Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

GC/MS Technical Support and On-site Training Services

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for GC/MS Technical Support and On-site Training Services involves providing specialized installation and operator training for prime contractors supporting Illinois Environmental Protection Agency laboratory projects. The scope of work requires instrument-certified technical support technicians to configure GC/MS instruments and deliver three to five days of on-site training for agency personnel utilizing diagnostic software. The primary objective is to ensure the delivery of fully operational GC/MS systems and a proficiently trained staff. The services are to be performed in Springfield, Illinois, under NAICS code 811211.

General Info

GC/MS technical support and on-site operator training for Illinois EPA laboratory projects.

Agency

Illinois → Laboratory

NAICS

811211 - Consumer Electronics Repair and Maintenance

Place of Performance

Springfield, IL, 62702, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-532EPA-LAB53-B-50621.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-532EPA-LAB53-B-50621 | Gas Chromatograph/Mass Spectrometers (GCMS)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJan 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIllinois → Laboratory

ContactsNo contacts available

OfficeN/A

Organization / AgencyIllinois → Laboratory

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-site installation and operator training for prime contractors on Illinois Environmental Protection Agency (IEPA) laboratory projects. Configures GC/MS instruments and provides 3-5 days of on-site training for agency personnel using diagnostic software. Requires instrument-certified technical support technicians. Delivers installed, operational GC/MS systems and trained agency staff.

Similar Contracts

Same NAICS industry code

Medical Equipment Installation and Maintenance

248-NETWORK Contract Office 8 (36C248)

POSTED

about 14 hours ago

DEADLINE

Primary Engineering Control (PEC) CertificationThis subcontract opportunity is for the Primary Engineering Control certification of Biological Safety Cabinets and Laminar Airflow Workstations at VA Medical Center projects. The selected provider will perform critical performance evaluations and certifications to ensure sterile environment requirements are met, utilizing NIST-traceable airflow velocity testers and particle counters. All work must be conducted in accordance with USP 797, USP 800, and CETA CAG-003-2006 standards, with final deliverables consisting of detailed PEC Certification reports. Managed by the Department of Veterans Affairs Network Contract Office 9, this project is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811211. To ensure technical compliance and safety, the contract mandates that all personnel performing the certifications hold CETA/CNBT certification. Interested parties must respond by October 28, 2026.

249-NETWORK Contract Office 9 (36C249)

POSTED

DEADLINE

in about 17 hours

Cable System Maintenance and Repair ServicesThe Cable System Maintenance and Repair Services subcontract involves providing technical support, troubleshooting, and hardware replacement for prime contractors at the Robinson Correctional Center in Illinois. The selected provider is responsible for dispatching technicians within 24 to 48 hours of a reported service problem and ensuring that replacement parts are installed and services are restored within a 48-hour window using specialized signal testing equipment. To maintain facility security, all technicians must successfully pass comprehensive background checks. Additionally, the contractor is required to deliver detailed maintenance logs and repair records upon the completion of each service call. This opportunity falls under NAICS code 811211, with a response deadline set for November 3, 2026.

ROBINSONCC426 - Robinson Correctional Center

POSTED

DEADLINE

Training Aid Weapon Technician/SupplierThis subcontract opportunity with the Department of National Defence involves the supply, maintenance, and repair of training aid weapons for prime contractors on simulator projects. The selected provider will be responsible for performing first-echelon repair work, managing the custody and care of compressed air systems, and supplying necessary spare parts and compressed air chargers to ensure a functioning inventory. To be eligible, the contractor must possess Secret security clearance and be registered with the Controlled Goods Program. The contract is categorized under NAICS code 811211 and is based in Canada, with a response deadline set for November 10, 2026.

