Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GASKET

Active
SPE7LX-26-U-9121Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 24 gaskets identified by NSN 5330-01-358-8014 under solicitation SPE7LX-26-U-9121, with a total small business set-aside and a NAICS code of 339991. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, involving a medium duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be marked in accordance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Delivery is due within 97 days of award, with the solicitation open for responses until August 17, 2026, and the point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

General Info

24 gaskets, NSN 5330-01-358-8014, small business set-aside, no asbestos, MIL-DTL-117 packaging, MIL-STD-130N marking, delivery in 97 days.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

RFQ SPE7LX-26-U-9121 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-358-8014 Quantity: 24 EA Purchase Request: 1000238536QTY: 24 Delivery: 97 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-904V
The contract pertains to a single gasket item identified by NSN 5330-01-165-1362 with a quantity of one unit, subject to delivery within five days of award. All supplies must be free of asbestos, and any substitutions must comply with Clause L30 and Provision 4 conditions. The item must be marked in accordance with MIL-STD-130N dated November 16, 2012, for identification of U.S. military property, and government identification must be removed from any non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Covered Defense Information may apply, and packaging must meet DLA procurement standards. The solicitation number is SPE7L1-26-T-904V, issued on August 2, 2026, with responses due by August 13, 2026. The place of performance is Beaufort, South Carolina, 29904-6120, and the contract is managed by the Department of Defense’s Land Supply Chain under NAICS code 339991. Primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144G
The contract pertains to the procurement of gaskets with part number 89774 and NSN 5330-00-911-3574, requiring a quantity of 240 units to be delivered within 158 days after award. All supplied items must be completely free of asbestos, and any alternative materials or substitutions must adhere to the approval guidelines specified in Clause L30 and Provision 4. The technical and quality requirements governing this procurement are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The solicitation number is SPE7L3-26-T-144G, issued on August 2, 2026, with responses due by August 13, 2026. The contracting organization is the Department of Defense, under the Land Supplier Operations Vehicle Support, with performance located in New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Susan Diamond, reachable via email or phone. The NAICS code associated with this procurement is 339991, and the supplier is Mine Safety Appliances Co located in Pittsburgh, PA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L1-26-U-0535
The contract pertains to the procurement of a nonmetallic round section seal with NSN 5330-01-466-8565, quantity of 426 units, under solicitation SPE7L1-26-U-0535, issued by the Department of Defense’s Land Supply Chain. The item is classified under Federal Supply Classifications 5330/5331 and must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation. Delivery is required within 97 days FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required. All packaging and shipping activities must adhere to DLA’s packaging requirements, including provisions for hazardous materials. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in any component or contact surface, except for specific exemptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA, with portable items containing mercury requiring shockproof construction and a second containment boundary as per NAVSEA 5100-003D. Asbestos is completely prohibited under FED-STD-313. The requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The contract is a Women-Owned Small Business Set-Aside under NAICS code 339991, with pricing listed at a unit price for 426 units and total price calculated accordingly. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions determined by solicitation or award date depending on acquisition size. Contact for inquiries is Jennifer Payne, with the solicitation response deadline set for August 17, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145D
The contract solicitation for GASKET under solicitation number SPE7L3-26-T-145D requires the supply of 27 units identified by NSN 5330-01-720-6786 with a delivery deadline of 5 days after delivery order issuance. All items must be free of asbestos, and any alternative materials must adhere to the approval processes outlined in Clause L30 and Provision 4. The gaskets must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation as specified for Federal Supply Classifications 5330/5331. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications identified with R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and any government identification on non-accepted supplies must be removed. The contract also indicates that Covered Defense Information may apply, requiring adherence to relevant security protocols. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and performance is to be delivered to Norfolk, Virginia. Point of contact is Lee Miller of the Department of Defense, Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-U-4862
