This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Nonmetallic Hose Assembly Manufacturing and Supply

Closed

Federal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332994

New

DIBBS

BRUSH, CLEANING, ARTILLE

Solicitation # SPE7L1-26-T-04H9

This solicitation, identified as SPE7L1-26-T-04H9, is issued by the Department of Defense Land Supply Chain for the procurement of 31 units of 120mm artillery bore cleaning brushes under NSN 1015-01-583-3785. The contract requires delivery within 160 days after receipt of order and specifies performance in Bremerton, Washington. The agreement is subject to stringent technical and security requirements, including CMMC Level 2 certification and compliance with the DLA Master List of Technical and Quality Requirements. Key mandates include strict adherence to export controls under ITAR and EAR regulations, demilitarization protocols for small arms accessories, and specific packaging and marking standards. Additionally, the supplier must comply with configuration change management and may be required to provide components from Qualified Products or Manufacturers Lists.

POSTED

DEADLINE

COUPLING, CLAMP, GROOVED

Solicitation # SPE4A7-26-T-699R

This contract is for the procurement of 10 grooved clamp couplings, identified by NSN 5342-01-132-0673 and part number 7M765-20D. The item is designated as a critical application item and is source-controlled, requiring adherence to McDonnell Douglas Corporation drawing 7M765, Revision L. Hydraflow is listed as an approved source for this component. The agreement specifies strict quality and sampling standards in accordance with MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, following DLA packaging requirements. Delivery is set for 5 days after order, with the final destination being the Spanish Air Force in Madrid, Spain.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7L3-26-T-213Z

This contract is for the procurement of 305 units of a critical gun part identified as a hand gun guard. The item is classified as a defense article subject to International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. The procurement includes a restricted technical data package from Knights Armament Company, necessitating a signed license agreement and strict adherence to export control regulations for technical data. Key quality and compliance requirements include Contractor First Article Testing and potential Product Verification Testing, with inspections conducted by the DCMA QAR at the actual manufacturer's facility. The contractor must comply with CMMC Level 2 certification and specific DLA packaging and quality standards. Certificates of Conformance are not authorized for this item. Delivery is set for 382 days after order, and the contract prohibits the use of Class I ozone depleting chemicals.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-19YR

This contract is a solicitation for the procurement of 643 grooved, headed firing pins, identified by NSN 5315-12-376-8784. The items are associated with Heckler & Koch part numbers 235239 and 94629-200.04. The order is managed under purchase request 7017939058 with a delivery timeframe of 106 days after receipt of order, and a required delivery date of April 12, 2027. The agreement specifies that delivery is FOB Origin, while inspection and acceptance will occur at the destination. Shipping is directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance is required for DLA packaging requirements RP001, marking standards MIL-STD-129, and packaging data MIL-STD-2073-1E. Technical and quality requirements are governed by the DLA Master List, and the contract mandates the removal of government identification from any non-accepted supplies.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L4-26-T-6630

This solicitation, numbered SPE7L4-26-T-6630, is issued by the Department of Defense through the Defense Logistics Agency for the procurement of six cartridge extractors under NSN 1010-00-522-8060. The contract requires delivery within 237 days after receipt of order and specifies performance in Tracy, California. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with specific emphasis on packaging, origin inspection, and configuration change management. The contract includes stringent security and regulatory mandates, including CMMC Level 2 self-assessment and third-party assessment requirements. Because the items are categorized as small arms weapons parts, they are subject to demilitarization protocols and strict export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training. Additionally, components must adhere to Qualified Products Lists or Qualified Manufacturers Lists.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-700S

This solicitation is for the procurement of two weapon access doors under contract number SPE4A7-26-T-700S for the Department of Defense. The items must be produced using a metal casting process, which requires specific tooling. Technical specifications mandate precise datum alignments for the as-cast surface and a specific position width tolerance of .030 for the groove. Delivery is required within five days after receipt of order. Compliance requirements include CMMC Level 2 certification and adherence to DLA packaging and quality standards. Because the technical data is subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete required training to access the data. Sourcing and tooling assistance is available through the Aviation or Land and Maritime supply chain teams.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-04F4

This contract is for the procurement of 17 units of a rod end locking device retainer, identified by NSN 5340-01-289-5054 and part number NAS1193E6C. The items must be manufactured according to the current revision of the applicable part standard, with non-destructive testing performed per MIL-STD-271. The contract specifies a delivery timeframe of five days after the order and requires shipment to the Army Aviation Depot in Tainan City, Taiwan. Quality and compliance requirements are stringent, including adherence to MIL-STD-130N for marking and MIL-STD-2073-1E for packaging. The contract prohibits the use of Class I ozone-depleting chemicals and mandates sampling methods in accordance with MIL-STD-1916 or ASQ H1331. Because the item is classified as a critical application item that may require specific casting or forging tooling, the government provides a process for requesting technical assistance regarding tooling and materials.

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7L3-26-T-213P

This federal solicitation, issued by the Land Supplier Operations Vehicle Support agency under the Department of Defense, is for the procurement of 179 units of part number 0001S00000053. The contract requires a delivery timeline of 768 days after the order is placed and specifies that performance will take place in New Cumberland, Pennsylvania. The contractor is required to submit a Production Lot Test report to the Quality Assurance Representative for review. All shipments of these reports must be accompanied by specific documentation, including DD Form 1222, DD Form 250/iRAPT receiving reports, material and process certifications, and applicable test reports that verify actual results against the technical data package tolerances.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PLUG, ANODE RETAINING

Solicitation # SPE4A7-26-T-699S

This contract is for the procurement of 31 units of anode retaining plugs, identified by NSN 5342-01-515-2967 and part number 004398-01. The order is managed under purchase request 7018075838 with a delivery timeframe of 171 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the item is designated as a critical application item. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging, except where specifically authorized by NAVSEA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

COUPLING, CLAMP, GROOVED

Solicitation # SPE4A7-26-T-675Z

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A7-26-T-675Z for the procurement of 32 grooved clamp couplings. The items are identified by NSN/Part Number 5342-00-631-5956 and are associated with purchase request 7017917561. This federal solicitation was posted on August 18, 2026, and requires responses by the deadline of August 26, 2026. Interested parties can access further details and submission requirements through the DIBBS portal.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-04J1

This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 16 sniper rifle tripods under NSN 1005-01-702-7501. The contract is a total small business set-aside with a delivery requirement of 100 days after receipt of order. Performance will take place in New Cumberland, Pennsylvania, and the response deadline is September 8, 2026. The contract imposes strict compliance standards, including CMMC Level 2 certification and adherence to DLA master lists for technical and quality requirements. It includes specific mandates for demilitarization of small arms accessories, configuration change management, and the removal of government identification from non-accepted supplies. Furthermore, the project is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle technical data.

POSTED

DEADLINE

NUT, SELF LOCKING, HEXAG

Solicitation # SPE7L4-26-T-6627

This contract is a solicitation for the procurement of three self-locking hexagonal nuts, identified by NSN 1005-01-714-7385 and Northrop Grumman part number 465-4617-4. The order is issued by the Department of Defense under solicitation number SPE7L4-26-T-6627, with a required delivery date of August 27, 2026, and a delivery timeframe of five days after order. The items are to be shipped FOB Origin to a distribution point in Vilseck, Germany, using the fastest traceable means. The agreement mandates strict adherence to several regulatory and technical standards, including CMMC Level 2 self-assessment, Covered Defense Information protocols, and DLA packaging and marking requirements per MIL-STD-129 and MIL-STD-2073-1E. Additionally, the contractor must maintain supply chain traceability documentation and comply with demilitarization standards for small arms weapons and parts. Item Unique Identification is not required for this specific order.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the manufacture, testing, packaging, marking, and delivery of 7,000 nonmetallic hose assemblies identified by NSN 4720017076195, all in strict compliance with Defense Logistics Agency standards. This includes adherence to origin inspection protocols and environmental restrictions, ensuring the products meet rigorous quality and regulatory requirements. The work must be performed to fulfill the specific technical and procedural mandates set forth by the Fluid Handling Division under the Department of Defense. The solicitation is classified as a subcontract with a response deadline of July 27, 2026, and the place of performance is designated as Tracy, California, with a zip code of 95304-5000. The NAICS code 332994 indicates the work falls under other fabricated metal product manufacturing. The contract was posted on July 16, 2026, and all activities must align with DLA specifications, including documentation and labeling requirements, to ensure seamless integration into military supply chains.

General Info

Manufacture and deliver 7,000 NSN 4720017076195 hose assemblies to DLA standards in Tracy, CA by July 27, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-268X.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, NONME

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture, test, package, mark, and deliver 7,000 units of nonmetallic hose assemblies (NSN: 4720017076195) in compliance with DLA standards, including origin inspection and environmental restrictions.