Department of National Defence

POSTED

DEADLINE

Dental Suite Equipment Maintenance and CalibrationThe Dental Suite Equipment Maintenance and Calibration subcontract involves providing preventative maintenance, repair, and calibration services for prime contractors working on Department of Public Health projects at Western Massachusetts Hospital. The scope of work focuses on the routine inspection and safety calibration of X-ray machines and dental chairs using specialized diagnostic tools to ensure all equipment is fully maintained and certified. Qualified providers must hold manufacturer-specific certifications or be a Certified Biomedical Equipment Technician. This opportunity is categorized under NAICS code 811211, with performance taking place in Boston, Massachusetts. Interested parties must submit their responses by the deadline of November 30, 2026.

WMH001 - Western Massachusetts Hospital

POSTED

DEADLINE

in about 1 month

Post-Warranty Service and Maintenance (Years 2-3)This subcontract focuses on providing post-warranty service and maintenance for the QuantStudio 5 Dx instrument supporting Tarrant County laboratory projects. The scope of work includes performing scheduled preventative maintenance, corrective repairs, troubleshooting, and ongoing qualification checks to ensure maximum instrument uptime and valid qualification status. All services must be executed by a Certified Field Service Engineer using original equipment manufacturer replacement parts. The opportunity is categorized under NAICS code 811211 and is managed by Tarrant County in Texas. Interested parties should note that the posting date is October 16, 2026, with a response deadline set for November 5, 2026. This contract specifically covers the second and third years of the post-warranty service period.

POSTED

DEADLINE

QuantStudio 5 Dx Installation and Qualification ServicesThis subcontract for Tarrant County in Texas involves the physical installation, network integration, and technical qualification of the QuantStudio 5 Dx genetic analysis instrument. The scope of work includes executing account and security configurations, verifying connectivity with Diomni software, and completing all necessary maintenance qualification procedures to ensure the instrument is fully operational. To fulfill these requirements, the project mandates the use of a Certified Field Service Engineer specifically qualified for the QuantStudio 5 Dx. The contract was posted on October 16, 2026, with a response deadline of November 5, 2026, falling under NAICS code 811211.

POSTED

DEADLINE

MH-139 Ni-Cad Battery Maintenance SpecialistThis subcontract opportunity is for a MH-139 Ni-Cad Battery Maintenance Specialist to support prime contractors on Department of Defense projects at F. E. Warren AFB. The selected provider will be responsible for the comprehensive readiness management of Nickel-Cadmium batteries, including storage, inspection, fluid leveling, discharging, charging, and testing. All work must be performed using Christie RF80-M analyzers in strict accordance with OEM standards, AFOSH compliance, and USAF T.O. 00-20-1 regulations. The contractor is required to provide certified personnel to deliver fully serviced and certified batteries along with all necessary AFTO/DD documentation. This is a total small business set-aside under NAICS code 811211. Interested parties must submit their responses by October 29, 2026, for performance located in zip code 82001.

FA4613 90 Cons Pk

POSTED

DEADLINE

Sensy Sampling and Analysis Technical ServicesThe Sensy Sampling and Analysis Technical Services subcontract involves providing specialized sampling and analysis services for prime contractors operating on New York Power Authority projects at the Charles Poletti Power Project. The scope of work focuses on the technical analysis of samples, system calibration, and performance verification specifically utilizing Sensy sampling and analysis systems. To ensure operational standards, personnel are required to possess technical certification and training specific to Sensy equipment. Key deliverables for this engagement include the submission of detailed analysis reports, the provision of calibrated systems, and the maintenance of technical service logs. This opportunity is categorized under NAICS code 811211 and is associated with the Power Authority of New York. Interested parties should note the response deadline of November 3, 2026.

Power Authority of New York

POSTED

DEADLINE

Liquid-Filled Power Transformer Repair and RewindingThis subcontract involves the core technical refurbishment of a Square D Schneider Electric liquid-filled power transformer for prime contractors working on City of Hayward Water Resource Recovery Facility projects. The scope of work includes the removal of old windings and insulation, the installation of new components, and the completion of internal bus connection work. To ensure operational integrity, the contractor must conduct comprehensive shop testing, including winding-resistance, insulation-resistance, power-factor, and dielectric-strength tests, to verify an impedance of 5.67%. The final deliverable is a fully refurbished transformer unit to be performed in Hayward, California.

City of Hayward

POSTED

DEADLINE

in about 17 hours

Battery Charger Repair and Functional RestorationThis subcontract involves the teardown, evaluation, repair, and modification of battery chargers for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is responsible for delivering 15 fully repaired and functional battery chargers under NSN 6130-01-158-5195, ensuring all work adheres to technical orders, drawings, and the specific requirements of CAGE Code 072E5 and Reference Number 1657613-100. Compliance is mandatory with MIL-STD-130, REV N for marking and all applicable CMMC standards. The project falls under NAICS code 811211 and is managed through the Department of Defense. The response deadline for this opportunity is November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Super Grid Transformer (SGT) Refurbishment SpecialistThis subcontract involves the core mechanical and electrical refurbishment of three super grid transformers for prime contractors operating at UK Atomic Energy Authority facility projects. The scope of work includes internal tank inspection and cleaning, the replacement of bushings, seals, and gaskets, and comprehensive testing of insulation and windings. To ensure operational integrity, the project requires the use of vacuum drying systems and specialized high-voltage testing equipment. The primary objective is the delivery of three fully refurbished and commissioned super grid transformers. This specialized technical engagement falls under NAICS code 811211 and is managed through the UK Atomic Energy Authority, with a response deadline set for November 5, 2026.

UK Atomic Energy Authority

POSTED

DEADLINE

More opportunities from Illinois → Laboratory

Same awarding agency

Specialized Laboratory Material TransportThis subcontract for Specialized Laboratory Material Transport involves the delivery and transport of sensitive laboratory testing materials for prime contractors working on Illinois Environmental Protection Agency projects. The scope of work specifically requires the hauling of 27 Colisure kits to IEPA Labs in Springfield, Illinois, with a strict requirement to maintain the integrity of irradiated materials through the use of secure or climate-controlled transport vehicles. The contractor is responsible for ensuring the safe transit of these materials and providing confirmed receipt upon delivery to the designated facility. This operation falls under NAICS code 484220 and is centered in the Springfield area.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Colisure 200T Irradiated Testing KitsThis subcontract involves the supply of 27 units of WCLS2001 Colisure 200T Irradiated testing kits to the Illinois Environmental Protection Agency laboratory in Springfield. The materials must be merchantable and maintain a shelf life of at least twelve months to ensure they are fit for use throughout the project duration. The agreement requires strict adherence to cybersecurity risk certifications as mandated by 30 ILCS 500/25-90. Operating under NAICS code 325199, the provider supports prime contractors in delivering these proprietary water testing materials to the agency.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

7-Year Service and Application Support ContractThis subcontract provides ongoing maintenance, calibration, and application support for prime contractors working on Illinois Environmental Protection Agency projects. Based in Springfield, the agreement spans at least seven years and requires the use of manufacturer-certified technicians to ensure system uptime and the delivery of annual maintenance reports. The contract mandates a guaranteed on-site response time of less than five business days. It is categorized under NAICS code 811210 and is managed through the Illinois laboratory agency system.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

ICP-MS Installation and Technical TrainingThis subcontract for ICP-MS Installation and Technical Training involves providing physical installation, start-up services, and operator training for prime contractors on Illinois Environmental Protection Agency projects. The work is to be performed in Springfield, Illinois, and requires the use of instrument certified support technicians to ensure the delivery of an operational system and signed-off performance specifications. The contractor must execute the on-site installation within eight weeks of the award and provide between three to five days of on-site staff training. The primary objective is to ensure that personnel are fully trained and the system is functioning according to the required technical standards.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Laboratory Computing and LIMS IntegrationThis subcontract for Laboratory Computing and LIMS Integration supports prime contractors working on Illinois Environmental Protection Agency projects. The scope of work involves the supply and configuration of workstations featuring Windows 11, Intel Core i7-8700 CPUs, 500 GB hard drives, and 32 GB of RAM. The provider is responsible for installing Mass Hunter software and ensuring seamless, uninterrupted data processing to the Laboratory Information Management System. These services and the integrated software suite will be delivered to the place of performance in Springfield, Illinois.