This contract specifies the procurement of 2,220 O-rings under NSN 5331-00-291-3272 for the Department of Defense through the Maritime Supply Chain, with a total small business set-aside classification. The product must comply with the Performance Review Institute’s Qualified Products List PRI-QPL-AMS-P-5315 and be manufactured or assembled only by accredited entities listed on the PRI QML or QPL, accessible via eAuditNet.com. All materials must be free of asbestos, and any prior listings containing asbestos are no longer acceptable; substitutions require formal approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or RFP issue date, unless amended. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation number is SPE7M1-26-U-4862, with responses due by August 17, 2026, and delivery required within 84 days after contract award. The point of contact is Bryan Fair, reachable at 614-693-0125 or bryan.fair@dla.mil.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145C
This contract, under solicitation number SPE7L3-26-T-145C, requires the delivery of two gaskets with NSN 5330-01-714-2809 and part number PG775000-31 at a unit price of $2.00, totaling $4.00. The items must be delivered within 20 days to Moody AFB, Georgia, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination. All packaging must comply with MIL-STD-2073-1E, including specific materials and methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 without special codes. The gaskets must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. Hazardous materials packaging rules apply, and parcel post is prohibited; shipments must use the fastest traceable means. The delivery must meet the original required date of July 16, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support, with Lee Miller as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144L
The contract pertains to the procurement of gaskets identified by NSN 5330-01-597-1378, with a total requirement of 6 units, under purchase request 7017602136, and an additional quantity of 30 units referenced in the context of a broader procurement action. Delivery must be completed within 58 days after award. The item is subject to strict packaging requirements mandating medium duty, waterproof, greaseproof, and opaque packaging in compliance with MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, with previously approved asbestos-containing codes or part numbers now rejected unless replaced by an approved alternative under Clause L30 and Provision 4 conditions. The gasket is manually excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size, and covered defense information provisions may apply. The solicitation, issued under SPE7L3-26-T-144L on August 2, 2026, with a response deadline of August 13, 2026, is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance location specified as Albany, Georgia, 31704-1128, and primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 6146925625.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-905U
The contract pertains to the procurement of a single O-RING with NSN 5331-20-005-6481, required for delivery within 10 days of award under solicitation SPE7L1-26-T-905U. The item must be packaged in a medium duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, and this requirement applies to all delivery types including direct vendor delivery, Foreign Military Sales, and stock shipments. The product must be free of asbestos and any ozone-depleting chemicals, with substitutes needing prior approval unless explicitly authorized by specifications. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes C03 from August 2016, and all government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Documentation for source approval requests and controlled defense information may also apply. The purchase is managed by the Department of Defense’s Land Supply Chain, with performance located in Torrance, CA, and primary point of contact Chelsea Cunningham.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-902H
The contract specifies the procurement of four O-rings, part number 671-00007, with NSN 5331-00-456-7963, to be delivered within 20 days of award. These O-rings are preformed packing components and must comply with DLA Packaging Requirements for Procurement, as well as technical and quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements. Zero-based sampling is required under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; any unspecified attributes are treated as major. Sampling may follow MIL-STD-105/ASQ Z1.4 for lot sizing, but acceptance must be zero non-conformances unless otherwise directed. The item must contain no asbestos as defined in FED-STD-313 and must not intentionally contain mercury or mercury-containing compounds in direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Documentation for source approval must be submitted by Apex Corp Denison Div, Columbus, Ohio. The solicitation number is SPE7L1-26-T-902H, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 339991, and the point of contact is Kristina Derry at the Department of Defense, Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-Q-1425
This contract pertains to the procurement of 153 O-rings with NSN 5331-00-850-3743 under solicitation SPE7L1-26-Q-1425, issued by the Department of Defense’s Land Supply Chain. The delivery deadline is set for 84 days after award, and responses must be submitted by August 13, 2026. The item is classified as a primary Qualified Products List (QPL) or Qualified Manufacturers List (QML) item, meaning only suppliers listed on the approved QPL/QML may participate, and strict compliance with Component QPL/QML requirements outlined in Procurement Note H02 is mandatory. All materials must be free of asbestos, and the use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements; substitutions require prior approval unless explicitly authorized by the specification. The contractor must retain full supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016 and must remove all government identification from non-accepted supplies. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The place of performance is Tracy, California, 95304-5000, and primary point of contact is Robert Warne at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144Z
