Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GAGE, PRESSURE, DIAL

Active
SPE4A0-26-T-4131Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of four dial pressure gauges with critical application status, identified by part numbers 25-1009-SW-02L-VAC/15PS and 25-1009-SW-L02-30IMV&15# from Ashcroft Inc, and 25-1009SW-02L-30 IMV & 15 PSI from Tri-State Technical Sales Corp, all under NSN 6685017140256. The items must be delivered within five days FOB origin with no variance in quantity, and inspection and acceptance occur at the point of origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, including standards for packaging under MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise dictated, and critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Packaging and palletization comply with DLA-specific requirements, and the shipment must avoid parcel post, using only the fastest traceable means to the specified delivery address at Puget Sound Naval Shipyard. Documentation for source approval, measurement equipment calibration, and removal of government identification from non-accepted items are also required. The contract is issued under SPE4A0-26-T-4131 with a required delivery date of June 26, 2026, and the point of contact is Latitia Orange of the Department of Defense’s Aviation Supply Chain ESOc Buys.

General Info

Procure four dial pressure gauges under NSN 6685017140256, deliver FOB origin in five days, comply with MIL-STD and DLA requirements.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

1400 FARRAGUT AVE, BREMERTON, WA, 98314-5001, US

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4131.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
LATITIA ORANGE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GAGE,PRESSURE,DIAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RT001: MEASURING AND TEST EQUIPMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
GAGE,PRESSURE,DIAL
CRITICAL APPLICATION ITEM
ASHCROFT INC 38056 P/N 25-1009-SW-02L-VAC/15PS
ASHCROFT INC 38056 P/N 25-1009-SW-L02-30IMV&15#
TRI-STATE TECHNICAL SALES CORP 4B241 P/N 25-1009SW-02L-30 IMV & 15 PSI
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A0-26-T-4131
SECTION B
PR: 7017318413 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017318413 0001 EA 4.000
NSN/MATERIAL:6685017140256
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N4523A
PUGET SOUND NAVAL SHIPYARD IMF
1400 FARRAGUT AVE
BREMERTON WA 98314-5001
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N4523A
PUGET SOUND NAVAL SHIPYARD IMF
MAINT FAC REC OFFICER BLDG 514
1400 FARRAGUT AVE
BREMERTON WA 98314-5001
US
M/F: (TCN) N4523A61742311
RDD: 999
PROJ: 6V3 TP 1
SUPP ADD: N4523A SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: FC: F3
Need Ship Date:00/00/0000 Original Required Delivery Date:06/26/2026
SPE4A0-26-T-4131
SECTION B
PR: 7017318413 PRLI: 0001 CONT’D
SPE4A0-26-T-4131 NSN/Part Number: 6685-01-714-0256 Quantity: 4 EA Purchase Request: 7017318413QTY: 4 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
SWITCH, SOLID STATE
Solicitation # SPE7M8-26-T-5686
The contract is for the procurement of three solid state switches under NSN 5930-01-312-4172, with a delivery requirement of 232 days after order. The solicitation number is SPE7M8-26-T-5686, issued by the Department of Defense’s Electrical Devices Division, with performance located in Tracy, California, and a response deadline of August 13, 2026. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, with the vendor required to be a certified third-party assessment organization. Covered defense information applies, and technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Export control restrictions are in place, as the product contains technical data subject to ITAR or EAR, requiring prior authorization for any export, including disclosure to foreign persons within the U.S. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD training, and DLA approval may access the controlled data, in accordance with DFARS 252.225-7048. Packaging must comply with DLA standards, and the NAICS code is 334512 for electronic component manufacturing.
ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334512
New
DIBBS
Supply of Pressure Transmitters (NSN: 6685013158618)The contract solicits the supply of five military-specification pressure transmitters identified by NSN 6685013158618, ensuring full compliance with defense standards for performance, durability, and environmental resilience. All units must be packaged and labeled in accordance with Department of Defense requirements to facilitate seamless receipt and distribution by the Defense Logistics Agency. The procurement is set aside exclusively for Women-Owned Small Businesses, with the NAICS code 334512 indicating the industry classification for instrumentation manufacturing. Performance of the contract is designated for the delivery location at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 31, 2026, and bids are due by August 5, 2026, with the contract structured as a subcontract under the Army Sustainment Command's Supplier Operations OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSUR
Solicitation # SPE4A5-25-T-785M
The contract involves the procurement of five units of the NSN 6685013158618 Transmitter, Pressure, which is designated for delivery to the DLA Distribution at W1A8 within 171 days after award. The procurement is set aside exclusively for Women-Owned Small Businesses (WOSB) under NAICS code 334512, emphasizing opportunities for eligible small business vendors. The solicitation is issued as a Request for Quotation (RFQ), accessible electronically through the provided link, with no hard copies or detailed specifications, plans, or drawings available. All responsible sources are encouraged to submit quotes by the deadline of October 1, 2025, and submissions must be made electronically. The contracting agency is DLA Aviation, part of the Department of Defense, based in Richmond, Virginia. Questions regarding the solicitation should be directed via email to the designated point of contact, with further details available through the official DIBBS website. The contract emphasizes timely response and compliance with the set-aside criteria, ensuring that qualified small businesses, particularly women-owned, have the opportunity to participate in fulfilling this procurement requirement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334512
New
DIBBS
Precision Meter Assembly ManufacturingThe contract pertains to the manufacture and calibration of a military-specification meter assembly identified by NSN 6685010804582, requiring strict adherence to defense-grade quality and marking standards. Delivery is specified under FOB origin terms, meaning the vendor assumes responsibility for the product until it is loaded onto the carrier at the point of origin. The solicitation is structured as a subcontract with a Total Small Business Set-Aside designation under FAR 19.5, ensuring that only small business concerns are eligible to compete. The North American Industry Classification System code 334512 identifies the relevant industry as instrumentation manufacturing, aligning with the technical nature of the meter assembly. Performance of the contract is designated for Hill AFB with a ZIP code of 84056-5734, indicating where the finished product must ultimately be delivered or used. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, providing participating vendors a limited window to submit proposals. The contracting activity falls under the ASC Commodities Division of the Department of Defense, underscoring the operational and logistical importance of the component within military systems. No point of contact is listed in the data, and the full details can be accessed via the provided DIBBS portal link for submission and additional specifications.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 334512
New
DIBBS
Manufacturing of Thermostatic Switch (MIL-DTL-12285/2J Compliant)The contract calls for the manufacture of ten units of a thermostatic switch identified by part number M12285/2-7 and NSN 5930002247218, required to fully comply with the military specifications MIL-DTL-12285/2J and MIL-DTL-12285H. These specifications govern the design, performance, environmental resilience, and safety standards, ensuring the switches operate reliably under demanding operational conditions. All units must meet rigorous military-grade requirements for temperature control, durability, and electrical integrity, with strict adherence to quality assurance protocols throughout production. The solicitation is structured as a subcontract under the NAICS code 334512, which categorizes it within the manufacturing of other electrical equipment and components. The performance location is designated as Anniston, Alabama, with a zip code of 36201-4199, indicating the physical delivery and potentially the manufacturing site. The opportunity was posted on July 30, 2026, with a response deadline of August 10, 2026, leaving a limited window for interested parties to submit proposals. The contracting activity is隶属于 the Department of Defense through its Electrical Devices Division, underscoring the critical nature of the component for defense-related systems.
ELECTRICAL DEVICES DIV

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
Thermostatic Switch Manufacturing and AssemblyThe contract involves the full manufacturing, assembly, and quality assurance of thermostatic switches that must meet DLA Master List compliance standards, ensuring the products adhere to rigorous military specifications for reliability and performance. All work is to be performed at the designated place of performance in Tracy, California, with the zip code 95304-5000, and the project falls under NAICS code 334512, which categorizes it within the manufacturing of electrical equipment and components. The contract is structured as a subcontract and was posted on July 30, 2026, with a response deadline of August 10, 2026, indicating a tight timeline for bidders to submit proposals. The contracting entity is the Electrical Devices Division under the Department of Defense, emphasizing the critical nature of the switches for defense-related applications, where precision and compliance are non-negotiable.
ELECTRICAL DEVICES DIV

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
No distinct subcontract or supplier opportunities identifiedThis contract is a nominal-value supply transaction under the Department of Defense’s ASC Commodities Division, with no defined scope of work, deliverables, or detailed technical requirements beyond a single CLIN. The absence of substantive specifications renders subcontracting or supplier breakdown unfeasible, as there is insufficient information to allocate tasks or estimate responsibilities. The opportunity is posted under NAICS code 334512, indicating a focus on navigational, measuring, electromedical, and control instruments manufacturing, though no specific product or service is identified. It is solicited with a response deadline of August 7, 2026, and performance is expected to occur in San Diego, California, with no set-aside classification or point of contact provided. The transaction is classified as a subcontract, but due to its minimal value and lack of detail, it does not present viable opportunities for supplier engagement or competitive bidding beyond basic supply of unspecified items.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 334512
New
DIBBS
Commercial-Off-The-Shelf (COTS) Pressure Gage SupplierThe contract seeks the supply of five units of a standard dial pressure gauge identified by NSN 6685016133604, specifically requiring compliance with military specifications, appropriate packaging standards, and stringent cybersecurity protocols for handling Covered Defense Information. The equipment must be delivered as a Commercial-Off-The-Shelf (COTS) product, ensuring readiness for immediate integration into defense systems without custom modification. The performance location is designated as New Cumberland, Pennsylvania, with the end user being the Department of Defense through the ASC Supplier Oper OEM Division. All vendors must meet rigorous defense procurement standards, including data protection and supply chain integrity, to safeguard sensitive information throughout delivery and installation. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and is structured as a subcontract under NAICS code 334512, which classifies it within the Instrument and Unit Manufacturing sector. While no set-aside designation is specified, the requirement remains open to all qualified suppliers capable of fulfilling the technical, security, and logistical conditions outlined. The procurement is managed through the DLA’s DIBBS platform, and responders are expected to align their submissions with federal defense acquisition regulations, ensuring full traceability, compliance, and certification of the equipment’s suitability for military use. Delays or noncompliance with cybersecurity mandates will disqualify proposals regardless of technical or cost advantages.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-5652
This contract pertains to the procurement of a thermostatic switch identified by NSN 5930002247218 and part number M12285/2-7, governed by the military specification MIL-DTL-12285/2J and MIL-DTL-12285H, both dated March 17, 2021. The item is classified as a critical application component and must comply strictly with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards unless otherwise amended. The use of ozone-depleting substances is strictly prohibited in any phase of design, manufacturing, or testing unless explicit written approval is obtained from the contracting officer, and mercury or mercury-containing compounds are likewise banned except in specified functional applications such as batteries, fluorescent lamps, sensors, and weapons systems, with additional containment requirements for portable devices. Packaging must adhere to DLA’s RP001 requirements, MIL-STD-129 labeling, and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with palletization following DLA guidelines. The item must be delivered in full quantity of 10 units, with no variance allowed, FOB origin, and inspected and accepted at destination. Delivery is due within 335 days from contract award, with a required ship date of July 12, 2027, and all packaging and shipment must comply with DLA procedural notes C19 and C20. The delivery point is DLA Distribution Anniston, Alabama, and the contract is issued under solicitation SPE7M8-26-T-5652, with technical compliance and quality assurance controlled by the DLA, under the authority of the Department of Defense, Electrical Devices Division.
ELECTRICAL DEVICES DIV

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-T-316Y
This contract specifies the procurement of three dial pressure gages, model Ashcroft Inc 049X3 with part number EA24-3PYP-LBBO, identified by NSN 6685-01-675-0717, to be delivered FOB origin within 194 days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition type. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with attributes classified under defined verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited in all hardware, packaging, preservation, and marking, with limited exceptions for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified reagents; such exceptions require shock-proof design and secondary containment per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking applied. The gages are to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a firm delivery date of February 18, 2027, and no quantity variance permitted. The unit of issue is each (EA), and transportation and shipping instructions follow DLA procedural notices C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 334512
New
DIBBS
THERMOSTAT, FLOW CONTRO
Solicitation # SPE4A5-26-T-315C
The contract is for a single unit of a Thermostat, Flow Control, identified by NSN 6685-00-981-5114 and part number 26020011, supplied by RTX Corporation and Hamilton Sundstrand Corporation. It is designated as a critical application item with zero tolerance for quantity variance, and delivery is required within 536 days from the contract award, with an original ship date of January 26, 2028. Delivery is FOB origin and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements RP001, with hazardous materials conforming to TQ requirement IP025 per FED-STD-313. Sampling is governed by MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero nonconformances are required in sampling unless otherwise specified. Documentation for source approval is required under RC001, and all physical items must be marked in accordance with RQ017. The unit of issue is EA, with a total contract value of one unit at a unit price of $1.00. Delivery must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, following specified transportation guidelines and procurement notes.
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 334512
New
DIBBS
REGULATOR, TEMPERATU
Solicitation # SPE4A6-26-T-10ZX
The contract pertains to the procurement of a temperature regulator with part number 4129AS0149 and 4129AS0149-1, supplied by Hydraulics International, Inc., under NSN 6685016723581, for a total quantity of 18 units. Delivery is required within 146 days, FOB origin, with the destination being DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The unit price is $18.00 per unit, with no variance allowed in quantity. Inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and containment requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA packaging requirements. Sampling and quality verification rely on MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. The contract was issued under solicitation SPE4A6-26-T-10ZX, with a response deadline of August 7, 2026, and a posted date of July 30, 2026, under NAICS code 334512. The point of contact is John Schaefer at DLA.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A0-26-T-4128
The item is a TERMINAL, LUG with NSN/Part Number 5940-01-184-9276, for a quantity of 20 units, under Purchase Request 7017639108, with delivery required within five days of award. The solicitation number is SPE4A0-26-T-4128, posted on August 2, 2026, with responses due by August 10, 2026. This procurement falls under NAICS code 335931 and is managed by the Department of Defense through the Aviation Supply Chain ESOC Buys office. The point of contact is Danita Davis, reachable via email and phone provided. Technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—including foreign nationals in the U.S.—requires prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling and protection of this information, and compliance is mandatory for all offerors.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A0-26-T-4140
The contract specifies the procurement of one spacer sleeve with NSN 5365-01-575-6974 and part number 23-11709-075 for Daimler Truck North America LLC, under solicitation SPE4A0-26-T-4140. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. The item must be packed and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, adhering to DLA’s packaging requirements, including preservative methods and unit container specifications. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise stated, with attributes assigned verification levels or AQLs based on criticality. All packaging and marking must be consistent with the referenced standards and the specified packaging code U, excluding any special marking. The shipment must be delivered to the designated government location in Slidell, Louisiana, using traceable freight methods—parcel post is prohibited—and is tied to a RDD/NCMS shipment with unique identifiers including the military freight designation and project code TP 1. The unit is to be shipped in accordance with DLA’s authorized unit of issue, and the contracting officer’s point of contact is Danita Davis. The contract incorporates technical and quality requirements from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. The required delivery date is July 29, 2026, and the solicitation closes on August 10, 2026, with the item falling under NAICS code 332999 for other fabricated metal product manufacturing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIVET
Solicitation # SPE4A0-26-T-4129
The contract specifies the procurement of 10 plain blind rivet nuts with the NSN 5310-00-934-0222, supplied in cadmium-plated steel, to be delivered within five days of award. All items must comply with stringent quality and identification standards, including MIL-STD-130N for military property marking and adherence to DLA packaging requirements. The contract mandates compliance with specific Contract Data Requirements Lists such as DD Form 1423s and CDRLs related to quality certification, removal of government identification from non-accepted supplies, and physical identification of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality conformance inspections are required, and the manufacturer may elect attribute or variable inspection methods under MIL-STD-1916. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE4A0-26-T-4129, posted August 2, 2026, with a response deadline of August 10, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESoC Buys.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A0-26-T-4130
The contract specifies the procurement of one sleeve bearing with NSN 3120-01-239-1371 and part number 0101-0363, sourced exclusively from Cummins Power Generation Inc. (CAGE 44940), designated as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards unless otherwise contractually modified. The item must comply with stringent packaging specifications per MIL-STD-129 and ASTM D3951, with palletization adhering to DLA Packaging Requirements for Procurement. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, instruments, or chemical reagents specified by NAVSEA, and any permitted mercury-containing portable devices must feature shockproof construction and secondary containment. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and attributes are assigned specific verification levels or AQLs. Delivery is mandated within five days of contract award under FOB Origin terms, with inspection and acceptance occurring at the destination. Shipping must be traceable and exclude parcel post, using the designated RDD and NMCS codes. The delivery point is Fort Eustis, VA, identified by the W26RK4 routing code and W6YN ship-to address. The contract enforces precise marking of all packages and the bare item in compliance with RQ017, and government identification must be removed from non-accepted supplies as per RQ011. Unit of issue is each (EA), with no variance allowed in quantity. The required delivery date is July 27, 2026, and the item is subject to all applicable DLA Master List requirements, including those for measuring and test equipment (RT001), tailored quality provisions (RQ001), and covered defense information (RD003). The point of contact for inquiries is Danita Davis, with the solicitation open for response until August 10, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-26-T-4145
The contract requires the delivery of one machine screw identified by NSN 5305-01-441-9376 and part number 23-12195-075, with a strict delivery deadline of five days from contract award. All items must meet stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based plans, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in inspection unless explicitly waived. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific codes for protection, wrapping, and containment, and palletization must adhere to DLA packaging requirements. The item must be shipped FOB origin with no quantity variance allowed, inspected and accepted at origin, and transported via traceable means excluding parcel post. The delivery address and mark for location are identical, located at 1539 Beecher Anderson Road, Lenoir NC 28645-0000, with special shipping identifiers and government-only codes applied. The required delivery date is July 28, 2026, and the contract is issued under solicitation SPE4A0-26-T-4145 by the Department of Defense through the Aviation Supply Chain ESOC Buys office, with Danita Davis as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336415
New
DIBBS
F00T, EJECTOR, FW
Solicitation # SPE4A0-26-T-4133
The contract pertains to the procurement of a Forward Ejector Foot, designated Part Number 68A733218-1007 with NSN 1440-01-453-4234, under solicitation SPE4A0-26-T-4133. Eight units are required at a unit price of $8.00, with delivery mandated within five days FOB origin. The item must be manufactured using a forging process, necessitating specific tooling and sourcing coordination through designated DLA supply chain teams for Aviation or Land & Maritime systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization adhering to DLA packaging standards. Acceptance occurs at origin with zero tolerance for non-conformances under sampling rules aligned with MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. ISO 9001:2015 quality management certification is required for both manufacturers and non-manufacturers, and government identification must be removed from non-accepted supplies. Unit of issue is EA, and Item Unique Identification is not mandated per customer request under DFARS 252.211-7003. All measurements and testing equipment must meet applicable standards, and the contract is administered by the DLA Aviation Supply Chain ESOC Buy office with Danita Davis as the primary point of contact.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A0-26-T-4144
The contract specifies the procurement of one hexagon cap screw, part number 5305-99-352-5546, manufactured by J.C. Bamford Excavators Limited under part number 1305/1908Z, with a delivery requirement of five days from the contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must align with the revision in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization per RP001. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with assigned verification levels or AQLs for defined attributes, and acceptance requires zero non-conformances unless otherwise specified. The item is delivered FOB origin, inspected and accepted at destination, with no qty variance permitted. Transportation details reference DLAD PROC NOTES C19 and C20, and the shipment is designated as RDD/NCMS. The delivery address and markfor location are both the Prince Sultan Air Base in Saudi Arabia, with the contract identifying a need ship date of July 27, 2026, and a response deadline of August 10, 2026. The item has no shelf life, is issued in eaches, and is procured under a federal solicitation managed by the Department of Defense’s Aviation Supply Chain Esoc Buys office.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, ROD E
