This Subcontract opportunity from Department Of Defense was posted on August 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Full Assembly and Integration of Turf Batwing Finish Mower

Closed

Federal

Submission Closed09/04/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333111

New

International

Supply of Mechanical Road Sweepers

East Staffordshire Borough Council

POSTED

DEADLINE

Supply of Two (2) complete 14 HP hand tractor/power tiller kits to IOM Uganda Procurement Procurement - [email hidden], Tel: +256 0772709633

Solicitation # Hand Tractor/11/26

The International Organization for Migration (IOM) is soliciting quotations for the supply of two complete 14 HP hand tractor/power tiller kits to be delivered in Uganda. Each kit must feature a four-stroke, single-cylinder diesel engine of approximately 770 cc with a minimum 14 HP output at 2,400 RPM, a water-cooled radiator, and a transmission consisting of at least three forward gears and one reverse gear. Each kit must include a comprehensive set of compatible accessories, including pneumatic tyres, cage wheels, a mouldboard plough, disc plough, rake/leveller, and a puddler, as well as an L-type offset hitch. Additionally, each kit must include a single-axle agricultural trailer with a minimum load capacity of 500 kg, a reinforced steel floor, and foldable sides. The contract will be awarded to the lowest price technically compliant offer. Bidders must submit their quotations via email to [email hidden] by November 19, 2026, at 5:00 pm EAT. Proposals must include the unit and total cost, delivery lead time, warranty details, and information regarding after-sales service, spare parts availability, and any provided operator training. Payment is set at 100% within 30 days following the receipt of goods and submission of documentation. Vendors must provide a signed Declaration of Conformity, certifying their legal and ethical standing, financial soundness, and compliance with UN Sanctions List requirements.

POSTED

DEADLINE

2026/FLGUA/FLGUA/138989 Adquisición de 4,200 comederos con capacidad de 11 Kg c/u y 4,200 bebederos con capacidad de 14 litros de agua c/u [email hidden]

Solicitation # 2026/FLGUA/FLGUA/138989

The Food and Agriculture Organization of the United Nations (FAO) is soliciting technical and economic proposals for the acquisition of 4,200 feeders with a capacity of 11 kg each and 4,200 waterers with a capacity of 14 liters each. This procurement is being conducted in Guatemala under the framework of project UNJP/GUA/037/UNJ. Interested organizations must submit their proposals through the FAO e-tendering system via the UNGM portal, providing separate technical and financial offers. All communications and requests for clarification must be handled through the correspondence tab of the portal. Bidders are required to certify that all mandatory documentation has been provided and that no material facts have been misrepresented. To ensure a valid submission, files should not exceed 5MB and must not contain special characters in the filenames.

POSTED

DEADLINE

Turf Groomer SupplyThis subcontract, titled Turf Groomer Supply, is issued by the Connecticut DAS Procurement agency for the procurement and delivery of specialized turf grooming machinery. The equipment is intended for use by prime contractors working on municipal projects within the Town of Cheshire. The solicitation was posted on November 10, 2026, with a response deadline of December 1, 2026. The contract falls under NAICS code 333111 and is managed through the CTSource Bid Board.

POSTED

DEADLINE

Small Bundle Thresher and Components SupplierThis subcontract involves the supply of a small bundle thresher system and associated components for prime contractors working on USDA Forest Service seed lab projects. The required equipment includes the Base Model SSBTGE, a 110 volt 60 hz motor, and three types of concaves: metal raspbars, round spiked, and rubber coated metal raspbars. All provided supplies must strictly comply with the Buy American-Supplies regulations under FAR 52.225-1. Managed by the Department of Agriculture through Csa East 2 Usda-Fs, the contract falls under NAICS code 333111. The place of performance is located in Dry Branch. Interested parties must adhere to the response deadline of November 19, 2026, to provide the complete thresher unit and its specified components.

