cycle tests to ensure fail-safe operation. All installations must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and Americans with Disabilities Act (ADA) standards. This is a fee-for-service subcontracting opportunity set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Bidders must self-certify under NAICS code 238290 and submit a lump sum price along with individual pricing per deficiency by December 1, 2026. Required submission documents include a completed bid sheet, a supplier packet with a W-9 and self-certification form, and three references for similar projects. The contract is subject to various Federal Acquisition Regulations, including prevailing wage requirements under the Davis-Bacon Act and Executive Order 14026, as well as strict government guidelines regarding information security and the protection of sensitive data.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Conveying SystemsThis subcontract opportunity is for the installation, modernization, or repair of elevators, lifts, and other conveying systems for the Town of Winchendon School Department facility projects. The selected contractor will work under prime contractors to deliver fully certified and operational systems. A mandatory requirement for this engagement is DCAMM Certification in Conveying Systems. The project is located in Winchendon, Massachusetts, under NAICS code 238290. Interested parties must submit their responses by the deadline of November 24, 2026.

TOWSD21 - School Department

POSTED

DEADLINE

Kitchen Elevator Upgrade and Repair Service - NHSP-M

Solicitation # RFP NHDOC 2027-07

The New Hampshire Department of Corrections is soliciting proposals for a firm fixed price or not-to-exceed contract to provide comprehensive upgrades and repairs for a 1985 Dover Corporation passenger elevator at the New Hampshire State Prison for Men. The elevator, which serves two floors of the kitchen and has a 4,000-pound capacity, requires a new power unit including the motor, hydraulic valve, pump, oil reservoir, and muffler, as well as the installation of four security key switches and eight keys. All work must be performed by New Hampshire licensed professionals and comply with all local, state, and federal elevator codes, with final safety test results submitted to the New Hampshire Department of Labor. The project is expected to start in January, with a final completion deadline of June 30, 2027. Proposals are due by 2:00 PM EST on November 13, 2026, and must be submitted as separate sealed technical and cost proposals. Evaluation is based on a combined score of the technical proposal, which focuses on organizational experience, correctional facility expertise, and approach, and the cost proposal. Award selection may involve a Best and Final Offer process. Selected vendors must maintain significant insurance coverages, including commercial general liability of at least 1 million dollars per occurrence, and adhere to strict correctional facility security protocols, including tool inventories and compliance with PPD 371. Payment will be issued within 30 days of receiving approved monthly itemized invoices.

Department Of Corrections

POSTED

DEADLINE

Mechanical Installation & RiggingThis subcontract for Mechanical Installation and Rigging involves the removal and installation of centrifuge conveyors for prime contractors working on City of Haverhill wastewater treatment projects. The scope of work includes the disassembly and hauling of old conveyors, as well as the rigging and hoisting of new systems using precision alignment tools to ensure a fully installed and mechanically aligned final product. The project is located on Summer Street in Haverhill, Massachusetts, and is managed through the Purchasing Department. Interested parties must note the response deadline of November 6, 2026, for this opportunity which falls under NAICS code 238290.

1279COH01 - Purchasing Dept.

POSTED

DEADLINE

Window Installation ServicesThis subcontract for Window Installation Services involves performing specialized work for prime contractors at the Texas Department of Criminal Justice Hilltop Unit in Gatesville, Texas. The scope of work includes the removal of existing window units, preparation of openings, installation of new units, and the completion of all necessary sealing and final adjustments to deliver fully operational window systems. Due to the nature of the worksite, the contractor must strictly adhere to all correctional facility security protocols. The project is categorized under NAICS code 238290, with a response deadline set for November 11, 2026.

Texas Department of Criminal Justice

POSTED

DEADLINE

Custom Modular Equine Stall FabricatorThis subcontract agreement involves the fabrication and delivery of custom modular equine stall systems for prime contractors working on projects for the Commonwealth of Kentucky Department for Facilities and Support Services. The scope of work requires the production of stall frames using 14-gauge 2-inch square galvanized tubes with a powder-coated finish, paired with 1-inch diameter grillwork tubes spaced 3 inches on center and light gray HDPE panels. The selected fabricator is responsible for the complete manufacturing process and the delivery of all modular components directly to the designated project sites. This opportunity is categorized under NAICS code 238290 and is associated with the state of Kentucky, with a response deadline set for November 6, 2026.

