Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Furniture and Appliance Installation Services

Active

Federal

Response Deadline08/24/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the on-site assembly, installation, and commissioning of furniture, appliances, and recreational equipment, with required verification of electrical and plumbing systems to ensure proper functionality and safety. Comprehensive post-installation cleaning is also included as part of the service scope to deliver a fully operational and tidy environment upon completion. All work must be performed at the specified place of performance in Teverola, 81030, and the solicitation is classified as a subcontract under NAICS code 238990 for other building completion services. The contract was posted on July 23, 2026, with a response deadline of August 24, 2026, at 7:00 PM. It is issued by the Department of Defense through the W2V6 USA Engineering Support Center Huntsville and does not specify a set-aside type or point of contact. Interested parties must submit proposals before the deadline to be considered for award, and all services must comply with the technical requirements and performance standards outlined in the solicitation.

General Info

On-site assembly, installation, and commissioning of furniture and equipment in Teverola by August 24, 2026.

Agency

Department Of Defense → W2V6 USA Engineering Spt Ctr HuntsvilView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Teverola , IT-CE, 81030, ITA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 07:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W2V6 USA Engineering Spt Ctr Huntsvil

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W2V6 USA Engineering Spt Ctr Huntsvil

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site assembly, installation, and commissioning of furniture, appliances, and recreational equipment, including electrical/plumbing verification and post-installation cleaning.

Similar Contracts

Same NAICS industry code

City of Williams – Wastewater Collection System Improvement Project (Job No. 2290.16)

Solicitation # 2290.16

The City of Williams is seeking qualified contractors for the Wastewater Collection System Improvement Project, identified as Job No. 2290.16, with an estimated contract value of $4.1 million. The scope of work includes replacing up to 10,500 linear feet of 8-inch to 24-inch collection pipeline, replacing laterals and installing new two-way cleanouts within the right-of-way, replacing manholes, and lining approximately 320 linear feet of a 15-inch collection pipeline. The project requires the supply of materials such as aggregate and asphalt, precast concrete manholes, ready-mix concrete, waterworks pipe and fittings, and the provision of services including sawcutting, shoring rental, SWPPP services, striping, traffic control, and trucking. All subcontractors must comply with applicable state, county, and federal regulations as detailed in the project specifications. The solicitation is restricted to small businesses and emphasizes participation by certified DBE and SBE firms, encouraging second-tier subcontracting and procurement from certified small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. Bid submissions are due by August 8, 2026, at 2:00 PM, with plans and specifications available through an online portal or by email to Ranger Pipelines, Inc., the contracting entity. Bonding, insurance, and line of credit requirements will be provided directly by Ranger Pipelines, Inc., and the place of performance is located in California. The solicitation is issued as a Request for Quotes with no specified contract type or line-item pricing, leaving pricing and detailed terms to be determined by respondent proposals.

Ranger Pipelines Incorporated

POSTED

about 9 hours ago

DEADLINE

Crack Sealing Application ServicesThe contract entails performing crack sealing services on Interstate 10 within El Paso County, requiring thorough cleaning of pavement cracks followed by the application of hot-applied rubberized sealant in full compliance with Texas Department of Transportation specifications. The work is intended to preserve pavement integrity and extend road life by preventing water infiltration and further deterioration through precise, specification-driven sealant application techniques. All activities must adhere to TxDOT standards for material quality, application methods, and operational safety protocols. This is a subcontract opportunity under NAICS code 238990, with a response deadline of September 2, 2026, and was posted on August 5, 2026. The contracting authority is the Texas Department of Transportation, and performance is limited to IH-10 in El Paso County. Interested parties must submit proposals through the Texas SmartBuy portal by the specified deadline, and the work is structured as a subcontract rather than a direct award, indicating it is part of a larger project managed by a prime contractor. There is no set-aside provision specified, meaning all eligible subcontractors may compete regardless of size or business classification.

