Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Gas Detector Manufacturing and Assembly

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the full lifecycle manufacturing, assembly, calibration, and testing of 30 gas detectors according to DLA specifications, encompassing all phases from PCB fabrication and firmware integration to final quality assurance. All work must comply with rigorous technical and quality standards, ensuring each unit meets performance requirements for deployment. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility to small business concerns as defined by FAR 19.5, and is classified under NAICS code 334511 for measurement and testing equipment manufacturing. Performance is required at a facility located in Tracy, California, with a zip code of 95304-5000. The opportunity was posted on August 2, 2026, with proposals due by August 13, 2026, and is structured as a subcontract under the Maritime Supply Chain division of the Department of Defense.

General Info

Manufacture 30 gas detectors per DLA specs, small business set-aside, Tracy CA facility, proposals due August 13, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full lifecycle manufacturing, assembly, calibration, and testing of 30 gas detectors per DLA specifications, including PCB fabrication, firmware integration, and final QA.

Similar Contracts

Same NAICS industry code

Gas Detector Supply and Kit AssemblyThe contract calls for the supply of 58,000 gas detector units, each fully assembled into standardized kits complete with comprehensive parts lists and detailed assembly instructions. All units must be packaged in strict compliance with military-grade packaging and labeling standards, including adherence to hazardous materials regulations for transportation and storage. The performance location is designated as Tracy, California, with the delivery expected to meet the stringent requirements of the Department of Defense through its Maritime Supply Chain division. The solicitation is issued as a subcontract under NAICS code 334511 and is open for responses until August 13, 2026, following a posting date of August 2, 2026. All deliverables must conform to federal and military specifications to ensure compatibility, safety, and readiness in operational environments.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Medical Resuscitator ValveThe contract requires full-scale manufacturing, assembly, testing, packaging, and labeling of a resuscitator valve specifically designed for medical use under stringent military and medical device standards. All work must be executed in full compliance with applicable regulatory requirements to ensure the device meets the reliability, safety, and performance benchmarks mandated by defense and healthcare authorities. The product is intended for deployment in critical care environments where failure is not an option, necessitating rigorous quality control throughout every phase of production. The solicitation is issued as a subcontract under the Department of Defense’s Medical Supply Chain, with the place of performance centered at APO zip code 09094-3219. The NAICS code 334511 identifies the industry classification as medical equipment and supplies manufacturing. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, indicating a narrow window for qualified suppliers to submit proposals. The contract is not subject to any set-aside provisions, meaning it is open to all eligible contractors without geographic or size-based restrictions. The reference number SPE2DS26T297V must be used for all correspondence and submissions, and all work must be completed in alignment with the technical specifications and compliance protocols outlined in the full solicitation documentation.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

Infrared Control Unit SupplyThe contract involves the supply of two military-grade infrared control units identified by NSN 5850-01-595-9396, with strict adherence to packaging and marking standards required for defense logistics. Delivery must be completed within five days of award, ensuring rapid operational readiness. The procurement is classified as a subcontract under NAICS code 334511, which pertains to navigational, measuring, electromedical, and control instrumentation manufacturing. It is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance required at a location in San Diego, California, specifically at the zip code 92136-5205. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, indicating a short lead time for potential vendors to submit proposals. All deliverables must meet exacting military specifications without exception.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Supplier of Medical Electrical EquipmentThe contract requires the supply of medical electrical equipment identified by NSN 6515015927774, with strict adherence to labeling and delivery standards, including FOB Destination terms requiring delivery within 20 days of award. The equipment must meet all applicable regulatory and technical specifications for medical devices intended for Department of Defense use. The solicitation is classified as a subcontract under NAICS code 334511, indicating the focus on manufacturing medical and dental instruments and supplies. The posting date is August 2, 2026, with responses due by August 10, 2026, and the contract is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. All deliveries must be fulfilled to the designated performance location without specification of city or state, and the supplier must ensure full compliance with federal procurement guidelines for defense medical equipment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

Supply of Thermal Blood Transport ContainersThe contract calls for the procurement and delivery of thermal containers specifically designed for the transport of blood products, adhering strictly to military shipping standards to ensure safety, integrity, and compliance during transit. These containers must meet rigorous environmental and operational requirements to maintain optimal temperature conditions throughout the supply chain, particularly in high-stress or field environments. Delivery is governed by FOB destination terms, meaning ownership and risk transfer to the recipient only upon arrival at the specified location, which is Fort Bragg, North Carolina, with a ZIP code of 28310. The solicitation falls under NAICS code 334511, indicating it relates to the manufacturing of medical, dental, and hospital equipment, and is classified as a subcontract opportunity issued by the Department of Defense through the Medical Supply Chain FSH office. Responses must be submitted by August 10, 2026, following the solicitation’s public posting on August 2, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Packaging and Shipment for Military DeliveryThe contract requires the supply, packaging, labeling, and shipment of an electronic measurement module in full compliance with U.S. Department of Defense hazardous materials standards, specifically MIL-STD-129 for labeling, MIL-STD-130 for item identification, and MIL-STD-2073-1E for packaging and preservation. All processes must adhere to strict military specifications to ensure the safe handling and transport of sensitive electronic equipment classified as hazardous material. The module must be packaged to withstand harsh environmental conditions and transported via approved methods suitable for military logistics. The shipment is destined for a naval vessel operating at a Fleet Post Office address with the zip code 09587, requiring specialized delivery protocols for overseas and mobile military locations. The solicitation, issued under the MARITIME SUPPLY CHAIN ESOC BUYS division of the Department of Defense, is classified as a subcontract opportunity with a NAICS code of 334511 for electronic instrument manufacturing. Bids must be submitted no later than August 13, 2026, following the posting date of August 2, 2026, with all compliance documentation and packaging validations required to meet DoD audit and inspection criteria prior to dispatch.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

Supply of NSN 5310010471027 (Commercial Off-The-Shelf Item)The contract seeks the procurement and delivery of two units of a commercial off-the-shelf item identified by NSN 5310010471027, with all aspects of procurement strictly bound to military specifications for packaging, labeling, traceability, and hazardous material handling. Despite being a commercial item, the requirements demand full adherence to defense-grade standards to ensure compatibility, safety, and accountability throughout the supply chain. The offering must meet rigorous documentation and compliance protocols, particularly in tracking serial numbers, proper hazardous material classification, and secure packaging suitable for military logistics. The solicitation, issued by the ASC Commodities Division under the Department of Defense, is structured as a subcontract with a response deadline of August 10, 2026, and was posted on August 2, 2026. The North American Industry Classification System code 334511 indicates the item falls under Electronic Component and Product Manufacturing, aligning with standard industrial production capabilities. The place of performance and point of contact details are unspecified, and no set-aside designation is applied, meaning open competition is permitted. All submissions must be directed through the official DIBBS portal linked in the contract details, and non-compliance with any mandated technical or administrative requirement will result in disqualification.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Ammeter Supply and DeliveryThe contract calls for the procurement and delivery of one ammeter identified by NSN 6625016708522 to Fort Sill, Oklahoma, with strict adherence to all Department of Defense packaging, marking, and hazardous materials handling standards. Delivery must meet exacting military specifications to ensure compatibility, safety, and logistical compliance within DoD supply chains. The solicitation is classified as a subcontract under NAICS code 334511, indicating it falls within the manufacturing of instrumentation and related electronic equipment. The opportunity was posted on August 2, 2026, with a firm response deadline of August 13, 2026, and is managed by the Maritime Supply Chain ESOC Buys organization under the Department of Defense. The place of performance is specifically designated as Fort Sill with a zip code of 73503-0000, and all activities must align with federal procurement protocols for defense-related acquisitions.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

CLAMP, TUBING, REGULATIN

Solicitation # SPE2DS-26-T-294F

The contract calls for 8 packages of ratcheting plastic tubing clamps, each package containing 25 units, for a total of 200 clamps. Each clamp is 4.3 inches long, non-sterile, disposable, and designed to occlude tubing with an outer diameter between 1 and 8 mm, featuring smooth jaws and finger rings for easy handling. The item is identified by NSN 6515-01-614-0551 and must be supplied with the source and part number clearly specified by the bidder. Packaging requirements mandate that each unit be sealed in a protective container to prevent damage and that all shipments be packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible rate to the delivery point at Fort Hood, Texas. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of the standard are available through DLA Troop Support. The solicitation, issued under SPE2DS-26-T-294F, incorporates technical and quality requirements from the DLA Master List, and the revision in effect at the solicitation issue date controls compliance. The contract was posted on August 2, 2026, with a response deadline of August 10, 2026, and delivery must be completed within 20 days of award. The purchasing agency is the Department of Defense, Medical Supply Chain MD Surg FSF, with Michael Small as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-244U