Dept- Environmental Protection

POSTED

DEADLINE

DDC Control System UpdatesThis subcontract opportunity involves updating Direct Digital Control systems for prime contractors working on facility projects at SUNY Binghamton University. The scope of work includes programming control logic, installing sensors and actuators, and integrating new boilers and chillers into the existing building automation system to ensure a fully operational DDC control system. The project is categorized under NAICS code 238290 and is managed by the State University of New York. Interested parties must submit their responses by the deadline of November 12, 2026.

State University of New York (SUNY)

POSTED

DEADLINE

DDC Controls & AutomationThis subcontract for DDC Controls and Automation involves performing control system updates for prime contractors on facility projects at SUNY Binghamton University. The scope of work includes programming DDC controllers, installing sensors, and wiring controls to ensure new boilers and chillers are fully integrated into the existing building automation system. The ultimate goal is the delivery of a fully operational and integrated DDC control system. The project falls under NAICS code 238290 and requires the use of certified controls technicians to complete the installation. Interested parties should note that the response deadline is November 12, 2026, for this State University of New York initiative.

State University of New York (SUNY)

POSTED

DEADLINE

Passenger Elevator ModernizationThis subcontract for Passenger Elevator Modernization involves the complete upgrade of hydraulic passenger elevator systems for prime contractors working on Texas Government facility projects for Tom Green County. The scope of work includes the installation of pre-engineered hydraulic elevators, car enclosures, hoistway entrances, signal equipment, and 4.5 inch diameter hydraulic jacks, as well as the integration of 25 HP hydraulic pumps and electronic card swipe systems to deliver a fully certified and operational system. Qualified bidders must hold a valid Texas state license and ensure all installations comply with ASME/ANSI A17.1, ADAAG, and NFPA 80 standards. The solicitation was posted on October 20, 2026, with a response deadline of December 9, 2026. This project falls under NAICS code 238290.

POSTED

DEADLINE

RFB 27-004 Keyes Building Passenger Elevator Upgrade

Solicitation # RFB 27-004

Tom Green County is soliciting competitive sealed bids for the upgrade of the passenger elevator located in the Edd B. and Frances Frink Keyes Building at 113 West Beauregard Avenue, San Angelo, Texas. The project requires a Texas-licensed vendor to provide all labor, tools, equipment, and materials necessary to perform the upgrades as specified in the project manual and drawings. The contract will be awarded to the lowest responsible bidder, with the selection process governed by Texas Government Code Chapter 2269. Bids must be submitted in sealed envelopes by 2:00 p.m. on December 9, 2026, and must include a signed original, a copy, a submission affidavit, and a completed Form 1295. The contract includes a project contingency allowance of 20,000 dollars and requires a performance bond for bids exceeding 100,000 dollars. Compliance with the Buy American Act, prevailing wage rates, and ADA requirements for jamb pads is mandatory. The vendor must adhere to strict federal and state regulations, including the Clean Air Act and Federal Water Pollution Control Act for contracts over 150,000 dollars, as well as Equal Employment Opportunity and domestic preference standards. Payment will be processed monthly via AIA G702 and G703 forms. Because the building remains occupied during construction, the contractor must implement comprehensive safety precautions and coordinate with the owner to minimize operational disruptions.

POSTED

DEADLINE

Seismic Safety UpgradesThe Seismic Safety Upgrades subcontract involves performing critical structural reinforcements for property owners who lease space to the California Department of General Services. The scope of work includes conducting detailed structural analyses and installing essential safety measures such as seismic braces, wall anchoring, and foundation reinforcement. All work must be executed using steel bracing and epoxy anchors in strict accordance with the California Building Code and State of California seismic safety specifications to ensure certified compliance. This opportunity is categorized under NAICS code 238290 and is managed by the state of California. Interested parties should note that the solicitation was posted on October 20, 2026, with a response deadline set for November 4, 2026. Further details and submission guidelines can be accessed through the Cal eProcure portal.

California Department of General Services

POSTED

DEADLINE

Material Lift Elevator Installation and IntegrationThis subcontract for the New Orleans Regional Transit Authority involves the installation and integration of material lift elevators. The selected contractor will be responsible for removing existing equipment and installing a new system with a 4,000 lb capacity, followed by comprehensive operational and final acceptance testing. The final deliverable is a fully operational material lift elevator accompanied by complete as-built documentation. To be eligible, contractors must possess a valid Louisiana Contractor’s License and provide a Buy America Certificate of Compliance. The project falls under NAICS code 238290, with a response deadline set for November 12, 2026.

New Orleans Regional Transit Authority

POSTED

1 day ago

DEADLINE

in 22 days

AI Contract Overview

Parks Canada is seeking an experienced contractor for the supply and installation of a helipad fueling system at the Jasper National Park compound in Alberta. The project is estimated to be valued between 1,000,001 and 5,000,000 dollars, excluding taxes, and all work must be completed by March 31, 2023. All activities must comply with the National Park Act and associated regulations. Bids must be submitted via a two-submission procedure and are only accepted through a specific email address or fax; submissions via SAP Ariba, courier, or in-person will not be accepted. The response deadline is February 7, 2023. Interested parties are encouraged to obtain official documents through the Government Electronic Tendering Service and must adhere to strict email file size limits when submitting their proposals.

General Info

Parks Canada seeks helipad fueling system installation in Jasper, Alberta by March 31, 2023.

Agency

Government of Canada → Parks Canada

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

*Alberta, CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 3

Solicitation

Response DeadlineFeb 7

Deadline has passed

Submission Closed

02/07/2023, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Parks Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Parks Canada

Office AddressN/A

Contacts

Maan AarondeepPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

5P468-22-0242/A Fuel Tank for Emergency Services Helipad – Jasper National ParkBIDS RECEIVED BY FAX AND EMAIL WILL BE ACCEPTED AS OFFICIAL. Parks Canada is not currently accepting bids via SAP Ariba, you must submit your bid VIA FAX OR EMAIL AS INDICATED IN THE SOLICITATION DOCUMENT.BIDS RECEIVED IN-PERSON OR BY COURIER WILL NOT BE ACCEPTED. The only acceptable email address for responses to the bid solicitation is soumissionsami-bidsrpc@pc.gc.ca). Bids submitted by email directly to the Contracting Authority or to any email address other than soumissionsami-bidsrpc@pc.gc.ca will not be accepted.The only acceptable facsimile for responses to bid solicitations is 1-855-983-1808.The maximum email file size that Parks Canada is capable of receiving is 15 megabytes. The Bidder is responsible for any failure attributable to the transmission or receipt of the emailed bid due to file size.The Bidder should be cognisant of the size of the email as a whole, and not only the attachments. Please take into consideration that some attachments, when sent, may be resized during the email transfer. If the email size is too large, the Bidder should send the bid in multiple emails properly labeled with the solicitation number, project name, and indicate how many emails are included (ex. 1 of 2).Emails with links to bid documents will not be accepted. Bid documents must be sent as email attachments.REQUIREMENTParks Canada Agency (PCA) is seeking an experienced contractor to supply and install a helipad fueling system to service the helipad at the Jasper National Park compound.See specifications and drawings for further details on the requirement of this project.To assist with bonding and insurance requirements, this project is estimated at a value between $1,000,001 > $5,000,000, Taxes extra.TWO-SUBMISSION BIDThis Bid shall be submitted following a “two-submission” procedure. Refer to SI04 of the Special Instructions to Bidders.PERIOD OF CONTRACT / DELIVERY DATEContractor shall perform and complete the Work no later than March 31, 2023.BIDDERS’ CONFERENCEThere will be an optional bidders conference on January 26, 2023 at 1:00pm (MST-HNR). Interested bidders are to call in on the specified date using the coordinates provided.Bidders are requested to communicate with the Contracting Authority before bidders conference to confirm attendance and provide the name(s) of the person(s) who will attend. Any clarifications or changes to the bid solicitation resulting from the optional bidders conference will be included as an amendment to the bid solicitation.ENQUIRIESAll enquiries of a technical and contractual nature are to be submitted to the Contracting Authority.Enquiries regarding this solicitation must be submitted in writing and should be received no later than 5 business days prior to the date set for solicitation closing to allow sufficient time to provide a response. Enquiries received after that time may result in an answer NOT being provided.INFORMATIONNational Parks Regulations require that all work is to be performed in accordance with the ordinances, laws, rules and regulations set out in the National Park Act.Bidders that consider themselves qualified to provide this Work and intend to submit bids on this project should obtain documents from the Government Electronic Tendering Service through the Government of Canada tendering service at www.canadabuys.canada.ca/en/tender-opportunities. Addenda, when issued, will be available from the Government of Canada tendering service. Bidders that elect to base their bids on documents obtained from other sources do so at their own risk. Late submissions will not be considered.The Crown retains the right to negotiate with suppliers on any procurement.Documents may be submitted in either official language of Canada. Parks Canada has made every effort to provide equivalent documents in both official languages, however, if you find any discrepancies between the English and French documents, please notify the contract officer listed in this opportunity as soon as possible so that we can rectify the situation.