Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

GEAR AND SHAFT ASSE

Open
SPE7L1-27-T-4751Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Place of Performance

5450 CARLISLE PK BLDG 209N, MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

SBA

Documents

1
PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
Matthew Lepak
Sign up to see this detail
Sign up to see this detail

Full Description

Show more
GEAR AND SHAFT ASSE
GEAR AND SHAFT ASSE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TDP Rev A Gen 1 IAW BASIC DRAWING NR 53711 8843219 REVISION NR E DTD 08/05/2025 PART PIECE NUMBER: 581-8843219-A2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017185165 0001 EA 1.000
NSN/MATERIAL:3020017215515
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.
SPE7L1-27-T-4751
SECTION B
PR: 7017185165 PRLI: 0001 CONT’D
Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N36204
NAVSEALOGCEN CODE 63113
WAREHOUSE OPS
5450 CARLISLE PK BLDG 209N
MECHANICSBURG PA 17050-2411
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N36204
NAVSEALOGCEN CODE 63113
WAREHOUSE OPS
5450 CARLISLE PK BLDG 209N
MECHANICSBURG PA 17050-2411
US
M/F: (TCN) N00024615997KP
RDD:
PROJ: ZNH TP 3
SUPP ADD: N36204 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A4A DIST: 3B ADV: FC: 51
Need Ship Date:00/00/0000 Original Required Delivery Date:06/12/2026
SPE7L1-27-T-4751 NSN/Part Number: 3020-01-721-5515 Quantity: 1 EA Purchase Request: 7017185165QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333612
New
DIBBS
COUPLING, SHAFT, FLEXIBL
Solicitation # SPE7LX-27-U-0704
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 333612
New
DIBBS
GEAR SET, BEVEL, MATCHED
Solicitation # SPE7L4-27-T-1160
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
GEAR CLUSTER
Solicitation # SPE7LX-27-U-0664
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 333612
New
DIBBS
Turbo Supercharger Component SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, involves the supply of specialized turbo superchargers for non-aircraft engines. The selected supplier is responsible for manufacturing or procuring components identified by NSN 2950017144392 and delivering three packaged units. All packaging must strictly adhere to ASTM D3951 standards, and the supplier must obtain engineering source approval from the government design control activity for any restricted source items. The contract falls under NAICS code 333612 and specifies the place of performance in Tracy, California. Interested parties must have responded by the deadline of November 19, 2026, following the posting on November 11, 2026. This procurement supports prime contractors fulfilling broader DLA supply contracts.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333612
New
DIBBS
REEL, CABLE
Solicitation # SPE8EE-27-T-0398
Solicitation SPE8EE-27-T-0398 is a small business set-aside procurement issued by the DLA Troop Support Construction and Equipment Manu and Con office for the acquisition of three cable reels, identified by NSN 3830-01-276-1485. The contract is established under the First Destination Transportation program with a delivery requirement of 166 days after order. The designated place of performance and delivery is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination per FAR 52.246-1. The procurement is subject to strict technical and quality requirements maintained in the DLA Master List, with packaging and marking mandated by MIL-STD-129 and palletization governed by RP001. The contract incorporates several critical regulatory clauses, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Quotations for this effort are due by November 23, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
YOKE, UNIVERSAL JOINT, N
Solicitation # SPE7LX-27-U-0561
Solicitation SPE7LX-27-U-0561 is a fixed-price procurement issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the supply of 35 nonvehicular universal joint yokes (NSN 3010004328495). This is a total small business set-aside procurement under NAICS code 333612, with delivery required within 104 days after order. The contract is established under the First Destination Transportation program with shipping terms set as FOB Origin, while both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and labeling standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. Palletization must comply with RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract incorporates several critical regulatory clauses, including the Buy American Act, Berry Amendment, and DFARS requirements for cybersecurity safeguarding and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 333612
New
DIBBS
TURBO SUPERCHARGER, ENG
Solicitation # SPE4A7-27-T-3735
Solicitation SPE4A7-27-T-3735 is a procurement by the Defense Logistics Agency for three non-aircraft engine turbo superchargers, identified by NSN 2950-01-714-4392. This is a restricted source item requiring engineering source approval from the government design control activity. The required delivery date is June 22, 2027, with a need ship date of May 4, 2027, for delivery to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance are conducted at the destination per FAR 52.246-2, and Certificate of Conformance procedures under FAR 52.246-15 are authorized. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Environmental restrictions prohibit the use of Class I ozone depleting chemicals. Administratively, the contractor must use the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses include DFARS 252.225-7001 for the Buy American program and DFARS 252.204-7012 for safeguarding covered defense information.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333612
New
DIBBS
LEVER, MANUAL CONTROL
Solicitation # SPE7L1-27-T-4628
Solicitation SPE7L1-27-T-4628 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of five manual control levers under NSN 3040-01-144-3854. The items must be manufactured in accordance with specific reference drawings, including 80063 SM-B-603431, SM-C-603844, SM-A-546153, and SM-D-603365. Delivery is required within five days after order, with the place of performance and delivery located in Decatur, Illinois. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Due to the nature of the technical data, the contract is subject to export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with cybersecurity standards, including NIST SP 800-171 and CMMC Level 2 requirements. Additionally, the Buy American Act and Berry Amendment apply to all quotes above the micro-purchase threshold.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
ROTORSEAL, SHAFT
Solicitation # SPE7L1-27-T-4693
Solicitation SPE7L1-27-T-4693 is a Request for Quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 143 units of a Rotorseal, Shaft, identified by NSN 3010-15-194-1226 and part number 60154614 from Iveco Defence Vehicles S.p.A. This acquisition is designated as a Small Business Set-Aside and is classified as a commercial item. The required delivery date is August 4, 2027, with a delivery timeline of 253 days after order. The terms are FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Barstow in California. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the delivered items. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. Additionally, the contractor must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Offerors are prohibited from using additive manufacturing processes for these parts unless specifically authorized.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
GEAR SET, SPUR, MATCHED
Solicitation # SPE7L4-27-T-1135
Solicitation SPE7L4-27-T-1135 is a small business set-aside issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of 60 matched spur gear sets (NSN 3020-01-082-1417). The contract specifies a delivery timeline of 166 days after order, with a need ship date of May 9, 2027, and an original required delivery date of August 27, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The procurement includes strict packaging and marking requirements under MIL-STD-2073-1E and MIL-STD-129. Each gear spur must be individually preserved, wrapped, and heat-sealed in a barrier bag before being placed in a unit container. Special marking code ZZ requires the labels "MATCHED SET - DO NOT SEPARATE" and "OPEN FOR INSPECTION OR USE ONLY." Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with specific verification levels for critical, major, and minor attributes. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment requests.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
CLUTCH ASSEMBLY, FRICTI
Solicitation # SPE7L1-27-Q-0190
The Defense Logistics Agency Weapons Support Land Supply Chain is soliciting quotes for 59 friction clutch assemblies for freewheeling transmissions, identified by NSN 3010-01-300-3763. This is a restricted source item requiring engineering source approval from the Government design control activity. The contractor must adhere to specific technical drawings and the AS9100 higher-level quality standard. Key deliverables include the supply of the assemblies and the completion of a first article test on one unit, with the government requiring notification 14 days prior to testing for potential witnessing. Delivery is required within 350 days after receipt of order, with the destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance requirements are stringent, including a strict prohibition on Class I ozone depleting chemicals and the requirement to use source-controlled components from approved sources. The contract mandates adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, and contractors must meet specific cybersecurity standards, including CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Award will be based on best value, evaluating price, offered delivery, and past performance. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 333612
New
DIBBS
ASSY GEAR, IDLE SER
Solicitation # SPE7L5-27-T-0699
This procurement is for the acquisition of six units of an idle gear assembly, identified by NSN 3020015371182 and Kubota Tractor Corp part number 15875-9934-0. The contract is a small business set-aside managed by the DLA Weapons Support Land Supplier Operations Engines. Key delivery milestones include a need ship date of May 4, 2027, and an original required delivery date of June 23, 2027, with the destination for inspection and acceptance located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict packaging and labeling standards, specifically ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals, and specific safety data sheets are required for any hazardous materials. Administratively, the contract utilizes the Wide Area WorkFlow system for electronic invoicing and payment. It incorporates various FAR and DFARS clauses, including requirements for cybersecurity reporting, the Buy American Act, and the prohibition of additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking for Small Arms PartsThis subcontract involves providing specialized military packaging and marking services for small arms parts supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for packaging items according to MIL-STD-2073-1E and SPI 13058665 Revision A, while ensuring all marking adheres to MIL-STD-129. All work must utilize MIL-SPEC materials and follow RP001 palletization standards to deliver units ready for FOB Origin shipment. The project requires the contractor to be capable of handling ITAR-controlled items and performing work in New Cumberland. This opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense. Interested parties must respond by November 23, 2026.
Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Finishing of Cocking PiecesThis subcontract for the DLA Weapons Support Land Supply Chain involves the precision machining and surface finishing of cocking pieces. The selected provider will be responsible for machining cast components using CNC mills and grinders in strict accordance with TDP Rev B Gen 2 and Drawing NR 19200 13058658. A critical component of the scope is the execution of First Article Testing for critical gun parts to ensure all delivered items are fully inspected and approved. To qualify for this project, contractors must maintain ITAR and EAR registrations, hold JCP certification, and meet CMMC Level 2 security standards. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. Interested parties must submit their responses by November 23, 2026.
Machine Shops

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 331511
New
DIBBS
Precision Metal Casting of Firing Mechanism Cocking PiecesThis subcontract involves the precision metal casting of 120 cocking pieces for the DLA Weapons Support Land Supply Chain, adhering to Reference Drawing NR 19200 13058658, Revision A. The selected provider must utilize industrial casting furnaces to create the necessary tooling and molds to deliver cast metal blanks that meet strict Critical Gun Part quality standards. Performance will take place in New Cumberland, Pennsylvania. To be eligible, contractors must maintain ITAR/EAR registration, JCP certification, and CMMC Level 2 compliance. The project falls under NAICS code 331511 and requires a response by November 23, 2026.
Iron Foundries

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332813
New
DIBBS
Aerospace Finishing and CoatingThis subcontract for Aerospace Finishing and Coating supports the DLA Weapons Support Land Supply Chain by providing specialized surface treatments and coatings for prime contractors. The scope of work involves applying finishes that strictly adhere to TDP specifications and MIL-STD-1907(4) standards. To ensure environmental compliance, the contractor must operate without Class I Ozone Depleting Chemicals and maintain adherence to aerospace environmental standards. The project is managed under the Department of Defense with performance located in Jacksonville, Florida. Due to the nature of the components, the selected provider is required to maintain active ITAR registration. Interested parties should note the response deadline of November 20, 2026, for this effort categorized under NAICS code 332813.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332111
New
DIBBS
Aerospace Material SupplyThis subcontract for the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the procurement of raw aerospace-grade alloys. The selected provider must supply materials that strictly adhere to TDP specifications and TT-P-1757B, ensuring all shipments are certified and accompanied by full Mill Test Reports to maintain Critical Safety Item compliance. Additionally, the contractor must guarantee that no Class I Ozone Depleting Chemicals are utilized during material processing. Eligible candidates must maintain active ITAR registration to participate in this effort. The performance of the contract will be based in Jacksonville, Florida. Interested parties should note the response deadline of November 20, 2026, for this aerospace material supply requirement under NAICS code 332111.
Iron and Steel Forging

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 333991
New
DIBBS
Aerospace Forging ServicesThe Aerospace Forging Services subcontract involves performing specialized forging processes for prime contractors supporting the DLA Weapons Support Land Supply Chain. The primary objective is the creation of raw blanks for Hook Assemblies, which requires the development and use of custom forging dies and tooling to ensure all components meet strict aerospace specifications. The final deliverables are forged blanks prepared for subsequent final machining. This project is managed under the Department of Defense and is performed in Jacksonville, Florida. Due to the nature of the technical data involved, the contractor must maintain ITAR registration and JCP Certification to access export-controlled information. The opportunity was posted on November 12, 2026, with a response deadline of November 20, 2026, falling under NAICS code 333991.
Power-Driven Handtool Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Precision Aerospace Component ManufacturingThis subcontract for Precision Aerospace Component Manufacturing involves the fabrication of 390 Hook Assemblies and Bomb Racks for the DLA Weapons Support Land Supply Chain. The manufacturer must utilize precision CNC machining to produce these assemblies in strict accordance with TDP Rev B Gen 3 and Drawing NR 30003 549AS260. Quality assurance requirements include the implementation of zero-defect sampling plans and the coordination of First Article Testing at Dayton T. Brown. To be eligible for this project, the contractor must maintain SAE AS9100 certification, CMMC Level 2 compliance, ITAR registration, and JCP Certification. The work will be performed in Jacksonville, Florida, under NAICS code 336413. Interested parties must respond by November 20, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
Precision Cylinder Component SupplyThe Precision Cylinder Component Supply subcontract involves the production of high-grade alloy steel components, specifically piston rods and cylinder tubes, for the DLA Weapons Support Land Supply Chain. The scope of work includes forging, machining, and grinding processes to deliver individual precision components for final assembly. To maintain strict military grade standards, the provider must supply all necessary material certifications and Mill Test Reports. This opportunity is a Total Small Business Set-Aside under NAICS code 332710, managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 12, 2026, with a response deadline set for November 23, 2026.
Machine Shops

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333995
New
DIBBS
Linear Actuating Cylinder ManufacturingThis subcontract opportunity is for the manufacture and supply of 67 linear actuating cylinder assemblies to support prime contractors for the DLA Weapons Support Land Supply Chain. The scope of work involves precision machining, the assembly of linear mechanisms, and rigorous quality assurance testing in accordance with the DLA Master List of Technical and Quality Requirements. Specifically, the contractor must utilize CNC machining and honing equipment to ensure all units meet P/N 1C-4992 or 3691710C91 specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 333995 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, to be considered for this production requirement.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332322
New
DIBBS
Helical Compression Spring Supply (P/N 69-2375)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the supply of ten specialized helical compression springs, specifically part number 69-2375. The contractor is responsible for manufacturing or sourcing these components to exact specifications and must provide a comprehensive technical data package for both approved and alternate parts. All deliverables must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332322. Interested parties must respond by November 27, 2026, to fulfill the requirements for these prime contractor supplies.
Sheet Metal Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 488510
New
DIBBS
Military-Grade Packaging and Export PreparationThis subcontract involves providing specialized packaging materials and palletization services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires strict adherence to military standards, specifically executing marking according to MIL-STD-129, palletization per RP001, and packaging per MIL-STD-2073-1E. To ensure suitability for international shipment to Taiwan, the contractor must utilize military-grade pallets and preservation materials. The final deliverable is a fully marked, palletized, and shipment-ready component available for FOB Origin pickup. This effort falls under NAICS code 488510 and is managed through the Department of Defense.
Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 331511
New
DIBBS
Metal Casting and Fabrication of Worm ShoeThis subcontract involves the metal casting and fabrication of a Shoe, Worm component for prime contractors supporting the DLA Weapons Support Land Supply Chain. The manufacturer is required to produce one unit under NSN 3040-00-6138144, adhering strictly to TDP Rev A Gen 1 and Basic Drawing NR 19200 6138144 Revision NR C. Production must utilize specific tooling and maintain full compliance with QPL or QML requirements and the Buy American Act. The contract explicitly prohibits the use of additive manufacturing and Class I ozone-depleting chemicals during the production process. This project falls under NAICS code 331511 and is managed by the Department of Defense. Interested parties must adhere to the established response deadline of November 23, 2026.
Iron Foundries

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 333612
Awarded
DIBBS
30--COUPLING,SHAFT,RIGI
Solicitation # SPE7L1-26-T-944N
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 333612
New
DIBBS
PARTS KIT, MECHANICA
Solicitation # SPE7L3-27-T-1545
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in about 23 hours
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS