Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GAGE, PRESSURE, DIAL

Active
SPE4A7-26-T-587MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a dial indicating pressure gage identified by part number SG4ND1HPWRANAG and NSN 6685012983789, with a quantity of 61 units to be delivered FOB origin within 315 days. The item is classified as a commercial item and is designated as a critical application item, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date. Manufacturing and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 05 for delicate instrument handling, and palletization in accordance with DLA packaging guidelines. Unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at origin. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the item or its components, with exceptions permitted only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and attributes are to be verified at predefined levels. Physical identification of the bare item must meet RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. The contract includes a CDRL, and all technical data must conform to referenced specifications including MIL-G-18997E and DI-DRPR-80651. The solicitation is a total small business set-aside under NAICS code 334519, with point of contact information provided for inquiries.

General Info

Procure 61 pressure gauges FOB origin, comply with military standards, no mercury except approved uses, zero defects required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lacresha Ellis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GAGE,PRESSURE,DIAL
GAGE, PRESSURE, DIAL INDICATING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SPE4A7-26-T-587M
SECTION B
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Contract Data Requirements List (CDRL) Applies, See Technical Data Package
P/N: SG4ND1HPWRANAG
IDENTIFY TO:
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-G-18997E(2) NOT 1 REVISION NR E DTD 02/26/2021 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK DI-DRPR-80651 NOT 2 REVISION NR DTD 03/15/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486304 0001 EA 61.000
NSN/MATERIAL:6685012983789
DELIVERY (IN DAYS):0315
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E9 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:05 -05 Delicate instrument
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE4A7-26-T-587M
SECTION B
PR: 7017486304 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
FOR ADDITIONAL PACKAGING NSN/Part Number: 6685-01-298-3789 Quantity: 61 EA Purchase Request: 7017486304QTY: 61 Delivery: 315 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
HYDROMETER, GRADUATEThe contract specifies the procurement of one each of a graduated hydrometer with an integrated thermometer for measuring liquid temperature, featuring a specific gravity range of 39 to 51, manufactured from soda lime glass with 0.1 increments, and compliant with ASTM specification 6H. The device is lead and mercury free and meets NIST certification standards. Packaging must adhere to DLA requirements and the Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with medical marking standards and government identification must be removed from non-accepted supplies. The solicitation number is SPE2DH-26-T-5363, with a response deadline of July 28, 2026, and delivery required within 20 days after award. The product is identified by NSN 6630-01-687-6909 under a federal procurement managed by the Department of Defense's Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, and the solicitation may involve covered defense information.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
PRODUCTION LOT TESTINGThis contract pertains to the procurement of a PUSH SWITCH designated as NSN 5930-01-327-0031, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). The item must be sourced exclusively from an approved supplier as determined by the Naval Air Warfare Center Aircraft Division at Lakehurst, with Offerors required to provide documentation proving source approval, such as a letter from NAVICP’s Engineering and Product Support Directorate. Serialization and full traceability are mandatory for every unit and its packaging, including scrappage records, and any attempt to rebrand or obscure original OEM markings is strictly prohibited. The item must comply with stringent technical and quality standards referenced from the DLA Master List, including SAE AS9100 for quality management, and must be marked per MIL-STD-129 with specific identifiers including contract number, NAWC CAGE code, part number, lot number, and manufacturer CAGE code. No ozone-depleting chemicals may be used, and mercury or mercury compounds are banned unless explicitly exempted for functional components such as batteries or sensors, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs, and non-conformances must result in zero acceptance unless contractually altered. The contractor must submit Production Lot Test reports, a Production Test and Inspection Report, and a Certificate of Quality Compliance; the Certificate of Conformance clause is not permitted. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, marked with special codes and palletized appropriately, with all items delivered FOB origin and inspected and accepted at origin. Delivery is scheduled for 338 days after contract award, with a firm fixed price and no quantity variance allowed. The item is part of a total small business set-aside, and all documentation referencing technical data, quality assurance provisions, and engineering drawings must be current and authoritative, with source-controlled drawings dictating marking and configuration requirements even if other sources are listed.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, PRESSUREThe contract is for a single pressure transducer, part number 47045921AB and NSN 6695145479509, sourced under a total small business set-aside solicitation issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days of contract award, with FOB origin terms and final inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging must strictly adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The product is designated a critical application item and requires compliance with CMMC Level 2 self-assessment, while sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified in the contract. The unit of issue is each, with a fixed quantity of one unit and no variance permitted. The contract is under solicitation SPE4A5-26-T-302N, issued on July 21, 2026, with responses due by July 29, 2026, and the original required delivery date is set for May 2, 2027. The transducer must be shipped to the designated DLA distribution center, with transportation instructions governed by DLAD Proc Note C19 and C20. The supplier must ensure all labeling, marking, and documentation comply with federal procurement standards, including the use of the correct ANSI X12 unit of issue, and must maintain cybersecurity compliance through the CMMC Level 2 self-assessment. All performance and quality obligations are binding and non-negotiable, with the DLA Master List controlling over any general industry standards, and the contract mandates that government identification be removed from rejected items prior to return.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
TESTER, MATERIAL STRENGThe contract pertains to the procurement of one unit of a material strength tester identified by NSN 6635-00-755-4767 and part number 36-0690/02, sourced from ELE INTERNATIONAL LLC DBA SOILTEST. Delivery is required within 10 days to Fort Hood, Texas, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E and marking governed by MIL-STD-129, including palletization per DLA packaging requirements. The item is not required to be uniquely identified, and no special marking is needed. Sampling for quality verification follows MIL-STD-1916 or an equivalent zero-based plan, with unspecified attributes treated as major and acceptance criteria demanding zero non-conformances unless otherwise stated. Technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The shipment must be sent via fast, traceable means, excluding parcel post, and is directed to a specific tactical area facility under a RDD/ANMCS shipment designation. The contract was issued under solicitation SPE4A6-26-T-08RB with a required delivery date of July 15, 2026, and is managed by the Department of Defense’s ASC Commodity Division.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTORThe contract is for a starter motor identified by NSN 6110-01-196-6385, with a quantity of four units, under purchase request 7017527755. The solicitation number is SPE7M2-26-T-5701, posted on July 21, 2026, with responses due by August 3, 2026, and delivery is required 451 days after order. The item falls under NAICS code 334519 and is procured by the Department of Defense through the Nuclear Reactor Program. Performance is to occur in New Cumberland, Pennsylvania, zip code 17070-5002, with Alisha Blanton as the primary point of contact. Critical to this contract is the export control classification of the associated technical data, which is subject to either ITAR or EAR regulations. Disclosure of this data to foreign persons, including foreign nationals within the United States or overseas, is restricted without prior authorization from the Department of State or Commerce. Only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and approved access through the DLA authority may receive this technical data. DFARS 252.225-7048 governs compliance with these restrictions.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTORThis contract specifies the procurement of one starter motor with NSN 6110-01-366-9638 under solicitation SPE7M0-26-T-014W, requiring delivery within five days of contract award to FPO AE 09588 aboard the USS TORTUGA LSD 46. The item must be furnished FOB origin with no variation in quantity allowed, inspected and accepted at destination per MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied. Packaging must comply with DLA’s procurement requirements, and shipment must be conducted via traceable means excluding parcel post, in accordance with DLA procedural notes C19 and C20. Sampling inspections must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and attributes are classified with verification levels or AQLs per defined standards. The supply must be free of intentional mercury or mercury compounds except in specific exempted applications like batteries, fluorescent lamps, or naval-specified instruments, with portable mercury-containing devices requiring dual containment as per NAVSEA 5100-003D. Technical and quality requirements are incorporated by reference from the DLA Master List, and the solicitation closes on August 3, 2026, with an original required delivery date of July 22, 2026. The point of contact for inquiries is Laurie Wassmuth of the Department of Defense, Maritime Supply Chain ESOC Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