Solicitation # SPE4A0-26-T-4137
The contract is for the procurement of one plain rod bearing, part number 3120-01-553-8346, under solicitation SPE4A0-26-T-4137, with delivery required within five days FOB origin. The item is designated as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, including specific preservation methods tailored to bearing type and closure, selection of protective lubricants per established tables, and adherence to quality assurance verification protocols. Inspection and acceptance occur at destination with zero tolerance for non-conformances under sampling plans defined by MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. The contractor must provide documentation for source approval and ensure physical marking per RQ017, with all units individually identified per approved part numbers from approved suppliers including Appleton Marine Inc and JARP Industries, Inc. The unit of issue is each, with no variance allowed in quantity, and special packaging codes and markings must be applied as required under the contract's special packaging clause.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A0-26-T-4138
The contract mandates the procurement of 40 socket head cap screws identified by NSN 5305-01-569-2732 under solicitation SPE4A0-26-T-4138, with delivery required within five days of award. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific packaging, identification, and cybersecurity protocols. The screws must adhere to MIL-STD-130N for identification marking and be inspected per System 22 of FED-STD-H28/20 for dimensional conformance on all Class 3A and 3B threads, excluding specified small internal or external threads. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes not explicitly defined are treated as major with verification levels VII, IV, and II. Cybersecurity requirements mandate either a CMMC Level 2 Self-Assessment or certification by a C3PAO. The drawing specifications are accessible only during open solicitation via the DIBBS portal, and the product is subject to removal of government identification if rejected. The contract is fully competitive under federal procurement rules, with primary point of contact Danita Davis at the Department of Defense’s Aviation Supply Chain ESOC Buys, and performance location set at Newport News, VA 23607-2734.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A0-26-T-4134
The contract pertains to the procurement of one unit of a cable assembly identified by part number 4027AS1810-02 and NSN 5995016955919, issued under solicitation SPE4A0-26-T-4134 for the Department of Defense. Delivery is required within five days of contract award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with stringent technical and quality standards, including MIL-STD-2073-1E packaging, MIL-STD-129 marking without special codes, and DLA packaging requirements. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned the highest verification level. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and the item is subject to covered defense information protocols. The assembly must be shipped via traceable means, excluding parcel post, to the Naval Air Station North Island delivery address in San Diego, California, with a required delivery date of July 27, 2026. The contract specifies government-only identifiers and references the DLA Master List of Technical and Quality Requirements for all incorporated R and I numbered provisions.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A0-26-T-4135
The contract specifies the procurement of 2 units of SCREW, CAP, HEXAGON HEAD with NSN 5305014784696 and purchase request 7017660241, to be delivered within five days FOB origin with no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any general standards such as ASTM D3951, and packaging must adhere strictly to MIL-STD-129 and DLA Packaging Requirements, including proper marking and labeling. Sampling procedures require zero non-conformances using MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the bare item must follow RQ017 guidelines, and all shipments must be traceable via freight methods—not parcel post—to the specified DLA delivery point at Camp Lejeune, NC. The required delivery date is July 30, 2026, with inspection and acceptance occurring at destination. The contract is under solicitation SPE4A0-26-T-4135, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys, with point of contact Danita Davis for inquiries.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A0-26-T-4139
This contract pertains to the procurement of one aircraft skin part identified by NSN 1560-01-581-7469 and part number 70203-52501-151, sourced from Sikorsky Aircraft Corporation under solicitation SPE4A0-26-T-4139. The requirement mandates strict adherence to Department of Defense packaging standards, specifically MIL-STD-2073-1E, which prohibits the use of commercial or bulk packaging methods such as ASTM D3951. Packaging must include full corner and edge protection with fiberboard or better top and bottom coverage, and all items must be marked per MIL-STD-129 with the special fragile code 01-01. The item must be delivered FOB origin within five days of contract award, with zero tolerance for quantity variance. Cybersecurity requirements mandate CMMC Level 2 self-assessment compliance, and the contractor must follow DLA packaging guidelines and the removal of government identification from non-accepted supplies. Sampling is governed by Sikorsky’s approved alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Inspection and acceptance occur at the destination, with shipment directed to Fort Irwin, California via traceable freight methods—parcel post is prohibited. The delivery is designated for government use only, with the designated point of contact being Danita Davis of DLA, and the original required delivery date is July 24, 2026. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List as of the solicitation issue date.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details