Top

General Commercial Supplies Supply (NSN-Based Procurement)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

423810 - Construction and Mining (except Oil Well) Machinery and Equipment Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Ongoing supply of NSN-identified commercial items under an IDIQ contract structure with annual quantity estimates.

Similar Contracts

Same NAICS industry code

NAICS: 423810

New

DIBBS

Sustainable and Environmentally Compliant Product SupplyThe contract seeks the supply of eco-friendly, recyclable, or energy-efficient packaging materials that comply with federal sustainability standards, including Executive Order 13693 and clause 52.223-23, ensuring all products meet rigorous environmental requirements set by the Department of Defense. The materials must support sustainable procurement goals and be suitable for use across federal operations, with strict adherence to lifecycle environmental impact metrics and waste reduction targets. Subcontractors are expected to demonstrate proven capability in delivering compliant packaging solutions and must align their manufacturing and sourcing practices with federal green procurement guidelines. This subcontract opportunity, posted on July 23, 2026, with a response deadline of August 3, 2026, is classified under NAICS code 423810 for Plastic Packaging and Containers Merchant Wholesalers. Performance is required at Tracy, California, with a ZIP code of 95304-5000. The contracting activity falls under the Fluid Handling Division of the Department of Defense, indicating the materials will likely support logistics, transportation, or operational needs within defense supply chains. While no set-aside designations are specified, interested parties must respond through the official DIBBS portal using the solicitation reference SPE7M426T275G to be considered for award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

MIL-STD-129 Packaging & Labeling ServicesThe contract requires compliant packaging, labeling, and bar-coding services aligned with MIL-STD-129 standards to support military logistics operations under the Department of Defense. All shipments must incorporate U/I and QUP marking, ensuring precise automated tracking and seamless integration with DLA supply chain systems. The work must meet strict federal specifications to facilitate accurate inventory management, receipt, and distribution across military channels. Submitted as a subcontract under NAICS code 423810, the opportunity has a response deadline of August 6, 2026, and pertains to the Maritime Supply Chain division. Performance is expected to support national defense logistics without geographic restriction, with all required documentation and labeling procedures executed to ensure full compliance and operational readiness.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging, Labeling, and Barcoding ServicesThe contract requires full compliance with MIL-STD-129 standards for the packaging, labeling, and application of Data Matrix barcodes on electrical contact assemblies destined for military use. All packaging must meet rigorous military specifications to ensure durability, traceability, and compatibility with defense logistics systems, with each unit labeled to include mandatory information such as item identification, quantity, lot number, and unique barcoded data for seamless scanning and inventory management throughout the supply chain. Services must be performed with precision to support just-in-time delivery and readiness requirements, and all work must be completed to exacting standards without deviation from the established technical and procedural guidelines. This is a subcontract opportunity under the Department of Defense’s Maritime Supply Chain, with a NAICS code of 423810 indicating classification under Wholesale Trade of Miscellaneous Durable Goods. The solicitation was posted on July 22, 2026, and bids must be submitted by August 6, 2026. Performance is expected to support national defense logistics operations, though the exact delivery location is not specified. Interested parties must align their capabilities precisely with military packaging protocols and be prepared to demonstrate full adherence to Data Matrix barcode accuracy and labeling requirements, as non-compliance could result in rejection of shipments and disruption to critical supply lines.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Domestic Sourcing & Regulatory Compliance (Buy American / Berry Amendment)The contract requires the sourcing and documentation of domestically produced materials to ensure full compliance with the Buy American Act and the Berry Amendment. This subcontract mandates strict adherence to federal regulations governing the origin of materials used in defense-related supply chains, emphasizing the use of U.S.-made components and finished goods. All submissions must include verifiable proof of domestic manufacturing, including certificates of origin and supply chain traceability documentation to validate compliance at every tier. Performance is centered in Greensboro, North Carolina, with a response deadline of July 29, 2026, and the solicitation falls under NAICS code 423810 for Wholesale Trade of Miscellaneous Durable Goods. The contract is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and participants must be prepared to meet rigorous audit readiness standards. No set-aside provisions are specified, meaning all eligible domestic suppliers may compete, but only those capable of providing complete, auditable documentation of U.S. origin materials will be considered.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Domestic Sourcing and Supply Chain Verification (Berry Amendment Compliance)All components under this subcontract must be domestically sourced in strict compliance with the Berry Amendment, requiring full adherence to U.S. manufacturing and material origin requirements. The contractor is responsible for maintaining comprehensive traceability records throughout the supply chain and providing official origin certifications to verify that every item meets the mandatory domestic content standards. This agreement falls under NAICS code 423810 and is issued by the Defense Logistics Agency under the Department of Defense, with performance obligations tied to ensuring end-to-end supply chain integrity for defense-related goods.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Packaging and Preservation ServicesThe contract entails specialized cleaning, drying, and packaging services for gaskets in strict accordance with MIL-DTL-117 specifications and preservation code 33, ensuring long-term protection and readiness for military use. All gaskets must be processed to remove contaminants, thoroughly dried, and sealed in UV-protective opaque packaging to prevent degradation from light exposure. If the gaskets contain mercury or other hazardous components, secondary containment measures must be implemented to ensure safe handling, transport, and storage. The work falls under NAICS code 423810 and is classified as a subcontract managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 16, 2026, and performance is expected to adhere to exacting defense standards without geographic restriction specified.

Defense Logistics Agency

POSTED

DEADLINE

Loader, BackhoeThe State of New Mexico is seeking to establish a statewide price agreement for the procurement of loaders and backhoes under solicitation number StateOfNewMexico-70-00000-26-00002, available to all authorized state agencies, commissions, institutions, political subdivisions, and local public bodies governed by the State Procurement Code. Only authorized dealers with a physical presence in New Mexico, including dedicated parts and service facilities, are eligible to respond. Bidders must employ Original Equipment Manufacturer certified mechanics capable of servicing all engine and powertrain components to ensure continuous operational support across the state. The solicitation was posted on July 16, 2026, with responses due by August 7, 2026, and is managed by the New Mexico Environment and Natural Resources Department’s State Parks Division. Point of contact for inquiries is Patrick Gardner, reachable via email at patrick.gardner@gsd.nm.gov.

POSTED

DEADLINE

Packaging and Kitting ServicesThe contract awards packaging, kitting, and labeling services for defense-related supplies to Park City Packaging in Stratford, Connecticut, in direct support of the Defense Logistics Agency’s operational needs. All work must adhere to stringent military compliance standards, ensuring that items are properly prepared for storage, transport, and field deployment under Department of Defense specifications. The services are executed under a subcontract structure with a NAICS code of 423810, reflecting wholesale trade in miscellaneous durable goods, and the performance occurs at the contractor’s facility in Stratford, CT. The contract was posted in July 2026 and is linked to the DIBBS system under award number SPE4A623PR113, indicating its integration within the broader DLA supply chain infrastructure.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Engine Parts Kit (Wholesale Distribution)The contract obligates the supplier to procure, assemble, package, label, and deliver a pre-assembled military-spec engine parts kit in full compliance with Department of Defense logistics standards. All components must meet rigorous military specifications and be sourced through verified channels to ensure compatibility, durability, and operational readiness. The kit is intended for wholesale distribution and must be prepared for seamless integration into DoD supply chains, with packaging and labeling adhering strictly to standardized military protocols for identification, traceability, and handling. Delivery is governed by Defense Logistics Agency requirements and must be executed according to scheduled timelines, with full documentation supporting each phase of the process. The contract falls under NAICS code 423810, classifying it as wholesale distribution of automotive parts and supplies, and is structured as a subcontract within the broader Defense Department procurement framework. Performance is expected at locations determined by DLA’s logistics network, with no specified place of performance listed. The solicitation is active under contract number SPE7LX22D0068 and is accessible via DIBBS for oversight and tracking purposes.

Defense Logistics Agency

POSTED

DEADLINE

Notice is hereby given that the Wilkinson County Board of Supervisors will accept sealed bids for the purchase by the County of a used wheel loader, 2023 or later year model, not more than 2500 hours, meeting the bid specifications. Sealed bids shall beThe Wilkinson County Board of Supervisors is soliciting sealed bids for the purchase of a used wheel loader that must be a 2023 model year or newer and have no more than 2500 operating hours, with all equipment required to meet specific bid specifications. Bids must be submitted in sealed envelopes and received by the deadline of July 27, 2026, at 6:00 PM, with the solicitation identified by the number 21-20260623102805 WCBS. The notice was posted on July 14, 2026, and the procurement falls under the jurisdiction of the Mississippi Public Procurement Agency, operating within the state of Mississippi. There is no set-aside designation specified, and all bids will be evaluated based on compliance with the stated technical and operational requirements.

POSTED

DEADLINE

Domestic Material Sourcing and Supply Chain ComplianceThe contract seeks subcontractors to supply domestically sourced raw materials and components that fully comply with the Berry Amendment and the Buy American Act, ensuring all materials originate from the United States and meet federal procurement standards for domestic content. This requirement applies to all stages of supply, from initial sourcing through final delivery, and is critical for supporting national defense manufacturing needs under the Department of Defense’s Active Devices Division. All participants must demonstrate verifiable compliance with these regulations, and failure to meet sourcing requirements will result in disqualification. The solicitation is open for responses until July 29, 2026, with the opportunity posted on July 14, 2026, and falls under NAICS code 423810 for wholesale trade of miscellaneous durable goods. As a subcontract opportunity, it is intended for companies aligned with prime contractor supply chains and must be managed in accordance with federal acquisition regulations governing domestic procurement. The place of performance and point of contact details are not specified, but submissions must be made through the official DIBBS platform linked in the contract data. Compliance documentation, including certifications and audits of supply chain sources, will be required to validate adherence to domestic sourcing mandates.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Packaging and Labeling Services for Government Shipments

Defense Logistics Agency

POSTED

24 days ago

DEADLINE

N/A

View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

New

DIBBS

ADMINISTRATION SET, INTThe contract pertains to an Administration Set, Int with the NSN 6515-01-652-5203, solicited under number SPE2DS-26-T-273C by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and seeks a single unit of the specified item. The procurement is classified as a federal solicitation with no specific set-aside designation, and the place of performance and office address details are not provided. All correspondence and submissions must be directed through the designated DIBBS portal linked in the contract data, and no point of contact information is listed.

POSTED

DEADLINE

SODIUM CHLORIDE INJECTThe contract pertains to the procurement of Sodium Chloride Inject, identified by NSN 6505-01-330-6269, with a requested quantity of two units under Purchase Request 7017618152. The solicitation is issued by the Defense Logistics Agency under the Department of Defense, with the solicitation number SPE2DP-26-T-4286, posted on July 26, 2026, and requiring responses by August 3, 2026. This is a federal solicitation with no specific set-aside classification, and the item is intended for delivery to a location yet to be specified within the United States. The procurement process is conducted through the DIBBS system, and all inquiries and submissions must be submitted via the official online portal linked to the solicitation.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

FILTER ASSEMBLY, ELECTRThe contract involves the procurement of 18 units of a FILTER ASSEMBLY, ELECTR with NSN/Part Number 5915-01-533-8556, issued under solicitation number SPE7M5-26-U-0055 by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 26, 2026, and responses are due by August 10, 2026, with no set-aside provisions specified. The procurement is categorized as federal and does not include a NAICS code or detailed place of performance information. All performance and delivery logistics are managed by the agency without designated point of contact details listed. The official solicitation can be accessed via the DIBBS portal using the provided UI link.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

SEAT, WATER CLOSETThe contract pertains to the procurement of 18 water closet seats with the NSN part number 4510-01-417-4885, issued under solicitation number SPE8E8-26-T-4852 by the Defense Logistics Agency, a department within the U.S. Department of Defense. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, indicating a window of approximately two weeks for vendors to submit bids. The purchase request number associated with this acquisition is 7017585885, and the item is categorized under a federal procurement with no specific set-aside classification or NAICS code provided. All performance and delivery details are managed under the federal contracting framework, with no designated city, state, or ZIP code for the place of performance, suggesting the item may be distributed to multiple military or government locations across the United States. Information regarding the point of contact is not listed, and further details can be accessed via the provided DIBBS portal link.

Pottery, Ceramics, and Plumbing Fixture Manufacturing

POSTED

DEADLINE

SHAFT, SHOULDEREDThe contract is for the procurement of 259 SHAFT, SHOULDERED units identified by NSN 3040-01-356-6837 under solicitation number SPE7L4-26-U-1002. The request was issued by the Defense Logistics Agency under the Department of Defense, and the procurement is designated as a federal action with no specific set-aside classification. The solicitation was posted on July 26, 2026, with responses due by August 10, 2026. The place of performance and office address details are not specified, but the contract is governed under U.S. jurisdiction. Interested parties can access additional information through the official DIBBS portal using the provided UI link.

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT, SPThe contract pertains to the procurement of two SEAL ASSEMBLY, SHAFT, SP units identified by NSN/Part Number 4320-01-584-1806 under Purchase Request 7017525600. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, bears the solicitation number SPE7M0-26-T-018T and was posted on July 26, 2026, with a response deadline of August 6, 2026. The contract type is classified as a solicitation and is open to federal entities with no specific set-aside designation. No detailed point of contact or physical performance location is provided, and the procurement is processed through the DIBBS platform, where interested parties can access the full solicitation details via the provided UI link.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

CONTACT, ELECTRICALThe contract solicitation is for electrical contacts with NSN 5999-00-147-7933, requesting a quantity of 651 units under solicitation number SPE7M5-26-T-353S. The opportunity is issued by the Defense Logistics Agency under the Department of Defense and is classified as a federal solicitation with no specific set-aside designation. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, giving vendors approximately eleven days to submit proposals. The place of performance and office address details are not specified, but the contracting activity is based in the United States. Interested parties must respond through the official DIBBS portal using the provided UI link to access the complete solicitation details and submission requirements.

Electronic Connector Manufacturing

POSTED

DEADLINE

INSERTThe contract pertains to the procurement of a single unit with NSN 3040-01-542-1286 under Purchase Request 7017607452, issued by the Defense Logistics Agency under the Department of Defense. The solicitation, identified by number SPE7L1-26-T-876N, was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a competitive tender process for federal acquisition. The contract type is classified as a solicitation with no specific set-aside provisions assigned, and no NAICS code is provided. The place of performance and office address details are unspecified, though the contracting entity operates within the United States. Interested parties may submit responses through the official DIBBS platform using the provided UI link for further details and documentation.

POSTED

DEADLINE

VALVE, RELIEF, PRESSUA relief valve with the NSN 4820-01-473-7464 is being procured under solicitation SPE7MC-26-T-155C by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and seeks a quantity of 41 units. The procurement is classified as a federal solicitation with no set-aside preferences indicated, and the place of performance and office details are unspecified. Interested parties must submit responses through the DIBBS platform using the provided uiLink before the deadline. The item is categorized under pressure relief valve specifications and is intended for use in federal defense-related systems.

Industrial Valve Manufacturing

POSTED

DEADLINE

NUT, SELF-LOCKING, CAThe contract pertains to the procurement of 29 self-locking nuts, designated by the NSN 5310-01-442-7733, under solicitation number SPE4A5-26-T-309E. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. The requirement is classified as a federal solicitation, with no specific set-aside or NAICS code indicated, and the place of performance and point of contact details are not provided. The procurement is intended for U.S. government use, and submissions must be made through the official DIBBS platform via the provided link.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

PIPE ASSEMBLY, METALThe contract is for a metal pipe assembly with NSN 4710-01-329-6443, solicited under SPE7M4-26-T-286N by the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and a single unit quantity of one item is requested. The nature of the procurement is classified as a federal solicitation with no specific set-aside designation, and the place of performance and office address details are not specified, indicating the delivery location may be determined post-award. The procurement is managed through the DIBBS system, and interested parties can access the full solicitation via the provided UI link.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

STARTER, ENGINE, HANDThe contract is for the procurement of 485 units of a starter, engine, hand with NSN 2990-01-323-0307, issued by the Defense Logistics Agency under the Department of Defense. The solicitation, numbered SPE7L5-26-T-4624, was posted on July 26, 2026, with a response deadline of August 6, 2026, and is categorized as a federal solicitation with no specific set-aside classification. The item is intended for U.S. government use, with no designated place of performance specified beyond the country code US, and the procurement is managed through the DLA’s DIBBS platform, accessible via the provided link. The contract does not list a point of contact or detailed office address, indicating standard federal procurement protocols are in place.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days

View Details