Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Gasket Supply and Compliance Packaging

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the supply of 40 units of a specific gasket identified by NSN 5330012098030, with all items required to meet military-compliant packaging and labeling standards. Delivery must be completed by November 18, 2026, to the Defense Logistics Agency location in San Joaquin, California. The contractor is responsible for providing full hazardous materials documentation in accordance with applicable regulations and must submit electronic invoices through the Wide Area WorkFlow system. The contract falls under NAICS code 332994 and is classified as a subcontract within the Department of Defense procurement structure, with the Defense Logistics Agency serving as the overseeing agency. All requirements are strictly enforced to ensure interoperability, safety, and logistical compliance within federal supply chains.

General Info

Supply 40 NSN 5330012098030 gaskets to San Joaquin, CA by Nov 18, 2026, with military packaging, hazmat docs, and e-invoicing.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-251L.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GASKET

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 40 units of a gasket (NSN: 5330012098030) with military-compliant packaging, labeling, and delivery to DLA San Joaquin, CA by November 18, 2026. Includes hazardous materials documentation and electronic invoicing via WAWF.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7L1-26-T-966D

This contract, solicitation number SPE7L1-26-T-966D, is for the procurement of 275 units of front sights, identified by NSN 1005-01-689-7880 and Heckler & Koch Defense Inc. part number 51000246. The requirement is designated as a critical application item and is set aside for total small business. Delivery is required within 452 days, with an original required delivery date of August 12, 2026, and a need ship date of November 20, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing supply chain traceability documentation and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. Inspection and acceptance will take place at the destination. The procurement is managed by the Department of Defense Land Supply Chain agency under NAICS code 332994.

LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

CLEVIS, ADJUSTABLE

Solicitation # SPE4A7-26-T-669Z

This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of 60 adjustable clevises, identified by NSN 5342-01-166-0578. The contract requires delivery within 170 days after the order is placed and specifies that all items must adhere to DLA packaging requirements for procurement. Due to the nature of the technical data involved, this contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required DOD export-controlled technical data training and questionnaire. Performance of this contract will take place in New Cumberland, Pennsylvania.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

COUPLING, CLAMP, GROOVED

Solicitation # SPE4A7-26-T-694Z

This contract is for the procurement of 30 units of grooved clamp couplings, identified by NSN 5342-01-132-0673 and part number 7M765-20D. The item is designated as a critical application item and is source-controlled, requiring strict adherence to McDonnell Douglas Corporation drawing 7M765, Revision L. Hydraflow is listed as an approved source for this component. The agreement specifies a delivery timeframe of five days and requires shipping to the Commanding Officer of 7 CFSD in Edmonton, Alberta, Canada. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. The contract incorporates DLA master technical and quality requirements, including specific protocols for configuration change management and physical item marking.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L3-26-U-0680

This Request for Quotations (RFQ) issued by DLA Land and Maritime is for a fixed-price, unilateral Simplified Indefinite-Delivery Contract (SIDC) to procure 74 gun mounts (NSN 1005-01-323-7552). The contract has a maximum value of $350,000 and is subject to a Service-Disabled Veteran-Owned Small Business (SDVOSB) and Small Business set-aside cascade. Deliveries are required within 217 days after order acceptance, with terms set at FOB Origin. The procurement is governed by strict technical and quality standards, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. All items must be manufactured in accordance with specific Technical Data Package (TDP) Rev B Gen 2 reference drawings. The contract includes rigorous compliance requirements regarding cybersecurity, export control, and domestic sourcing. Contractors must adhere to Cybersecurity Maturity Model Certification (CMMC) Level 2 standards and safeguard covered defense information. Technical data is subject to ITAR or EAR export controls, requiring approved US/Canada Joint Certification Program (JCP) certification for access. Furthermore, offerors must comply with the Berry Amendment, the Buy American Act, and other domestic material restrictions. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS).

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

MOUNT, RESILIENT, WEA

Solicitation # SPE4A7-26-T-660T

Solicitation SPE4A7-26-T-660T is a fixed-price request for quotations issued by DLA Aviation for the procurement of seven resilient weapon system mounts, identified as critical application items. The required hardware corresponds to NSN 5342006850612 and part number K1092-1/02 from Hutchinson Aerospace & Industry, Inc. This acquisition is a total small business set-aside under NAICS code 332994. The delivery timeline is set for 171 days after order, with a need ship date of February 12, 2027, and an original required delivery date of July 17, 2027. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to quality and security standards, including a CMMC Level 2 self-assessment and compliance with the Buy American Act and Berry Amendment. Packaging must follow ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, hazardous material identification, and the prohibition of covered defense telecommunications equipment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

REPAIR RECOIL ADAPT

Solicitation # SPE7L3-26-T-205R

This contract, solicitation number SPE7L3-26-T-205R, is for the repair of recoil adapters, specifically NSN 1090-01-735-8193, with a total quantity of 56 kits. The requirement is issued by the Department of Defense under the Land Supplier Operations Vehicle Support agency. Delivery is required within 170 days, with a need ship date of February 26, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and demilitarization standards for small arms weapons and parts. It prohibits the use of Class I ozone-depleting chemicals and specifies that surplus items are not acceptable. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, and palletization must follow DLA packaging requirements. Item Unique Identification is not required for this specific order.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

RING, CABLE SEAL RES

Solicitation # SPE4A7-26-T-658V

Solicitation SPE4A7-26-T-658V is a request for quotations issued by DLA Aviation for the procurement of 231 packages of Ring, Cable Seal Restraining, identified by NSN 5342-00-084-0375. This item is designated as a critical application item and is identified as a commercial product. The unit of issue has been updated to five units per pack. Technical specifications are governed by TDP Rev B Gen 2, specifically basic drawing NR 81205 BACS11L Revision G and reference drawing NR 81205 D-590 Revision F. Delivery is required at the DLA Distribution Depot in Tinker AFB, Oklahoma, with a need ship date of February 12, 2027, and an original required delivery date of May 9, 2027. The contract mandates strict quality and compliance standards, including manufacturer inspection systems that comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with zero non-conformances required for acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization follows RP001. The solicitation includes significant regulatory requirements, such as CMMC Level 2 certification, ITAR and EAR export controls for technical data, and compliance with the Buy American Act and Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Offers involving additive manufacturing are ineligible for award unless specifically authorized.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-694Y

This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of one lower latch, identified by NSN 5342-01-217-3259. The contract requires delivery within 20 days after receipt of the order. The solicitation number is SPE4A7-26-T-694Y, with a response deadline of September 3, 2026. The agreement is subject to strict technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the contract involves covered defense information and requires CMMC Level 2 certification. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, meaning access is limited to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-665N

Solicitation SPE4A7-26-T-665N is a fixed-price request for quotations issued by DLA Aviation for the procurement of 145 units of a resilient weapon system mount, identified as NSN 5342-01-405-9950. This item is classified as a critical application commercial item and must be manufactured according to Naval Air Systems Command Drawing 1935AS456. The required delivery date is May 11, 2027, with a need ship date of February 12, 2027, and a delivery timeframe of 171 days after order. Delivery is FOB destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-129 for marking and RP001 for packaging. Inspection and acceptance will occur at the destination, utilizing sampling methods from MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to Buy American Act and Berry Amendment domestic sourcing restrictions. The solicitation is not a small business set-aside and falls under NAICS code 332994.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

RETAINER, ROD END LOCKI

Solicitation # SPE7M4-26-T-366X

This contract is for the procurement of 69 units of rod end locking retainers, identified as part number NAS1193K5C and NSN 5340-00-915-2368. This is a critical application item classified as a commercial product, subject to full and open competition. The order is managed by the Department of Defense Fluid Handling Division, with delivery required at DLA Distribution San Diego. The delivery timeline is set for 156 days after order, with a need date of February 12, 2027. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-PRF-23199E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Additionally, the contract enforces a strict mercury-free requirement, prohibiting the intentional addition of mercury or mercury compounds in the hardware, preservation, or packaging.

FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

HINGE HALF, LOWER

Solicitation # SPE4A7-26-T-694S

This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of three lower hinge halves under part number 5342-01-226-1055. The contract requires delivery within 86 days after receipt of order and is categorized under NAICS code 332994. Performance is centered in New Cumberland, Pennsylvania, with the primary point of contact being Keyanna McNeil-Johnson. The agreement is subject to rigorous technical and quality standards as defined in the DLA Master List, including specific requirements for packaging, source approval, and configuration change management. Notably, the contract mandates compliance with CMMC Level 2 certification and strict export controls under ITAR and EAR regulations. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-controlled training.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

BRUSH, CLEANING, ARTI

Solicitation # SPE7L1-26-T-968K

This solicitation, identified as SPE7L1-26-T-968K, is issued by the Department of Defense Land Supply Chain for the procurement of 45 units of 120mm cleaning and bore brushes under NSN 1015-01-583-3785. The contract requires delivery within 120 days after the order is received and specifies performance in Bremerton, Washington. The agreement is subject to rigorous technical and quality standards, including CMMC Level 2 cybersecurity assessments and strict adherence to DLA packaging and marking requirements. Because the items fall under Category I munitions, the contract mandates specific demilitarization protocols and strict export controls under ITAR and EAR regulations. Additionally, the supplier must comply with qualified products and manufacturers lists and ensure that all technical data is handled according to US/Canada Joint Certification Program standards.

LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4966

This contract is for the procurement of sealed, gel cell, non-spillable lead-acid storage batteries under NSN 6140004320490. The total requirement consists of 24 units distributed across four separate line items for delivery to various locations, including Fort Stewart, GA, Hurlburt Field, FL, Tampa, FL, and JB Andrews, MD. All items are designated as critical application items with a non-extendable shelf life of 15 months. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Suppliers must comply with hazardous material regulations, including the submission of Safety Data Sheets and HCS labels in accordance with OSHA and Federal Standard 313-E. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in preservation and packaging. Delivery is required within 20 days, with shipping performed via fastest traceable means.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-228U

This contract, identified as SPE7MC-26-T-228U, is a solicitation by the Defense Logistics Agency for the procurement of one check valve, identified by NSN 4820016194206. The item is a critical application component with associated part numbers from The Entwistle Company LLC (KT-5065-23) and Bonney Forge Valve (L1-48L-RF 316SS). Delivery is required within 20 days of order, with a final required delivery date of August 13, 2026, shipped FOB destination to the USS Zumwalt DDG 1000. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and prohibits the use of Class I ozone depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Shipment must be made via the fastest traceable means, explicitly prohibiting the use of parcel post.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-26-T-2595

This solicitation, issued by the Defense Logistics Agency under number SPE8ES-26-T-2595, is for the procurement of one 50 milliliter bottle of sealing compound, identified by NSN 8030-01-662-8577. The contract requires delivery within 20 days after the order is placed and specifies that the product must be labeled according to MIL-STD-129, including the lot or batch number. Performance is designated for North Charleston, South Carolina. The agreement incorporates strict technical and quality requirements from the DLA Master List and mandates compliance with DLA packaging standards. Because the material is a chemical compound, suppliers must adhere to the Hazard Communication Standard by submitting Safety Data Sheets and HCS labels for approval prior to the award. Additionally, the contract notes that covered defense information potentially applies and requires the removal of government identification from any non-accepted supplies.

Wood Preservation

POSTED

about 6 hours ago

DEADLINE

REPAIR KIT, VALVE

Solicitation # SPE7MC-26-T-228Y

This contract is for the procurement of one valve repair kit, identified by NSN 4810-01-738-1937 and associated with Emerson Automation Solutions part numbers MNM90039005 and SA-E-402054. The item is designated as a critical application item and must be delivered to the USS Hartford within 20 days after the order is placed. The required delivery date is August 13, 2026, and the shipment must be sent via the fastest traceable means. Strict environmental and quality compliance is required, specifically prohibiting the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds. The contractor must adhere to DLA packaging requirements, MIL-STD-2073-1 for kit packaging, and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for approval.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-229B

This contract is for the procurement of two 1-inch check valves with a working pressure of 300 PSI, identified by NSN 4820010809568. The items are associated with Admiral Valve LLC part numbers 36PL NO 3924 and A-9647-1IN. The order is issued by the Defense Logistics Agency for delivery to the USS Roosevelt DDG 80, with a required delivery date of April 16, 2025, and a delivery window of 20 days. The agreement mandates strict adherence to DLA packaging requirements (RP001), MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the shipment is designated as a vessel shipment.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

VALVE, LINEAR, DIRECT

Solicitation # SPE7MC-26-T-228A

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one linear directional control valve, part number PC50430-500, manufactured by Curtiss-Wright Flow Control Corporation. The item is identified by NSN 4810-01-455-4998 and is destined for the USS Makin Island LHD 8. Delivery is required within 20 days, with a required delivery date of August 24, 2026. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes specific environmental restrictions prohibiting the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Shipping must be handled via the fastest traceable means to the designated vessel shipment address, and inspection and acceptance will occur at the destination.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2170

This contract is for the procurement of 180 feet of aluminum alloy 2024 T-351 metal bar, featuring a cold finish and a square profile measuring 2.000 inches across flats. The material must be supplied in whole foot lengths between 10 and 12 feet, with a weight of 4.800 lbs per foot. Compliance with various technical standards is required, including SAE AMS-QQ-A-225/6B, ASTM B660, and ASTM B666. A Certificate of Quality Compliance must accompany every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates strict marking requirements, including the DLA contract delivery order number, NSN, and manufacturer details, using waterproof stamping or stenciling. Delivery is set for 20 days after order, with the destination being Barksdale AFB, Louisiana. Packaging and preservation must adhere to MIL-STD-2073-1E and RP001 requirements.

Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4969

This contract is for the procurement of 30 sealed gel cell lead acid storage batteries, identified by NSN 6140-01-370-8677. The items must adhere to a non-extendable shelf life of 12 months and meet specific sampling standards in accordance with MIL-STD-1916 or ASQ H1331. Delivery is required within 20 days after the order, with FOB and inspection points set at the destination. The supplier must comply with DLA packaging and marking requirements, including MIL-STD-129 and RP001 for palletization. Additionally, the contract mandates strict adherence to the Hazard Communication Standard, requiring the submission of Safety Data Sheets and compliant labeling per 29 C.F.R. 1910.1200. There is a general prohibition on the intentional addition of mercury, except where functionally required for battery operation.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

TIRE, PNEUMATIC, VEHICUL

Solicitation # SPE7L7-26-T-4705

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of pneumatic vehicular tires, specifically radial rock regular non-directional tires for scraper tractors. The requirements specify a total quantity of three units across two line items, restricted to Michelin North America, Inc. part number 76725. The tires must be tubeless with a maximum inflation of 73 PSI and a maximum load of 40,893 PSI. A critical requirement is the non-extendable shelf life of 72 months, with a minimum of 48 months remaining at the time of delivery. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-DTL-4, and prohibits the use of ozone-depleting chemicals. Delivery is required within five days after order to destination points at Fort A.P. Hill, Virginia, and Fort Knox, Kentucky. This is a total small business set-aside under NAICS code 326211, with required delivery dates set for August 2026.

Tire Manufacturing (except Retreading)

POSTED

about 6 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-26-T-4354

Contract SPE8E6-26-T-4354 is a solicitation issued by the Defense Logistics Agency for the procurement of identification markers, specifically part number Z-PSR3 from American Labelmark Company. The requirement consists of one package, which is equivalent to five individual units, under NSN 7690012797613. The items are subject to a non-extendable shelf life of 12 months and must adhere to specific shelf life marking and packaging standards, including MIL-STD-129 and MIL-STD-2073-1E. Delivery is set for 10 days after order, with the original required delivery date listed as August 24, 2026. The shipping destination is the US Army SSA in Powidz, Poland, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract incorporates DLA master technical and quality requirements and mandates the removal of government identification from any non-accepted supplies.

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3841

The contract solicitation for FLUX under SPE8E5-26-T-3841 seeks 10 units of the item identified by NSN 3439-01-619-5990 and part number RPPEN2005N, with delivery required at Fort Sill, Oklahoma, within 20 days of award. The procurement is governed by the Defense Logistics Agency and follows a fixed-price structure with FOB Origin terms, meaning risk and responsibility transfer to the government upon shipment. The item has no shelf-life requirement, but strict compliance with DLA packaging requirements (RP001), ASTM D3951-15 packaging standards, and MIL-STD-129 for labeling and marking is mandatory, including application of a 2D barcode Unique Item Identifier (UII) and Material Status Label (MSL) at all packaging levels. Hazardous material labeling and safety data submission per OSHA 29 CFR 1910.1200 and MIL-STD-129 must be provided before award. Inspection and acceptance occur at destination, with the government retaining full authority over conformance verification. Technical and quality requirements are incorporated by reference through the DLA Master List, including RA001, RD003, and RQ011, which govern acceptable products, covered defense information controls, and removal of government identifiers from non-accepted supplies. The solicitation references multiple FAR and DFARS clauses addressing equal opportunity, cybersecurity safeguards, trafficking in persons, employment verification, sustainable products, safeguarding covered defense information, and prohibitions on covered telecommunications equipment, many with deviations from standard language. Compliance with NIST SP 800-171 and DFARS 252.204-7012 is required, with cyber incident reporting obligations. Contractors must submit proposals electronically via the DIBBS portal by August 17, 2026, and provide their UEI and CAGE codes, along with size and socioeconomic status certifications, including any joint venture partnerships. Although the contract does not specify unit pricing, the total value remains undefined. Payment will be processed exclusively through WAWF using an Invoice and Receiving Report, and all deliveries must be palletized per DLAI MD00100452 Rev B. The contract includes provisions for accelerated payments to small business subcontractors and prohibits unauthorized obligations. No evaluation factors or award methodology are explicitly

Welding and Soldering Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-26-T-2649

This contract is for the procurement of red sealing compound, identified by NSN 8030-01-565-0423, with a total quantity of five bottles of 10 milliliters each. The item is subject to a non-extendable shelf life of 12 months and must comply with specific DLA packaging, marking, and shipping requirements, including MIL-STD-129 and RP001. Delivery is required within 20 days, with the destination and inspection point located in Norfolk, Virginia. Suppliers must adhere to the Hazard Communication Standard, which requires the submission of Safety Data Sheets and compliant labeling in accordance with 29 C.F.R. 1910.1200 prior to the award. The contract specifies that shipments must be sent via the fastest traceable means and prohibits the use of parcel post. Technical and quality requirements are governed by the DLA Master List, and the original required delivery date is set for August 28, 2026.

Adhesive Manufacturing

POSTED

about 6 hours ago

DEADLINE