Texas Department of Transportation

POSTED

about 9 hours ago

DEADLINE

Sign Installation and Structural Steel WorkThe contract encompasses the on-site removal of existing signage and the installation of new signs mounted on breakaway posts, gantries, or cantilever arms, with full responsibility for bolting, precise alignment, and proper grounding to ensure compliance with safety and structural standards. All work must be performed in accordance with industry best practices and transportation safety regulations, requiring skilled labor and specialized equipment to handle elevated installations and demolition tasks safely and efficiently. The contract is classified as a subcontract under NAICS code 238990 and is issued by the Texas Department of Transportation, with responses due by September 3, 2026. The place of performance is within Texas, though specific locations are not detailed, indicating the work may span multiple sites across the state. Bidders must be prepared to mobilize onsite, manage logistics for sign removal and installation in active roadway environments, and adhere to all state and federal requirements for public infrastructure projects. The solicitation is accessible via the Texas SmartBuy portal for qualified subcontractors.

Texas Department of Transportation

POSTED

about 9 hours ago

DEADLINE

Exterior Door Installation and Labor ServicesComplete installation of exterior doors is required, encompassing the removal of existing doors, proper framing adjustments, weatherproofing to ensure resistance to environmental elements, installation of all necessary hardware, and a final inspection to confirm compliance with contract specifications. The work must adhere strictly to all documented requirements and standards outlined in the contract documents, ensuring durability, functionality, and safety. This subcontract under NAICS code 238990 is issued by BOE Maintenance in Connecticut with a response deadline of September 1, 2026, and is open for bidding through the specified procurement portal.

BOE Maintenance

POSTED

about 9 hours ago

DEADLINE

Non-Electric Traffic Control Signage DeploymentThe City of San Antonio is seeking a subcontractor to install, maintain, and manage non-electric traffic control infrastructure including signage, rumble strips, and temporary control devices. This procurement falls under NAICS code 238990, covering other specialized construction activities, and is intended for work to be performed within the city’s jurisdiction. The contract opportunity was posted on August 5, 2026, with a firm response deadline of September 4, 2026, at 8:00 PM. All performance will take place in San Antonio, Texas, focusing on enhancing road safety through physical traffic control measures that do not require electrical power. The project requires expertise in durable material installation, adherence to traffic control standards, and ongoing maintenance to ensure visibility and functionality under varying environmental conditions. Subcontractors must be prepared to coordinate with local authorities and comply with all applicable safety and regulatory requirements during deployment and maintenance activities.

CITY OF SAN ANTONIO

POSTED

about 9 hours ago

DEADLINE

Raised Pavement Marker (RPM) InstallationThe contract is for the supply and installation of raised pavement markers including Botts' dots and reflective domes to clearly delineate lanes on roadways within the City of San Antonio. It is classified as a subcontract under NAICS code 238990 and is open for bids with a response deadline of September 4, 2026. The work will be performed locally in Texas, with no specific city or zip code designated for performance. The posting date shows the opportunity became publicly available on August 5, 2026, and interested parties must submit proposals before the deadline to be considered. The contract is administered through the Texas SmartBuy platform, and all details and submissions are handled via the provided online portal. There is no set-aside designation, meaning all eligible contractors may compete regardless of business size or ownership characteristics.

CITY OF SAN ANTONIO

POSTED

about 9 hours ago

DEADLINE

Pavement Marking Installation and MaintenanceThe contract titled Pavement Marking Installation and Maintenance involves the removal and installation of reflective pavement markings on city roadways within San Antonio, including stripes, legends, and crosswalks. The work is being procured as a subcontract under the NAICS code 238990, with a response deadline of September 4, 2026, and was posted on August 5, 2026. All tasks must align with local standards for visibility, durability, and safety, ensuring that markings meet or exceed regulatory requirements for nighttime and weather-condition readability. The project is administered by the City of San Antonio, Texas, and performance is expected to occur across various city roadways, though specific locations are not detailed. The subcontractor is responsible for all materials, labor, equipment, and compliance with traffic control protocols during execution. No set-aside provisions have been designated, and the contract does not specify a point of contact, with the official solicitation details accessible through the provided Texas SmartBuy portal link.

CITY OF SAN ANTONIO

POSTED

about 9 hours ago

DEADLINE

T32-D7-Fencing-I20 EB/WB-Rockdale-190813

Solicitation # 48400-eRFQ-001899-2027

The Georgia Department of Transportation is soliciting bids for the installation, repair, and maintenance of fencing associated with state highway infrastructure, limited to contractors previously qualified through the department’s prequalification process for this specific service. Eligibility is restricted to those who have successfully completed the required prequalification as mandated under Georgia law, ensuring only experienced and vetted contractors may respond. The solicitation is governed by the terms of MMSA 48400-410-000033618 and the official ITB/RFQ form, and all respondents must fully adhere to the instructions provided, as failure to comply may result in bid rejection. The Department retains full discretion to modify contract terms, add new provisions, or waive minor irregularities at any point during the procurement process. The solicitation, identified as T32-D7-Fencing-I20 EB/WB-Rockdale-190813 under reference number 48400-eRFQ-001899-2027, was posted on August 5, 2026, with a response deadline of September 1, 2026. Work will be performed in Rockdale County, Georgia, and all contractual obligations must be fulfilled in accordance with state statutes authorizing ancillary services for public road construction and maintenance. Primary point of contact for inquiries is Timothy Swink, reachable by phone or email, and all submissions must be made through the official Georgia procurement portal. Bidders are strongly advised to review the complete solicitation materials prior to submission, as the State Entity reserves the right to reject any or all bids without explanation.

Department of Transportation

POSTED

about 11 hours ago

DEADLINE

Repoint Mortar at Fort Sumter

Solicitation # DOIDFBO260078

The National Park Service’s Historic Preservation Training Center is seeking a qualified small business contractor to perform repointing work at Fort Sumter by designing, erecting, assembling, and installing scaffolding on the exterior right face wall, which measures 100 feet in length and 25 feet in height. The project requires full provision of labor, materials, and equipment necessary to safely support the repointing operation, with all work performed in accordance with historic preservation standards. The solicitation, issued under DOIDFBO260078, is a Small Business Set Aside, ensuring eligibility is restricted to businesses certified as small by the SBA, and is categorized under NAICS code 238990 for other construction specialties. The opportunity was posted on August 5, 2026, with responses due by August 19, 2026, at 9:00 PM Eastern Time. The contracting office is based in Herndon, Virginia, under the Department of the Interior’s IBC Acquisition Services Directorate, and inquiries should be directed to Angelina Clements, the primary point of contact, via phone or email provided in the solicitation.

Ibc Acq Svcs Directorate (00004)

POSTED

about 13 hours ago

DEADLINE

Chain-link Fence Purchase and Installation

Solicitation # 69727626Q000003

The contract is for the purchase and installation of a chain-link fence at the Division of Gulf Operations, specifically covering the Warehouse Loading Dock and Parking Area at Poland Street Wharf, Berth 3, Door 38, New Orleans, Louisiana, 70146. This procurement is issued under solicitation number 69727626Q000003 and is classified as a combined solicitation with a Small Business Set Aside—Total designation, meaning only small business concerns are eligible to compete. The North American Industry Classification System code is 238990, which corresponds to other specialty trade contractors. The awarding agency is the Department of Transportation’s Maritime Administration, with the office located in New Orleans, Louisiana, 70130, and the work must be performed at the specified site in New Orleans, 70146. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 21, 2026, at 3:00 PM Eastern Time. Primary point of contact for inquiries is Carolyn Quinn, reachable via email at carolyn.quinn@dot.gov. All proposals must be submitted through the official SAM.gov portal linked in the solicitation.

697276 DOT Maritime Administration

POSTED

about 13 hours ago

DEADLINE

Y--Sources Sought Notice for Scaffolding for Chalmette Monument

Solicitation # DOIDFBO260079

The Department of the Interior, through the Interior Business Center’s Acquisition Services Directorate, is conducting market research via a sources-sought notice for a scaffolding system to support conservation work at the Chalmette Monument in New Orleans, Louisiana. The goal is to identify qualified small business vendors capable of designing, erecting, maintaining, and dismantling a full-enclosure, non-invasive scaffold system around the 100-foot stone obelisk without attaching to or drilling into the historic structure. The project requires a scaffold with five staging platforms (rated for 1,000 lbs each), five water tank platforms (rated for 3,000 lbs each), a hoisting bay with a 1-ton electric hoist, debris netting, overhead protection rated for 150 PSF, and OSHA-compliant integrated stairs. All work must be completed within a fixed three-month rental period, with mobilization and demobilization occurring outside of that window, and the site must be closed to the public during active operations. The contract is anticipated to be awarded as a Firm-Fixed-Price arrangement under NAICS code 238990, which carries a small business size standard of $19 million in annual revenue, and the procurement is restricted to small business sources. Respondents must submit a single Microsoft Word document, no longer than ten pages using 11-point Times New Roman font, via email to sarah_ignacio@ibc.doi.gov by August 14, 2026, with the subject line “Scaffolding System for Chalmette Monument.” Proposals must include a cover sheet with the vendor’s Unique Entity ID and CAGE code, along with Section 1 detailing past performance on at least one similar historic preservation project within the last three years, including contract numbers, locations, values, and points of contact. Section 2, offering comments on the draft scope of work, is optional. The contractor must designate a competent person certified under OSHA 29 CFR 1926 Subpart L to inspect and certify the scaffold prior to use and before each shift, submitting a written report to the National Park Service’s Contracting Officer’s Representative for formal acceptance. There is no publicly disclosed evaluation methodology, award basis, or pricing structure, as this is a pre-solicitation market research tool. Performance will occur at the Chalmette Battlefield Park, with administrative oversight handled remotely from Herndon, Virginia. No packaging,

Ibc Acq Svcs Directorate (00004)

POSTED

about 13 hours ago

DEADLINE

Emergency and On-Call Maintenance SupportThe contract titled Emergency and On-Call Maintenance Support requires prompt response to urgent plumbing leaks, electrical failures, and safety hazards, with a 24-hour response window for standard issues and a stricter 2-hour threshold for safety-critical situations. Contractors are expected to either perform minor repairs directly or arrange for specialized trade professionals to address more complex problems, ensuring continuous operational safety and functionality. All work must align with the needs of the Department of Transportation in North Carolina, with performance obligations rooted in maintaining critical infrastructure without delay. This subcontract, identified under NAICS code 238990, was posted on August 5, 2026, and requires proposals to be submitted no later than August 26, 2026, at 7:00 PM. The scope is focused on emergency maintenance support without specific geographic details provided beyond the state level, and while no set-aside provisions are designated, the opportunity is open to qualified subcontractors ready to meet rigorous response timelines and reliability standards for public infrastructure systems.

Department of Transportation

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → W2V6 USA Engineering Spt Ctr Huntsvil

Same awarding agency

FY26 National Defense University (NDU) BLDG 61 and 62 Classroom Renovation, Fort McNair, Washington, DC

Solicitation # W912DY26RA120

The contract solicitation W912DY26RA120 pertains to the renovation of classrooms in Buildings 61 and 62 at the National Defense University on Fort McNair in Washington, DC, with a total set-aside under the 8(a) program for small disadvantaged businesses. The project is competitively awarded and falls under NAICS code 236220 for educational construction. Bids are due by August 17, 2026, at 4:00 PM EST, and interested parties must participate in a mandatory pre-proposal site visit scheduled for Thursday at 9:00 AM EST, with a possible extension to Friday. Attendance requires an RSVP no later than 2:00 PM CST on July 21, 2026, via email to the Project Manager and copied to the Contract Specialist and Contracting Officer. Amendment 0002 corrected the site visit time zone from CST to EST and clarified additional visit details. The solicitation is administered by the U.S. Army Engineer Support Center in Redstone Arsenal, Alabama, with primary points of contact being Kelvaun Kennedy and Kelly Hunnicutt, who can be reached by phone or email for further inquiries.

Commercial and Institutional Building Construction

POSTED

DEADLINE

FT HOOD OVERHEAD DOORS - W912DY-26-R-A076, (Services)