The contract is for the procurement of 30 gas detectors identified by NSN 6665-01-723-2328 and part number MBB3-00C105E-020 under solicitation SPE7M1-26-T-244U, issued by the Department of Defense through the Maritime Supply Chain. The unit of issue is each, with a total contract value of $30.00 per unit, delivered FOB origin within 25 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including special marking code ZZ indicating the item is a delicate instrument and open only for inspection or use. The item must be labeled per MIL-STD-129, palletized according to DLA standards, and shipped to the receiving warehouse in Tracy, California. Technical and quality requirements are governed by the DLA Master List, with revisions effective as of the solicitation issue date. This is a total small business set-aside under NAICS code 334511, with a response deadline of August 13, 2026, and an original required delivery date of November 13, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-245M

The contract specifies the procurement of 58 kits of a gas detector identified by NSN 6665016908588 and part number HU-X1W1H1M1Q1-Y-NV from Honeywell Analytics Inc., under solicitation SPE7M1-26-T-245M. Delivery is required within 158 days FOB destination, with zero tolerance for quantity variance. All items must comply with stringent packaging and preservation standards per MIL-STD-2073-1E Appendix D for kits, requiring each kit to include a parts list with part names, numbers, and quantities, and all loose hardware must be sealed in individual containers using the highest applicable preservation method to prevent corrosion or damage. Packaging must conform to MIL-STD-129 for marking, with serial numbers mandated on unit, intermediate, and shipping containers, and packing lists must reflect these serial numbers per specified paragraphs. The preservation method must protect the most critical item within each kit, and no bulk shipping of hardware is permitted. Mercury and mercury compounds are strictly prohibited in any preservation, packaging, or marking materials. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications follow predefined verification levels or AQLs. Sampling may use attribute or variable inspection methods at the manufacturer’s discretion unless contractually directed. The contract invokes DLA’s Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Special marking requirements are denoted as ZZ and must align with MIL-STD-129. The unit of issue is KT (kit), and items must be palletized per RP001 DLA packaging requirements. Compliance with IP025 for hazardous materials and IP056 prohibiting mercury compounds is mandatory. Final inspection and acceptance occur at destination, and all items must arrive fully serviceable without requiring further sorting or repackaging by the recipient. The point of contact for inquiries is Michael Reese of the Department of Defense’s Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

CABLE, INVASIVE BLOOD P

Solicitation # SPE2DS-26-T-298Q

The contract is for the procurement of invasive blood pressure transducer interface cables, specifically right-angle cables with an Edwards connector designed for oval transducers, identified by NSN 6515-01-615-0921. The unit of issue is each, with a total quantity of four units split across three line items—two at $2.00 each and two at $1.00 each—with delivery required within 20 days after award at FOB destination. All items are regulated by the FDA, and contractors must submit referral documentation through EBS including bidder and manufacturer details, part numbers, and product descriptions. The product must be packaged commercially, with each unit sealed in a container to prevent damage, and shipped in commercial exterior containers that ensure safe, low-cost delivery by common carrier. Medical labeling standards supersede all military standards, requiring compliance with Medical Marking Standard No. 1, which replaces MIL-STD-129 for all medical acquisitions, and packaging data must adhere to MIL-STD-2073-1E with specific coded fields for preservation, wrapping, cushioning, and container types. Palletization must follow DLA Packaging Requirements for Procurement, and the use of ASTM D3951 is permitted only if not superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence. Shipments must not use parcel post and must be delivered via traceable freight to designated DoD facilities in Tinker AFB, Oklahoma, and Kadena AB, Japan. All contracts require compliance with FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous materials, cybersecurity safeguards, subcontracting, safety reporting, transportation, and payment systems. Invoicing must be conducted exclusively through Wide Area WorkFlow, and the contracting officer retains authority to insert the contract type, evaluate proposals, and enforce requirements, including waiver of certain clauses. Acceptance and inspection occur at the destination, and contractors must provide accurate Unique Entity Identifiers, size status, and socioeconomic certifications. No specific contract value is stated due to unpopulated pricing fields, though historical part numbers from Mckesson and Zoll are referenced for identification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Domestic and Maritime Shipping ComplianceThe contract requires coordination of transportation to Tracy, California, ensuring full compliance with U.S.-flag vessel regulations under the Jones Act and related maritime statutes. All shipments must adhere to federal maritime requirements, and any exceptions or exemptions must be formally requested through MARAD waivers, which the contractor is responsible for filing and managing. The contractor must also prepare, submit, and maintain all necessary shipment documentation to ensure regulatory alignment and logistical compliance throughout the transport process. The work is classified as a subcontract under NAICS code 488999 and is issued by the Department of Defense through the Maritime Supply Chain office. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026. Performance is specified to occur in Tracy, California, with the ZIP code 95304-5000 as the definitive place of performance. Although the solicitation number and point of contact details are not provided, the contract is accessible via the DIBBS platform for qualified subcontractors seeking to participate in this maritime logistics engagement.

All Other Support Activities for Transportation

POSTED

about 17 hours ago

DEADLINE

Military Packaging and Marking ServicesThe contract requires comprehensive packaging, marking, and labeling services strictly aligned with MIL-STD-129R and MIL-STD-2073-1E standards, ensuring all items are properly prepared for military logistics and field deployment. A critical requirement includes the application of the special marking code 'ZZ' along with full segregation of components within each kit and the inclusion of technical inserts detailing usage, maintenance, and safety instructions. All work must be performed to guarantee compliance with military specification for identification, handling, and traceability throughout the supply chain. The place of performance is designated as Tracy, California, with the zip code 95304-5000, indicating where the services are expected to be delivered and executed. This is a subcontract opportunity under NAICS code 561990 for other support services, issued by the Department of Defense through its Maritime Supply Chain organization. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, allowing potential vendors a limited window to submit proposals. The contract does not specify any set-aside status and is open to qualified subcontractors with the technical capability and experience to meet exacting military packaging standards. Full adherence to the referenced standards and inclusion of all required documentation are non-negotiable for award consideration.

All Other Support Services

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract entails the preparation and timely submission of hazard warning labels and Safety Data Sheets for gas detection equipment, ensuring full alignment with current federal hazardous materials regulations. This includes ongoing monitoring of regulatory updates and adjustments to documentation to maintain continuous compliance, with a focus on accuracy, clarity, and adherence to standards governing the communication of chemical hazards. The work must be performed in a manner that supports safe handling, storage, and transportation of gas detectors across military and defense supply chains. The contract is structured as a subcontract under the NAICS code 541690 and is tied to the Department of Defense’s Maritime Supply Chain initiative, with performance required at the designated location in Tracy, California, zip code 95304-5000. Bidders must respond by the deadline of August 13, 2026, and the opportunity was posted on August 2, 2026. While no specific set-aside status is indicated, the subcontract underscores the critical need for precise, regulated documentation in high-stakes defense environments where safety and compliance directly impact operational readiness.

Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

Freight and Transportation Logistics (FOB Origin, FDT Program)Transport three packaged AC motors from the supplier’s facility to the DLA Distribution facility in San Diego under the FOB Origin and First Destination Transportation program, ensuring all movements comply with U.S. government logistics standards. The contract requires full tracking and reporting capability throughout the shipment lifecycle, with documentation and data submission meeting federal transportation compliance requirements. The work falls under NAICS code 484220 for truck transportation and is classified as a subcontract under the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and performance must be completed at the designated destination in San Diego, ZIP 92136-3581.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

Packaging, Labeling, and Hazard Communication ServicesThe contract requires the provision of military-compliant packaging, preservation, labeling, and safety data sheet preparation for three AC motors prior to shipment, ensuring full adherence to Department of Defense standards. Key tasks include applying barcodes, implementing MIL-STD-129 marking for identification and tracking, and achieving hazardous materials compliance through accurate SDS documentation and handling protocols. All work must be performed to meet strict military logistics requirements, with the place of performance centered in San Diego, California, at the specified ZIP code. The solicitation is classified as a subcontract under NAICS code 561990, and responses are due by August 13, 2026, with the opportunity posted on August 2, 2026, through the DLA DIBBS portal.

All Other Support Services

POSTED

about 17 hours ago

DEADLINE

Supply of Alternating Current Motors (Commercial Off-The-Shelf)The contract requires the procurement, packaging, labeling, and delivery of three new alternating current motors with NSN 6105-01-508-7921, all of which must meet Department of Defense and Defense Logistics Agency standards. This includes strict adherence to military-grade packaging protocols, proper hazardous materials handling, and accurate labeling in compliance with federal regulations. The motors are classified as commercial off-the-shelf items, indicating they are readily available from existing commercial suppliers without customization. Work must be completed and delivered to the specified place of performance in San Diego, California, with a zip code of 92136-3581. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. This is a subcontract under the Maritime Supply Chain organization within the Department of Defense, classified under NAICS code 335312 for electric motor, generator, and transformer manufacturing. All activities must ensure full traceability, documentation, and readiness for military logistics systems without exception.

Motor and Generator Manufacturing

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance and SDS DocumentationThis contract entails providing regulatory compliance support for hazardous materials used in packaging or products, with a focused emphasis on preparing Safety Data Sheets and ensuring proper labeling in accordance with OSHA and Department of Defense standards. The work is required to meet stringent federal regulations governing the handling, documentation, and communication of hazardous substances to ensure safety and legal compliance across military supply chain operations. All deliverables must align with current federal guidelines and be tailored to the specific needs of DoD-related applications. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated for small business entities as defined by the SBA, and is classified under NAICS code 541620 for environmental consulting services. Performance is required to occur in New Cumberland, Pennsylvania, with a response deadline of August 13, 2026, and the opportunity was posted on August 2, 2026. Bidders must demonstrate expertise in hazardous materials compliance, SDS documentation, and familiarity with both civilian and military regulatory frameworks, as the outcome directly supports the Department of Defense’s Maritime Supply Chain operations.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

Defense-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-standard packaging, preservation, and marking services for diaphragm actuators, with specific emphasis on vacuum sealing to maintain environmental integrity and corrosion protection to ensure long-term operational readiness. All units must be labeled with compliant barcode systems to support inventory tracking and logistics management throughout the defense supply chain. The work must adhere strictly to defense specifications for preservation techniques and packaging materials, ensuring the components remain protected during transit and storage under extreme conditions. This is a total small business set-aside under the SBA program, classified under NAICS code 332999, and is issued by the Department of Defense through the Maritime Supply Chain office. The opportunity is open for responses until August 13, 2026, with performance required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All proposals must meet the stringent requirements of military-grade documentation and handling procedures, and bidders must qualify as small businesses eligible under the Federal Acquisition Regulation. The contract is structured as a subcontract, indicating it supports a larger procurement initiative within the defense logistics framework.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Diaphragm Actuator Manufacturing and SupplyA small business is being sought to manufacture and supply three precision diaphragm actuators for defense applications, with all units required to meet DLA technical standards. The contract is structured as a subcontract under a total small business set-aside, meaning only small businesses certified by the SBA are eligible to bid. The work falls under NAICS code 333912, specifying the industry classification for other commercial and service machinery manufacturing. Delivery must be made FOB origin to New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is issued by the Department of Defense through the Maritime Supply Chain office. Bidders must submit proposals by the deadline of August 13, 2026, following the release of the solicitation on August 2, 2026, and must ensure full compliance with all technical requirements specified by DLA to qualify for award.

Air and Gas Compressor Manufacturing

POSTED

about 17 hours ago

DEADLINE

Regulatory Compliance and Documentation SupportThe contract titled Regulatory Compliance and Documentation Support is a subcontract aimed at assisting a prime contractor in meeting federal regulatory requirements related to documentation and compliance. Key responsibilities include managing invoice submissions through the Invoice 2in1 system, preparing and submitting required documentation via the Wide Area WorkFlow system, and ensuring proper Safety Data Sheet submissions for hazardous materials. The work is directly tied to maintaining adherence to Department of Defense procurement and safety protocols, with all tasks centered on accurate, timely, and complete recordkeeping to avoid compliance breaches. Performance of the contract is specifically required to take place in Texarkana, with a ZIP code of 75507-5000, and is classified under the NAICS code 541611, indicating it involves administrative management and general management consulting services related to regulatory processes. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026. The contracting activity falls under the Maritime Supply Chain organization within the Department of Defense, and the subcontract is accessible via the DIBBS platform for qualified offerors seeking to support critical defense logistics compliance functions.

Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

Logistics and Freight Shipping ServicesThe contract entails the logistics and freight shipping services required to transport safety relief valves from the supplier to the Defense Logistics Agency depot in Texarkana, Texas, with a zip code of 75507-5000. All aspects of the shipment, including coordination of freight, preparation of required documentation, and adherence to federal shipping reporting systems, must be fully managed by the contractor to ensure compliance with Department of Defense standards. The work falls under NAICS code 484220, which classifies it as a truck transportation service, and is structured as a subcontract within the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with no set-aside designation specified, meaning all eligible entities may compete. The performance location is clearly defined as the DLA depot in Texarkana, and the entire scope requires strict alignment with government logistics protocols for defense-related shipments.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE