Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

ICP-MS Installation and Technical Training

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for ICP-MS Installation and Technical Training involves providing physical installation, start-up services, and operator training for prime contractors on Illinois Environmental Protection Agency projects. The work is to be performed in Springfield, Illinois, and requires the use of instrument certified support technicians to ensure the delivery of an operational system and signed-off performance specifications. The contractor must execute the on-site installation within eight weeks of the award and provide between three to five days of on-site staff training. The primary objective is to ensure that personnel are fully trained and the system is functioning according to the required technical standards.

General Info

Subcontract for ICP-MS installation and technical training for Illinois EPA projects in Springfield.

Agency

Illinois → Laboratory

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Springfield, IL, 62702, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-532EPA-LAB53-B-50817.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-532EPA-LAB53-B-50817 | ICPMS Inductively Coupled Plasma Mass Spectrometer (ICP/MS) t

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJan 23

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIllinois → Laboratory

ContactsNo contacts available

OfficeN/A

Organization / AgencyIllinois → Laboratory

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical installation, start-up, and operator training for prime contractors on Illinois Environmental Protection Agency (IEPA) projects. Executes on-site installation within eight weeks of award and provides 3 to 5 days of on-site staff training. Requires instrument certified support technicians. Delivers an operational system, trained personnel, and signed-off performance specifications.

Similar Contracts

Same NAICS industry code

Data Center Heating and Cooling

Solicitation # BPM059482

The Maryland Department of Human Services, Office of Technology for Human Services, is soliciting bids for comprehensive semi-annual preventive maintenance, routine battery inspections, and 24/7/365 emergency field services for its data center infrastructure at 25 S. Charles St., Baltimore, MD. This Small Business Reserve procurement is restricted exclusively to certified Maryland SBR vendors registered in eMMA. The scope of work includes the maintenance of Liebert EXM 100kVA UPS systems, battery cabinets, Vertiv Geist PDUs, Liebert CRV precision cooling units, and drycoolers and glycol pump systems located on the 12th floor and 8th floor parking garage. A critical requirement of the contract is a guaranteed 4-hour on-site arrival for emergency services, with failure to meet this SLA resulting in liquidated damages of 250.00 dollars per hour of delay. Eligible bidders must possess at least three consecutive years of documented corporate experience in mission-critical data center power and cooling maintenance and provide proof of technician competency through OEM certifications. Mandatory submissions include a fully loaded firm fixed price proposal, a mercury-free affidavit, federal funds compliance documentation, and financial capability proof. Bids must be submitted electronically via the DHS ePACE / OpenGov portal under Project ID 320443 by December 1, 2026, at 3:00 PM EST. A combined pre-bid conference and site walkthrough is scheduled for November 12, 2026, requiring an RSVP to the Procurement Officer 48 hours in advance for security clearance.

Maryland Department of Human Services

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Equipment Warranty ProviderThis subcontract agreement establishes an Equipment Warranty Provider to support prime contractors on projects for the Town of Wellesley Municipal Light Plant in Massachusetts. The primary objective is the delivery of a five-year extended warranty specifically covering switchgear and breaker assemblies, ensuring that all services align with the terms defined in the bid specifications. The scope of work includes the formal execution of the warranty agreement as well as the provision of subsequent maintenance and replacement services over the five-year term. Performance will take place at the Municipal Light Plant on Municipal Way in Wellesley, with a response deadline for the solicitation set for December 10, 2026.

Town of Wellesley

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Precision Fabrication of KC-135 Metal Tube AssembliesThis subcontract involves the precision fabrication of 168 metal tube assemblies for KC-135 aircraft, supporting prime contractors for the DLA Weapons Support Fluid Handling Division. The scope of work includes precision bending, cutting, and fitting in strict accordance with TDP Rev A Gen 1 and Basic Drawing NR 98748 8427555. All completed assemblies must be inspected and packaged according to ASTM D3951 standards for delivery to Tinker AFB. To qualify for this project, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. Additionally, JCP certification is required to ensure authorized access to ITAR and EAR regulated data. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0254

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

CNC Router Maintenance and Emergency RepairThis subcontract for CNC Router Maintenance and Emergency Repair supports prime contractors on City of Edmonton sign shop projects. The selected provider is responsible for performing all preventative maintenance and emergency repairs, including the provision of all necessary parts and labor. Key obligations include executing warranty maintenance, utilizing diagnostic tools for part replacement, and adhering to specified timeframes for emergency service calls to ensure equipment is returned to service promptly. The contract requires the delivery of maintained equipment along with detailed repair reports. Performance will take place in Edmonton, Canada, under NAICS code 811210. Interested parties must submit their responses by the deadline of November 23, 2026.

The City of Edmonton

POSTED

about 19 hours ago

DEADLINE

Flowmeter and Pressure Transducer Technical ServicesThis subcontract opportunity is for the provision of technical services involving the maintenance, calibration, and replacement of system instrumentation for prime contractors working on Government of Ontario Environment, Conservation and Parks projects. The scope of work specifically includes the removal and cleaning of pressure transducers, as well as the removal, replacement, and calibration of flowmeters utilizing precision tools. Qualified providers must hold instrumentation technician certification to ensure the delivery of calibrated instrumentation and the associated calibration certificates. The solicitation is listed under NAICS code 811210, with a response deadline of November 27, 2026, for performance within Canada.

Environment, Conservation and Parks

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Reciprocating Pump Teardown and Repair ServicesThis subcontract for Reciprocating Pump Teardown and Repair Services involves the comprehensive restoration of six reciprocating pumps, identified by NIIN 016136055, for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes the complete disassembly of the pumps to identify defects, followed by mechanical repairs conducted according to original manufacturer specifications. The selected provider must execute all necessary inspections and testing to ensure operational readiness. To successfully complete the project, the contractor must utilize precision repair tooling and maintain strict GSI compliance. The final deliverable consists of six fully repaired and tested reciprocating pumps. This opportunity falls under NAICS code 811210 and is associated with the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

Clinical Equipment Training and Maintenance ProviderThis subcontract opportunity with the Department of Veterans Affairs involves providing professional training and ongoing maintenance for prime contractors supporting the VA Boston Healthcare System. The selected provider will be responsible for conducting clinical staff training on video systems and Endoflators, performing necessary repairs and preventative maintenance, and offering reprocessing guidance aligned with Instructions for Use. To ensure technical proficiency, the contract requires the use of manufacturer-certified technicians, specifically those certified by Karl Storz or an equivalent entity. Key deliverables include the provision of maintenance service logs and official training certifications for staff. The project falls under NAICS code 811210 and is managed through the 241-NETWORK Contract Office.

241-NETWORK Contract Office 01 (36C241)

POSTED

about 23 hours ago

DEADLINE

Specialized Repair of Electric Warming Oven (NSN 7310171251500)This subcontract involves the specialized repair of an electric warming oven (NSN 7310171251500) for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work includes technical evaluation, disassembly, and full restoration to ensure the unit is operable and meets original manufacturer specifications and technical orders. The final deliverable is one fully restored unit that is marked in accordance with MIL-STD-130. Performance will take place in Philadelphia under NAICS code 811210. To be eligible, the contractor must maintain ISO 9001 certification and ensure full compliance with CMMC and DFARS requirements. The response deadline for this opportunity is November 30, 2026.

Navsup Weapon Systems Support

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Siemens Luminos Agile Max XR3 Technical Repair & InstallationThis subcontract involves providing specialized technical repair and installation services for medical imaging projects at the Palo Alto VA Health Care System under the Department of Veterans Affairs. The scope of work focuses on the installation of KermaX NTP-CAN, D611 FIL/RAC, and Front panel NRF kits, utilizing specialized diagnostic tools to perform essential system calibration and testing to ensure a fully operational XR3 system. To qualify for this engagement, the contractor must possess Siemens Luminos Agile Max XR3 technical certification and official OEM service authorization. The project is categorized under NAICS code 811210 and is managed through the Network Contract Office 21.

261-NETWORK Contract Office 21 (36C261)

POSTED

about 23 hours ago

DEADLINE

Wavemeter Installation and Technical Training Services

FA8601 Aflcmc Pzio

POSTED

about 23 hours ago

DEADLINE

Zeiss Ophthalmology Equipment Maintenance and RepairThis subcontract opportunity involves providing full-service maintenance for Zeiss Ophthalmology Equipment at the Naval Medical Center Camp Lejeune in support of the Defense Health Agency. The scope of work includes annual preventative maintenance, calibrations, troubleshooting, and software updates specifically for Zeiss ATLAS 9000 and Cirrus HDOCT 5000 systems. The selected provider must deliver calibrated equipment and detailed preventative maintenance service reports. To qualify, technicians must be Zeiss OEM trained, and the contractor is required to provide an authorization letter from Carl Zeiss Meditec USA, Inc. This is a total small business set-aside under NAICS code 811210. Interested parties must submit their responses by November 2, 2026.

Defense Health Agency

POSTED

about 23 hours ago

DEADLINE

More opportunities from Illinois → Laboratory

Same awarding agency

Specialized Laboratory Material TransportThis subcontract for Specialized Laboratory Material Transport involves the delivery and transport of sensitive laboratory testing materials for prime contractors working on Illinois Environmental Protection Agency projects. The scope of work specifically requires the hauling of 27 Colisure kits to IEPA Labs in Springfield, Illinois, with a strict requirement to maintain the integrity of irradiated materials through the use of secure or climate-controlled transport vehicles. The contractor is responsible for ensuring the safe transit of these materials and providing confirmed receipt upon delivery to the designated facility. This operation falls under NAICS code 484220 and is centered in the Springfield area.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Colisure 200T Irradiated Testing KitsThis subcontract involves the supply of 27 units of WCLS2001 Colisure 200T Irradiated testing kits to the Illinois Environmental Protection Agency laboratory in Springfield. The materials must be merchantable and maintain a shelf life of at least twelve months to ensure they are fit for use throughout the project duration. The agreement requires strict adherence to cybersecurity risk certifications as mandated by 30 ILCS 500/25-90. Operating under NAICS code 325199, the provider supports prime contractors in delivering these proprietary water testing materials to the agency.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

7-Year Service and Application Support ContractThis subcontract provides ongoing maintenance, calibration, and application support for prime contractors working on Illinois Environmental Protection Agency projects. Based in Springfield, the agreement spans at least seven years and requires the use of manufacturer-certified technicians to ensure system uptime and the delivery of annual maintenance reports. The contract mandates a guaranteed on-site response time of less than five business days. It is categorized under NAICS code 811210 and is managed through the Illinois laboratory agency system.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Laboratory Computing and LIMS IntegrationThis subcontract for Laboratory Computing and LIMS Integration supports prime contractors working on Illinois Environmental Protection Agency projects. The scope of work involves the supply and configuration of workstations featuring Windows 11, Intel Core i7-8700 CPUs, 500 GB hard drives, and 32 GB of RAM. The provider is responsible for installing Mass Hunter software and ensuring seamless, uninterrupted data processing to the Laboratory Information Management System. These services and the integrated software suite will be delivered to the place of performance in Springfield, Illinois.

Computer Systems Design Services

POSTED

DEADLINE

ICP-MS System Manufacturing and SupplyThis subcontract involves the manufacturing and supply of a complete Inductively Coupled Plasma Mass Spectrometer system for prime contractors working on Illinois Environmental Protection Agency projects. The system must be fully functional and meet USEPA methods 200.8 and 6020, featuring a collision cell, an auto-tunable one-piece plasma quartz torch, and a high RF frequency mass analyzer exceeding 2.7 MHz. The provider is required to hold ISO certification to ensure quality standards for the hardware and accessories delivered. Performance of the contract is centered in Springfield, Illinois, under NAICS code 334516, with the procurement managed by the Illinois Laboratory agency.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

ICP-MS Consumables and Gas Regulation SupplyThis subcontract for ICP-MS Consumables and Gas Regulation Supply provides essential equipment and materials for prime contractors working on Illinois Environmental Protection Agency projects. The scope of work includes the delivery of specialized Helium gas regulators constructed with brass, PTFE seals, and stainless steel diaphragms, along with a one-month supply of consumables sufficient for processing 500 samples. The contract is managed under NAICS code 423450 and is associated with a laboratory agency in Illinois. Performance of the contract takes place in Springfield, Illinois, with the primary objective of ensuring the availability of critical gas regulation and consumable kits necessary for project operations.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

GC/MS Warranty and On-site Maintenance SupportThis subcontract for GC/MS Warranty and On-site Maintenance Support involves providing warranty repairs and technical maintenance for prime contractors working on Illinois Environmental Protection Agency laboratory projects. Based in Springfield, Illinois, the contract requires certified technicians to perform on-site services for GC/MS instruments, ensuring they are properly maintained and calibrated. A critical requirement of the agreement is a response time of less than five business days for service calls. The scope of work includes the use of specific replacement parts and calibration tools to deliver fully operational and calibrated instrumentation. The project falls under NAICS code 811211 and is managed through the Illinois laboratory agency.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

GC/MS Technical Support and On-site Training ServicesThis subcontract for GC/MS Technical Support and On-site Training Services involves providing specialized installation and operator training for prime contractors supporting Illinois Environmental Protection Agency laboratory projects. The scope of work requires instrument-certified technical support technicians to configure GC/MS instruments and deliver three to five days of on-site training for agency personnel utilizing diagnostic software. The primary objective is to ensure the delivery of fully operational GC/MS systems and a proficiently trained staff. The services are to be performed in Springfield, Illinois, under NAICS code 811211.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Gas Chromatograph/Mass Spectrometer (GC/MS) Equipment SupplierThis subcontract involves the supply of two Gas Chromatograph/Mass Spectrometers designed for prime contractors working on Illinois Environmental Protection Agency laboratory projects. The selected supplier must be ISO accredited and responsible for manufacturing and delivering instruments capable of testing for 1, 4 Dioxane. The scope of work includes the delivery of two fully functional GC/MS instruments along with an initial one-month supply of reagents, standards, and consumables sufficient for processing 500 samples. Performance of the contract is centered in Springfield, Illinois, under NAICS code 334516.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS