Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GASKET

Active
SPE7L4-26-U-1241Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE7L4-26-U-1241 and issued by the Department of Defense LSO Combat Vehicles and Armament, is for the procurement of 119 gaskets under NSN 5330-01-057-0892. The contract is designated as a total small business set-aside under NAICS code 339991. The delivery requirement is set for 97 days after the order is received. The procurement is subject to specific technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Notably, the item must contain no asbestos as defined in FED-STD-313. Quotations for this unilateral indefinite delivery contract were due by September 24, 2026, with the primary point of contact being Heather Kessler.

General Info

DoD small business set-aside for 119 asbestos-free gaskets due September 24, 2026.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(1)

SPE7L4-26-U-1241 RFQ

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUSA
Contacts
HEATHER KESSLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5330-01-057-0892 Quantity: 119 EA Purchase Request: 1000242667QTY: 119 Delivery: 97 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
Supply of Critical Application Gaskets (NSN 5330-01-483-8638)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L3-26-T-084A
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7M5-26-U-0065
Solicitation SPE7M5-26-U-0065 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 3,182 spiral wound gaskets under NSN 5330-00-348-9152. This is a total small business set-aside under NAICS code 339991, structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The delivery requirement is 63 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including RA001, RP001, and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved JCP certification and specific DLA training. Additionally, the item must be free of asbestos per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Quotes are due by September 11, 2026, via the DIBBS portal, and must not utilize additive manufacturing unless specifically authorized.
ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
COUPLING, FLEXIBLE
Solicitation # SPE4A7-26-R-0778
Solicitation SPE4A7-26-R-0778 is an Indefinite Quantity Contract issued by DLA Aviation for the procurement of Flexible Couplings (NSN 1660-00-560-4009), identified as a Critical Application Item. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. Delivery is required 365 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is a Firm Fixed Price agreement and allows for approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for Source Approval Requests, tailored higher-level quality requirements, and CMMC Level 2 self-assessment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-05J4
Solicitation SPE7L1-26-T-05J4 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 242 O-rings (NSN 5331-01-338-7343). The requirement is under NAICS code 339991, with a need ship date of February 2, 2027, and an original required delivery date of March 1, 2027. Delivery is FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict quality and material standards, including a total prohibition of asbestos and Class I ozone-depleting chemicals. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129 and MIL-P-4861. Contractors must maintain supply chain traceability documentation and adhere to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations are due by September 11, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STRIP
Solicitation # SPE7LX-26-U-9818
Solicitation SPE7LX-26-U-9818 is a total small business set-aside issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of nonmetallic strip seals, identified by NSN 5330-01-366-1066. The requirement is for an estimated quantity of 201 units and may result in a one-year indefinite delivery contract with a maximum value of 350,000.00 dollars. Delivery is required within 71 days after the order is received, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the items must be free of asbestos and intentionally added mercury. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges. Payment processing is managed through the Wide Area Workflow system. The procurement also incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding under DFARS 252.204-7012.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-264X
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-361N
This solicitation issued by the Defense Logistics Agency under the Department of Defense concerns the procurement of 13,964 O-Rings, identified by NSN/Part Number 5331-00-250-0224. The procurement is managed under solicitation number SPE7M4-26-T-361N and is categorized as a federal solicitation. The solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties can access further details and submit responses through the official DIBBS procurement portal. This contract is intended to fulfill specific logistical requirements for the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL ASSY, MAGNETIC
Solicitation # SPE7L3-26-T-217N
This contract solicitation, identified as SPE7L3-26-T-217N, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 65 units of Magnetic Shaft Seal Assemblies, part number 91082 from Magnetic Seal LLC. The item is classified under NSN 5330-01-357-6393 and is designated as a critical application item. The procurement is a total small business set-aside under NAICS code 339991, with a required delivery date of June 7, 2027, and a delivery timeframe of 115 days after order. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, the contract explicitly prohibits the use of asbestos as defined in FED-STD-313. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-237G
Solicitation SPE7L3-26-T-237G is a request for quotations issued by DLA Land and Maritime for the procurement of 407 units of preformed packing, identified by NSN 5330-00-922-5947. The requirement is open for full and open competition, with quotes due by September 21, 2026. Delivery is expected by January 17, 2027, with a need ship date of September 10, 2026. The items must be free of asbestos and adhere to a non-extendable shelf life of 180 months. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special requirements include oxygen clean packaging (IP042) and hazardous materials shipping (IP025). Offerors must comply with the Buy American Act and the Berry Amendment, and those seeking the HUBZone price evaluation preference must be SBA-certified. Payment will be processed electronically via the Wide Area WorkFlow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and various FAR and DFARS clauses regarding cybersecurity, safeguarding of defense information, and the prohibition of certain telecommunications equipment.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-168M
The contract solicitation SPE7L3-26-T-168M seeks six gaskets identified by NSN 5330-01-483-8638 and part number 3798661-1 from Sargent Aerospace & Defense, LLC, designated as a critical application item with a non-extendable shelf life of 180 months, requiring at least 85 percent of that shelf life to remain upon delivery. The gasket must be free of asbestos and compliant with technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Mercury and mercury-containing compounds are prohibited in direct contact with the item unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and possess a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, with preservation method 33, cleaning/drying method 1, and no preservation or cushioning materials. Marking must comply with MIL-STD-129, including special marking code 32 for shelf-life items, and hazardous materials must be labeled under the Hazard Communication Standard (29 CFR 1910.1200), with exceptions noted for items governed by other federal statutes. Delivery is required within 165 days of order receipt, FOB origin, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Electronic invoicing via WAWF is mandatory with both invoice and receiving report submissions unless an exception applies. The contractor must validate representations in SAM, including small business and socio-economic status, and certify compliance with prohibitions on covered defense telecommunications equipment, hexavalent chromium, and acquisition from Communist Chinese military companies. Cybersecurity obligations include adherence to NIST SP 800-171 requirements and safeguarding covered defense information with incident reporting procedures. Whistleblower rights, restriction on mandatory arbitration, and disclosure of information clauses are all incorporated without deviation, except for several FAR and DFARS clauses which include specific deviations effective February and March
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
Federal
Specialized Component Supply (Gaskets & Seals)
NASA Johnson Space Center

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 332994
New
DIBBS
RANGE PLATE RH
Solicitation # SPE7L4-26-T-6580
Solicitation SPE7L4-26-T-6580, issued by the DLA Land and Maritime LSO Combat Vehicles and Armament, is a request for quotations for the procurement of eight Range Plate RH units, identified by NSN 1010015859888. The required delivery date is January 25, 2027, with a delivery period of 138 days. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to several stringent technical and regulatory requirements, including CMMC Level 2 Self-Assessment for cybersecurity and specific demilitarization standards for small arms weapons and parts under Category I Munitions List Items. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Additionally, the contract incorporates the Buy American Act and Berry Amendment for domestic material restrictions. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336340
New
DIBBS
SPIDER, BRAKE
Solicitation # SPE7L4-26-U-1163
Solicitation SPE7L4-26-U-1163 is a total small business set-aside issued by the Defense Logistics Agency for the procurement of brake spiders, specifically part number TDAA33211C5827 with NSN 2530-01-578-2449. The requirement is for an estimated quantity of 4 units with a contract maximum value of 350,000.00 dollars. This acquisition may result in a one-year indefinite delivery contract below the simplified acquisition threshold. Delivery is required within 75 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for marking and labeling and RP001 for palletization. Hazardous materials must be packaged per TQ requirement IP025 and FED-STD-313, while non-hazardous items follow ASTM D3951. Use of Class I ozone-depleting chemicals is prohibited, and additive manufacturing is not authorized without specific approval. Invoicing must be processed through the Wide Area Workflow system. The award will be based on price quotes submitted via the DIBBS portal, and the procurement is subject to the Buy American Act and Berry Amendment restrictions.
Motor Vehicle Brake System Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332994
New
DIBBS
RANGE PLATE LH
Solicitation # SPE7L4-26-T-6584
Solicitation SPE7L4-26-T-6584 is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime under the LSO Combat Vehicles and Armament office. The procurement is for 13 units of Range Plate LH, identified by NSN 1010015865356. The required delivery date is June 3, 2027, with a delivery period of 267 days. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract includes stringent technical and security requirements, including CMMC Level 2 Self-Assessment and the application of Covered Defense Information protocols. The items are subject to demilitarization requirements for small arms weapons and accessories under Category I of the Munitions List. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Palletization must follow RP001 standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American and Balance of Payments Program. Quotations were due by September 8, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336360
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE7L4-26-T-6676
Solicitation SPE7L4-26-T-6676 is a fixed-price request for quotations issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of two vehicular structural support components (NSN 2540-01-644-0275). The delivery is required by January 19, 2027, with a need ship date of January 5, 2027, shipping FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to origin inspection, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The contract imposes strict technical and regulatory requirements, including DLA packaging standards (RP001), MIL-STD-129 marking, and the removal of government identification from non-accepted supplies (RQ011). Technical data is subject to ITAR or EAR export controls (RQ032), and contractors must meet CMMC Level 2 self-assessment or third-party certification requirements. Additionally, the solicitation emphasizes compliance with the Buy American Act and the Berry Amendment. Award evaluation may include a price preference for certified HUBZone small businesses, and all quotes must be submitted via the DIBBS portal. Invoicing and payment will be processed through the Wide Area WorkFlow (WAWF) system.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336350
New
DIBBS
CONTROL ASSEMBLY, TRANS
Solicitation # SPE7L4-26-U-1165
Solicitation SPE7L4-26-U-1165 is issued by DLA Land and Maritime LSO Combat Vehicles and Armament for the procurement of transmission control assemblies, identified by NSN 2520-01-593-8650 and TLD Wollard LLC part number 47379. This is a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The procurement includes a guaranteed minimum quantity of 2 units, a minimum delivery order quantity of 4 units, and an estimated annual quantity of 18 units. Delivery is required within 81 days after receipt of order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Hazardous materials must be labeled according to the Hazard Communication Standard and packaged per TQ requirement IP025. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and the use of additive manufacturing is prohibited unless specifically authorized. All quotes must be submitted via the DLA Internet Bid Board System.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336390
New
DIBBS
Supply of Vehicle Window Regulators (NSN 2540-01-587-7536)
Other Motor Vehicle Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 316210
New
DIBBS
Supply of Brake Shoes (NSN 2530-21-906-4393)
Footwear Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339999
New
DIBBS
Nonmetallic Hose Assembly Supplier (NSN 4720-01-548-7272)
All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 325412
New
DIBBS
Supply of Centrifugal Brake Shoes (NSN 3040997213621)
Pharmaceutical Preparation Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336330
New
DIBBS
25--BRAKE SHOE
Solicitation # SPE7L4-26-U-1246
Solicitation SPE7L4-26-U-1246 is a request for quotations issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of brake shoes identified by NSN 2530219064393. This procurement is structured as a unilateral Simplified Indefinite-Delivery Contract (SIDC) with a maximum aggregate value of 350,000.00 dollars and a term of one year. The estimated annual demand is 117 units, with a guaranteed minimum quantity of 17 units and an expected average of two orders per year. The approved source for this item is 7R1P5 244-8141. Quotes must be submitted electronically via the DIBBS portal by September 25, 2026. The award will be granted to a responsible offeror based on the price quoted for the estimated annual demand. Delivery is required within 75 days after award, with terms set as FOB Origin. Inspection and acceptance will occur at the destination. The contract requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, contractors must adhere to domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area WorkFlow system for all invoicing and payment requests.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
25--REGULATOR,VEHICLE WIND
Solicitation # SPE7L4-26-U-1247
Solicitation SPE7L4-26-U-1247 is a request for quotations issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of vehicle window regulators under NSN 2540015877536. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual quantity is 309 units, with a guaranteed minimum quantity of 46 and a minimum delivery order quantity of 77 units. Approved sources include Oshkosh Defense LLC and Hansen International Inc. Quotes must be submitted electronically by September 25, 2026. The contract requires delivery to various CONUS and OCONUS DLA Depots with a delivery timeline of 80 days after order. Packaging must adhere to ASTM D3951 and RP001 standards, while marking and labeling must comply with MIL-STD-129. Inspection and acceptance will occur at the destination. Contractors are required to use the Wide Area WorkFlow system for invoicing and must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. Additionally, the contract incorporates specific cybersecurity requirements under DFARS 252.204-7012 and various FAR clauses regarding trafficking in persons and hazardous material identification.
Other Motor Vehicle Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336350
New
DIBBS
30--BRAKE SHOE,CENTRIFUGAL
Solicitation # SPE7L4-26-U-1244
Solicitation SPE7L4-26-U-1244 is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of centrifugal brake shoes (NSN 3040997213621). The requirement is for an estimated annual quantity of 28 units, though the contract may result in an Automated Indefinite Delivery Contract (IDC) with a guaranteed minimum of 4 units. The contract term is one year or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. Quotes must be submitted electronically by September 25, 2026, and should be based on FOB Origin terms. The procurement is conducted under the First Destination Transportation program, with items shipping to various CONUS and OCONUS DLA Depots. Compliance with MIL-STD-129 for marking and RP001 for palletization is required, and the approved source is identified as K3602 5520-5701. Inspection and acceptance will occur at the destination. Contractors must utilize the Wide Area Workflow system for invoicing and payment. Additionally, the contract mandates adherence to the Buy American Act, the Berry Amendment for materials exceeding 150,000 dollars, and NIST SP 800-171 cybersecurity assessment requirements. Parts produced via additive manufacturing are prohibited unless specifically authorized.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS