Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GASKET AND PREFORMED P

Active
SPE7L3-26-T-212PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of five kits of Gasket and Preformed Packing sets under NSN 5330-01-691-7677. The contract requires strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-DTL-117 to protect items from ultraviolet rays using waterproof, greaseproof, and opaque bags. All supplied items must be completely free of asbestos, and any alternative materials must be approved according to specified clauses. The delivery timeline is set for 163 days after the order is placed. Compliance with MIL-STD-130N for identification marking of military property is mandatory, and the contract incorporates various quality requirements including the removal of government identification from non-accepted supplies and the handling of covered defense information. The solicitation is managed by Susan Diamond and is tied to NAICS code 339991, with performance located in New Cumberland, Pennsylvania.

General Info

DoD procurement of five asbestos-free gasket and packing kits delivered within 163 days.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

PR: 7018068800 PRLI: 0001 CONT’D, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-212P Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET AND PREFORMED PACKING SET
GASKET AND PREFORME
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-691-7677 Quantity: 5 KT Purchase Request: 7018068800QTY: 5 Delivery: 163 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-04G4
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two O-rings under NSN 5331-01-180-2410. The contract requires delivery within 20 days after receipt of the order. The procurement is governed by NAICS code 339991 and is managed by the DLA, with a response deadline of September 8, 2026. The supplier must adhere to specific technical and quality requirements as outlined in the DLA Master List, including strict packaging standards. Notably, the contract prohibits the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors. All supplies must also comply with regulations regarding the removal of government identification from non-accepted items.
LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAIN
Solicitation # SPE7L3-26-T-213L
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support under solicitation number SPE7L3-26-T-213L, is for the procurement of 549 units of Packing with Retain, identified by part number 5330-00-626-4883. The contract requires delivery within 62 days after receipt of order, with performance taking place at Hill AFB. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a C3PAO. Additionally, the project involves technical data subject to ITAR and EAR export controls. To access this data, contractors must have an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training and questionnaires, and receive approval from the DLA controlling authority.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-04H7
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-04H7, is for the procurement of one gasket, identified by NSN 5330-20-000-6200. The contract requires delivery within 20 days after the order is placed. The primary point of contact for this requirement is Kristina Derry. The supplier must adhere to specific technical and quality requirements as outlined in the DLA Master List and follow RP001 packaging standards. Notably, the contract strictly prohibits the use of Class I ozone depleting chemicals and asbestos in the supplied items. Any substitute materials must be submitted for approval unless they are already authorized by the specification requirements.
LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE4A5-26-T-394L
This contract is for the procurement of one packing retainer, identified as NSN 5330014481632 and Boeing part number 90-3328-3016. The item is designated as a critical application item and must be delivered to Tinker AFB within five days of order. The agreement specifies a zero percent quantity variance and requires inspection and acceptance at the destination. The supplier must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots unless otherwise specified.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L1-26-T-04L3
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 323 plain encased seals under part number 5330-01-291-5071. The contract requires delivery within 90 days after the order is placed and specifies that the items must be free of asbestos as defined by FED-STD-313. Performance for this contract is located in Texarkana, Texas. The agreement is subject to several technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. All items must adhere to MIL-STD-130N for the identification marking of U.S. military property. The solicitation is open for responses until September 8, 2026, and falls under NAICS code 339991.
LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-214C
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one gasket under National Stock Number 5330-01-225-4213. The contract requires delivery within 20 days after receipt of the order. The procurement is governed by NAICS code 339991 and is managed by the Defense Logistics Agency, with a response deadline of September 8, 2026. The contract mandates strict adherence to technical and quality requirements, including specific packaging standards to protect items from ultraviolet rays using waterproof, greaseproof, and opaque bags. Supplies must be entirely free of asbestos and cannot contain intentionally added mercury, except for specific functional exceptions. All deliverables must comply with DLA packaging requirements and the removal of government identification from non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7M4-26-T-319N
This solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-T-319N, is for the procurement of 50 plain encased seals, identified by NSN 5330-01-248-1224 and part number 472199 from Vickers Inc. The contract requires delivery within 168 days after order and specifies performance at Hill AFB. The items must adhere to strict material and quality standards, specifically prohibiting the use of asbestos as defined in FED-STD-313 and Class I ozone-depleting chemicals. Compliance with DLA packaging requirements and the master list of technical and quality requirements is mandatory. Any substitute chemicals used must be submitted for approval unless already authorized by the specifications.
FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET SET
Solicitation # SPE7L1-26-T-04H2
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one gasket set under National Stock Number 5330-01-654-5882. The contract requires delivery within 20 days after receipt of the order and specifies that all supplied items must be completely free of asbestos. The procurement is subject to several technical and quality requirements, including MIL-STD-130N for identification marking and specific packaging standards. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, and opaque bags according to MIL-DTL-117. Compliance with DLA packaging requirements and the removal of government identification from non-accepted supplies is also mandatory.
LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECI
Solicitation # SPE7L3-26-T-213V
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 79 nonmetallic special shaped section seals under NSN 5330-01-114-7698. The contract requires delivery within 160 days after receipt of order and specifies that all supplied items must be completely free of asbestos. The supplier must adhere to strict quality and packaging standards, including MIL-STD-130N for identification marking and MIL-DTL-117 for waterproof, greaseproof, and opaque packaging to prevent deterioration from ultraviolet rays. Compliance with DLA master technical requirements, packaging protocols, and covered defense information regulations is mandatory for all shipments, including direct vendor delivery and foreign military sales.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-04J3
This solicitation issued by the Department of Defense Land Supply Chain is for the procurement of one gasket, identified by part number 2143754-1 and NSN 5330-01-362-0736. The item is associated with Allied-Signal Inc in Teterboro, New Jersey. The contract requires delivery within 10 days after the order is received and falls under NAICS code 339991. Compliance with specific DLA packaging and quality requirements is mandatory, as outlined in the DLA Master List of Technical and Quality Requirements. Additionally, the contract specifies the removal of government identification from any supplies that are not accepted. The solicitation period closes on September 8, 2026, and the primary point of contact for this requirement is Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-213H
This solicitation, identified as SPE7L3-26-T-213H, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 39 units of preformed packing, part number 5330-01-553-2264. The contract is designated as a total small business set-aside under NAICS code 339991, with a delivery requirement of 167 days after the order is placed. Performance is located in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the prohibition of Class I ozone-depleting chemicals. Compliance with MIL-STD-130N for identification marking and CMMC Level 2 certification is required. Additionally, the contract contains stringent export control regulations under ITAR and EAR, restricting the disclosure of technical data to authorized persons and requiring contractors to maintain approved JCP certification and complete mandatory training.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L3-26-T-213W
This contract, identified as SPE7L3-26-T-213W, is a total small business set-aside for the procurement of 128 units of packing retainers under NSN 5330-01-718-4600. The delivery is required within 118 days, with a need ship date of January 5, 2027, and a final required delivery date of March 28, 2027. Shipments are to be delivered FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. The agreement mandates strict adherence to technical and quality requirements, including the prohibition of class I ozone depleting chemicals and the restriction of mercury unless specifically authorized. Due to the risk of ultraviolet ray deterioration, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements for procurement.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 336330
New
DIBBS
TIE ROD END, STEERING
Solicitation # SPE7L3-26-U-0683
Solicitation SPE7L3-26-U-0683 is an Indefinite Delivery Contract issued by the Department of Defense, Land Supplier Ops Vehicle SPT, for the procurement of steering tie rod ends under NSN 2530-00-670-4579. The contract specifies an estimated annual quantity of 116 units with a maximum contract value of 350,000.00 dollars. Delivery is required within 75 days after the delivery order, with terms set as FOB Origin and both inspection and acceptance occurring at the destination. The procurement is governed by the DLA Master List of Technical and Quality Requirements, and the manufacturer must adhere to strict prohibitions against using Class I ozone-depleting chemicals. Technical execution requires compliance with MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking and labeling, and RP001 for palletization. Because the item may require specific casting or forging tooling that the government does not possess, contractors are directed to the DLA Casting and Forging Assistance Request process for sourcing support. Administrative requirements include the use of Wide Area WorkFlow for electronic invoicing and payment requests. Proposals must be submitted electronically via the DIBBS portal by August 26, 2026, and must include all mandatory representations and certifications regarding entity size and socioeconomic status.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L3-26-T-213Z
This contract is for the procurement of 305 units of a critical gun part identified as a hand gun guard. The item is classified as a defense article subject to International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. The procurement includes a restricted technical data package from Knights Armament Company, necessitating a signed license agreement and strict adherence to export control regulations for technical data. Key quality and compliance requirements include Contractor First Article Testing and potential Product Verification Testing, with inspections conducted by the DCMA QAR at the actual manufacturer's facility. The contractor must comply with CMMC Level 2 certification and specific DLA packaging and quality standards. Certificates of Conformance are not authorized for this item. Delivery is set for 382 days after order, and the contract prohibits the use of Class I ozone depleting chemicals.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336330
New
DIBBS
SHAFT, STEERING COLUMN
Solicitation # SPE7L3-26-T-213M
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 14 steering column shafts under NSN 2530-01-446-5277. The contract is designated as a total small business set-aside with a delivery requirement of 335 days after receipt of order. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to access the necessary technical data. All items must also adhere to DLA packaging requirements for procurement.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
FRAME SECTION, STRUC
Solicitation # SPE7L3-26-T-214G
This solicitation, identified as SPE7L3-26-T-214G, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of four structural frame sections under NSN 2510-01-576-9031. The contract requires delivery within 66 days after receipt of order and falls under NAICS code 332999. Performance is designated for New Cumberland, Pennsylvania. The contract carries stringent security and compliance requirements, including CMMC Level 2 certification via a C3PAO and the protection of covered defense information. Furthermore, the technical data is subject to ITAR and EAR export controls. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification, complete specific DOD export-controlled technical data training, and receive approval from the DLA controlling authority.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-214E
This solicitation, issued by the Department of Defense under the agency Land Supplier Opns Vehicle Spt, is for the procurement of two gaskets identified by NSN 5330-00-802-6376. The contract requires delivery within 121 days after receipt of order and specifies that the items must be free of asbestos. All supplies must adhere to DLA packaging requirements and follow specific technical and quality standards as outlined in the DLA Master List. The contract mandates strict compliance with environmental and marking regulations, specifically prohibiting the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components. Items must meet NAVAIR aircraft launch and recovery equipment traceability requirements, with bare item markings including the contract number, NAWC CAGE, and part number as specified in the technical data drawings. Performance is set for New Cumberland, PA, and the solicitation is managed by Susan Diamond.
Aircraft Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, INTA
Solicitation # SPE7L3-26-T-214B
This contract is for the procurement of 38 intake filter elements, identified as NSN 2940016249315 and Deutz Corporation part number P537877. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania by February 17, 2027. The delivery terms are FOB Origin, with both inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements, including DLA packaging requirements RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. The contract specifies a strict quantity variance of plus or minus 0 percent. All procurement activities are managed by the Department of Defense Land Supplier Operations Vehicle Support agency under solicitation number SPE7L3-26-T-214B.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336320
New
DIBBS
FILLER NECK, VEHICULAR
Solicitation # SPE7L3-26-T-213U
This contract is a solicitation for the procurement of two vehicular filler necks under NSN 2590-00-999-2121, intended for use with M-113A1, M-113A2, and M-113A3 personnel carrier systems. The acquisition is managed by the Department of Defense Land Supplier Operations Vehicle Support, with a delivery requirement of 173 days after receipt of order. Compliance requirements include CMMC Level 2 certification and adherence to DLA packaging and quality standards. The contract strictly prohibits the use of Class I ozone-depleting chemicals and mandates strict export control of technical data under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details