Generac Diesel Generator

Clemson University seeks an experienced supplier to provide Generac Diesel Generator and setup services as outlined below. All submissions must be made online. Quotes submitted prior to this solicitation are not a substitution for submitting your online bid. Do not include terms and conditions with your bid submission. No red lines to the contract will be accepted during the submission process. If there are terms you cannot agree to or wish to have changed, you must request that by submitting a question or request for modification to the scope to the Procurement Officer during the Deadlines for Question process, and Clemson will consider changes. However, to ensure all offerors offer the same scope, red lines or caveats included in your submission may make your offer non-responsive and unable to be considered. In order to submit an offer, you must first register/login to Clemson Bidding at https://clemson.ionwave.net/VendorRegistration.aspx Registration is recommended no later than 48 hours prior to bid close. You are highly encouraged to submit your bid prior to the closing date. Delivery to Clemson SC is required.    Attachment: See electrical drawings, 23715L3 ELECTRICAL DRAWINGS 4-15-25.pdf. This document is located in this online bidding system under the attachments tab.  
Generator Set: Quantity 1 - Generac Industrial diesel engine-driven generator set with turbocharged/aftercooled 6-cylinder 6.7L engine, consisting of the following features and accessories: • Stationary Emergency-Standby rated • 150 kW Rating, wired for 277/480 VAC Three Phase, 60 Hz • Permanent Magnet Excitation • UL2200 • SCAQMD • Level 2 Acoustic Enclosure, Steel    o Baked-On Powder Coat Finish    o AC/DC Enclosure Interior LED Lighting Kit    o 8 Position Load Center • 24" 322 Gallon Double-Wall UL142 Basetank    o Mechanical fuel level indicator gauge    o Electronic fuel level sender • MLCB, 80% rated, LSI Electronic Trip 200 amp Shunt Trip Auxiliary Contacts, 1 Set • MLCB, 80% rated, LSI Electronic Trip 110 amp Shunt Trip Auxiliary Contacts, 1 Set • DSE G8601 Digital Genset Controller • 21 Light Remote Annunciator Surface-Mount Integral 8 Function Relay Board • Remote Emergency Stop Switch, Break-Glass, shipped loose • Battery Charger, 10 Amp, NFPA 110 compliant, installed • 110 AH, 925 CCA Group 31 Batteries, dual-paralleled, with rack, installed w/ Battery Heating Pad • Engine Coolant Heater, 1500W • (Dual) 120V GFCI and 240V Outlet • 3 Owner's Manuals • 2-Year Comprehensive Warranty Automatic Transfer Switch: Quantity 1 – Optional Standby Automatic Transfer Switch consisting of the following features and accessories: • Open transition, 200 Amp, 3 pole, 120/208 VAC three phase, solid neutral, 60 Hz, withstand rating of 35KA and 2 or 3-Wire Start Circuit • CTs for Integrated Metering • NEMA 1 Enclosure • 2-Year Comprehensive Warranty Quantity 1 – Life Safety Automatic Transfer Switch consisting of the following features and accessories: • Open transition, 200 Amp, 3 pole, 277/480 VAC three phase, solid neutral, 60 Hz, withstand rating of 35KA and 2 or 3-Wire Start Circuit • CTs for Integrated Metering • NEMA 1 Enclosure • 2-Year Comprehensive Warranty Quantity 1- Manual Transfer Switch consisting of the following features and accessories: 200A, 3 pole, 4 wire, withstand rating of 22KA, with AUX contact to indicate when the permanent generator is disconnected from the emergency system. NEMA 3R enclosure. Other: Quantity 1 - Start up Performed by a Factory Authorized Technician Quantity 1 - Freight