The contract pertains to the procurement of a single gasket, identified by NSN 5330-01-715-1881, with a requirement for delivery within 20 days from award. The specification reference includes technical and quality requirements from the DLA Master List of Technical and Quality Requirements, accessed via a publicly available DLA website, with applicable revisions determined by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA packaging standards, and all supplies must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. Government identification must be removed from any non-accepted supplies, and the item must adhere to MIL-STD-130N for identification marking. Covered Defense Information may apply, triggering additional handling and security obligations. The solicitation, issued under number SPE7L3-26-T-144Z on August 2, 2026, with a response deadline of August 13, 2026, falls under NAICS code 339991 and is managed by the Department of Defense's Land Supplier Operations Vehicle Support. Performance is designated for Mechanicsburg, Pennsylvania, with primary point of contact Susan Diamond, reachable via email and phone provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-144M
The contract pertains to the procurement of preformed packing, specifically O-rings with part number 133.000.214 and NSN 5330-01-038-5413, for a quantity of ten units, under solicitation SPE7L3-26-T-144M. Delivery is required within 78 days after award, with performance to occur in New Cumberland, Pennsylvania. The item must comply with DLA packaging requirements and incorporate all technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition type. Strict prohibitions are in place against the use of asbestos as defined in Fed-Std-313 and the intentional addition of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or naval chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. The supplier is Ardx Corp located in Cedarburg, Wisconsin, and all supplies must be free of government identification if not accepted. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support through the primary point of contact, Amber Rohly, reachable via email and phone provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 313320
New
DIBBS
SEAL
Solicitation # SPE7LX-26-U-9125
The contract pertains to the procurement of a specific seal item identified by NSN 5330-01-181-4905, with a quantity of 19 units, under purchase request 1000238629. Delivery is required within 97 days after award, and the item strictly prohibits the presence of asbestos as defined in FED-STD-313. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition type—simplified acquisitions use the version in effect on the solicitation issue or award date, while large acquisitions rely on the version in force on the RFP issue date unless amended. The solicitation is a total small business set-aside under FAR 19.5, classified under NAICS code 313320, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation number is SPE7LX-26-U-9125, posted on August 2, 2026, with responses due by August 17, 2026. Primary point of contact is Theodore Misiolek, reachable via email and phone, and all details are accessible through the DIBBS portal.
Fabric Coating Mills

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
UPLOCK ASSEMBLY, SWA
Solicitation # SPE7LX-26-U-9124
The contract pertains to the procurement of a UPLOCK ASSEMBLY, SWAYBRACE with NSN 1095012849952 and part number 116018-1, supplied by L3HARRIS TECHNOLOGIES, INC. under solicitation SPE7LX-26-U-9124. Six units are required at a unit price of $6.00, totaling $36.00, with delivery required within 21 days FOB origin. The item is classified as a critical application item and falls under DLA DIRECT, CONUS coverage. The contract incorporates mandatory technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization strictly adhering to specified guidelines. The Government prohibits acceptance of surplus stock, and any non-accepted supplies must have government identification removed. Demilitarization procedures for Category I munitions items apply, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. The unit of issue is each (EA), and the procurement is subject to DoD authorized units of measure.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332994
New
DIBBS
KNIFE, COMBAT
Solicitation # SPE7LX-26-U-9128
This contract specifies the procurement of 1,864 combat knives identified by NSN 1095-01-677-1042 and manufacturer part number 112SBK-BLK from Benchmade Knife Co., Inc., under solicitation SPE7LX-26-U-9128. The item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers or exporters to be registered with the Directorate of Defense Trade Controls; failure to provide proof of registration will disqualify an offer. The knives must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization adhering to RP001 guidelines, and no ozone-depleting chemicals may be used in any component or process. Delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at the destination, and the delivery window is 153 days from award. The contract is issued under DLA Direct, CONUS coverage, with a unit of issue of each, and the total estimated value is based on the unit price applied to the full quantity.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
WINDOW, VEHICULAR
Solicitation # SPE7LX-26-U-9126
The contract pertains to the procurement of a vehicular window with NSN 2510-01-566-5005 and part number 105F01553, issued under solicitation SPE7LX-26-U-9126 as a total small business set-aside. A quantity of 18 units is requested at a unit price of $18.00, with no variance allowed in delivery quantity. Delivery is required FOB origin within 89 days, with inspection and acceptance occurring at destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping with JA material, cushioning with GF material, and marking in accordance with MIL-STD-129 using special code 36 to indicate “Fragile, arrow up and glass.” All packaging and handling requirements are governed by DLA’s procedural guidelines, which reference the DLA Master List of Technical and Quality Requirements for all technical and quality stipulations identified by R or I numbers. The solicitation is managed by the Department of Defense’s Strategic Acquisition Program Directorate and is open for response through the DIBBS portal with a deadline in August 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
GEAR, BEVEL
Solicitation # SPE7LX-26-U-9127
The contract is for the procurement of a bevel gear with NSN 3020-01-363-8103 and part number 2234E1201, supplied under solicitation SPE7LX-26-U-9127 as a total small business set-aside under NAICS code 333613. A total of 23 units are required at a unit price of $23.00, with a total contract value of $529.00, and delivery is required within 120 days to the origin point under FOB origin terms with no variance allowance in quantity. Packaging must comply strictly with MIL-STD-2073-1E using preservation method 33, heat-sealed barrier bags for cleanliness, and labeling per MIL-STD-129 with special marking code 24 indicating the item is open for inspection or use. Packaging requirements also follow DLA’s RP001, including intermediate containment of eight units per container, edge and corner damage protection with cushioning material, and palletization standards. All technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements referenced in the document, and inspection and acceptance occur at the destination. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, and the point of contact is Theodore Misiolek of the Strategic Acquisition Program Directorate within the Department of Defense.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332996
New
DIBBS
PLUG, PIPE, MAGNETIC
Solicitation # SPE7LX-26-U-9122
This contract specifies the procurement of 2,092 units of a magnetic plug and pipe component identified by NSN 4730-01-391-0769 and part number 1850T 124, classified as a commercial item and critical application product intended for use in heavy vehicle systems. The item must be delivered within 87 days FOB origin with zero variance allowed in quantity, and it is subject to strict packaging and marking requirements under MIL-STD-2073-1E and MIL-STD-129, including special labeling for magnetized materials to comply with military and commercial air transport regulations. Packaging must follow DLA’s procurement standards, with items palletized per RP001, packed in units of 100 per intermediate container, and marked with the special code ZZ for additional requirements. The contract is a total small business set-aside under NAICS code 332996, issued by the Department of Defense’s Strategic Acquisition Program Directorate under solicitation SPE7LX-26-U-9122, with a response deadline in August 2026. Inspection and acceptance will occur at the destination, and the delivery is managed under DLA Direct CONUS coverage with an estimated quantity not guaranteed for full purchase.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, SHELF
Solicitation # SPE7LX-26-U-9129
The contract is for the procurement of 163 units of a shelf bracket identified by NSN 5340-01-623-7394 and part number SB3422R, issued under solicitation SPE7LX-26-U-9129 with a delivery deadline of 116 days from award. The item is covered under DLA Direct, CONUS, with a fixed unit price and total price based on the exact quantity ordered, and no variance is permitted in the delivered quantity. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951, and must follow MIL-STD-129 for marking and labeling. Palletization and packaging are governed by RP001, and if the item is classified as hazardous under FED-STD-313, it must be packaged in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The contract references DLA’s official resources for unit of issue conversions and technical compliance, and all requirements are binding regardless of any conflicting commercial practices. The solicitation was posted in August 2026, with responses due two weeks later, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
VENTILATOR, AIR CIRC
Solicitation # SPE7LX-26-U-9123
The contract specifies the procurement of 188 units of a ventilator for air circulation with NSN 2540-01-576-7334 and part number 22-72184-000 under solicitation SPE7LX-26-U-9123, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 80 days at FOB origin with no tolerance for quantity variance, meaning exactly 188 units must be provided. Inspection and acceptance occur at the destination, and the equipment must be packaged in strict compliance with DLA’s packaging requirements referenced as RP001, including MIL-STD-129 labeling and palletization standards. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards like ASTM D3951. If the item is classified as hazardous under FED-STD-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging aligned with DLA requirements applies. The procurement is a Total Small Business Set-Aside under NAICS code 336390, and the contract mandates complete removal of government identification from non-accepted supplies. The sole point of contact is Theodore Misiolek, with a response deadline of August 17, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
Supply of Pre-Bent Aluminized Exhaust TubingThe contract requires the manufacture and delivery of 35 units of aluminized exhaust tubing meeting precise technical specifications: each unit must have a 3-inch outer diameter and a 16-gauge wall thickness, with a pre-bent 45-degree angle and a unique end configuration featuring four slots on one end and a plain end on the other. The part is identified by JLG part number 6600102 and NSN 2990-01-291-5879, ensuring alignment with defense supply standards. The work falls under NAICS code 332999 for other fabricated metal product manufacturing, and the contract is structured as a subcontract under the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on July 31, 2026, with responses due by August 5, 2026, offering a five-day window for submissions. Although no set-aside classification or specific geographic performance location is detailed, the contract is managed through the Defense Logistics Agency’s DIBBS platform, indicating a federal procurement process governed by defense supply chain protocols. The absence of a point of contact or detailed office address suggests reliance on the official DIBBS portal for communications and submission, and all deliverables must comply with the specified part numbers and structural requirements without deviations.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-8847
The contract involves the procurement of 69 retainer, packing units under National Stock Number 5330-00-508-7949, issued as a solicitation by the Defense Logistics Agency’s Strategic Acquisition Program Directorate under solicitation number SPE7LX-26-U-8847. It is structured as a Unilateral Indefinite Delivery Contract with a one-year period and a maximum value of $350,000, containing a guaranteed minimum quantity of 10 units. The acquisition is a total small business set-aside under NAICS code 339991, with responses due by July 31, 2026, and submissions required exclusively through the DLA Internet Bid Board System. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with export-controlled technical data subject to ITAR or EAR regulations, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 Type II Class C standards, utilizing opaque, waterproof, greaseproof bags for UV-sensitive items, and applying machine-readable barcoding as mandated. Preservation requires a dry, non-gas environment, and hazardous materials must be labeled per 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets required prior to award. Asbestos is prohibited per FED-STD-313, and ocean shipments must use U.S.-flag vessels unless waived. Cybersecurity compliance is mandated at CMMC Level 2, requiring implementation of NIST SP 800-171 controls and adherence to the DFARS 252.204-7012 clause for safeguarding covered defense information and reporting cyber incidents. Inspection and acceptance occur at destination under MIL-STD-1916 or ASQ H1331 sampling, with zero non-conformances required for critical attributes and acceptable quality levels set at 0.1 for critical, 1.0 for major, and 4.0 for minor defects. Invoicing must be submitted through WAWF, and payment administration will be processed via DoDAAC codes specified in the final award. No formal evaluation factors or
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336390
New
DIBBS
PIPE, EXHAUST
Solicitation # SPE7LX-26-U-8595
The contract specifies the procurement of aluminumized exhaust tubing with a 3-inch outer diameter and 16-gauge wall thickness, pre-bent at a 45-degree angle and featuring four slots on one end while the other end remains plain. This is a critical application item identified by JLG Industries, Inc. part number 6600102 and NSN 2990-01-291-5879, with a required quantity of 35 units. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The item is classified as a DLA Direct, CONUS coverage item with no variance allowed in quantity and delivered FOB origin. Inspection and acceptance occur at the destination after a 76-day delivery window. Packaging must be palletized per RP001 and labeled in accordance with specified guidelines, with the unit of issue as each and a fixed unit price of $35.00, resulting in a total value of $1,225.00. The solicitation is issued under contract number SPE7LX-26-U-8595 with a response deadline of July 23, 2026, managed by the Department of Defense’s Strategic Acquisition Program Directorate, and all requirements must be met without exception, including the removal of government identification from non-accepted supplies.
Other Motor Vehicle Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-8846
This contract is for the procurement of 72 O-Rings with NSN 5331-00-930-3041 under a Small Business Set-Aside solicitation, issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. The solicitation, numbered SPE7LX-26-U-8846, was posted on July 16, 2026, with responses due by July 31, 2026, and is structured as an Indefinite Delivery Contract valid for one year with a maximum value of $350,000 and a guaranteed minimum order of 10 units. The O-Rings must conform to SAE AS3582 Revision D dated September 1, 1996, and SAE AMS3304J Revision J dated April 1, 2019, with all items manufactured after the solicitation date required to meet the current revision of these standards. Technical and quality requirements referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, and supply chain traceability documentation must be retained per DLA Procurement Note C03. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling such as “Do not bend” and sealing in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II, Class C, Style 1 to protect against UV degradation. The contractor must comply with strict material prohibitions: no ozone-depleting chemicals, no asbestos, and no hexavalent chromium; substitutes require formal approval. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 Table 1, with acceptance requiring zero non-conformances unless otherwise specified, and attributes are evaluated at critical, major, or minor levels based on AQL standards. Delivery is FOB origin within the continental United States with a 78-day ADO schedule, and payment must be processed electronically via Wide Area Workflow (WAWF) using DFARS-mandated procedures. The contractor must validate all representations in the System for Award Management, affirm compliance with cybersecurity standards including NIST SP 800-171 and DFARS 252.204-7012, and ensure no covered telecommunications equipment from prohibited Chinese entities is
Gasket, Packing, and Sealing Device Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details