FXSB 26-6837 Repair Replace Hangar Roof B11525

The project FXSB 26-6837 Repair Replace Hangar Roof B11525 involves the complete replacement of the roofing system on Building 11525, a historic one-story steel and cast concrete structure originally constructed in the early 1940s and located at JBER, Alaska, with a total area of 113,000 square feet. The building features a prominent high barrel roof measuring approximately 200 feet by 280 feet, along with two smaller low roof sections each around 35 feet by 280 feet and one additional low section measuring about 62 feet by 242 feet. The scope requires the removal of the existing built-up roof from the barrel center section and the east side low roof section down to the decking, followed by the installation of a new fully adhered 3-ply SBS-Modified BUR roof assembly with a granular cap sheet on the barrel section and a new 90-mil EPDM roof assembly on the south lower section. All related components including roof drains, flashings, vent pipe penetrations, cover boards, vapor barriers, cant strips, and metal copings and trim must also be replaced with new materials. The work is subject to strict adherence to the design specifications outlined in Sheets AD-101 and A-101. The solicitation is issued under FA500026Q0025 as a combined contract with a Total Small Business Set-Aside under FAR 19.5 and NAICS code 238160, ensuring eligibility only for small business concerns. The proposed site visit is scheduled for June 8, 2026, at 12:00 PM. Offers must be submitted by July 7, 2026, at 1:00 PM local time, with mandatory acknowledgment of Amendment 0004 through one of three prescribed methods, and failure to do so may result in rejection of the proposal. The procuring activity is the Department of Defense through the FA5000 673 Cons Lgc office located at JBER, Alaska, with Christopher Nelson and Robin Cole-Barden designated as the primary and secondary points of contact respectively. No contract value, delivery schedule, pricing details, inspection criteria, or packaging requirements are specified in the available documentation.