Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

General Construction Support and Site Management

Active

Federal

Response Deadline09/09/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks qualified small businesses to provide comprehensive construction support and site management services under federal standards, with a focus on superintendent oversight, site cleanup, safety compliance, and coordination of subcontractors. All work must align with USDA ARS AFM APD requirements and be performed at the designated location in Albany, California, with a zip code of 94710. The opportunity is designated as a Small Business Set Aside under NAICS code 238990, meaning only small business concerns eligible under the SBA’s size standards may respond. The solicitation was posted on August 7, 2026, and responses are due by September 9, 2026, at 9:00 PM Eastern Time. Contractors must demonstrate proven experience in managing federal construction sites, ensuring adherence to safety regulations, and maintaining efficient workflow among multiple subcontractors. Failure to meet these standards could result in contract termination or financial penalties.

General Info

Small business set aside for construction support and site management in Albany, CA, per USDA ARS standards, due Sept 9, 2026.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Albany, CA, 94710, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 09:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Superintendent services, site cleanup, safety compliance, and coordination of subcontractors under federal construction standards.

Similar Contracts

Same NAICS industry code

Asphalt Leveling and Low Spot Correction

Department of Accounting and General Services

POSTED

about 14 hours ago

DEADLINE

Asphalt Crack Sealing and Localized Repairs

Department of Accounting and General Services

POSTED

about 14 hours ago

DEADLINE

Temporary Utilities & Site ProtectionThe contract titled Temporary Utilities & Site Protection outlines the provision of temporary heat, electric power, fencing, and cold weather protection services required during various construction phases. These services are essential to maintain site operational integrity, ensure worker safety, and support uninterrupted construction activities under adverse environmental conditions. The work must be performed in alignment with the project's timeline, with all equipment and materials installed, maintained, and removed as needed throughout the construction lifecycle. The contractor is expected to deliver reliable, scalable, and efficient temporary infrastructure that meets industry standards for safety and performance. This is a subcontract opportunity posted by the Georgia Institute of Technology under NAICS code 238990, which pertains to other specialty trade contractors. The solicitation was published on August 7, 2026, with a response deadline of August 28, 2026. While the exact location of performance is unspecified, the work is expected to occur at one or more Georgia Tech construction sites. The contract does not indicate a set-aside designation or specific eligibility requirements beyond standard subcontracting conditions. Interested parties must submit proposals prior to the stated deadline, and all services must be fully compliant with site-specific safety protocols, environmental regulations, and construction schedules.

Georgia Institute of Technology

POSTED

about 16 hours ago

DEADLINE

General Conditions & Site ManagementThe contract under the title General Conditions & Site Management pertains to the provision of temporary facilities, site security, safety programs, necessary permits, and administrative support required during the construction phase. It is issued as a subcontract by the Georgia Institute of Technology under the NAICS code 238990, which classifies it within other construction-related services. The scope encompasses the full spectrum of logistical and operational support needed to maintain a secure, compliant, and efficient construction environment, ensuring all regulatory and safety standards are met throughout the project duration. All services must be delivered in coordination with the project timeline and site-specific requirements. The solicitation was posted on August 7, 2026, with a response deadline of August 28, 2026, indicating a relatively short procurement window. The place of performance and specific geographic details are not provided, but the performance location is tied to a construction project managed by Georgia Institute of Technology in the state of Georgia. The contract does not include a set-aside designation, suggesting it is open to all eligible subcontractors without restrictive classification. Interested parties must respond through the provided state portal by the stated deadline to be considered, and all proposals must demonstrate proven capability in delivering integrated site management services under construction conditions.

Georgia Institute of Technology

POSTED

about 16 hours ago

DEADLINE

Vault Door Replacement

Solicitation # TMD21-FMO-0044367

The Texas Military Department is soliciting proposals to replace two class 3 vault doors at the San Marcos Armory with a single class 5 vault door, enhancing security compliance and operational efficiency. This procurement is part of a facility upgrade initiative aimed at meeting current safety and threat mitigation standards. The solicitation, identified as TMD21-FMO-0044367, was posted on August 7, 2026, with a firm response deadline of August 24, 2026. Performance of the work is expected to occur entirely at the San Marcos Armory in Texas, and the contract will be awarded to a qualified vendor capable of meeting the technical specifications for a class 5 vault door installation. The Texas Military Department, acting under its State and Local Government (SLED) procurement authority, is the issuing agency with Dario Thomas designated as the primary point of contact for inquiries and submission details. Proposals must demonstrate capability in vault door procurement, structural integration, and compliance with federal and state security mandates.

Texas Military Department

POSTED

about 17 hours ago

DEADLINE

DOC-27-018 Puckett Greenhouse Repairs - Deerfield Correctional Center

Solicitation # QQ-125961

The Virginia Department of Corrections is soliciting bids for repairs to the Puckett Greenhouse at the Deerfield Correctional Center under solicitation number QQ-125961. The posting was made on August 7, 2026, with a deadline for responses set for September 9, 2026, at 3:00 PM. A mandatory site visit is required, and contractors must consult the full solicitation document for specific details regarding access, conditions, and scope of work. The contract is classified under a SLED organization type and is solely for performance at the Deerfield Correctional Center in Virginia. All inquiries should be directed to Cynthia Creed, the point of contact, via email at cynthia.creed@vadoc.virginia.gov or phone at 804-887-8330. The procurement does not specify a NAICS code or set aside status, and interested parties must access the full solicitation through the provided vendor portal link for further information and submission requirements.

Department of Corrections

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Asphalt Pavement Milling and Removal

ALCORN STATE UNIVERSITY

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Demolition and Site ClearingThe contract calls for the complete removal of existing structures and debris, followed by site grading and preparation to support new construction activities. This work is classified under NAICS code 238990 and is structured as a subcontract opportunity issued by the City of Independence in Missouri. The solicitation was posted on August 7, 2026, with a firm deadline for responses set for August 20, 2026, at 7:00 PM. All work must be performed at the designated project site within the City of Independence, though specific location details are not provided. The contract does not specify a set-aside type or indicate whether any preferences apply to small businesses or other categories of contractors. All interested parties must submit proposals through the City of Independence's public procurement portal by the stated deadline.

City of Independence

POSTED

about 19 hours ago

DEADLINE

Subcontract Management & DBE/MBE/WBE Compliance

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Striping and Pavement MarkingThe contract encompasses the application of pavement markings including lane lines, turn arrows, and crosswalks following the completion of road resurfacing and turn lane construction projects. This work is required to ensure clear, safe, and compliant traffic guidance for road users after infrastructure improvements have been made. The scope is strictly limited to marking activities and does not include any additional construction or resurfacing tasks. The solicitation is classified as a subcontract under NAICS code 238990, which pertains to other heavy and civil engineering construction specialties. It is issued by the Lamar County Board of Commissioners in Georgia with a response deadline of September 4, 2026. The contract will be performed at various locations within Lamar County, with performance details specified at the project level after award. All bidders must meet the technical and regulatory requirements for pavement marking work and must be prepared to coordinate with existing construction schedules to ensure seamless integration of markings after surface work concludes.

Lamar County Board of Commissioners

POSTED

about 19 hours ago

DEADLINE

Asphalt PatchingThe contract pertains to the localized repair of deteriorated pavement sections using hot-mix asphalt patching methods that comply with Georgia Department of Transportation specifications. Work will focus on targeted patching efforts to restore pavement integrity in areas exhibiting signs of wear or damage, ensuring durability and safety for road users. All materials and techniques must meet established state standards for longevity, compaction, and surface finish, with performance expected to withstand local environmental and traffic conditions. The solicitation is issued as a subcontract under NAICS code 238990 for other specialty trade contractors, with a response deadline of September 4, 2026, and was posted on August 7, 2026. The contracting entity is Lamar County Board of Commissioners in Georgia, and while specific performance location details are not provided, the work is confined to county-maintained roadways. Bidders must be prepared to adhere to GDOT guidelines without deviation and are expected to manage logistics, labor, and material procurement to complete repairs efficiently and within regulatory compliance.

Lamar County Board of Commissioners

POSTED

about 19 hours ago

DEADLINE

Site Preparation and Ground Modification

Department of Economic Development

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

Operator Training DeliveryThis contract requires the delivery of on-site or remote operator training for USDA personnel focused on the safe and effective use of a new tractor, covering comprehensive safety procedures and operational best practices. The training must be tailored to ensure USDA staff are fully proficient in handling the equipment under various conditions, with an emphasis on minimizing risks and maximizing efficiency. The work is to be performed primarily in Tifton, Georgia, with flexibility for remote delivery as needed, and must comply with federal standards for agricultural equipment training. The contract is classified as a Small Business Set Aside under NAICS code 611430, meaning only small business concerns are eligible to bid, and it is structured as a subcontract. It was posted on August 7, 2026, with responses due by August 24, 2026, and is issued by the U.S. Department of Agriculture’s Agricultural Research Service, specifically under the Auburn Field Manufacturing and Processing Division. The goal is to enhance operational readiness and safety compliance among USDA personnel by equipping them with the necessary skills to operate the new tractor correctly, ensuring long-term equipment reliability and workplace safety.

Professional and Management Development Training

POSTED

DEADLINE

Delivery and Logistics Services (F.O.B. Destination)The contract requires the transportation of a new agricultural tractor from the dealer or original equipment manufacturer to the USDA-ARS Southeast Watershed Research Lab in Tifton, GA, or to a nearby research farm located within ten miles, with delivery terms defined as F.O.B. destination, meaning the seller assumes all costs and risks until the equipment arrives at the designated location. The service is classified as a subcontract under a Small Business Set Aside, specifically reserved for small businesses, and falls under NAICS code 484220 for general freight trucking. The solicitation was posted on August 7, 2026, with responses due by August 24, 2026, and the performing agency is the U.S. Department of Agriculture’s Agricultural Research Service. The place of performance is clearly identified as Tifton, GA, with a zip code of 31793, and all logistics must be completed in accordance with federal procurement guidelines applicable to set-aside contracts.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

New Agricultural Tractor Supply (OEM or Authorized Dealer)The contract requires the supply of a brand-new 120 horsepower 6 Series tractor, specifically a John Deere 6125M or an equivalent model, equipped with four-wheel drive and a Category 3 hitch, along with defined tire sizes to ensure operational compatibility and performance standards. Full OEM traceability and compliance documentation must be provided to verify authenticity, warranty status, and adherence to manufacturer specifications. The equipment is intended for agricultural use and must meet all technical and regulatory requirements outlined by the contracting authority. This is a small business set-aside subcontract under NAICS code 333111, restricted to eligible small businesses, with a response deadline of August 24, 2026. The prime recipient is the U.S. Department of Agriculture’s Agricultural Research Service, with performance located in Tifton, Georgia, zip code 31793. The solicitation was posted on August 7, 2026, and the contract is managed through the SAM.gov workspace, indicating formal federal procurement processes are in effect. All deliverables must align with federal contract compliance standards, including documentation, delivery schedules, and equipment certification.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Operator Training and DocumentationThis contract entails comprehensive on-site operator orientation, safety training, and maintenance instruction for all equipment components, ensuring personnel are fully prepared to operate and service the systems effectively. The scope includes the delivery of technical manuals and warranty documents to support ongoing use and compliance. Training will be conducted at the place of performance located in Byron, Georgia, with a zip code of 31008. The solicitation falls under NAICS code 611430, which classifies it as a subcontract for other business support services. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. The contracting agency is the USDAARS AFM APD under the U.S. Department of Agriculture, though no specific point of contact or set-aside details are provided. All activities must be completed in accordance with the specified location and deliverables outlined in the terms.

Professional and Management Development Training

POSTED

DEADLINE

Equipment Integration, Testing, and DeliveryThe contract involves the final assembly, hydraulic and PTO integration, operational testing, and delivery of a complete equipment package to Byron, Georgia, with requirements for on-site setup and verification to ensure full functionality. All work must be completed and validated at the specified delivery location, emphasizing precision in integration and rigorous testing to meet operational standards. The procurement is structured as a subcontract under NAICS code 811310, associated with the USDA ARS AFM APD agency, and targets a specific technical scope requiring specialized expertise in equipment integration and field deployment. Responses to this solicitation are due by August 17, 2026, at 7:00 PM, with the posting date listed as August 7, 2026. The place of performance is strictly limited to Byron, GA, with a zip code of 31008, and no alternative delivery or setup locations are authorized. While no set-aside type or point of contact is provided, the nature of the work implies a need for qualified subcontractors with demonstrated capabilities in agricultural equipment systems, hydraulic integration, and post-installation verification under field conditions. Failure to meet the specified integration and testing criteria may result in rejection or non-compliance.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Flex Wing Rotary Cutter Supply (FC20M)The contract entails the supply of a new FC20M flex wing rotary cutter designed for mowing and vegetation management, with all necessary components including a PTO shaft and safety shields fully integrated to ensure field readiness upon delivery. The equipment is intended for use in agricultural and land management operations and must meet technical and safety standards to support effective and safe operation in diverse terrain conditions. Delivery and installation are to be completed at the specified place of performance in Byron, Georgia, with the equipment required to be fully functional and prepped for immediate field deployment. The solicitation is issued as a subcontract under the USDA ARS AFM APD, with the NAICS code 333111 indicating classification within agricultural, construction, and mining machinery manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. No set-aside designation or agency-specific procurement restrictions are noted, and the contract does not include a designated point of contact. Interested parties must submit proposals through the official SAM.gov portal before the deadline to be considered for award.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Root Rake Grapple Supply (AV57G-84)The contract pertains to the supply of a new AV57G-84 root rake grapple attachment designed specifically for orchard and pecan farm cleanup operations, ensuring compatibility with the 540M loader model. The scope includes all necessary mounting hardware and comprehensive safety instructions to facilitate proper installation and safe usage in agricultural environments. The equipment is intended to improve efficiency in debris removal and tree maintenance tasks common in these farming settings. Performance of this subcontract is required to occur in Byron, Georgia, with the ZIP code 31008 as the designated place of performance. The solicitation falls under NAICS code 332420, classifying it within the Industrial Machinery Manufacturing sector, and is structured as a subcontract with no set-aside designation. The posting date is August 7, 2026, and responses must be submitted no later than August 17, 2026, at 7:00 PM Eastern Time. The contracting entity is the USDA Agricultural Research Service, Agricultural Facilities and Property Division, operating under the U.S. Department of Agriculture. There is no designated point of contact provided, and the full details can be accessed through the SAM.gov workspace link associated with the opportunity.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Front-End Loader Supply (John Deere 540M)The contract entails the supply of a new John Deere 540M front-end loader designed for seamless integration with the 5105ML tractor, ensuring full operational compatibility. The scope includes all necessary hydraulic linkage components, safety guards, and mandatory OEM compliance to meet manufacturer specifications and performance standards. The equipment must be delivered in accordance with original equipment manufacturer requirements to guarantee reliability, safety, and warranty validity. The solicitation is classified as a subcontract under NAICS code 333120 and is managed by the USDA ARS AFM APD, with the place of performance located in Byron, Georgia, ZIP 31008. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. Interested parties must submit proposals prior to the deadline to be considered.

Construction Machinery Manufacturing

POSTED

DEADLINE

Utility Tractor Supply (John Deere 5105ML)The contract entails the supply of a new, low-profile John Deere 5105ML utility tractor that is fully assembled and fully compliant with the original equipment manufacturer’s specifications. The tractor must be delivered in accordance with all required standards and accompanied by the necessary certifications to ensure operational readiness and regulatory compliance. The item is intended for use by the USDA ARS AFM APD, with performance obligated at Byron, Georgia, zip code 31008. The solicitation is classified as a subcontract under NAICS code 333111, which pertains to agricultural machinery and equipment manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. The contract does not specify a set-aside type or an assigned point of contact, and no additional agency details beyond the department name and location are provided.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Supplier – HVAC Unit and Major ComponentsThe contract seeks the supply of a new commercial HVAC unit and its major components, requiring full compliance with Buy American Act standards and applicable energy efficiency regulations. This subcontract is designated as a Small Business Set Aside under the SBA, specifically reserved entirely for small businesses, with the NAICS code 333415 indicating classification under HVAC equipment manufacturing. The opportunity was posted on August 7, 2026, with responses due by September 9, 2026, and the place of performance is designated as Albany with a zip code of 94710. The contracting agency is the USDA Agricultural Research Service, specifically the AFM APD division under the Department of Agriculture. All supplied equipment must meet stringent domestic content and performance benchmarks to fulfill federal procurement requirements, and bidders are expected to demonstrate compliance with both sourcing and efficiency criteria to be considered for award.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Testing, Adjusting, and Balancing (TAB) ServicesThe contract entails comprehensive testing, adjusting, and balancing of the HVAC system following installation to verify optimal airflow, precise temperature control, and operational efficiency. This work is critical to ensuring the system performs as designed, meeting both regulatory standards and occupant comfort requirements. The services are structured as a subcontract under a Small Business Set Aside, specifically reserved for small businesses, with the North American Industry Classification System code 541330 indicating it falls under engineering services. The opportunity was posted on August 7, 2026, with responses due by September 9, 2026, at 9:00 PM. Performance of the work is required at a location in Albany, California, with a ZIP code of 94710. The contracting entity is the U.S. Department of Agriculture’s Agricultural Research Service, specifically the Albany Field Office, though no specific point of contact is listed in the data provided.

Engineering Services

POSTED

DEADLINE

in about 1 month

Sheet Metal Fabrication and DuctworkThe contract is for the fabrication and installation of custom sheet metal ductwork to integrate a new HVAC unit with an existing system, encompassing full scope work including layout design, precise forming of components, airtight sealing, and structural support installation. The work is classified under NAICS code 332312 for sheet metal work and is designated as a Small Business Set Aside, meaning only qualified small businesses are eligible to bid. The opportunity was posted on August 7, 2026, with a response deadline of September 9, 2026, at 9:00 PM. Performance of the contract is required at a location in Albany, California, with a ZIP code of 94710. The contracting entity is the USDA Agricultural Research Service, specifically the AFM APD office, and the procurement is structured as a subcontract under federal guidelines.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 1 month