This Solicitation opportunity from Department Of Defense was posted on May 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

GAGE, DIFFERENTIAL, D

Closed

SPE4A5-26-T-163SFederal

Submission Closed05/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519

New

DIBBS

ELECTRODE, REFERENCEThe contract pertains to the procurement of a single unit of a reference electrode, identified by the National Stock Number (NSN) 6630-01-690-9700. This solicitation, numbered SPE2DH-26-T-4564, was issued by the Defense Logistics Agency under the Department of Defense. It was posted on June 15, 2026, with a response deadline set for June 22, 2026, indicating a short window for submission. The procurement process is a federal solicitation without any specified set-aside or particular socioeconomic targeting. Details regarding the place of performance and specific point of contact are not provided, reflecting a standard federal solicitation structure. The procurement focuses on acquiring this specialized component likely for defense-related applications, with complete oversight by a federal agency to ensure compliance with government acquisition policies. Additional information and documentation for this solicitation can be accessed through the provided government procurement portal.

Defense Logistics Agency

POSTED

DEADLINE

PRESSURE MONITOR KIThe contract involves the procurement of a single unit of a Pressure Monitor Kit identified by NSN/Part Number 6515-01-334-3233. The purchase request number associated with this acquisition is 7017073109. This solicitation, numbered SPE2DS-26-T-135Z, was posted on June 8, 2026, with a response deadline set for June 15, 2026. The solicitation is issued by the Defense Logistics Agency under the Department of Defense, indicating it is intended for federal government use. The contract does not specify any set-aside type or associated NAICS code, and the place of performance details such as city, state, and ZIP code are not provided. The solicitation appears to be broadly open without preference designations. While no specific point of contact or detailed office address is listed, the contract can be accessed and responded to via the Defense Logistics Agency's DIBBS platform. This procurement reflects a standard federal government acquisition of specialized equipment to support defense operations.

Defense Logistics Agency

POSTED

DEADLINE

STADIMETERThe contract is a solicitation issued by the Defense Logistics Agency, under the Department of Defense, for the procurement of eight units of stadimeters, identified by the National Stock Number 6605-01-168-8508. The solicitation, numbered SPE4A5-26-T-239R, was posted on June 15, 2026, with a response deadline set for June 23, 2026. This contract does not specify any set-aside type or detailed NAICS code and is intended for federal acquisition purposes. The place of performance and detailed office location information are not provided within the contract data. The purchase request associated with this solicitation is numbered 7017147774. Interested parties can access additional solicitation details through the federal procurement website linked in the contract data. The acquisition is aimed at fulfilling requirements for stadimeters, which are precision optical instruments used primarily by military and defense organizations.

Defense Logistics Agency

POSTED

DEADLINE

READOUT, INCANDESCENThe contract pertains to the procurement of 465 units of a product identified as READOUT, INCANDESCEN, associated with the National Stock Number (NSN) 6210-01-343-1481. The solicitation number for this contract is SPE4A6-26-T-92U6, and it was issued by the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline set for June 23, 2026. This contract is a federal solicitation without specified set-aside provisions or NAICS code, and the exact location of performance and agency office address were not detailed. The procurement details and the solicitation are accessible through the provided DLA Business Systems link, allowing interested parties to review and respond within the specified timeframe. The contract facilitates the acquisition of these items to support defense logistics supply requirements.

Defense Logistics Agency

POSTED

DEADLINE

61--VOLTAGE REGULATOR SThe Department of Defense's Defense Logistics Agency (DLA) Land and Maritime office in Columbus, Ohio, is seeking quotes for the procurement of 322 units of voltage regulators (NSN 6110015339768). This solicitation, identified by number SPE7M126T144U, is a Service-Disabled Veteran-Owned Small Business (SDVOSBC) set-aside under NAICS code 334519. The approved source for the voltage regulators is specified as the part number 92878 2001733 REV J ITEM 17. Delivery is required to DLA Distribution Depot Hill within 10 calendar days after order (A Do). The solicitation is issued as a combined RFQ and all quotes must be submitted electronically by the deadline of June 26, 2026. Hard copies of the solicitation, as well as specifications, plans, or drawings, are not available. All responsible sources may submit a quote, which will be considered if received timely. Questions related to the solicitation can be directed via email to the designated buyer contact provided in the solicitation notice. Interested parties can access the solicitation and submit responses through the provided online portal.

DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

This contract involves the procurement of five units of a differential dial indicating gage, identified under NSN 6685-01-529-2830 and part number 06ACX150X15A5BXAXX02. The contract number SPE4A5-26-T-163S specifies delivery within 171 days to the Defense Distribution Depot Susquehanna (DDSP) in New Cumberland, Pennsylvania. The items must meet stringent quality and technical requirements set forth by the Defense Logistics Agency (DLA), including packaging standards per DLA Packaging Requirements for Procurement (RP001), compliance with MIL-STD-129 marking, and adherence to sampling methods according to MIL-STD-1916 or ASQ H1331 where applicable. Inspection and acceptance are to be conducted at the destination, ensuring the items meet the contract’s specifications before final acceptance. Packaging is to comply with FED-STD-313 and ASTM D3951 standards, with special provisions if the material is hazardous. The contractor must use DoD-authorized unit of issue codes and ensure palletization as required by DLA protocols. The solicitation and contract dictate that all referenced DLA Master List requirements override general commercial standards. The primary contact for the contract is Aliza Wyche of the Department of Defense, ensuring communication and coordination. The contract is issued for federal procurement under NAICS code 334519, with all terms including delivery, inspection, and acceptance strictly enforced to meet the Department of Defense’s quality and logistical demands.

General Info

Procurement of five differential dial gages, delivered in 171 days, meeting DLA quality and packaging standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

334519 - Other Measuring and Controlling Device Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-163S Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 19

Solicitation

Response DeadlineMay 27

Deadline has passed

Submission Closed

05/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

ALIZA WYCHE

contact@example.gov

+1 (555) 000-0000

Full Description

GAGE,DIFFERENTIAL,D
GAGE,DIFFERENTIAL,DAIL INDICATING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CAMERON ENERGY SERVICES CORP. 05991 P/N 06ACX150X15A5BXAXX02
FAIRBANKS MORSE, LLC 7PZX0 P/N 10570852 ITEM NO. 4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016847721 0001 EA 5.000
NSN/MATERIAL:6685015292830
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
SPE4A5-26-T-163S
SECTION B
PR: 7016847721 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/15/2026 Original Required Delivery Date:11/15/2026
SPE4A5-26-T-163S NSN/Part Number: 6685-01-529-2830 Quantity: 5 EA Purchase Request: 7016847721QTY: 5 Delivery: 171 days ADO