Solicitation # W912DY26RA076

This contract, identified as W912DY-26-R-A076, is a small business set-aside for facility maintenance services at Fort Hood, Texas, covering the operation, preventive maintenance, and corrective maintenance of approximately 136 automatic doors, 3,375 overhead doors, and commercial doors. The work includes adherence to all applicable federal, state, and local codes and regulations, and is governed by a Performance Work Statement that references detailed Technical Exhibits and inspection checklists for various door types. The contract has a base period from August 31, 2026, through August 31, 2027, with five optional one-year extensions through August 30, 2032, each valued at $1 million, leading to a potential total contract value of $5 million. Pricing is structured under a Firm Fixed Price model, with CLIN X003 for corrective/demand maintenance services accounting for the entire estimated value, while CLINs for management and preventive maintenance are listed at $0—raising concerns about pricing completeness. The solicitation requires proposals in three volumes: Technical Approach, Price and Rates, and Administrative Data, with strict page limits and submission protocols via the PIEE portal in searchable PDF format only. The evaluation process prioritizes Technical Approach and Past Performance significantly over price, with award intended through a trade-off approach rather than lowest price technically acceptable. Contractors must demonstrate technical feasibility, thoroughness, compliance with the PWS, and a proven track record of similar work, with performance history reviewed via CPARS. Mandatory clauses include requirements for cybersecurity compliance, antiterrorism training, whistleblower protections, and adherence to NIST SP 800-171 standards, alongside specific provisions for subcontracts, price reasonableness documentation, quality control plans, and prohibition of unbalanced pricing. Subcontracting is capped at 50% of the contract value for services, and all subcontractor quotes over $2,500 require at least two bids and formal justification for sole source awards. Invoicing must be submitted electronically through the Resident Management System to BASEOPSInvoice@usace.army.mil, with copies sent to the Contracting Officer’s Representative. The place of performance is Fort Hood, with inspection and acceptance occurring at Redstone Arsenal, Alabama, under FOB destination terms. A site visit is scheduled for August 6, 2026, at 1:30 PM CST, and all

Other Building Equipment Contractors

POSTED

DEADLINE

Seeking Sources for Utility Energy Services Contract (UESC) at Fort Hood, Texas

Solicitation # W912DY-26-UESC-FORTHOOD

The U.S. Army Corps of Engineers, Huntsville Center, is conducting market research to identify qualified firms capable of delivering a Utility Energy Services Contract (UESC) at Fort Hood, Texas, under solicitation number W912DY-26-UESC-FORTHOOD. This sources sought notice is not a request for proposals and does not obligate the government to award a contract or reimburse any costs incurred by respondents. The opportunity is classified under NAICS code 541330, indicating a focus on engineering services, and is intended to gather information on industry capabilities to support potential future procurement. All responses must be submitted by August 18, 2026, at 9:00 p.m. ET. The contracting office is located at Redstone Arsenal, Alabama, with the performance location identified as Fort Hood, Texas, ZIP code 76544. Primary point of contact for inquiries is Kara Malto, reachable via email at Kara.L.Malto@usace.army.mil or by phone at 256-895-7448. The notice is posted on SAM.gov, and interested parties are encouraged to review the official posting for any updates or additional details. Participation is voluntary, and submission of information does not constitute a formal bid or proposal.

Engineering Services

POSTED

DEADLINE

Modular Power Enclosures Program (MPEP) ConstructionThe Modular Power Enclosures Program includes the design, fabrication, and installation ofprefabricated, environmentally sealed, and EMP-shielded power enclosures specifically engineered for missile defense systems. These enclosures must meet rigorous performance standards to ensure operational reliability under extreme conditions, including electromagnetic pulse exposure, harsh weather, and prolonged field deployment. All components must be manufactured with precision to enable rapid on-site assembly while maintaining complete environmental and electromagnetic integrity, with materials and construction methods selected to withstand long-term exposure to corrosion, vibration, and thermal cycling. The project requires full compliance with Department of Defense technical specifications and quality assurance protocols throughout the entire lifecycle. The contract is a subcontract under the Department of Defense, with the prime activity managed by the W2V6 USA Engineering Support Center in Huntsville. Performance is expected to occur predominantly in Huntsville, Alabama, though logistics and transportation arrangements may extend beyond this location. The solicitation window opened on July 24, 2026, with responses required by August 10, 2026, leaving a limited timeframe for qualified vendors to submit proposals. The NAICS code 332323 indicates classification under Electrical Equipment and Equipment Manufacturing, signaling the technical specificity and industrial expertise required. Interested parties must demonstrate proven experience in defense-grade shielding technology, modular construction, and prior work with sensitive military systems to be considered eligible for award.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Commissioning and Testing ServicesThe contract solicits services for functional testing, systems commissioning, and performance verification of mechanical, electrical, and control systems within federal facilities, specifically under the Department of Defense’s W2V6 USA Engineering Support Center in Huntsville. The work involves ensuring all building systems operate as designed, meet performance specifications, and are fully integrated and validated prior to acceptance, with an emphasis on compliance with federal standards and operational readiness. The contract is structured as a subcontract with a NAICS code of 541330, indicating it falls under engineering services. Responses are due by August 10, 2026, at 1:00 PM, following a posting date of July 24, 2026. The place of performance is firmly designated as Huntsville, and while no specific set-aside provisions or point of contact details are provided, the scope requires specialized technical expertise in system commissioning across multiple disciplines. Contractors must be prepared to deliver rigorous verification protocols and documentation to confirm system integrity and functionality across federal infrastructure projects managed by the Department of Defense.

Engineering Services

POSTED

DEADLINE

Equipment Procurement and InstallationThe contract entails the procurement, delivery, and installation of military-standard compliant equipment including generators, HVAC units, security systems, and modular power enclosures, all required to meet MIL-STD specifications for ruggedness, reliability, and performance in demanding environments. This subcontract is part of a broader Department of Defense initiative led by the W2V6 USA Engineering Support Center in Huntsville, with all work to be performed at that location. The equipment will support critical infrastructure needs, ensuring operational continuity, environmental control, and physical security for defense-related facilities. All submissions must be received by August 10, 2026, with the solicitation having been posted on July 24, 2026. The NAICS code 423600 classifies this procurement under Electronic and Equipment Wholesalers, indicating the focus is on distribution and integration of specialized technical hardware rather than manufacturing. The contract does not specify set-aside provisions or small business preferences, and the point of contact details are not provided. Compliance with all military standards, timely logistics coordination, and secure installation protocols are essential to meeting contract obligations.

POSTED

DEADLINE

Protective Infrastructure and Facility ModificationsThe contract seeks subcontractors to design and execute construction or retrofitting of blast-resistant walls, hardened structures, secure entryways, and other physical protection systems aimed at enhancing facility security. Work is focused on Huntsville, with performance obligations centered there, and is classified under NAICS code 238990 for other specialized construction activities. The opportunity is issued by the Department of Defense through the W2V6 USA Engineering Support Center, with a deadline for responses set for August 10, 2026, and a posting date of July 24, 2026. This is not a set-aside contract, meaning it is open to all qualified bidders regardless of business size or ownership status. No point of contact is listed, and the solicitation number is not provided, suggesting the opportunity may require direct engagement through the SAM.gov portal for full details and submissions.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Design-Build Facility ConstructionThe contract mandates the full design-build delivery of secure commercial and institutional facilities, encompassing comprehensive architectural, structural, and MEP systems integration to meet stringent security and operational standards. All phases of the project—from initial design through construction and commissioning—are to be executed under a single contract vehicle, ensuring seamless coordination between disciplines and accountability for performance, schedule, and compliance with federal security requirements. The opportunity is designated as a subcontract under NAICS code 236220, with the Department of Defense through the W2V6 USA Engineering Support Center in Huntsville serving as the overseeing agency. Performance is required in Huntsville, and responses must be submitted by August 10, 2026, with the solicitation posted on July 24, 2026. While no specific set-aside classification is provided, the scope emphasizes compliance with defense infrastructure protocols, requiring contractors to demonstrate proven experience in delivering secure, high-integrity facilities within a design-build framework.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Utility Installation (Electrical, Communications, Water, Sewer)The contract calls for the installation of underground and above-ground utility systems at secure Department of Defense facilities in Huntsville, Alabama, encompassing power distribution, fiber optic communications, water supply, sewer lines, and storm drainage infrastructure. This subcontract is classified under NAICS code 237130 for utility system construction and requires full compliance with security protocols due to the sensitive nature of the sites. Work must meet rigorous technical and safety standards set by federal and military specifications, with all systems designed for long-term functionality, redundancy, and resistance to environmental and operational stressors. Responses are due by August 10, 2026, with the solicitation posted on July 24, 2026, through the SAM.gov platform. The contract is managed by the USA Engineering Support Center in Huntsville, and bidders must be prepared to coordinate with multiple government entities and possibly adhere to classified site access requirements. Performance is expected to occur entirely within the Huntsville area, and contractors must demonstrate proven experience in complex utility installations at secured governmental facilities, including prior work with military or federal infrastructure projects. All work must be completed in alignment with applicable federal, state, and local codes while maintaining operational security at all times.

Power and Communication Line and Related Structures Construction

POSTED

DEADLINE

Site Preparation and EarthworkThe contract titled Site Preparation and Earthwork involves comprehensive earthmoving activities including clearing, grading, excavation, backfill, and erosion control specifically for secure government construction sites. These services are essential to establish a stable and controlled foundation for sensitive infrastructure projects under the jurisdiction of the Department of Defense, with performance focused in Huntsville. The work is categorized under NAICS code 237990, indicating it falls within other heavy and civil engineering construction, and is structured as a subcontract opportunity, meaning prime contractors must solicit qualified subs to fulfill the scope. The solicitation was posted on July 24, 2026, with a firm response deadline of August 10, 2026, at 1:00 PM, providing a limited window for qualified firms to submit proposals. All work must comply with stringent security and environmental standards mandated by federal protocols, emphasizing precision, safety, and regulatory adherence in all phases of earthwork execution.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Notice of Intent to Modify FRR VI MATOC to Increase Capacity

Solicitation # PANHES-26-P-0000-030984

The United States Army Engineering and Support Center, Huntsville is notifying the public of its intent to modify the Facilities Repair and Renewal (FRR) Sixth Generation Multiple Award Task Order Contract (MATOC) by increasing its total programmatic ceiling from $450 million to $949 million through a sole-source action. This modification, valued at $499 million, is authorized under 10 U.S.C. 3204(a)(1) as implemented by RFO 6.103-1(c)(2)(ii), targeting the existing pool of 21 contractors—including four 8(a) businesses, seven small businesses, and ten other-than-small businesses—to expand the contract’s capacity. The increased capacity will enable the award of Modular Power Enclosures Program (MPEP) task orders and other task orders related to the FRR Program and Secure Facilities Program, covering design-build construction, site preparation, facility modifications, utility and infrastructure support, equipment procurement and installation, commissioning, and testing at various sites, including those identified by the Missile Defense Agency. The North American Industry Classification System code for this effort is 236220, Commercial and Institutional Building Construction, and all task orders will be issued on a Firm Fixed Price basis with fair opportunity afforded among MATOC holders. The Government seeks input from interested parties to determine whether future competitive procedures are warranted, requiring respondents to provide detailed information on their legal name, business size and socioeconomic status, capability to perform work across multiple states, past experience with FRR and protective infrastructure projects, and compliance with technical standards and regulations. All responses must be submitted electronically by 8:00 AM Central Daylight Time on August 10, 2026, to designated contracting personnel, include affirmations of active SAM registration with valid UEI and CAGE codes, and be limited to ten pages on official company letterhead. The contract administration and oversight will be managed by the Office of the Contracting Officer located at Redstone Arsenal, Alabama, with no formal evaluation weights, inspection criteria, or contract clauses specified beyond the general requirements for performance and compliance. Neither detailed line-item pricing, delivery schedules, FOB terms, nor specific security clearances or data compliance mandates are outlined in this solicitation, as it serves solely as a pre-solicitation notice to inform potential offers and assess market interest prior to a potential sole-source award.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Accident Prevention and Safety Plan (APP) DevelopmentThe contract requires the development and submission of site-specific Accident Prevention Plans (APP) tailored to installation and logistics operations, ensuring strict adherence to U.S. Army Corps of Engineers EM 385-1-1 and OSHA safety regulations. These plans must address hazard identification, risk mitigation, training protocols, and emergency response procedures applicable to the designated worksite in Teverola, Italy, with a zip code of 81030. The scope of work demands detailed, location-specific documentation that aligns with federal safety standards to safeguard personnel and operations during active duty periods. This subcontract is open for bids with a response deadline of August 24, 2026, and falls under NAICS code 541690, which covers other scientific and technical consulting services. The contracting entity is the Department of Defense through the W2V6 USA Engineering Support Center in Huntsville, indicating a defense-related operational context. While no set-aside preferences or point of contact details are specified, interested parties must prepare comprehensive APP documentation capable of withstanding regulatory scrutiny and supporting on-site safety compliance across all phases of military logistics and infrastructure activities.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE