Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FUSEHOLDER, BLOCK

Active
SPE7M5-26-T-401NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one commercial off-the-shelf fuse holder block, identified by NSN 5920-01-522-0649 and Cooper Bussmann part number R25100-1CR. The order is managed by the Department of Defense Active Devices Division under solicitation SPE7M5-26-T-401N. Delivery is required within 20 days to the USS Rushmore LSD 47, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, specifically referencing MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. The contract specifies a zero percent quantity variance and requires compliance with the DLA Master List of Technical and Quality Requirements.

General Info

DoD procurement of one Cooper Bussmann fuse holder for USS Rushmore within 20 days.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335313 - Switchgear and Switchboard Apparatus ManufacturingView NAICS

Place of Performance

UNIT 100143 BOX 1, FPO, AP, 96677, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-401N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Matthew Stanko
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FUSEHOLDER,BLOCK
FUSEHOLDER, BLOCK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS IS A COMMERCIAL OFF-THE-SHELF ITEM.
COOPER BUSSMANN, LLC 71400 P/N R25100-1CR
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017808589 0001 EA 1.000
NSN/MATERIAL:5920015220649
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M5-26-T-401N
SECTION B
PR: 7017808589 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N21530
USS RUSHMORE LSD 47
UNIT 100143 BOX 1
FPO AP 96677
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N21530
USS RUSHMORE LSD 47
DLA VENDORS: USE VSM FOR
US
M/F: (TCN) N2153062110222
RDD: 777
PROJ: ZH9 TP 2
SUPP ADD: N48096 SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: V9B ADV: 2A FC: VO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
SPE7M5-26-T-401N NSN/Part Number: 5920-01-522-0649 Quantity: 1 EA Purchase Request: 7017808589QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-401S
This solicitation, issued by the Department of Defense Active Devices Division under contract number SPE7M5-26-T-401S, is for the procurement of one cartridge fuse, identified by NSN 5920-01-587-0785. The requirement specifies a delivery timeline of 20 days after the order is received and is categorized under NAICS code 335313. The contract adheres to DLA packaging requirements and incorporates specific technical and quality standards as outlined in the DLA Master List. Additionally, it mandates the removal of government identification from any non-accepted supplies. Alternate offerors must provide a comprehensive data package for both approved and alternate parts to be considered.
ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-356X
The contract specifies the procurement of a circuit breaker, part number MS25361-75, manufactured in compliance with SAE AS58091 Revision D dated 08/01/1999, with no commercial substitutes allowed without prior written government approval. The item is classified as a critical application item and must meet strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware except in limited, explicitly defined exceptions such as functional batteries or instruments, with additional requirements for secondary containment and shockproofing for portable devices containing mercury. The use of Class I ozone-depleting substances is entirely prohibited in any phase of design, manufacturing, or testing unless approved in writing by the contracting officer, overriding any conflicting specification language. The item must be packaged, marked, and shipped in full compliance with MIL-STD-2073-1E and MIL-STD-129, with packaging code U, preserved using Method 41, and shipped FOB origin to the designated receiving warehouse in Tracy, California. Delivery is required within 147 days of contract award, with a mandatory ship date of January 5, 2027, and no variance in quantity allowed—exactly 12 units must be delivered. The NSN is 5925-01-080-1371, and all transportation details adhere to DLA procedures C19 and C20. The solicitation number is SPE7M5-26-T-356X, issued under NAICS code 335313 by the Department of Defense’s Active Devices Division, with a response deadline of August 10, 2026, and inspection and acceptance performed at the destination.
ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
SWITCH SUBASSEMBLY
Solicitation # SPE7M8-26-T-5938
This solicitation, issued by the Department of Defense Electrical Devices Division, is for the procurement of two switch subassemblies under National Stock Number 5930-01-274-1027. The contract requires delivery within 136 days after the order is placed and is being managed under solicitation number SPE7M8-26-T-5938. Performance is designated for Tracy, California, and the procurement falls under NAICS code 335313. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the contract requires the removal of government identification from any non-accepted supplies. Alternate offerors must provide a comprehensive data package covering both the approved and alternate parts to be considered for the award.
ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
PUSH BUTTON
Solicitation # SPE7M8-26-T-5627
The solicitation for PUSH BUTTON under contract number SPE7M8-26-T-5627 seeks 75 units of the item with NSN 5930-12-359-1370, with a delivery requirement of 134 days after contract award. The procurement is governed by DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, where any technical or quality specifications marked with an R or I number must be consulted directly from the official DLA website. For this simplified acquisition, the version of the master list in effect on the solicitation issue date controls compliance. The offeror must provide a complete data package including detailed information for both the approved part and any alternate part. The contract is issued by the Department of Defense, specifically the Electrical Devices Division, with performance required at New Cumberland, PA, 17070-5002. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the NAICS code 335313 identifies it as falling under the manufacturing of electrical equipment. Primary point of contact is Kathleen Moore at the provided email and phone number, and all submissions must be made through the DIBBS system via the specified link.
ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
LOCKOUT DEVICE
Solicitation # SPE7M2-26-T-6208
This solicitation, issued by the Department of Defense Nuclear Reactor Program under solicitation number SPE7M2-26-T-6208, is for the procurement of five lockout devices with part number 5925-01-145-6256. The contract is a total small business set-aside under NAICS code 335313, with a delivery requirement of 161 days after receipt of order. Performance is located in New Cumberland, Pennsylvania. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards and CMMC Level 2 self-assessment for cybersecurity. It strictly prohibits the intentional addition of mercury or mercury-containing compounds to hardware, with specific exceptions for functional components like batteries or sensors. Additionally, the contract requires the removal of government identification from non-accepted supplies and mandates that alternate offerors provide a complete data package for both approved and alternate parts.
NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5945
Solicitation SPE7M8-26-T-5945 is a federal request from the Department of Defense Electrical Devices Division for 34 units of sensitive switches, identified by NSN 5930-00-914-6461. The delivery requirement is 220 days after receipt of order. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential demand volatility and should use the DIBBS system to submit quotes or no-bid notifications to maintain communication with buyers. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a prohibition on providing covered telecommunications equipment. Small business joint ventures must provide specific representations under FAR and DFARS guidelines. Additionally, contractors must prepare for a transition to the Account Management and Provisioning System for VSM access and are prohibited from using additive manufacturing processes unless specifically authorized.
ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-26-T-5514
The contract is for the procurement of a SWITCH ASSEMBLY with NSN/Part Number 5930-01-632-1608, requiring a quantity of 8 units under Purchase Request 7017601057. Delivery must be completed within 168 days after award. The solicitation number is SPE7M8-26-T-5514, issued on July 23, 2026, with responses due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the acquisition type and date of the solicitation or amendment. For non-accepted supplies, the alternate offeror must submit a complete data package including detailed information for both the approved and alternate parts. The acquisition is classified under NAICS code 335313 and managed by the Electrical Devices Division of the Department of Defense. Performance location is in San Diego, California, 92136-3581, with Don Diego Boler listed as the primary point of contact, reachable via phone and email provided.
ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-5939
This contract is for the procurement of three pressure switches, identified by NSN 5930145479825 and part number 44036462AA from Thales DMS France SAS. The item is designated as a critical application item. Delivery is required within 31 days, with a need ship date of September 22, 2026, and an original required delivery date of November 5, 2026. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality and packaging must adhere to strict standards, including DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling. Sampling methods must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Inspection and acceptance will take place at the destination. The contract specifies that all DLA Master List technical and quality requirements take precedence over commercial packaging standards.
ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M0-26-T-038K
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 335313
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-5676
The contract pertains to the procurement of 10 units of a SENSITIVE SWITCH, identified by NSN 5930-01-665-6282, under Purchase Request 7017695597. Delivery is required within 183 days after award. The solicitation, numbered SPE7M8-26-T-5676, was posted on July 30, 2026, with a response deadline of August 10, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the specified DLA web portal, with the applicable revision determined by the solicitation or award date depending on the acquisition type. For simplified acquisitions, the version in effect on the solicitation issue date or award date controls, while large acquisitions adhere to the RFP issue date version unless an amendment supersedes it. The alternate offeror must submit a complete data package containing specifications for both the approved and alternate parts. The place of performance is Tracy, California, 95304-5000, and the contracting office is the Electrical Devices Division under the Department of Defense. Primary point of contact is Dondiego Boler, reachable via email and phone provided. No government identification is to be removed from non-accepted supplies, and no additional data is available to supplement this requirement beyond the master list obligations.
ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
PUSH BUTTON
Solicitation # SPE7M8-26-T-5630
The contract solicitation titled PUSH BUTTON under solicitation number SPE7M8-26-T-5630 seeks the procurement of 13 units of a push button component identified by NSN 5930-01-611-3404, with a delivery requirement of 56 days after award. The solicitation is governed by the DLA Packaging Requirements for Procurement and incorporates technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date for simplified acquisitions. The offeror must provide a complete data package covering both the approved and alternate parts, as no existing data is available for the government’s reference. The contract is issued by the Department of Defense’s Electrical Devices Division with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, under a NAICS code of 335313 for electrical equipment manufacturing. Primary point of contact is Dawn MacLean, reachable via phone and email provided, with additional details accessible through the DIBBS portal.
ELECTRICAL DEVICES DIV

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 335313
New
DIBBS
TRIPPER, CIRCUIT BRE
Solicitation # SPE7M5-26-T-402P
ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
Solicitation # SPE7M5-26-T-402L
This contract, identified as SPE7M5-26-T-402L, is a solicitation by the Department of Defense Active Devices Division for the procurement of one variable resistor. The item is identified by NSN 5905996713377 and part number 86-04014 from Welin Lambie Limited. This is designated as a critical application item with a required delivery date of August 7, 2026, and a delivery window of 20 days. The agreement specifies that delivery and inspection will occur at the destination, with the shipment directed to the USS Boxer LHD 4. Compliance with DLA packaging requirements, MIL-STD-129 marking standards, and MIL-STD-2073-1E packaging data is mandatory. Technical and quality requirements are governed by the DLA Master List, and the contract strictly prohibits the inclusion of government identification on non-accepted supplies.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-401H
This contract is for the procurement of 13 electrical plug connectors, identified by NSN 5935015998022 and ITT Cannon part number KJA6T25W42PNL. The order is managed under solicitation number SPE7M5-26-T-401H for the Department of Defense, with a required delivery date of December 26, 2026, and a need ship date of February 2, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The shipment must be delivered to DLA Distribution Warner Robins in Georgia. Packaging must adhere to DLA requirement RP001 and MIL-STD-129, with specific instructions to follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract incorporates various technical and quality requirements from the DLA Master List, including the removal of government identification from non-accepted supplies as per RQ011.
Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-Q-0864
This contract is a firm fixed price solicitation for two electrical receptacle connectors, identified by NSN 5935-01-676-3395 and part number D38999/24FG11SN. The items are classified as critical application components and must adhere to MIL-DTL-38999 specifications. Delivery is required within 20 days after order to the Naval Surface Warfare Center in Picatinny Arsenal, New Jersey, with inspection and acceptance occurring at the destination. The procurement is subject to strict quality and environmental standards, including a prohibition on Class I ozone-depleting substances and compliance with the Qualified Products List. Notably, any material manufactured by TE/Deutsch Products with lot date codes between December 16, 2016, and May 13, 2022, is strictly prohibited. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, and shipments must be sent via the fastest traceable means rather than parcel post.
Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECE
Solicitation # SPE7M5-26-T-403M
This contract is for the procurement of one connector body, identified by NSN 5935-01-363-1067, under solicitation SPE7M5-26-T-403M. Approved manufacturers include Northrop Grumman Systems Corp, Amphenol Corp, and ITT Cannon LLC. The delivery is required within 20 days after the order is received, with a final required delivery date of August 7, 2026. Shipping is FOB Origin and must be sent via the fastest traceable means to Whiteman AFB in Missouri. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging standards based on whether the material is hazardous per FED-STD-313. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will take place at the destination. All technical and quality requirements are governed by the DLA Master List.
Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-402E
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-402E, is for the procurement of one radio frequency filter, identified by NSN 5915-12-360-5867. The contract requires delivery within 20 days after receipt of the order, with the place of performance located in Klamath Falls, Oregon. The agreement incorporates specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract specifies the removal of government identification from any non-accepted supplies and requires alternate offerors to provide a complete data package for both approved and alternate parts. The response deadline for this federal acquisition is August 24, 2026.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 444180
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M5-26-T-403H
This contract is for the procurement of five digital microcircuits, specifically part number 1003935G-3 from BAE Systems Information and Electronic, under NSN 5962-01-627-5783. The agreement mandates strict adherence to Federal Supply Class 5962 standards, requiring the contractor to maintain comprehensive supply chain traceability and provide a completed DLA Land and Maritime Form 918. Documentation must be submitted via email for approval by the contract administrator at least 15 days before the delivery date, as shipment is prohibited without written authorization. The delivery is set for 197 days after order, with the destination and inspection point located in Columbus, Ohio. Technical requirements emphasize rigorous packaging standards, including MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection to prevent damage to component leads. Additionally, the contractor must comply with CMMC Level 2 self-assessment, follow MIL-STD-129 marking guidelines, and ensure lead finish markings adhere to IPC/JEDEC J-STD-609.
Other Building Material Dealers

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 335312
New
DIBBS
RESOLVER, ELECTRICAL
Solicitation # SPE7M5-26-T-355V
The contract pertains to the procurement of five electrical resolver units with NSN 5990-00-573-4731, under solicitation SPE7M5-26-T-355V, with a delivery requirement of 20 days after award. The supplier must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment. All supplies must adhere to DLA packaging guidelines, and any government identification must be removed from non-accepted items. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Documentation for source approval is mandatory, and the alternate offeror must submit a complete data package covering both the primary and alternate parts. The solicitation closed on August 10, 2026, and is managed by the Department of Defense’s Active Devices Division, with Jeanette Heisey as the primary point of contact.
Motor and Generator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 444180
New
DIBBS
RECTIFIER, SEMICONDU
Solicitation # SPE7M5-26-T-401R
This contract is for the procurement of one semiconductor rectifier, specifically part number 36MT120 manufactured by Infineon Technologies Americas Corp, under NSN 5961-01-543-7026. The item is designated as a critical application item, and the government has specified that surplus stock is not acceptable. Delivery is required within 20 days after the order, with a required delivery date of August 6, 2026, shipping to the USS John P Murtha LPD 26. The contractor must adhere to strict quality and technical standards, including supply chain traceability documentation and qualification requirements for Federal Supply Classes 5961 and 5962. Packaging and marking must comply with MIL-STD-129 and IPC/JEDEC J-STD-609 to properly identify lead or lead-free attributes. Additionally, the contract mandates specific DLA packaging requirements and the removal of government identification from any non-accepted supplies.
Other Building Material Dealers

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-T-360L
The contract solicitation is for 128 electrical connector receptacles with NSN 5935-00-752-4943, under solicitation number SPE7M5-26-T-360L, issued by the Department of Defense’s Active Devices Division. The delivery schedule requires fulfillment within 180 days from award, with responses due by August 10, 2026. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific mandates for export control of technical data under ITAR or EAR regulations. Disclosure or transfer of this data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce, and only contractors with approved US/Canada Joint Certification Program status, documented training in handling DOD export-controlled data, and explicit DLA authorization may access it. Additional compliance obligations include proper physical marking of items, removal of government identification from non-accepted supplies, and adherence to DLA packaging standards. The contract is classified as a federal procurement under NAICS code 334417, with performance designated in Anniston, Alabama, and point of contact information provided for inquiries.
Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-403F
This contract is for the procurement of 39 electrical plug connectors, identified by NSN 5935-01-220-5512 and part number MS3456W22-13S. The items must adhere to SAE-AS50151E and SAE AS34561 standards and are designated as Qualified Products List items. A critical requirement is that the contractor must include a notice in each package informing the user that a backshell is required to complete the assembly, providing specific NSNs for both straight and right-angle styles. The agreement prohibits the use of Class I ozone-depleting substances and the intentional addition of mercury, except in specific functional cases approved by NAVSEA. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Delivery is set for 161 days after order, with shipping destined for DLA Distribution Warner Robins. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.
Nonferrous Forging

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details
NAICS: 334418
New
DIBBS
ELECTRONIC MODULE, S
Solicitation # SPE7M5-26-T-401K
This contract is for the procurement of three standardized electronic modules, identified by NSN 5963200018264 and associated with Pivotal Power Inc part numbers 843-01-PL and 843-05. The agreement specifies a delivery timeframe of 73 days after receipt of order, with a required delivery date of May 3, 2027. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Strict technical and quality standards apply, including the prohibition of intentionally added mercury except in specific functional cases. The items require rigorous electrostatic discharge and electromagnetic interference protective packaging in accordance with MIL-PRF-81705 and MIL-STD-129. Suppliers must ensure all barrier materials come from qualified manufacturers on the QPL-81705 list and adhere to DLA packaging requirements for procurement to prevent damage to pins and leads during transport.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
ELECTRONIC MODULE, S
Solicitation # SPE7M5-26-T-401U
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-401U, is for the procurement of one standardized electronic module, identified by NSN 5963-01-466-1972. The contract requires delivery within 20 days after the order is placed and specifies that the place of performance is FPO 96671. The agreement incorporates specific technical and quality requirements as defined by the DLA Master List, including RP001 for packaging and RQ011 regarding the removal of government identification from non-accepted supplies. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components. Responses are due by August 24, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 13 days
View Details