Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GEAR, SPUR

Active
SPE7L1-26-T-888JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a spur gear with NSN 3020-01-065-5391 and part number 46296D288, supplied by TIMKEN GEARS & SERVICES INC., with a quantity of six units to be delivered within five days of contract award. Delivery is FOB origin, with no tolerance for variance in quantity, and acceptance occurs at the point of origin. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specific methods including preservative treatment 33, dry packaging, wrapping material GB, and container code E5. Palletization follows DLA packaging requirements, and special marking is not required. The item is designated as a critical application, and the use of mercury or mercury-containing compounds is strictly prohibited unless expressly exempted for functional components like batteries, fluorescent lamps, sensors, or weapon systems, in which case secondary containment and shockproofing per NAVSEA 5100-003D are mandatory. The item is to be shipped to the General Depot of Naval Supplies in Kaohsiung, Taiwan, with freight handling governed by DLA procedures C19 and C20. The solicitation number is SPE7L1-26-T-888J, with a response deadline of August 10, 2026, and the required delivery date is July 31, 2026. Technical and quality standards referenced in the DLA Master List apply, with revision control based on the solicitation issue date, and the unit of issue is each, aligned with ANSI X12 standards.

General Info

Six spur gears delivered FOB origin by July 31, 2026, to Kaohsiung, Taiwan, per MIL-STD and DLA requirements.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GEAR,SPUR
GEAR,SPUR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TIMKEN GEARS & SERVICES INC. 97578 P/N 46296D288
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017669189 0001 EA 6.000
NSN/MATERIAL:3020010655391
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
SPE7L1-26-T-888J
SECTION B
PR: 7017669189 PRLI: 0001 CONT’D
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:GB CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
PTWB00
GENERAL DEPOT OF NAVAL SUPPLIES
NO.2186, CUIHUA RD., ZUOYING DIST
E-6, XIE,YUN-DA 886-7-5874861
KAOHSIUNG CITY
TW
MARKFOR
PTWB00
GENERAL DEPOT OF NAVAL SUPPLIES
NO.2186, CUIHUA RD., ZUOYING DIST
E-6, XIE,YUN-DA 886-7-5874861
KAOHSIUNG CITY
TW
M/F: (TCN) PTWB5V62050027
RDD:
PROJ: TP 1
SUPP ADD: PA4KNC SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:07/31/2026
SPE7L1-26-T-888J NSN/Part Number: 3020-01-065-5391 Quantity: 6 EA Purchase Request: 7017669189QTY: 6 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE7L1-26-T-889C
The contract is for the procurement of a Carrier Assembly under solicitation SPE7L1-26-T-889C, with a single unit of issue designated as AY and a required delivery within 20 days FOB destination. The item has the NSN 3040-01-270-5695 and is subject to strict compliance with DLA’s technical and quality requirements referenced in the DLA Master List, including packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking. The contractor must adhere to prohibitions on ozone-depleting chemicals and cannot intentionally add mercury or mercury-containing compounds to the hardware, except for specific functional uses in batteries, fluorescent lights, instrumentation, weapon systems, or NAVSEA-approved chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. There is no shelf life requirement for this material. Delivery is to be shipped via fast traceable means to the recipient at USS Cape St George CG 71, FPO AP 96662, with parcel post strictly prohibited. The designated delivery point is destination, and inspection and acceptance occur at the same location with zero quantity variance permitted. Shipment must follow DLA procedures C19 and C20 and use the provided vendor logistics identifiers, including RDD 777, TCN R218286201CG14, and project code EK5 TP 2. The required delivery date is July 27, 2026, and all submissions must comply with DoD unit of issue standards and DLA’s packaging, marking, and hazardous material restrictions.
LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
GEARSHAFT, MULTIPLE
Solicitation # SPE7L1-26-T-889N
The contract specifies the procurement of a GEARSHAFT, MULTIPLE with NSN 3040-01-556-4201 and part number 219F828, for a quantity of 10 units at a unit price of $10.00, totaling $100.00. Delivery is required within five days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and internal packaging configurations, and marking must adhere to MIL-STD-129 without any special identification codes. Palletization follows DLA packaging standards, and the shipment is directed to a freight and parcel post address in Bogotá, Colombia, with transportation governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7L1-26-T-889N, issued under a Total Small Business Set-Aside, with a response deadline of August 10, 2026, and an original required delivery date of August 3, 2026. Technical and quality requirements referenced through R and I numbers are incorporated from the DLA Master List, and the contractor must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Removal of government identification from non-accepted supplies is required, and the contract is subject to DLA procurement rules governing simplified and large acquisitions based on the effective revision dates of the technical requirements document.
LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-890W
The contract is for the procurement of one shaft, straight, identified by NSN 3040-01-486-4860, with a delivery requirement of 20 days after award. The solicitation number is SPE7L1-26-T-890W, issued by the Department of Defense through the Land Supply Chain, with performance to occur at Pearl Harbor, Hawaii. The solicitation is open to full and open competition and requires the offeror to be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified third-party assessment organization. Ozone-depleting chemicals are strictly prohibited in any items delivered under this contract, and any substitute chemicals must be submitted for approval unless explicitly authorized by the specification. The offeror must provide a complete technical data package including data for both the approved and alternate parts, as referenced in Table A0648, and must adhere to all product requirements despite the chemical restriction. The response deadline is August 10, 2026, and the point of contact is Kristina Derry, reachable via email or phone for inquiries.
LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
GEAR AND SHAFT SET,
Solicitation # SPE7L4-26-T-5857
This contract is for the procurement of a Gear and Shaft Set for an oil pump used on an air compressor, with the specific part number 1W114884 manufactured by Curtiss-Wright Electro-Mechanical Corp and identified by the NSN 3020-01-004-5128. The requirement is classified as a critical application item and is subject to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The item must comply with all applicable packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with packaging materials restricted to specific types and classes per MIL-B-117. No ozone-depleting chemicals are permitted in any component or manufacturing process, and any substitute materials must be pre-approved unless explicitly authorized by the specifications. The item is to be delivered within five days of contract award, FOB origin, with no variance allowed in quantity and must be shipped to the Egyptian Navy Armament Department in Alexandria, Egypt. The sole quantity ordered is one unit, priced at a total of one SE unit, and is to be shipped via the designated freight forwarder at Amentum Warehouse in Fredericksburg, Virginia. The procurement is linked to Contract ID SPE7L4-26-T-5857, with a required delivery date of December 2, 2024, and is governed by DLA packaging and handling requirements, including palletization and intermediate container specifications. Government use codes and project identifiers tie this acquisition to a larger defense program under Track Project TP 1.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
CAP, LINEAR ACTUATIN
Solicitation # SPE7L1-26-T-890K
The contract is for the procurement of 47 units of a CAP, LINEAR ACTUATING CYLINDER, a metal casting component requiring specialized tooling for production. The item is identified by NSN 3040-00-689-3401 under solicitation SPE7L1-26-T-890K, with a response deadline of August 10, 2026, and a delivery timeframe of 532 days from award. The acquisition is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with a NAICS code of 333613 for Machine Shop, Tool Die and Steel Fabricating. Technical and quality requirements are governed by the DLA Master List, with compliance determined by the revision in effect at the solicitation or award date depending on the acquisition size. Packaging, export control, and removal of government identification requirements are strictly enforced. Technical data associated with this item is subject to ITAR or EAR export controls, limiting access to contractors with JCP certification, completed DOD training, and DLA approval. Distribution and handling of such data must conform to DFARS 252.225-7048, and foreign nationals—regardless of location—cannot access controlled information without authorization. The contracting office is under the Department of Defense’s Land Supply Chain, with performance located in Anniston, Alabama, and primary point of contact listed as Mary Capezzuti.
LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L4-26-T-5858
The contract pertains to the procurement of a spur gear designated by part number S6135-20687-1 with NSN 3020-00-012-6029, under solicitation SPE7L4-26-T-5858, with a total quantity of ten units to be delivered within twenty days from the contract date. The delivery is FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin. Packaging must conform to MIL-STD-2073-1E with specific methods including dry preservation, zero cushioning material, and packaging level B, while marking adheres to MIL-STD-129 without special codes. The item is classified as a critical application item and must comply with DLA packaging requirements and cybersecurity maturity model certification level 2 self-assessment. The gear is sourced from multiple suppliers including BMT Aerospace USA, Triumph Gear Systems, and Sikorsky Aircraft Corporation. The delivery destination is the Argentine Navy in Buenos Aires, and freight routing follows DLA procedures C19 and C20, with transportation handled by multiple forwarders. The contract is a total small business set-aside under NAICS code 333613, managed by the Department of Defense’s Combat Vehicles and Armament office. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates. The point of contact is Anna-Rachelle Betts, and the solicitation was posted on July 29, 2026, with responses due by August 10, 2026. The original required delivery date was April 12, 2021, and the contract includes government-only fields for tracking and distribution.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-890X
The contract solicitation is for two straight shafts identified by NSN 3040-01-486-4695 under solicitation number SPE7L1-26-T-890X, with a delivery requirement of 20 days after award. The item is governed by stringent technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, and all provisions must align with the revision in effect on the solicitation issuance date. Export control regulations under ITAR or EAR apply to associated technical data, restricting dissemination to authorized parties only; recipients must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export-controlled technical data training, and be formally approved by DLA to access the data. Compliance with DFARS 252.225-7048 is mandatory, and disclosure to foreign nationals—包括 in the U.S.—is prohibited without prior authorization. The use of Class I ozone depleting chemicals is strictly forbidden, superseding any conflicting specification provisions, and any substitute materials require prior approval unless explicitly authorized. Configuration changes must be managed through formal engineering change proposals and variance requests, and inspection and acceptance must occur at the origin. Packaging must adhere to DLA standards, and all supplies must be free of government identification if not accepted. The contract is subject to Cybersecurity Maturity Model Certification Level 2 requirements, demanding third-party assessment by a certified organization. The place of performance is Pearl Harbor, Hawaii, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
Federal
30--DAMPER,INERTIA
Solicitation # SPE7L126T889V
The U.S. Department of Defense through DLA Land and Maritime is seeking quotes for three inertia dampers identified by NSN 3040015249770 under solicitation SPE7L126T889V, with delivery required to W1A8 DLA DISTRIBUTION within 161 days after award. The procurement is open to all responsible sources, and only electronic submissions are accepted; hard copies are not available. Approved source identifiers for the item are 97537 JE-1403 ASSEMBLY 6 and 97537 JE140317X26S6L. No specifications, plans, or drawings are provided, and the solicitation is accessible exclusively through the online portal linked in the notice. The response deadline is August 10, 2026, and all quotes must be submitted electronically prior to that time. The solicitation is classified as a combined action under NAICS code 333613 and is not set aside for any specific small business category. Primary inquiries should be directed to the buyer via the email provided in the solicitation, with further details available through the SAM.gov workspace link or by searching the solicitation number on DIBBS.
DLA Land And Maritime

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
Federal
30--TRANSMISSION,MECHAN, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC10
The contract pertains to the procurement of 13 units of a mechanical transmission item designated by NSN 7R-3010-123915959-SX, with delivery terms set at FOB origin and acceptance of early and incremental deliveries permitted. The Government intends to award this contract under sole-source authority per FAR 6.302-1, though it invites all responsible sources to express interest or submit proposals within 45 days of the notice, or 30 days if an existing Basic Ordering Agreement applies. Proposal submissions will be considered only to evaluate potential competition, and the Government retains full discretion to proceed without competition based on its assessment of responses. Contractual documents are deemed issued upon electronic transmission, mail, or facsimile, with acceptance of the contractor’s proposal forming a binding agreement. All referenced military and federal specifications, standards, qualified product lists, and handbooks must be obtained through the DoD Single Stock Point at DAPS in Philadelphia or via the ASSIST-Online portal, with non-electronic requests handled through phone or postal service. The acquisition does not fall under FAR Part 12 commercial item policies, but interested parties may still propose commercial item alternatives within 15 days of notice. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support office in Philadelphia, with primary point of contact listed as Andrew N. Phillips, and the response deadline is September 14, 2026.
Navsup Weapon Systems Support

POSTED

about 16 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333613
New
Federal
LINK
Solicitation # N0010426QFF14
This contract pertains to the procurement of critical shipboard components designated as SPECIAL EMPHASIS Level I material, where failure could lead to catastrophic loss of life, ship systems, or the vessel itself. The material, primarily QQ-N-286 in cold drawn or hot finished annealed and age-hardened form, must meet stringent chemical and mechanical testing requirements, with certifications traceable to individual heat-lot numbers and permanently marked on the parts. All testing, including ultrasonic and dye penetrant inspections, must be performed to approved standards and by specifically designated laboratories, with final certification reports requiring unqualified, signed affirmation of compliance. Traceability is mandatory from raw material through every fabrication stage, requiring consistent marking, segregation of lots, and documented control of subcontracted processes, including weld filler metals and machining operations. Delivery is governed by strict certification and acceptance protocols through the Wide Area Work Flow (WAWF) system, with documentation must be submitted and approved by Portsmouth Naval Shipyard prior to shipment, using designated DODAACs N50286 and N39040. No material may be shipped without formal acceptance, and the contract mandates 100% inspection of all documentation relating to chemical composition, mechanical properties, nondestructive testing, and traceability. The prime contractor must maintain an ISO-9001 quality system aligned with ISO-10012 and ISO/IEC 17025, subject to unannounced government audits and inspections at source. Any deviations or waivers require explicit written approval from the Contracting Officer and must be classified as Critical, Major, or Minor, with full impact assessments provided. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System, with full compliance with Buy American and Small Business subcontracts requirements. All deliveries must occur within 365 days of contract effective date, and the end item is subject to final inspection using zero-defect acceptance criteria.
Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

in 19 days
View Details
NAICS: 333613
New
Federal
30--ACTUATOR,MECHANICAL,NO
Solicitation # SPE7L126T890B
The contract solicitation is for four mechanical actuators under NSN 3040016437376, with delivery required to DLA Distribution Red River within 161 days of award. This is a Small Business Set Aside total, classified under NAICS code 333613, and managed by the Department of Defense through DLA Land and Maritime. The solicitation, numbered SPE7L126T890B, is issued as a request for quotation with no hard copies available and no specifications, plans, or drawings provided. All responsible sources may submit quotes electronically, and only timely submissions will be considered. The approved source for this item is 05448 648064. Quotes must be submitted electronically by the deadline of August 10, 2026, and the solicitation can be accessed via the provided SAM.gov link. Questions should be directed to the primary point of contact via email, as outlined in the solicitation document. The office is located in Columbus, Ohio.
DLA Land And Maritime

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
Federal
25--SPINDLE,WHEEL,DRIVI, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC02
The Government intends to procure three units of a 25-spindle wheel drive component for repair or modification purposes under a sole-source contract authorized under FAR 6.302-1, with no requirement for competitive bidding unless responsive proposals are received within 45 days of the notice or 30 days if awarded under an existing Basic Ordering Agreement. Delivery terms are FOB origin, and early or incremental deliveries are acceptable. Contractual documents are deemed issued upon electronic transmission, mail deposit, or facsimile, with Government acceptance of the contractor’s proposal establishing mutual agreement. All technical specifications, standards, qualified product lists, and military handbooks referenced in the procurement can be accessed via the ASSIST-Online portal at http://quicksearch.dla.mil/ or ordered through the DODSSP website after registering for a customer account; users without internet access may contact the DODSSP Help Desk or mail requests to the Philadelphia address. The Government is not applying FAR Part 12 commercial item acquisition policies but invites interested parties to submit commercial item alternatives within 15 days, noting that responses to this presolicitation notice are for market research purposes only and do not obligate the Government to proceed competitively. The solicitation number is N0038326QPC02, the point of contact is Andrew N. Phillips of the Naval Supply Systems Command in Philadelphia, and responses are due by September 14, 2026.
Navsup Weapon Systems Support

POSTED

about 16 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Revision 2 controls to safeguard Controlled Unclassified Information within the contractor’s systems and environments. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CUI in alignment with federal cybersecurity standards. The contractor must also comply with incident reporting requirements mandated by DFARS 252.204-7012, ensuring timely notification and remediation of any cybersecurity events affecting CUI. All activities must be performed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and the work is classified under NAICS code 541512 for Computer Systems Design Services. The contract is structured as a subcontract and is associated with the Department of Defense’s Land Supply Chain organization. Responses must be submitted by the deadline of August 28, 2026, with the expectation that performance will occur within the defense supply chain environment.
Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.
Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Corrosion ControlThe contract requires comprehensive military-compliant packaging, corrosion prevention, and moisture control measures for a heater parts kit, ensuring all components are protected during storage and transit under demanding operational conditions. All packaging must meet strict defense standards with proper labeling and full documentation to guarantee traceability, readiness, and compliance with military logistics protocols. The scope encompasses every step from initial preservation techniques to final packaging and recordkeeping, with an emphasis on long-term durability and environmental resilience. This is a total small business set-aside subcontract under NAICS code 561910, issued by the Department of Defense’s Land Supply Chain, and is open for response until August 28, 2026. The solicitation is exclusively available to small businesses as defined by the Small Business Administration, and the place of performance and exact delivery location are not specified in the provided details. All work must align with federal acquisition regulations and military-grade specifications, with no flexibility in adherence to preservation and packaging standards.
Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335999
New
DIBBS
Component Supply for Heater AssemblyThe contract seeks the supply of critical components including heating elements, thermostats, housings, and electrical connectors specifically designed to meet military specifications and stringent quality standards for integration into heater assemblies. All materials must adhere to defined technical requirements and undergo rigorous testing to ensure reliability under demanding operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335999 designating it under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, with performance expected to support the Department of Defense’s Land Supply Chain through undisclosed but mission-critical locations. Compliance with federal acquisition regulations and defense-specific quality protocols is mandatory, and all suppliers must be certified to handle sensitive military-grade components under controlled manufacturing practices.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 333414
New
DIBBS
Manufacture of Vehicular Compartment Heater Parts KitThe contract requires full manufacturing, assembly, testing, and packaging of the vehicular compartment heater parts kit designated by NSN 2540-01-096-5023, strictly in accordance with military specifications and source control drawings. All work must be performed to meet rigorous defense standards, ensuring the component’s reliability and performance under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The project falls under NAICS code 333414, which classifies it within the heating equipment manufacturing sector, and is managed by the Land Supply Chain division of the Department of Defense. The opportunity was posted on July 29, 2026, with a response deadline of August 28, 2026, providing potential bidders a four-week window to prepare and submit proposals. The place of performance and point of contact details are not specified, but the primary location of work is expected to align with the contractor’s facility capable of meeting military-grade production requirements. All submissions must be made through the official DIBBS platform, and compliance with all technical, quality, and regulatory standards is mandatory for award consideration.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 30 days
View Details
NAICS: 333999
New
DIBBS
Small Business Subcontracting Participation (Socioeconomic Support)Small businesses are invited to participate in subcontracting opportunities to support a prime contractor’s socioeconomic evaluation score under a Department of Defense solicitation tied to NAICS code 333999. This subcontracting initiative is designed to enhance the prime contractor’s standing in federal socioeconomic assessments by integrating qualified small businesses into the supply chain, though no specific set-aside designation is applied. The opportunity was posted on July 29, 2026, with responses required by August 27, 2026, and is managed by the Land Supply Chain organization under the Office of the Secretary of Defense. While no place of performance or point of contact details are specified, interested small businesses must engage directly through the provided DIBBS portal to pursue participation and align with the prime contractor’s subcontracting goals. The effort does not involve a formal contract award but rather enables small firms to contribute to a larger bid’s compliance and competitiveness through verified subcontracting commitments.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 29 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight Shipping (FOB Origin)The contract pertains to the arrangement and execution of domestic freight shipping services from various points of origin within the United States to DLA Distribution New Cumberland, Pennsylvania, under FOB origin terms, meaning the responsibility for the shipment transfers to the buyer upon delivery to the carrier at the origin. This is a subcontract solicitation under the NAICS code 484220, which categorizes it within the truck transportation sector, specifically for general freight and local hauling. The opportunity is posted by the Department of Defense through its Land Supply Chain office, indicating that the work supports military logistics and supply chain operations. The response deadline is set for August 27, 2026, and the solicitation is available via a public portal for interested parties to review and submit proposals. There is no specific set-aside designation listed, suggesting the contract is open to all qualified contractors, regardless of business size or certification status. Performance is required solely within the U.S., with the final destination fixed at New Cumberland, PA, and no additional point of contact details are provided in the posting.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 11 hours ago

DEADLINE

in 29 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for cylinder assemblies in full compliance with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, ensuring all components meet rigorous military specification for handling, storage, and transportation. All work must adhere strictly to these technical guidelines to guarantee the integrity and traceability of the assemblies throughout the supply chain, with particular attention to labeling, protective materials, environmental preservation, and unit identification. This is a subcontract opportunity issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a solicitation posted on July 29, 2026, and a mandatory response deadline of August 27, 2026. The North American Industry Classification System code 493190 indicates the focus on warehousing and storage services, though the specific scope centers on specialized military packaging activities. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS platform for interested parties to review full requirements and submit proposals.
Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333999
New
DIBBS
Supply of Cylinder Assembly, Actuating, Linear (NSN 3040-01-642-5340)The contract seeks the procurement and delivery of 154 new, unused Cylinder Assembly, Actuating, Linear units identified by NSN 3040-01-642-5340, with the potential to expand to a maximum of 308 units if required. All units must fully comply with military specifications and meet stringent packaging standards to ensure readiness for deployment. The solicitation is issued under the NAICS code 333999 and is structured as a subcontract within the Department of Defense’s Land Supply Chain. Responses are due by August 27, 2026, with the opportunity formally posted on July 29, 2026. The place of performance and specific delivery location are not detailed in the available data, and no set-aside provisions or small business preferences are indicated. The contract is administered by the Department of Defense through its DLA DIBBS portal, with no direct point of contact listed for inquiries.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332722
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-889U
The contract pertains to the procurement of a CAP, FILLER OPENING with NSN 5340-01-371-2617 and part number 695155-1, under solicitation SPE7L1-26-T-889U, with a total quantity of 13 units to be delivered in 161 days from the award date, with delivery terms FOB origin and inspection and acceptance points at the destination. The item is classified as a commercial item, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. The supplier must meet all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and with RP001 for DLA packaging, requiring commercial packaging under ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 applies. Palletization must follow DLA guidelines, and the delivery address is DLA Distribution Warner Robbins, Robins AFB, GA. The contract is a total small business set-aside under NAICS code 332722, with a response deadline of August 10, 2026, and the required ship date is January 19, 2027. Documentation for source approval must be submitted per RC001, and all technical, quality, and packaging requirements are binding and take precedence over any conflicting commercial standards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335910
New
DIBBS
BATTERY ASSEMBLY
Solicitation # SPE7L1-26-Q-1375
This contract outlines the procurement of 470 units of a battery assembly identified by NSN 6140-01-737-7804 and part number LE1912MHIS, supplied by three qualified manufacturers: MAGNUM ELECTRONICS, INC, TAKAT LLC, and LOGIC ENERGY TECHNOLOGIES, INC. The item is classified as a Commercial Off the Shelf product with adequate catalog data available for evaluation, and it is subject to a strict 60-month Type I shelf life that is non-extendable. Compliance with DLA packaging, marking, and shipping standards is mandatory, including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and RP001 for DLA-specific packaging requirements. The contract incorporates technical and quality requirements referenced from the DLA Master List, and inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated. Critical, major, and minor attributes must be verified at specified levels or AQLs, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with additional containment requirements for portable mercury-containing devices. The delivery is FOB destination, with a firm delivery deadline of 250 days from award, and inspection and acceptance occur at the destination point. The item is to be palletized and shipped to the designated receiving warehouse in Tracy, California, in accordance with DLA procedures and hazardous material handling protocols under IP025. The contract explicitly prohibits quantity variance—zero tolerance for over or under shipment. All packaging and marking must reflect the Type I shelf-life code and comply with hazardous communication standards, including FED-STD-313E for SDS. The procurement is a total small business set-aside under NAICS code 335910, and the solicitation issued on July 29, 2026, with a response deadline of August 7, 2026. The end-use customer requires delivery by December 7, 2026, and the point of contact for inquiries is Sophia Finotti of the Department of Defense’s Land Supply Chain.
Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333995
New
DIBBS
CYLINDER ASSEMBLY, ACTUATING, LINEAR
Solicitation # SPE7L1-26-R-0111
The contract is for the procurement of 154 units of the Cylinder Assembly, Actuating, Linear, identified by NSN 3040-01-642-5340, with a firm fixed price term and zero variance in quantity—no additions or reductions are permitted. The item is classified as a critical application item and must comply with DLA’s packaging requirements under RP001, including adherence to MIL-STD-2073-1E for prep, preservation, wrapping, cushioning, and unit container specifications, as well as MIL-STD-129 for marking with no special marking codes. Ozone-depleting chemicals are strictly prohibited, and any substitutions must be approved unless explicitly authorized by the specification. Delivery is required within 276 days after the order date, with FOB origin, inspection and acceptance occurring at the destination. Two delivery points are specified: one at the DLA Distribution facility in New Cumberland, Pennsylvania, for 68 units, and another at the DLA Distribution facility in Tracy, California, for 86 units. All shipments must follow DLAD Proc Note C19 for transportation and C20 for first destination logistics. The contract, issued under solicitation SPE7L1-26-R-0111, references the DLA Master List of Technical and Quality Requirements for compliance, and the supplier must be JARP Industries, Inc. with part number 151234B. The required delivery date is February 6, 2027, and all technical and quality standards are controlled by the version of the DLA Master in effect on the solicitation issue date.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 29 days
View Details