POSTED

DEADLINE

New High-Horsepower Agricultural Tractor SupplyThis subcontract opportunity, issued by the Department of Defense for W6QM Micc-Ft Drum, seeks the supply of one new high-horsepower agricultural tractor for prime contractors. The required unit must feature a 6.8L six-cylinder turbocharger engine producing between 180hp and 195hp, a PowerQuad Plus transmission, and a Category 3 3-point hitch. Technical specifications include a G5 Command Center display, StarFire receiver, and integrated telematics to ensure full operational capability. The contract is designated as a total Small Business Set Aside under NAICS code 333111. Bidders must comply with Buy American preferences and provide official certification regarding the country of origin. The response deadline for this procurement is November 25, 2026, with the final deliverable being one fully configured tractor delivered to the specified place of performance.

POSTED

DEADLINE

37--DK Boom Spray Rig for Flat-Bed Truck

Solicitation # 140RR027Q0005

The Bureau of Reclamation Missouri Basin Regional Office is soliciting quotes for the supply and installation of a skid-mounted boom spray rig tender system for the North Dakota Field Office in Elgin, ND. This Firm Fixed Price contract is a Total Small Business Set-aside under NAICS code 333111. The project requires the removal and disposal of an existing 31-year-old system from a Government-Furnished Property 2011 Dodge Ram 3500 flatbed truck and the installation of a new herbicide-resistant system. Key technical requirements include a 300-gallon tank, a pump and engine, an electric rewind hose reel, and a 45-foot 3-point folding boom sprayer with drip-free nozzles. The final installed system must fit within a 14 by 12 foot storage building. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. While initial fabrication and installation may occur at a facility outside the 300-mile radius of Elgin, North Dakota, provided the contractor manages all transportation of the government vehicle, all follow-on support, servicing, and maintenance must be performed within that 300-mile radius. Proposals are due by November 13, 2026, at 1500 MST. Payment will be processed electronically through the Invoice Processing Platform (IPP). Offerors must be registered in the System for Award Management (SAM) and provide completed representations and certifications per FAR 52.212-3.

Great Plains Regional Office

POSTED

DEADLINE

Solicitation # W911S227U0157

Solicitation W911S227U0157 is a Request for Quotation for a new tractor issued by the W6QM Micc-Ft Drum for the Department of Defense. This acquisition is a Total Small Business Set-Aside and requires the delivery of new equipment, as used or remanufactured products are prohibited. The tractor must feature a 6.8L six-cylinder turbocharger engine with rated power of 180hp and maximum power of 195hp, a PowerQuad Plus transmission with 20 forward and reverse speeds, and a maximum transport speed of 40 km/h. Key physical specifications include a 2,800 mm wheelbase, mechanical front-wheel drive, and a configuration of single front wheels paired with dual rear wheels. The unit must be equipped with a pressure-and flow-compensated closed-loop hydraulic system, a Category 3 3-point hitch, and an enclosed cab with mechanical suspension and a G5 Command Center display. The contract is awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Offerors must submit quotes via the PIEE Solicitation module and include descriptive literature and a completed country of origin certification to avoid being rejected as nonresponsive. Delivery is preferred within 30 days on an F.O.B. destination basis. The procurement is governed by FAR subpart 12.6 for commercial products and includes strict compliance with Buy American preferences, cybersecurity safeguarding for covered defense information, and various labor and employment eligibility regulations.

POSTED

DEADLINE

Supplier of Agricultural Cleaning and Sorting MachinesThis subcontract involves the supply of industrial-grade agricultural cleaning and sorting machinery to support prime contractors working on UNICEF SME projects in Burundi. The required equipment must feature a processing capacity between 500 and 1,000 kg per hour and operate on 0.5 kW of electrical power. To ensure safety and durability, all machinery must include motor protection against overcurrent and adhere to industrial electrical safety standards regarding proper grounding. The primary objective is the delivery of fully operational machinery, with a preference for suppliers holding ISO 9000 certification. This procurement falls under NAICS code 333111 and is specifically designated for performance within Burundi to enhance local agricultural processing capabilities.

POSTED

DEADLINE

01586-260076 - Livestock Squeeze [01586-260076 - Compression du bétail]

Solicitation # Doc5958847635

Agriculture and Agri-Food Canada is seeking offers for the supply, delivery, installation, and commissioning of one hydraulic cattle squeeze chute and its associated components. The equipment is to be installed at the Livestock Research Feedlot Building 125 in Lethbridge, Alberta. This solicitation is subject to the Policy on Reciprocal Procurement, meaning only Canadian suppliers are eligible, and bidders must complete a Canadian Content certification to avoid having their goods classified as non-Canadian. Interested parties must be fully registered in CanadaBuys and SAP Ariba, with all submissions and inquiries handled exclusively through the SAP Business Network event messages tab. Late submissions will not be accepted. Additionally, the government encourages the use of environmentally preferable packaging in alignment with the Greening Government Strategy. The deadline for responses is December 3, 2026.

Government of Canada / Gouvernement du Canada

POSTED

DEADLINE

MoDOT Statewide Commercial Rotary Cutters

Solicitation # MODOT 0000000448SL

The Missouri Department of Transportation (MoDOT) and Missouri Highways and Transportation (MHTC) are seeking bids for a Blanket Purchase Agreement to provide Commercial Rotary Cutters on an as-needed basis. The contract features an initial two-year term with three optional one-year renewal periods. The primary requirement is for a three-section, flexible 15-foot rotary cutter with a cutting width between 13.5 and 15 feet, a minimum cut capacity of 3.5-inch diameter material, and a cutting height range of 4 to 12 inches. All equipment must include a minimum five-year gearbox warranty and essential safety features, including a Slow-Moving Vehicle emblem and double-row 5/16 inch safety chains. Bids must be submitted by November 19, 2026, primarily through the MissouriBUYS portal, though hard copies via USPS, UPS, or FEDEX are permitted if the buyer is notified five days in advance. Email submissions are prohibited. Award decisions will be based on the lowest and best bid, evaluating responsiveness, vendor reliability over the past three years, and price. A 10 percent price preference is applied to eligible domestic products under the Buy American Act. Required documentation includes Antidiscrimination and Buy American certifications, and pricing must be provided for the cutters as well as percentage discounts off MSRP for factory-installed options, catalog units, and replacement parts. All deliveries are required to be FOB destination, freight prepaid.

POSTED

DEADLINE

Agricultural Tractors

Solicitation # W8476-26M864/B

The Department of National Defence is issuing a reissue of solicitation W8476-26M864/B for the procurement of five agricultural tractors and related items. This request supersedes a previous solicitation and specifies configurations B, C, and E under Supply Arrangement E60HS-18AGTR. The equipment is destined for delivery to Canadian Forces Base Borden and Canadian Forces Base Halifax, with a required delivery timeline of 180 days following the contract award. Participation in this bidding process is strictly limited to suppliers who hold a pre-qualified Supply Arrangement under RFSA E60HS-18AGTR/A. Interested offerors must submit their proposals via email to the designated receiving address by the deadline of November 24, 2026. Submissions are accepted in either of Canada's official languages, and the Crown maintains the right to negotiate with suppliers throughout the procurement process.

Department of National Defence

POSTED

3 days ago

DEADLINE

in 12 days

AI Contract Overview

This subcontract with the Department of Defense, specifically the Aftc Pzio agency, requires the complete manufacturing, integration, and delivery of the Woods TBW 12.40 Turf Batwing Finish Mower. The scope of work includes the production of mower decks, gearboxes, hydraulics, and all necessary safety components, ensuring full compliance with ASABE and ANSI standards. The project falls under NAICS code 333111 and is to be performed in the 32542 zip code area. Interested parties must submit their responses by September 4, 2026, following the posting date of August 20, 2026.

General Info

DoD subcontract for manufacturing and delivering Woods TBW 12.40 Turf Batwing Finish Mowers.

Agency

Department Of Defense → FA2823 Aftc Pzio

NAICS

333111 - Farm Machinery and Equipment Manufacturing

Place of Performance

FL, 32542

Set-Aside

NONE

Documents

This scope was carved out of FA282326Q0080.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Woods TBW 12.40 Turf Batwing Finish Mower or Equal

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 20

subcontract

Response DeadlineSep 4

Deadline has passed

Submission Closed

09/04/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA2823 Aftc Pzio

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA2823 Aftc Pzio

Office AddressN/A

ContactsNo contact information available

Full Description

Complete manufacturing, integration, and delivery of the Woods TBW 12.40 Turf Batwing Finish Mower, including decks, gearboxes, hydraulics, and safety components, compliant with ASABE and ANSI standards.