Computer Systems Design Services

POSTED

DEADLINE

ICP-MS System Manufacturing and SupplyThis subcontract involves the manufacturing and supply of a complete Inductively Coupled Plasma Mass Spectrometer system for prime contractors working on Illinois Environmental Protection Agency projects. The system must be fully functional and meet USEPA methods 200.8 and 6020, featuring a collision cell, an auto-tunable one-piece plasma quartz torch, and a high RF frequency mass analyzer exceeding 2.7 MHz. The provider is required to hold ISO certification to ensure quality standards for the hardware and accessories delivered. Performance of the contract is centered in Springfield, Illinois, under NAICS code 334516, with the procurement managed by the Illinois Laboratory agency.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

ICP-MS Consumables and Gas Regulation SupplyThis subcontract for ICP-MS Consumables and Gas Regulation Supply provides essential equipment and materials for prime contractors working on Illinois Environmental Protection Agency projects. The scope of work includes the delivery of specialized Helium gas regulators constructed with brass, PTFE seals, and stainless steel diaphragms, along with a one-month supply of consumables sufficient for processing 500 samples. The contract is managed under NAICS code 423450 and is associated with a laboratory agency in Illinois. Performance of the contract takes place in Springfield, Illinois, with the primary objective of ensuring the availability of critical gas regulation and consumable kits necessary for project operations.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

GC/MS Warranty and On-site Maintenance SupportThis subcontract for GC/MS Warranty and On-site Maintenance Support involves providing warranty repairs and technical maintenance for prime contractors working on Illinois Environmental Protection Agency laboratory projects. Based in Springfield, Illinois, the contract requires certified technicians to perform on-site services for GC/MS instruments, ensuring they are properly maintained and calibrated. A critical requirement of the agreement is a response time of less than five business days for service calls. The scope of work includes the use of specific replacement parts and calibration tools to deliver fully operational and calibrated instrumentation. The project falls under NAICS code 811211 and is managed through the Illinois laboratory agency.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Gas Chromatograph/Mass Spectrometer (GC/MS) Equipment SupplierThis subcontract involves the supply of two Gas Chromatograph/Mass Spectrometers designed for prime contractors working on Illinois Environmental Protection Agency laboratory projects. The selected supplier must be ISO accredited and responsible for manufacturing and delivering instruments capable of testing for 1, 4 Dioxane. The scope of work includes the delivery of two fully functional GC/MS instruments along with an initial one-month supply of reagents, standards, and consumables sufficient for processing 500 samples. Performance of the contract is centered in Springfield, Illinois, under NAICS code 334516.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Off-Site Specialized Electrical Calibration

Management and Administration

POSTED

DEADLINE

On-Site Electrical Measurement Calibration

Management and Administration

POSTED

DEADLINE

24/7 Emergency Generator Repair and Response

Wake Technical Community College

POSTED

CLOSED

Preventive Maintenance & Inspections for Emergency Generators

Wake Technical Community College

POSTED

CLOSED

Vehicle Outfitting and Equipment Installation

San Diego County

POSTED

CLOSED

Installation and Commissioning of Milli-Q IQ 7005

Management and Administration

POSTED

DEADLINE

Medical Equipment Warranty and Service Support

Randolph Community College

POSTED

CLOSED

K9 Unit Vehicle Upfitting & Specialized Equipment Installation

State of Rhode Island

POSTED

CLOSED

Mechanical, Plumbing, and HVAC Code Review

City of Stamford

POSTED

CLOSED

Accessibility (ADA/CT Accessibility Code) Compliance Review

City of Stamford

POSTED

CLOSED

Electrical and Fire/Life Safety Code Review

City of Stamford

POSTED

CLOSED

Third-Party Building Code Compliance Review

City of Stamford

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS