Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FURNACE, DENTAL LABO

Active
SPE2DH-26-T-5167Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single electric press furnace designed for dental laboratory use, identified by NSN 6520-01-645-5701, with a required delivery within 81 days of award. The equipment features intelligent press functionality combining an electronic press drive with a quartz tube Kanthal heating muffle, a liquid crystal graphics display with backlighting, an optical status display, a crack detection system, and automatic double-range temperature calibration, capable of reaching a maximum firing temperature of 1200 degrees Celsius. Physical dimensions are 19.48 inches deep by 15.55 inches wide by 21.65 inches high, weighing 45.1 pounds. The item is subject to Item Unique Identification (IUID) compliance per MIL-STD-130 and the DFARS 252.211-7003 clause, requiring unique markings and tracking in accordance with federal standards. Packaging must adhere to the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with each unit sealed in a container that ensures protection from damage during transit, packed in suitable commercial shipping containers for safe, low-cost delivery to APO 96260-5479. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling compliance. The procurement is under solicitation SPE2DH-26-T-5167, issued by the Department of Defense’s Medical Supply Chain FSH, with bids required to specify the supplier and part number, and covered defense information may apply.

General Info

Electric press furnace for dental use, 1200°C, IUID compliant, delivery in 81 days to APO 96260-5479.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

UNIT 15479, APO, AP, 96260-5479, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5167.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FURNACE,DENTAL LABO
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FURNACE,DENTAL LABORATORY,ELECTRIC
PRESS FURNACE,DENTAL;INTELLIGENT
PRESS FUNCTION;COMBINES ELECTRONIC
PRESS DRIVE WITH QUARTZ TUBE KANTHAL
HEATING MUFFLE TECHNOLOGY;LIQUID
CRYSTAL GRAPHICS DISPLAY WITH BACKGROUND
LIGHTING;OPTICAL STATUS DISPLAY;
CRACK DETECTION SYSTEM;AUTOMATIC DOUBLE
RANGE TEMPERATURE CALIBRATION;MAX
FIRING TEMPERATURE:1200 DEG C;CLOSED
FURNACE DIMENSIONS:19.48 IN D X 15.55 IN W
X 21.65 IN H;WEIGHT: 45.1 LB.
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT:
SPE2DH-26-T-5167
SECTION B
https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE: EACH (EA)
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-645-5701 Quantity: 1 EA Purchase Request: 7017486112QTY: 1 Delivery: 81 days ADO

Similar Contracts

NAICS: 339114
New
DIBBS
ABUTMENT, DENTAL IMPThe contract specifies the procurement of three dental implant healing abutments, specifically the Branemark system with a 6x3mm working diameter, identified by NSN 6520-01-518-1328. Each unit must be individually sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe delivery via common carrier at the lowest cost to the designated delivery point, APO 09853. All items must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and sourcing details including the manufacturer and part number must be clearly indicated by the bidder. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract further incorporates DLA packaging standards and mandates the removal of government identification from non-accepted supplies. The solicitation is issued under SPE2DH-26-T-5175, with a response deadline of July 21, 2026, and delivery required within 20 days of award. The acquiring agency is the Department of Defense, Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
BOOTS, FIREMEN'SHoneywell PRO-Warrington Model 5001B firefighter boots are high-performance, Berry-compliant, union-made protective footwear designed for structural firefighting, proximity firefighting, and hazardous material emergencies. These 14-inch pull-on bunker boots feature a full-grain waterproof cowhide leather outer shell with reinforced flex joints, a textile composite puncture-resistant bottom plate, a steel safety toe rated to ASTM F2413-11 Class 75 impact and compression standards, and a corrosion-resistant steel shank for arch support. The boot incorporates a multi-layered protective system including a Kevlar layer with aluminized PBI fabric for radiant heat reflection, a Crosstech® moisture barrier bootie with Omaha lining for waterproofing and breathability, and a removable orthopedic polyurethane insole for long-term comfort. The Vibram® Fire/Ice outsole provides superior traction on wet, icy, and hot surfaces, while PowerToe and Heel Kicker rubber compounds enhance durability and ease of removal. A thermoplastic heel lock counter with foam ensures proper fit and reduces lower back strain, and Nomex® pull loops facilitate easy donning and doffing while maintaining compatibility with turnout pants. The boots meet or exceed NFPA 1971 and NFPA 1990 standards and include required certification labels, barcoding with unique serial numbers, and a user guide. Each pair is packaged and labeled per MIL-STD-129 and MIL-STD-2073-1E, with deliveries required within 20 days to FPO AE 09576 under a U.S. Department of Defense procurement contract.
C AND T SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339114
New
DIBBS
SEALING MACHINEThe contract is for a single portable sealing machine operating at 120V 60Hz, identified by NSN 3540-01-507-5630 and part number HEA28265 from WEBER SCIENTIFIC INC, with a required delivery within five days to FPO AP 96678-1704 aboard the USS SAN DIEGO LPD 22. The item is classified as a medical device regulated by the FDA under Class I, requiring compliance with registration, listing, labeling, and GMP standards even though a 510(k) is not mandatory. It must be marked in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must carry Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003. Packaging must use commercial-grade sealed unit containers and exterior shipping containers ensuring safe transport at the lowest possible freight rate, with palletization following DLA packaging requirements. The device contains a fluorescent lamp with mercury, which must be shockproof and enclosed in a secondary containment barrier as defined by NAVSEA 5100-003D; mercury must not contact any hardware except as specifically permitted. All material must comply with DLA’s technical and quality requirements referenced via RP001 and RA001, and no government identification may be removed from non-accepted supplies. The contract specifies a firm fixed price of $1.00 with zero variance in quantity, destination delivery terms (FOB), and inspection and acceptance occurring at the delivery point.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAMThe contract is for the procurement of 15 sheets of non-latex rubber dam measuring 6 by 6 inches, in regular medium thickness and teal green color, under the NSN 6520-01-717-7806. The unit of issue is a package containing 15 sheets, with a total quantity of one package ordered for delivery within 20 days after order placement. The solicitation number is SPE2DH-26-T-5161, posted on July 14, 2026, with a response deadline of July 21, 2026. The procurement falls under NAICS code 339114 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance required at Hampton, Virginia, 23665-2040. Bidders must clearly specify the source and part number being supplied. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and adheres to DLA packaging standards, requires removal of government identification from non-accepted supplies, and may involve covered defense information. The primary point of contact is Tina Vu, reachable via email or phone provided in the contract data.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
Federal
Laboratory Fabrication Prosthetic Dental Appliances (Base plus 4 option years)
Phoenix Area Indian Health Svc

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details