Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Fuse NX Sand

Active
Z4878State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of Fuse NX Sand, a 10-ampere continuous, C-rated, full-range cannister mount fuse rated for 15.5 kilovolts with a 50,000 symmetrical ampere interrupting capacity. Approved manufacturers and part numbers include ABBAUTO151D883G11, COOPERFA4H10CODE5, and GENELEC9F59KBD010, ensuring compliance with specified technical requirements. The solicitation is issued by Nashville Electric Service under solicitation number Z4878, targeting state, local, and educational agencies. Responses are due by July 31, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 28, 2026. The place of performance is Nashville, Tennessee, and all deliveries must meet agency specifications for reliability and safety in utility applications. Primary point of contact for procurement inquiries is Bailey Allen, who can be reached at ballen1@nespower.com or by phone at 615-747-3724. The solicitation is accessible online via the vendor portal at https://vendor.nespower.com/?bid=Z4878. Interested vendors must submit bids in accordance with the posted deadline and technical criteria, as failure to comply with approved manufacturer part numbers or performance ratings may result in disqualification. No set-aside provisions are specified, and the contract is not restricted to small business or socioeconomic categories.

General Info

Procurement of 10A C-rated 15.5kV fuses for Nashville Electric Service, due July 31, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

Z4878_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, US
Organization / Agency
Tennessee → Nashville Electric Service
View Agency Profile
Office AddressNashville, TN, US
Contacts
Bailey AllenProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FUSE NX SAND 10A 15.5KV/CANSTR NX SAND FUSE, 10 AMPERES CONTINUOUS, C-RATED, FULL RANGE CANNISTER MOUNTING, 15.5KV, 50,000 INTERRUPTING-SYMMETRICAL AMPERES. Approved Manufacturers and/or Part Numbers: ABBAUTO151D883G11 COOPERFA4H10CODE5 GENELEC9F59KBD010

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Supply of Industrial Cable and Conduit (Electrical Components)The contract entails the supply and delivery of electrical cable and conduit assemblies specifically designed for military or critical infrastructure applications, requiring full compliance with MIL-STD packaging, labeling, and hazardous materials handling regulations to ensure operational readiness and safety. All components must meet stringent military standards for durability, performance, and environmental resilience under demanding conditions. Delivery is specified as FOB Destination to the Defense Logistics Agency Distribution Center in New Cumberland, Pennsylvania, placing responsibility for transportation and risk transfer on the supplier until the goods arrive at the designated location. The contract falls under NAICS code 335999 for other electrical equipment and component manufacturing and is structured as a subcontract within the broader Department of Defense procurement framework, administered by the Defense Logistics Agency. All activities must adhere to federal contracting guidelines and regulatory compliance requirements applicable to defense supply chains.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

N/A
View Details
NAICS: 335999
New
DIBBS
Shielding Gasket Supply – Electromagnetic Interference (EMI) Shielding ComponentsThe contract seeks the supply of one unit of an EMI shielding gasket, identified by NSN 5999016880111, a commercial off-the-shelf component critical for maintaining electromagnetic compatibility in defense electronics systems. This item is intended for use in sensitive military applications where interference mitigation is essential for operational integrity and performance. The solicitation is issued as a subcontract under the Department of Defense, specifically managed by the MARITIME SUPPLY CHAIN ESOC BUYS, with the place of performance designated as Tobyhanna, Pennsylvania, 18466-5050. The North American Industry Classification System code 335999 applies, reflecting its classification within miscellaneous electrical equipment and component manufacturing. The opportunity was posted on July 28, 2026, and responses must be submitted no later than August 10, 2026. The contract is publicly accessible via the DIBBS platform, though no specific point of contact or set-aside preferences are detailed. As a COTS item, the gasket must meet exacting military specifications for shielding effectiveness, durability, and environmental resilience despite its commercial origin, ensuring seamless integration into defense platforms without requiring custom modifications. The procurement underscores the ongoing demand for standardized, high-performance EMI solutions within the U.S. defense infrastructure.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
Supply of Electronic Shielding Gasket (NSN 5999-01-687-9053)
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
Battery Charger Supply (NSN 6130016252778)
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL COThe contract specifies the procurement of electrical brush contacts under part number 8037-169 by CEF Industries Inc., identified by CAGE code 00268, with the NSN 5977-01-095-5357. The brush grade must be CEF Grade 4430 and no substitutions are permitted; each brush must be individually marked with the manufacturer’s brush grade. The item is to be delivered in single-unit packaging conforming to MIL-STD-2073-1E, with marking compliant with MIL-STD-129 and palletization following DLA packaging requirements. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the strictest verification levels. The total quantity ordered is six units at a unit price of $6.00, totaling $36.00, with delivery required within 20 days FOB origin and no variance permitted in quantity. Inspection and acceptance occur at origin, and the shipment must be delivered to the Royal Jordanian Air Force Headquarters in Amman, Jordan, via the designated freight forwarder. Technical and quality requirements are governed by the DLA Master List referenced in RA001, with the revision effective on the solicitation issue date controlling compliance. The solicitation number is SPE4A6-26-T-10CL, with a response deadline of August 5, 2026, and the point of contact is Chinh Le of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
STRIP, ELECTRICAL GROUNThe contract solicitation is for one unit of a strip, electrical grounding with NSN 5999-01-588-3447, under purchase request 7017644309 for a quantity of two units, with delivery required within five days after delivery order. The solicitation number is SPE7M0-26-T-022G, issued on July 28, 2026, with responses due by August 10, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with DLA packaging standards and be physically marked per RQ017, while any non-accepted supplies must have government identification removed as per RQ011. The alternate offeror must submit a complete data package covering both the primary and alternate parts. The place of performance is Farmingdale, New York, 11735, and the contracting office is the Maritime Supply Chain ESOC Buys under the Department of Defense. The primary point of contact is Gerard Quinn at the provided email and phone number, and the solicitation is accessible through the DIBBS platform.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
KEYBOARD, DATA ENTRYThe contract solicitation SPE7M5-26-T-356J issued by the Defense Logistics Agency’s Active Devices Division seeks one unit of a data entry keyboard, identified by NSN 5999-01-678-3599 and part number DU-5K-TB-USB, under simplified acquisition procedures. The item must be delivered within 20 days of contract award to the Assault Craft Unit One at Naval Amphibious Base Coronado, San Diego, CA, with FOB Origin terms and destination inspection and acceptance by the Government. Packaging and marking must strictly conform to MIL-STD-2073-1E and MIL-STD-129, including direct bare item marking per RQ017 and adherence to DLA Packaging Requirements (RP001), with no special marking designated. The contract includes specific preservation methods and material codes, and delivery must be shipped via traceable freight, explicitly prohibiting parcel post. Unit pricing on the single line item ranges from $522.00 to $617.76 based on fragmented data, with an estimated total contract value of approximately $15,446, though no option quantities or ceiling values are specified. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses relating to cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous materials labeling, safeguarding of defense information, subcontracting, and compliance with export controls and prohibited suppliers. The offeror must represent as other than a small business and affirmatively disclose if providing covered defense telecommunications equipment under DFARS 252.204-7016, requiring full identification of providers, CAGE codes, and UEI. All submissions are required through the DIBBS portal by August 10, 2026, with payments processed exclusively via Wide Area WorkFlow. The contract is classified as fixed-price, with inspection and acceptance occurring at destination, and all deliverables are subject to compliance with mandatory preservation, packaging, and marking standards, as well as federal regulations on environmental safety and workforce equity.
ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThis contract governs the procurement of six power supply units with NSN 6130-01-690-8194 and part number CCP-00575, sourced from Crystal Group, Inc., under solicitation SPE7L7-26-T-4487. The items are to be delivered FOB origin within 161 days of contract award, with no tolerance for quantity variance, and must arrive at the designated receiving warehouse in Tracy, California. All supplies must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. The power supplies must adhere to strict quality and technical specifications referenced from the DLA Master List, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated. Attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively, and manufacturers may choose attribute or variable inspection methods. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the supplies, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier. Covered defense information provisions apply as this is designated a critical application item. The units must be palletized and shipped in accordance with DLA packaging directives, with transportation governed by DLAD procedural notes C19 and C20. The original delivery deadline was January 12, 2027, with a requested ship date of January 19, 2027, and inspection and acceptance are to occur at the destination. The unit of issue is each, with a total contract value of six units, and compliance with all referenced technical, quality, and regulatory standards is mandatory without exception.
DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, BUSHINGThe contract specifies the procurement of 863 units of an insulator, bushing, identified by NSN 5970010872610 and governed by the military specification MIL-I-49466 Revision dated 12/03/2014. This is classified as a commercial item and requires full compliance with DLA packaging standards, specifically MIL-STD-2073-1E, with packaging code U, unit container A1, and intermediate container E5. All items must be marked per MIL-STD-129 with a two-dimensional Data Matrix barcode, and no special marking is required. The insulators must be shipped FOB origin with delivery to New Cumberland, Pennsylvania, within 164 days of order, with inspection and acceptance occurring at the destination. Strict mercury restrictions apply: no intentional addition or direct contact with mercury or mercury compounds is permitted except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, and portable mercury-containing devices must have shock-proof construction and a secondary containment boundary as defined by NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise directed, and all non-conforming items require removal of government identification prior to return. The contractor must comply with FAR and DFARS clauses governing safeguarding of government information, cyber incident reporting, payment submissions via WAWF, prohibition of hexavalent chromium and hazardous materials, export controls, and restrictions on arbitration agreements. Packaging and transportation must align with DLA requirements and DFARS 252.247-7023, which governs ocean transportation. All representations required under SAM.gov, including UEI and CAGE codes, socioeconomic status, and compliance with defense telecommunications restrictions, are mandatory but not completed in the solicitation phase. The contract is fixed-price, administered by the ASC Commodities Division under Contracting Officer Angela Boyce, with no options, modifications, or pricing provided in Section B beyond the unit quantity.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
CABLE NIPPLE, ELECTRThe contract specifies the procurement of five cable nipples, electrical, with NSN 5975-01-382-7955, under solicitation SPE4A7-26-T-598P, with a required delivery within 20 days of award. The items must comply with all applicable DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, which governs specifications through R or I numbers. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs; unspecified attributes default to major. The manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916 unless constrained by contract terms. All supplies must be free of government identification if rejected, and sampling plans must follow zero-based acceptance criteria even when using MIL-STD-105 or ASQ Z1.4 for lot sizing. The procurement is for federal use under NAICS code 335999, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Keyanna McNeil-Johnson as the primary point of contact, and responses are due by August 5, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
LIMIT STOPThe contract pertains to the procurement of a Limit Stop item with NSN 4540012838273 and part number 1005276-3349, requiring a quantity of 12 units to be delivered within 20 days under FOB Origin terms with no variance allowed in quantity. All packaging must comply with ASTM D3951 and fully adhere to the DLA Master List of Technical and Quality Requirements, which take precedence, along with MIL-STD-129 for marking and labeling. Palletization must follow RP001 DLA Packaging Requirements, and shipping must be conducted via traceable means excluding parcel post. The delivery destination and freight address are identical, located at 1400 West Scott Road, Beatrice, NE 68310-7002, with the receiving activity identified as W90HCW. The unit price is $12.00 per EA, totaling $144.00, and the contract is issued under solicitation SPE8E8-26-T-4878 with a required delivery date of January 14, 2026. The item is governed by covered defense information provisions and incorporates technical and quality standards referenced by R and I numbers from the DLA Master List. The point of contact is Alexis Selby, and the procurement falls under NAICS code 335999, managed by the Defense Logistics Agency under the Department of Defense.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
INSULATING VARNISH, ELEThe contract specifies the procurement of Insulating Varnish, Electrical, identified by NSN 5970-00-442-0272, in quantities of two one-gallon units per CLIN, totaling four gallons. The product must comply with MIL-I-46058C, Revision C dated June 20, 2023, specifically Type I, Code K, and is classified as a Critical Application Item with a non-extendable shelf life of 18 months. Quality certification is mandated through QPL-46058, and the item must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129R, including special marking code 32 indicating shelf life. Mercury and mercury-containing compounds are strictly prohibited in any aspect of the product, preservation, packaging, or labeling, with exceptions limited to specific functional uses defined by NAVSEA. Hazard communication standards require approved Safety Data Sheets and OSHA Hazard Warning Labels, which must be reviewed by technical personnel and submitted to the DLA Aviation HMIRS office prior to award. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance. Delivery is FOB destination within five days of contract award to Camp Humphreys, South Korea, with no variance allowed in quantity. The contract includes strict adherence to DLA packaging and transport protocols, and all shipping documentation must reference DLAD PROC NOTES C19 and C20 for transportation routing. The required delivery date is July 28, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 335929
New
SLED
AWG 19 Strand Aluminum ConductorThe contract specifies the procurement of a specialized cable with a 19-strand aluminum conductor, 11 number 14 AWG round copper concentrics in a one-third configuration, and a minimum 45 mils point polyethylene jacket featuring red stripes, all manufactured in compliance with the latest edition of the NES EC-276 specification. Each cable unit must be supplied in three 1,000-foot lengths per reel, totaling 1,000 circuit feet per reel, with all reels required to be shipped on open flatbed trucks unless prior written approval is obtained for alternative transportation. The reels must be clearly stamped with the tare weight, net weight, and gross weight, and must include a metal center hub collar with an inside diameter of at least 2.75 inches, while overall reel dimensions cannot exceed 43 inches in width or 72 inches in height, and the maximum cable diameter must not surpass 1.47 inches. Only approved manufacturers—Prysmian, Kerite, and Okonite—are eligible to supply this cable. This solicitation is issued by Nashville Electric Service under solicitation number Z4870, with a response deadline of August 10, 2026, at 7:00 PM Eastern Time. The procurement is categorized under a state and local government entity in Tennessee, and the performance location is Nashville. Potential vendors must submit bids through the official portal linked in the solicitation data, and all inquiries should be directed to Jay Thompson, the primary procurement contact, via email at jethompson@nespower.com. The contract is open for bidding without specific set-aside classifications, and compliance with all technical, labeling, and shipping requirements is mandatory for proposal acceptance.
Other Communication and Energy Wire Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
SLED
Relay Basler Retrofit KitThe contract is for a Basler Retrofit Kit designed to replace existing ABB CO time overcurrent relays with a single-phase, case-less relay that fits inside the original ABB CO relay housing. The approved part number for this retrofit solution is BASLERBE1-50/51B-219, ensuring compatibility with legacy ABB equipment without requiring a full housing replacement. The upgrade aims to modernize protected systems while maintaining structural and spatial integrity within existing installations. The solicitation, numbered Z4877, was posted by Nashville Electric Service in Tennessee with a response deadline of July 31, 2026. It is categorized as a SLED procurement and includes a primary point of contact, Bailey Allen, reachable via email and phone for inquiries. The place of performance is in Nashville, Tennessee, and interested parties can access more information through the provided vendor portal link. No set-aside type or NAICS code is specified, indicating an open competition for qualified suppliers.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 335929
New
SLED
Cable CopperThe contract specifies the procurement of stranded compressed copper conductor cable with a 5 mil helically applied copper tape and a minimum 70 mils point polyvinyl chloride jacket, manufactured in compliance with the latest edition of NES Specification EC-562. Three separate lengths of 2,300 circuit feet each must be provided, twisted on individual reels to meet the total length requirement. All reels must be constructed of steel with an arbor hole of at least 5.25 inches inside diameter and must not exceed 50 inches in width or 84 inches in height. The maximum cable diameter is capped at 0.94 inches, and each reel must be clearly stamped with the tare weight, net weight, and gross weight. The cable must be shipped on open flatbed trucks unless prior written approval is obtained for alternative transportation. Approved manufacturers for this specification include KERITE, PRYSMIAN, and OKONITE, with the part number KERITE302C15-A4420 explicitly listed. The solicitation, titled Cable Copper under number Z4876, is issued by Nashville Electric Service in Tennessee with a response deadline of August 5, 2026 at 7:00 PM. The point of contact for procurement inquiries is Jay Thompson, reachable via email at jethompson@nespower.com. The contract is targeted for performance in Nashville, Tennessee, and is accessible through the agency’s vendor portal at the provided UI link.
Other Communication and Energy Wire Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
SLED
Meter SealThe contract is for the procurement of SEAL PLASTIC ORANGE METER SEALS featuring an acrylic body with an orange insert, a regular padlock design, and a stainless steel hasp, each marked with NES. The seals are to be supplied loosely packed in boxes of 100 units. Approved manufacturers and part numbers include STARPOLYSPUNI2, INNER-TC-2070, and BROOKSM6085604-27. The solicitation is issued by Nashville Electric Service under solicitation number Z4871, with a response deadline of August 3, 2026 at 7:00 PM. The contract is classified under a SLED government type and does not specify a set-aside type or NAICS code. The place of performance and the agency's location are both in Nashville, Tennessee. All inquiries and submissions must be directed to Alan Martinez, the primary procurement contact, via email at amartinez@nespower.com or by phone at 615-747-3720. Further details and submission requirements can be accessed through the vendor portal at the provided UI link.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 335929
New
SLED
Cable AluminumThe contract specifies a custom-built stranded compressed aluminum conductor cable with sixteen #12 AWG round copper concentrics and a minimum 70 mils point polyethylene jacket marked with red stripes, manufactured to meet the latest edition of NES Specification EC-276. A single 1,500-foot length of this cable is required, and it must be shipped on open flatbed trucks unless prior written approval is obtained for alternative shipping methods. Each reel must be clearly stamped with the tare weight, net weight, and gross weight, and must include a metal center hub collar with a minimum inside diameter of 2.75 inches. The reel dimensions are strictly limited to no more than 43 inches wide by 72 inches high, and the maximum cable diameter cannot exceed 1.89 inches. Only approved manufacturers—Prysmian, Kerite, and Okonite—are permitted to supply this cable. The solicitation is issued by Nashville Electric Service under reference number Z4868, with bids due by August 5, 2026, and the point of contact for procurement inquiries is Jay Thompson at jethompson@nespower.com.
Other Communication and Energy Wire Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423130
New
SLED
Tire CleanerNashville Electric Service is soliciting tire cleaner under solicitation number Z4873, with a response deadline of August 3, 2026, at 7:00 PM Eastern Time. The product required is a 32 fluid ounce trigger spray bottle of Westleys Bleche-Wite White Wall/Blackwall Tire Cleaner, and only approved manufacturers and part numbers CMLTIRE19-100, WESTLEYS555, TRW640651, and NAPA800002224 are acceptable. The solicitation is classified under a State, Local, and Educational (SLED) organization type, and performance is required in Nashville, Tennessee. The procurement contact is Alan Martinez, who can be reached at 615-747-3720 or amartinez@nespower.com for inquiries. The contract portal for submissions and further details is accessible through the vendor portal at the provided web link.
Tire and Tube Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 424120
New
SLED
Paper TowelsThe contract calls for the supply of 2 ply paper towel rolls with a minimum sheet size of 11 inches by 8.75 inches and a minimum of 85 sheets per roll, packaged in cartons of 30 rolls each. Only products from approved manufacturers, specifically Georgia Pacific part number 27385 and Boardwalk part number 6272, are eligible for submission. The solicitation, identified by number Z4875, is issued by the Nashville Electric Service under the Tennessee state agency and is categorized as a SLED procurement. Proposals must be submitted by August 4, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 28, 2026. All deliveries are to be performed in Nashville, Tennessee, and inquiries can be directed to Procurement Contact Shanna Faulk via email at sfaulk@nespower.com or phone at 615-747-3578, with additional details available through the vendor portal link provided.
Stationery and Office Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423120
New
SLED
Fuel FilterNashville Electric Service is soliciting bids for a fuel filter designated as FILTER FUEL MC FG2 FUEL FILTER, with approval limited to the part number FLEETFF149. The solicitation, identified by number Z4869, was posted on July 28, 2026, and requires responses no later than August 3, 2026, at 7:00 PM Eastern Time. This procurement is categorized under state, local, and education (SLED) procurement and is being managed by the agency’s Tennessee operations in Nashville. The place of performance is also Nashville, Tennessee, with no specific zip code provided. Alan Martinez, Procurement Contact, serves as the primary point of contact and can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. Interested vendors must submit their proposals through the official vendor portal linked via the provided UI link.
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 335314
New
SLED
Relay SocketThe contract solicits a 8-pin screw terminal surface mount relay socket rated for 10 amperes, with approved manufacturers limited to YOUNGNDS-8, MAGNACRF70-464-1, and POTTERB27E122 or equivalent models. This item is being procured by Nashville Electric Service under solicitation number Z4874, which was posted on July 28, 2026, with responses due by August 4, 2026. The procurement falls under a State, Local, or Education (SLED) agency classification and is intended for performance in Nashville, Tennessee. All bids must comply with the specified technical requirements and approved part numbers, and no substitutes are permitted unless explicitly designated as equal. The primary point of contact for procurement inquiries is Shanna Faulk, reachable via email at sfaulk@nespower.com or phone at 615-747-3578, and additional details can be accessed through the vendor portal at the provided link.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335929
New
SLED
Cable CopperThe cable is a stranded compact copper conductor with a 5 mil helically applied copper tape shield and a minimum 70 mil point thickness polyvinyl chloride jacket, manufactured to meet the latest edition of NES Specification EC-562. Each order consists of three 1,000-foot lengths of single conductor cable, paralleled on individual reels to total 3,000 circuit feet. The cable must not exceed a nominal diameter of 1.60 inches and must be shipped on open flatbed trucks unless prior approval is obtained for alternative transport. All reels must be steel with an arbor hole of at least 5.25 inches inside diameter and must not exceed 50 inches in width or 96 inches in height. Each reel must be clearly stamped with the tare weight, net weight, and gross weight. Only approved manufacturers—Prysmian, Kerite, and Okonite—are permitted to supply this cable. The solicitation, issued by Nashville Electric Service in Tennessee, has a response deadline of August 10, 2026, and is accessible through the vendor portal linked in the contract data.
Other Communication and Energy Wire Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
SLED
Locking BandThe locking band is a one-piece band constructed of 304 stainless steel with a thickness of .022 inches, designed for quick, tool-free installation on electric meters. It features an integrated thumb screw with a flathead slot for manual tightening or loosening, and both the thumb screw and its receiver are permanently affixed to the ring to prevent loss of parts and enable one-handed operation. The band opens and closes by engaging the thumb screw into its receiver and can be secured with or without a barrel lock for added flexibility. A standardized slot is incorporated to accept a common seal, and the design allows side-entry installation from either side of the meter. The optional barrel lock includes a keyless insertion system, is compatible with Nashville Electric Service’s current keying standard, and features a weather seal to guard against dirt and debris. The barrel lock is standard length and ensures durability in outdoor conditions. The contract, titled Locking Band and identified by solicitation number Z4867, is issued by Nashville Electric Service under the Tennessee state agency and is open for bid through the vendor portal. The solicitation was posted on July 27, 2026, with a response deadline of August 3, 2026. The sole approved manufacturer and part number is DEWAL CH3001. Procurement inquiries should be directed to Alan Martinez, the primary contact, via email at amartinez@nespower.com or by phone at 615-747-3720. The performance location is Nashville, Tennessee, and the contract is targeted at state, local, and educational government entities under a SLED classification. Bidders must comply precisely with the material, dimensional, and functional specifications to meet the technical requirements for secure, long-term utility use.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336370
New
SLED
Supply of 22" Windshield Wiper Blades (TRICO 22-15B / MASTER P MP22B)Nashville Electric Service is seeking to procure 900 units of 22-inch windshield wiper blades, specifically the TRICO 22-15B or MASTER P MP22B models, with no installation or additional services required. The solicitation is classified as a subcontract under NAICS code 336370 and was posted on July 24, 2026, with responses due by July 30, 2026, at 7:00 PM. The place of performance is in Nashville, and interested parties must submit their bids through the vendor portal at the provided link. All units must meet the specified model requirements, and vendors are expected to deliver the product as-is without any added support services.
Motor Vehicle Metal Stamping

POSTED

5 days ago

DEADLINE

in 1 day
View Details