LAMP ASSEMBLYThe contract mandates the supply of 15 lamp assemblies with part number 220-419877-000 and NSN 6240012085912, classified as a critical application item, under solicitation SPE4A6-26-T-08LQ. Delivery is required within 171 days from the contract award date, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination in Phoenix, Arizona, where the item must be delivered to Arizona Industries for the Blind. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container codes, and marking must adhere to MIL-STD-129 with a special fragile designation. Palletization must meet DLA procurement packaging requirements, and the item must be shipped to the parcel post address provided, with transportation logistics governed by DLA procedural notes C19 and C20. Quality control is strictly defined by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise stated. Zero non-conformances are required in the sampled lot unless contract terms permit otherwise, and the manufacturer may use either attribute or variable inspection under MIL-STD-1916. Documentation for source approval must satisfy RC001, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on acquisition size. The item is subject to covered defense information guidelines, and government identification must be removed from non-accepted supplies per RQ011.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONALThe contract is for the procurement of a transducer, motional, identified by NSN 6695016339924 and part number 025-40106-005 from Johnson Controls Navy Systems, LLC, with an alternate part number 742CF0300DXDALS from AMETEK, Inc. A total of five units are required at a unit price of $5.00, for a total contract value of $25.00, with delivery scheduled 171 days after award under the solicitation SPE4A5-26-T-298U. All items must be delivered FOB origin and inspected and accepted at the destination, with no tolerance for quantity variance. Packaging must comply strictly with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, cushioning, and containerization, along with labeling per MIL-STD-129 featuring the special marking code 06 for delicate instruments and an upward arrow. The item is classified as a critical application item and is subject to DLA’s master list of technical and quality requirements referenced by R and I numbers. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and the contractor must adhere to regulations for the removal of government identification from non-accepted supplies. Delivery is mandated to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 17, 2027, though the original delivery deadline is March 1, 2027. The contract falls under the NAICS code 334519 and is issued by the Department of Defense’s ASC Supplier Oper OEM Division, with Marcus Williams as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
SWITCH, LIQUID LEVEL
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC SupportThe contract seeks subcontractor support to achieve and maintain cybersecurity compliance with NIST SP 800-171 standards and prepare for CMMC certification, specifically for entities handling controlled unclassified information. Services include developing and maintaining comprehensive System Security Plans, implementing required security controls, and completing SPRS attestation to demonstrate compliance posture. All activities must align with Department of Defense requirements and are targeted at ensuring readiness for third-party audits and contractual obligations under CMMC frameworks. The work is to be performed in support of the ASC SUPPLIER OPER AE AND AF DIV under the broader DoD acquisition structure. This subcontract opportunity is open for response until August 20, 2026, and is classified under NAICS code 541512 for computer systems design services. There is no set-aside designation specified, and performance location details are not provided, but the work is expected to support DoD supply chain security initiatives. Interested parties must navigate the DIBBS platform via the provided link to access full solicitation details and submit proposals ahead of the deadline. The contractor is expected to deliver documented, auditable processes and artifacts that validate ongoing compliance and readiness for CMMC level assessment.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation & Marking ServicesThe contract seeks subcontractor services for the military-compliant packaging, preservation, and labeling of viewer mounts in accordance with MIL-STD-129, MIL-STD-2073-1, and DLA RP001 standards, ensuring all requirements for defense logistics and shipment readiness are met. The work must adhere strictly to federal military specifications governing labeling, containerization, corrosion prevention, and documentation to support secure and traceable delivery across the defense supply chain. The solicitation is issued under NAICS code 493190 for other warehousing and storage and is classified as a subcontract, with a response deadline of August 20, 2026. The contracting activity originates from the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with performance expected to align with DoD logistics protocols. All submissions must comply with the technical and procedural mandates of the referenced military standards and be submitted via the DIBBS portal by the specified deadline.
Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & First Article Testing (FAT) ServicesThe contract seeks independent verification and documentation of First Article Testing compliance to ensure that production processes and initial samples meet specified technical and quality requirements. This includes comprehensive inspection planning, execution of sample testing according to approved procedures, and the generation of a formal First Article Test report that validates conformance to contract specifications. The work is critical for validating manufacturing readiness and ensuring consistency before full-scale production begins, with all activities requiring strict adherence to established quality assurance protocols. This is a subcontract under the NAICS code 541330, relating to engineering services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is open for responses until August 20, 2026, and performance will be carried out in alignment with defense-specific quality standards. While no specific location or set-aside details are provided, the nature of the work indicates a focus on supply chain assurance for defense-related components, requiring qualified vendors with demonstrated expertise in aerospace or defense manufacturing compliance and formal reporting processes.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
DIBBS
Precision Machining of Viewer Mount ComponentsThe contract involves the manufacture of precision-turned metal components for a military viewer mount, requiring advanced CNC machining, surface finishing, and rigorous quality inspection adhering to MIL-STD-810G environmental testing standards and First Article Testing protocols. All work must meet exacting military specifications for durability, dimensional accuracy, and performance under extreme operational conditions. The subcontract is classified under NAICS code 332994 and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by August 20, 2026. The components are intended for critical defense applications where reliability and compliance are non-negotiable, and all produced parts must undergo documented inspection and certification before delivery.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 334290
New
DIBBS
COVER, ELECTRONIC COMMUThis contract is for the procurement of a cover for electronic communication equipment, identified by NSN 5895012703108 and part number 13075913-019, with a quantity of 10 units. The item is classified as a Critical Application Item and must comply with strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers in the document. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the Contracting Officer, though this restriction does not apply to commercial items or part-numbered-only components. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, wrapping, and unit containment, and all markings must follow MIL-STD-129 without special marking codes. The product must be palletized according to DLA packaging requirements and delivered FOB origin to the designated delivery point at the DLA Distribution New Cumberland Facility in Pennsylvania. Delivery is required within 171 days from the contract date, with an original required delivery date of November 28, 2026, and a needed ship date of January 17, 2027. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances during sampling, which must follow MIL-STD-1916 or a comparable zero-based sampling plan. Attributes are assigned verification levels and AQLs as specified, with unspecified attributes treated as major. The contract enforces strict configuration change management and prohibits deviations without formal engineering change proposals or variance requests. The unit of issue is each, with no permitted quantity variance. Transportation and shipping details are governed by DLA procedural notes, and all documentation references point to official DLA and DoD systems for compliance. The solicitation number is SPE4A7-26-T-587A, with a response deadline of July 29, 2026, and the contracting officer is Tamera Greene of the Department of Defense.
Other Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PARTICLE SEPARATOR,The Contract involves the procurement of a single unit of a Particle Separator with NSN 1680-01-524-7206 under solicitation SPE4A7-26-T-584W, with a delivery deadline 171 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The supplier must comply with DLA packaging standards, tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and inspection and acceptance at origin. The item is exempt from Item Unique Identification per the Service customer’s request, and government identification must be removed from non-accepted supplies. Export control applies to associated technical data under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization, including to foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Covered defense information applies, and all documentation requirements for source approval requests must be met. The performance location is Jacksonville, FL, with inquiries directed to NYA Currie at the provided DLA contact details.
Textile Bag and Canvas Mills

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUGThe contract is for 556 units of the terminal lug part number PV10-8R-L manufactured by PANDUIT CORP. with CAGE code 06383, identified by NSN 5940-01-668-4714, under solicitation SPE4A7-26-T-586T. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified; critical, major, and minor attributes must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The product must be packaged in accordance with ASTM D3951 but subordinate to DLA’s stricter packaging rules, and all packaging must be marked and labeled per MIL-STD-129. Palletization must meet DLA’s RP001 packaging requirements, and the unit of issue is each (EA) with no tolerance for quantity variance. Delivery is FOB origin with an accepted delivery offset of 171 days, and the original required delivery date is February 17, 2027. All items are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with specific parcel post and freight shipping addresses provided. Inspection and acceptance occur at destination, and transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contract was solicited on July 21, 2026, with proposals due by July 29, 2026, under NAICS code 335931 for electrical equipment manufacturing.
Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, SIGNAL DAThe contract pertains to the procurement of seven units of a Converter, Signal DA, with the NSN 5895-01-615-3408, under solicitation SPE4A7-26-T-585J, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is a total small business set-aside under NAICS code 334511, with responses due by July 29, 2026, and delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions applied based on the acquisition type and revision dates in effect. The item involves controlled technical data subject to ITAR or EAR export regulations, prohibiting unauthorized disclosure or transfer to foreign persons, including foreign nationals in the U.S., and requiring compliance with DFARS 252.225-7048. Contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and be formally approved by DLA to access such data. Inspection and acceptance occur at the manufacturer’s origin, non-accepted supplies must have government identification removed, and additional tailored quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, PA, with Tamera Greene as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ARM, EMERGENCY ESCAPEThe contract pertains to the procurement of 20 units of an ARM, EMERGENCY ESCAPE item identified by NSN 1560-00-333-6710, with a delivery requirement of 171 days after award. Manufacturing must be accomplished via a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support must be directed to designated DLA supply chain teams based on application domain—Aviation or Land & Maritime. The item is subject to stringent quality standards under SAE AS9100, along with specific packaging requirements per RP001 and strict compliance for measuring and test equipment under RT001. Documentation for source approval must adhere to RC001, and physical identification and bare item marking must comply with RQ017. The technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior government authorization, and only DLA contractors with approved JCP certification, completed training, and DLA authorization may access the data. Cybersecurity compliance at CMMC Level 2 is required through a certified third-party assessment organization under RD005. The solicitation number is SPE4A7-26-T-584L, with a response deadline of July 29, 2026, and the performance location is Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at the Defense Logistics Agency.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for the procurement of two SPACER, RING units with NSN 5365-01-393-9408 under solicitation SPE4A7-26-T-587Y, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, physical identification and bare item marking, and adherence to tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must conform to DLA standards, and the item falls under the Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements for third-party assessors. Covered defense information applies, and the place of performance is documented as Bremerton, Washington, with Tamera Greene as the primary point of contact.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract pertains to the procurement of a spacer sleeve with part number 60-550-0247-1, supplied by Flowserve Corp under a Department of Defense solicitation numbered SPE4A7-26-T-586H. The item is classified as a critical application item and must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited in the material or its contact surfaces, except for specified functional uses such as batteries, fluorescent lamps, instrumentation, weapons systems, and chemical reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contract specifies a quantity of 15 units with no variance allowed, to be delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery must align with the original required date of November 4, 2027, and the need ship date of January 17, 2027. The NSN for the item is 5365-01-280-6923, and it is procured under a simplified acquisition process governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. All shipments must comply with DLA’s transportation procedures outlined in DLAD Proc Notes C19 and C20.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CYLINDER ASSEMBLY, AThe contract is for one cylinder assembly, actuating, linear, with part number 1FA10038-1 and NSN 1650-01-388-4903, sourced from Triumph Actuation Systems LLC, CAGE 26437. The item is classified as a critical application requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by RP001, and all markings and labeling must follow military specifications. Zero defect acceptance is mandated under MIL-Std-1916 or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No unit identification is required per customer request, and deviation or waiver requests must follow formal configuration change management procedures. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the single unit must be delivered within 171 days from the contract date to the specified receiving warehouse in Tracy, California. The original required delivery date is March 4, 2027, with a needed ship date of January 17, 2027. Pricing is fixed at $1.00 per unit, and no quantity variance is permitted. The solicitation number is SPE4A7-26-T-584S, issued under NAICS 336413, with contractual obligations binding to the DLA Master List revisions effective as of the solicitation issue date.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details