Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Gas Chromatograph/Coupled Plasma Optical Emission Spectrometer

Active
80NSSC26939493QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Shared Services Center, on behalf of the National Aeronautics and Space Administration, has issued a small business set-aside solicitation for a Gas Chromatograph/Coupled Plasma Optical Emission Spectrometer under solicitation number 80NSSC26939493Q. The solicitation is open to small businesses as defined by the Small Business Administration, with the North American Industry Classification System code 334516, and requires responses by August 7, 2026, at 8:00 PM Eastern Time. The contract will be performed at the Stennis Space Center in Mississippi, with primary point of contact McKenzie Hanson and secondary contact Shari Trigg available for inquiries via email. The equipment is intended to support critical scientific analytical needs within NASA’s operations, and all submissions must comply with the technical and procurement requirements detailed in the attached RFQ. Interested parties can access the full solicitation through the provided SAM.gov link.

General Info

Small business set-aside for GC/CP-OES equipment at Stennis Space Center, due August 7, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

MS, USA

Set-Aside

SBA

Documents

(1)

SATPC0041997+Tab+10+RFQ+Open+Market.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts2 people available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts
McKenzie Hanson

Full Description

Show more

See attached RFQ

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
Federal
6640--BRAND NAME OR EQUAL: 5-Year IDIQ - Disposable Individually Ventilated Caging System and Accessories for Rodents - Minneapolis VA Health Care System
Solicitation # 36C26326R0068
The Minneapolis VA Health Care System is soliciting a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract for a BRAND NAME OR EQUAL Disposable Individually Ventilated Caging System and Accessories for Rodents under the NAICS code 334516, with a small business size standard of 1,000 employees. This is an unrestricted, full and open competition issued as a Request for Quotation (RFQ) under FAR Subpart 12.202, treating the items as commercial products with streamlined acquisition procedures. The contract will be awarded under a Lowest Price Technically Acceptable (LPTA) process, where technical acceptability is determined first on a pass/fail basis, and the lowest-priced technically acceptable offer will be selected. Technical requirements include supplying four permanent racks for mice and two for rats, each with specified cage capacity and compatible supporting equipment such as blowers and filters, all designed to fit standard doorways without disassembly. Acceptable proposals must include proof of authorized distributor status, a narrative demonstrating substantive equivalence for “equal” items, a minimum one-year warranty, completed Trade Agreements Certificate, and active SAM registration, along with up to three relevant past performance references. The delivery location is Building 49 at One Veterans Drive, Minneapolis, MN 55417, with F.O.B. Destination terms, meaning risk transfers upon delivery. Performance is scheduled to begin August 12, 2026, and conclude by September 30, 2026, for initial deliveries, with the IDIQ structure allowing for multiple delivery orders over a five-year ordering period up to a ceiling of $1,000,000. Proposals must be submitted electronically by August 6, 2026, at 5:00 PM via email to Alisha Milander at Alisha.Milander@va.gov with the solicitation number in the subject line, and must be organized into two volumes: one for pricing using completed SF-1449 and Price Schedule, and one for technical compliance with supporting documentation. No attachments are listed separately, and packaging, marking, or MIL-STD requirements are not specified, consistent with commercial item acquisition flexibility. Contract administration is managed by Network Contracting Office 23 in Saint Paul, MN, with payments required to be made via Electronic Funds Transfer through SAM. Specific clauses include deviations for indefinite quantity, ordering, security prohibitions, DE
Network Contract Office 23 (36C263)

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334516
New
Federal
Metrology-grade Chilled Mirror Dew Point Hygrometers
Solicitation # 1333ND26QNB680396
The Department of Commerce, National Institute of Standards and Technology, is soliciting proposals for metrology-grade chilled mirror dew point hygrometers under solicitation number 1333ND26QNB680396. This combined procurement requires highly accurate instruments capable of measuring dew point with traceability to national standards, intended for use in calibration, research, and precision environmental monitoring applications. Proposals must demonstrate technical compliance with metrology-grade specifications, including performance benchmarks, traceability documentation, and calibration protocols aligned with NIST requirements. The contract will be awarded to a vendor capable of delivering equipment that ensures long-term stability, minimal drift, and rigorous repeatability under controlled laboratory conditions. The solicitation was posted on July 31, 2026, with a response deadline of August 11, 2026, at 3:00 PM Eastern Time. All responses must be submitted through the SAM.gov portal, and performance is expected to occur at the NIST facility in Gaithersburg, Maryland, 20899. The North American Industry Classification System code is 334516, indicating instruments and laboratory equipment manufacturing. The sole point of contact for inquiries is Forest Crumpler, reachable via email at forest.crumpler@nist.gov. There is no set-aside designation for this solicitation, meaning it is open to all eligible vendors regardless of business size or ownership status.
Department Of Commerce Nist

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334516
New
Federal
66--R10 RO: Toxic Vapor Analyzers
Solicitation # 68HE0726Q0038
The Environmental Protection Agency’s Region 7 Contracting Office is issuing a pre-solicitation notice for the procurement of Toxic Vapor Analyzers under solicitation number 68HE0726Q0038, with the NAICS code 334516. This notice is for informational purposes only and does not invite quotes or proposals; however, it provides advance awareness of an upcoming acquisition to ensure industry readiness. The requirement specifies the purchase of TVAs that must conform to detailed technical specifications outlined in the accompanying documentation, with the ultimate goal of equipping personnel for environmental monitoring and hazard response. The place of performance for this contract is Seattle, Washington, with delivery expected to support operational needs in that region. The pre-solicitation was posted on July 31, 2026, and the response deadline for any inquiries or feedback is August 14, 2026, at 6:00 p.m. Eastern Time. Primary point of contact for this effort is Brianna Biggs of the EPA, reachable via email at biggs.brianna@epa.gov or by phone at 913-551-7549. The contracting office is located in Lenexa, Kansas, and the acquisition is not reserved for any specific small business set-aside category. Contractors and vendors are encouraged to review all attached specifications carefully and prepare for the subsequent formal solicitation, though no submissions are to be made at this stage. Additional details and documentation can be accessed through the provided SAM.gov link.
Region 7 Contracting Office

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334516
New
Federal
Parachutist Oxygen Delivery System (PODS) Prototype
Solicitation # W91CRB-Parachutist-Oxygen-Delivery-System-(PODS)-Prototype
The Parachutist Oxygen Delivery System (PODS) Prototype solicitation is an Other Transaction Authority (OTA) presolicitation under 10 U.S.C. §4022, aimed at securing innovative prototype solutions from Non-Traditional Defense Contractors or small businesses for use by U.S. military parachutists. The system must deliver reliable, life-sustaining oxygen during descent and pre-breathing phases under extreme environmental conditions, including temperatures from -65°F to 140°F, 100% non-condensing humidity, and sand/dust exposure, while meeting strict performance thresholds such as 40 liters per minute pre-breath flow and 45-minute descent capability using a 400L integrated oxygen system. Vendors are required to submit white papers of no more than three pages detailing technological approach, Work Breakdown Structure, TRL level (minimum TRL 6), anticipated cost, and past performance, with formal proposals due by close of business August 3, 2026, via email to designated Army personnel. The project will progress through Developmental Testing (DT) and Operational Testing (OT) phases at Yuma Test Center and Fort Bragg, leading to a Production Readiness Review and full lifecycle sustainment planning, with key deliverables including 6 units for DT and up to 15 for OT, along with maintenance, logistics, quality, and technical manuals. No standard FAR or DFARS clauses apply due to OTA authority, but compliance with the Berry Amendment, Buy American Act, DOT/FAA transport regulations, and MIL-STD-810H environmental testing is mandatory. The award will be based on best value using a trade-off approach, prioritizing technical innovation, feasibility, and life cycle affordability over lowest price, with no formal pricing data requested at this stage—costs will be submitted only upon invitation to the full proposal phase. Offerors must confirm their size status under statutory pathways, including potential non-federal funding contribution, and certify NTDC status if applicable, while ensuring all proprietary information is clearly marked and no government classification markings are used. Performance is to occur primarily in Natick, Massachusetts, with testing and training conducted at multiple military sites, and all logistics deliverables must support military packaging, marking, and preservation standards without explicit details being provided.
W6QK Acc-Apg

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
USAFSAM/OEA Inductively Coupled Plasma Mass Spectrometer (ICP-MS)
Solicitation # IASS-AFRL-RMZB-2026-0041
The United States Air Force School of Aerospace Medicine requires two Inductively Coupled Plasma Mass Spectrometers (ICP-MS) for use at Wright-Patterson Air Force Base in Ohio, with the Air Force Research Laboratory intending to award a sole source purchase order to Agilent Technologies, Inc. under the NAICS code 334516. The sole source justification is based on Agilent being the original equipment manufacturer and the exclusive developer of the required MassHunter software, making it the only vendor capable of fulfilling the technical specifications outlined in the Minimum Requirements Document dated 29 July 2026. This action is authorized under RFO 12.102(a), and while no competitive bidding is currently planned, the government is soliciting capability statements, quotations, or exceptions from other responsible sources to determine whether competition is feasible. All submissions must be emailed to Jason Sav at jason.sav@us.af.mil no later than Friday, 15 August 2026 at 5:00 PM Eastern Time, with the subject line precisely formatted as “Notice of Intent to Award SS – Inductively Coupled Plasma Mass Spectrometer (ICP-MS)”. Attachments must be in .PDF, .doc, .docx, .xls, or .xlsx format only; .zip or .exe files will be filtered out and deleted. Failure to follow these instructions may result in submission non-receipt.
FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334516
New
Federal
Frequency Comb System
Solicitation # NB6720202601682
The U.S. Department of Commerce, National Institute of Standards and Technology (NIST), is seeking market information through a Sources Sought notice to evaluate industry capabilities for providing a Frequency Comb System at its Boulder, Colorado facility. The system must lock four lasers at wavelengths of 776 nm, 780 nm, 960 nm, and 1260 nm and include all necessary components such as a 1560 nm optical frequency comb with at least six output ports, a frequency extension base module, four wavelength-specific extension channels, four laser locking modules, an enclosure and control unit, a frequency counter, and supporting electronics. Delivery, installation, and training must occur within seven months of order receipt, with on-site performance required at the NIST Boulder site. Vendors must be prepared to provide training for two NIST personnel in operation, maintenance, and troubleshooting, and supply a 12-month parts-only warranty. The requirement is classified under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing, and respondents must verify their size status under the 1,500-employee small business threshold. Responses are due by June 15, 2026, and must be submitted in Word or PDF format, not exceeding ten pages excluding the cover page and pricing information, to lia.arthofer@nist.gov. No proprietary, classified, or sensitive information may be included. Respondents must provide a cover page with their Unique Entity ID, company details, and SAM.gov registration status, and indicate whether they are a small business capable of complying with FAR clause 52.219-14, Limitations on Subcontracting. Any existing GSA Multiple Award Schedule or other federal contract must be disclosed with full documentation. NIST is actively soliciting input on potential evaluation factors and standard commercial pricing to inform future acquisition strategy, but this notice does not constitute a solicitation or commitment to award. Technical specifications are outlined in a draft document, and vendors may offer suggestions to improve clarity and competitiveness. On-site access is restricted to U.S. citizens unless pre-registered 30 days in advance, with foreign national presence limited to three consecutive days without additional coordination. Vendor technicians must be present for installation, and software deliverables must be sent to a designated NIST email. Export control compliance with ECCN and EAR/ITAR is required, and all vendors must maintain active SAM.gov registration. Responses received after the deadline may not be considered,
Department Of Commerce Nist

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 332813
New
Federal
Mechanical Testing Specimen FabricationThe contract requires the fabrication and supply of specialized metallurgical test specimens including witness bars, tensile coupons, and hot cycle fatigue coupons, all designed to meet Marshall Space Flight Center guidance and integrated directly into laser powder bed fusion build plates for material qualification purposes. These specimens must be manufactured with precise dimensional and metallurgical controls to ensure accurate mechanical performance data under simulated operational conditions, supporting NASA’s mission to validate new materials and additive manufacturing processes. The work is classified under NAICS code 332813 and is structured as a subcontract, with a strict submission deadline of August 4, 2026, emphasizing the time-sensitive nature of the material qualification effort. All delivered specimens must be traceable, properly documented, and capable of being tested under standardized conditions to provide reliable data for certification purposes. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, indicating involvement in a high-stakes aerospace development initiative. While no specific location for performance is listed, the requirement implies close coordination with NASA’s additive manufacturing and materials testing facilities. The solicitation is open to qualified subcontractors with demonstrated expertise in metallurgical specimen fabrication and integration within laser-based additive manufacturing systems.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333314
New
Federal
Additive Manufacturing of Inconel 718 Turbine Components via SLM Solutions 280The contract requires the performance of laser powder bed fusion additive manufacturing using the SLM Solutions 280 machine to produce turbine blades and shaft assemblies from Inconel 718, a high-performance nickel-based superalloy specified for its strength and thermal resistance under extreme conditions. The manufacturing process must adhere strictly to NASA-MSFC drawing MC34120-003 and the associated manufacturing plan 34120-MFG-PLAN, ensuring dimensional accuracy, material integrity, and mechanical properties aligned with NASA’s mission-critical standards. A design of experiments (DOE) component is included to systematically optimize laser parameters such as power, scan speed, hatch spacing, and layer thickness to achieve defect-free, high-density parts with consistent microstructure and mechanical performance. All work must be completed in compliance with federal procurement standards and delivered by the response deadline of August 4, 2026. The solicitation is classified as a subcontract under NAICS code 333314, indicating it pertains to the manufacturing of industrial machinery, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. While no specific place of performance or point of contact is provided, the nature of the work implies the need for a qualified additive manufacturing facility with demonstrated capability in aerospace-grade metal AM, experience with Inconel 718, and familiarity with NASA-specific technical documentation and quality assurance protocols.
Optical Instrument and Lens Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details