Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Operator Training Delivery

Active

Federal

Response Deadline08/24/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires the delivery of on-site or remote operator training for USDA personnel focused on the safe and effective use of a new tractor, covering comprehensive safety procedures and operational best practices. The training must be tailored to ensure USDA staff are fully proficient in handling the equipment under various conditions, with an emphasis on minimizing risks and maximizing efficiency. The work is to be performed primarily in Tifton, Georgia, with flexibility for remote delivery as needed, and must comply with federal standards for agricultural equipment training. The contract is classified as a Small Business Set Aside under NAICS code 611430, meaning only small business concerns are eligible to bid, and it is structured as a subcontract. It was posted on August 7, 2026, with responses due by August 24, 2026, and is issued by the U.S. Department of Agriculture’s Agricultural Research Service, specifically under the Auburn Field Manufacturing and Processing Division. The goal is to enhance operational readiness and safety compliance among USDA personnel by equipping them with the necessary skills to operate the new tractor correctly, ensuring long-term equipment reliability and workplace safety.

General Info

On-site or remote tractor training for USDA staff in Tifton, GA, comply with federal standards, small business set aside.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

611430 - Professional and Management Development TrainingView NAICS

Place of Performance

Tifton, GA, 31793, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 10:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide on-site or remote operator training for USDA personnel on the safe and effective use of the new tractor, including safety procedures and operational best practices.

Similar Contracts

Same NAICS industry code

Training for District StaffNorth East ISD is seeking a subcontractor to provide training for district staff on the operation of public address systems, emergency protocols, and basic troubleshooting techniques. The training can be delivered either onsite or virtually, offering flexibility to accommodate the needs of school personnel across the district. The solicitation was posted on August 7, 2026, with responses due by August 27, 2026. This contract falls under NAICS code 611430, which categorizes it as other schools and instruction, indicating a focus on educational support services. The work will be performed within the state of Texas, though specific locations are not outlined. The contract is part of an internal procurement process managed through the district’s online portal, and no set-aside provisions are designated for small business or other categories.

POSTED

about 12 hours ago

DEADLINE

CCC CMD: HAZWOPER Training

Solicitation # 0000039996

The California Conservation Corps is seeking a contractor to deliver on-site, in-person HAZWOPER and First Responder Awareness training to Corpsmembers across 11 locations statewide, with primary focus on Fortuna, Mendocino, Solano, Delta, Monterey, Los Padres, Inland Empire, Norwalk, Pomona, Los Angeles, and Sacramento District Centers. The 40-hour OSHA-compliant HAZWOPER training will be conducted 11 times, with each class comprising a minimum of 25 and a maximum of 30 participants, while the 8-hour First Responder Awareness training will be offered three times at specified centers. Training must be engaging and utilize multiple learning modalities to ensure effective knowledge retention and readiness for emergency response scenarios such as wildfires, earthquakes, and oil spills. The contract has a total estimated value of $200,000, with a hard ceiling on payments, and performance is scheduled from September 1, 2026, through June 30, 2028. Award will be made using the Lowest Price Technically Acceptable method, where the lowest-priced responsive and responsible bidder who meets all mandatory requirements will be selected, with no evaluation of technical approach or past performance beyond compliance checks. All submissions must be delivered via email by August 27, 2026, and must include mandatory attachments such as the Bid Cover Page, Payee Data Record, Contractors Certification Clause, Bidder Declaration, and Proof of Insurance, with failure to include any document resulting in rejection. The contractor is required to comply with a comprehensive set of state-specific contractual terms that go beyond federal standards, including strict insurance mandates requiring primary coverage with an AM Best rating of A- or higher, naming the State as additional insured, and mandatory waiver of subrogation for workers’ compensation. Generative AI use must be disclosed and is subject to State approval or termination without cost impact. The contractor must maintain full control over personnel, who must be direct employees unless approved subcontractors are used, and must prohibit weapons on state property under California Penal Code §171b. Non-discrimination policies under the Fair Employment and Housing Act must be fully upheld, and records must be maintained for potential State audits. Contractor compliance with recycling certification requirements for products and adherence to prompt payment clauses are also enforced. Invoices must be submitted in hard copy format to the Contract Manager in Sacramento, and all deliverables become State property upon creation. Failure to disclose conflicts of interest,

California Conservation Corps

POSTED

about 15 hours ago

DEADLINE

Training & End-User Support

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Training and Staff Development

DMH08 - STATEWIDE

POSTED

about 20 hours ago

DEADLINE

in almost 11 years

O&M Manuals and Training DeliveryThe contract requires the development and delivery of comprehensive Operations & Maintenance manuals in PDF format, detailing system diagrams, equipment lists, and sequences of operation for critical systems. These manuals must be thorough and technically accurate to support long-term facility maintenance and operational efficiency. In addition to the documentation, the contractor is obligated to provide eight hours of on-site or virtual training and a live demonstration of the systems to the owner’s personnel, ensuring they are fully capable of operating and maintaining the equipment independently. This subcontract is issued under NAICS code 611430, indicating it relates to other schools and instruction services, likely encompassing technical training and knowledge transfer associated with complex operational systems. The solicitation was posted on August 7, 2026, with proposals due by September 17, 2026, and is being managed by Tarrant County in Texas. There is no specified set-aside classification, and the place of performance and point of contact details are not provided in the data, meaning the work may be performed remotely or at a location to be determined, with communication to be coordinated through the submission portal linked in the contract posting.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

User Training and Change Management

Jamaica Promotions Corporation

POSTED

about 22 hours ago

DEADLINE

Training Module Development and DeliveryThe contract is for the development and delivery of role-based training modules focused on water management protocols, emergency response procedures, and system operations, specifically tailored for staff within the Department of Veterans Affairs. The work is classified as a subcontract under NAICS code 611430, indicating it pertains to other schools and instruction services, and is being managed by the 255-NETWORK Contract Office 15. The training must be designed to meet the operational needs of VA personnel across various roles and is expected to be delivered at a place of performance in Columbia, Missouri, with a ZIP code of 65201. The solicitation was posted on August 7, 2026, and proposals must be submitted by August 13, 2026, at 3:00 PM Eastern Time. There is no set-aside designation specified, meaning the contract is open to all eligible contractors without preference for small businesses or other categories. While no point of contact is listed, detailed information and submission instructions can be accessed through the provided SAM.gov link. The contractor is expected to ensure all training materials are comprehensive, actionable, and aligned with VA protocols to enhance staff competency in managing critical water-related systems and responding to emergencies effectively.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 23 hours ago

DEADLINE

Technical Documentation and Training Material DevelopmentThe contract seeks the development of comprehensive technical documentation and training materials to support the operation and maintenance of the ENDOR system by researchers at the U.S. Air Force Academy. Deliverables include detailed operation manuals, maintenance guides, and training resources designed to ensure personnel can effectively and safely utilize the system without external support. The work is classified as a subcontract under NAICS code 611430, indicating an educational support services focus, and is tied to a specific performance location at the USAF Academy with a zip code of 80840. The opportunity was posted on August 7, 2026, with a response deadline of August 14, 2026, allowing potential contractors a one-week window to submit proposals. The contracting entity is the Department of Defense under the office FA7000 10 Cons Lgc, and while no set-aside designation is specified, the effort is critical to sustaining the ENDOR system’s functionality within a military research environment.

FA7000 10 Cons Lgc

POSTED

about 23 hours ago

DEADLINE

Operator Training and Technical Knowledge TransferThe contract involves on-site training for government personnel at Aberdeen Proving Ground, Maryland, focused on the operation, maintenance, and programming of a Mill Turning Center. This is a subcontract under the Department of Defense, specifically managed by W6QK Acc-Apg Adelphi, with training activities to be conducted at the specified location. The solicitation is set for a response deadline of August 12, 2026, and is categorized under NAICS code 611430, indicating its alignment with professional and commercial training services. The training aims to transfer critical technical knowledge directly to government staff to ensure proficient and sustained use of the equipment. All activities are to be performed on-site, and there is no indication of remote or off-site alternatives. The contract does not specify a set-aside type or point of contact, and detailed application instructions are accessible via the provided SAM.gov link.

W6QK Acc-Apg Adelphi

POSTED

about 23 hours ago

DEADLINE

Operator Training and DocumentationThis contract entails comprehensive on-site operator orientation, safety training, and maintenance instruction for all equipment components, ensuring personnel are fully prepared to operate and service the systems effectively. The scope includes the delivery of technical manuals and warranty documents to support ongoing use and compliance. Training will be conducted at the place of performance located in Byron, Georgia, with a zip code of 31008. The solicitation falls under NAICS code 611430, which classifies it as a subcontract for other business support services. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. The contracting agency is the USDAARS AFM APD under the U.S. Department of Agriculture, though no specific point of contact or set-aside details are provided. All activities must be completed in accordance with the specified location and deliverables outlined in the terms.

USDA Ars Afm Apd

POSTED

about 23 hours ago

DEADLINE

User Training and Knowledge TransferThe contract is for the development and delivery of comprehensive user training tailored for A/V system operators and administrators at McConnell AFB, with a focus on curriculum design, hands-on instruction, and system familiarization to ensure operational proficiency. Training must be structured to transfer knowledge effectively to end users, covering both foundational and advanced operational aspects of the audiovisual systems in use at the installation. This subcontract, classified as an Economically Disadvantaged Women-Owned Small Business set-aside under NAICS code 611430, requires proposals to be submitted by August 14, 2026, and is issued by the Department of Defense under the FA4621 22 Cons Pk office. Performance will take place at the McConnell AFB location with zip code 67221, and the effort emphasizes practical, job-relevant skills development to support mission-critical communications and media operations.

FA4621 22 Cons Pk

POSTED

about 23 hours ago

DEADLINE

O&M Training and Commissioning SupportThe contract titled O&M Training and Commissioning Support is a subcontract under a Small Business Set Aside designation, aimed at delivering operational and maintenance training to base personnel. The work involves comprehensive system commissioning and safety verification activities following installation to ensure proper functionality and compliance with safety protocols. The training component is critical for enabling personnel to independently manage, maintain, and troubleshoot newly installed systems effectively. Performance of all work is designated to take place in Niagara Falls, New York, with a NAICS code of 611430 indicating the work falls under other schools and instruction services. The contract was posted on August 7, 2026, and responses are due by September 3, 2026, at 7:00 PM. This procurement is managed by the Department of Defense under the FA6670 914 Aw Lgc agency, with no specific point of contact listed publicly.

FA6670 914 Aw Lgc

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

Delivery and Logistics Services (F.O.B. Destination)The contract requires the transportation of a new agricultural tractor from the dealer or original equipment manufacturer to the USDA-ARS Southeast Watershed Research Lab in Tifton, GA, or to a nearby research farm located within ten miles, with delivery terms defined as F.O.B. destination, meaning the seller assumes all costs and risks until the equipment arrives at the designated location. The service is classified as a subcontract under a Small Business Set Aside, specifically reserved for small businesses, and falls under NAICS code 484220 for general freight trucking. The solicitation was posted on August 7, 2026, with responses due by August 24, 2026, and the performing agency is the U.S. Department of Agriculture’s Agricultural Research Service. The place of performance is clearly identified as Tifton, GA, with a zip code of 31793, and all logistics must be completed in accordance with federal procurement guidelines applicable to set-aside contracts.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

New Agricultural Tractor Supply (OEM or Authorized Dealer)The contract requires the supply of a brand-new 120 horsepower 6 Series tractor, specifically a John Deere 6125M or an equivalent model, equipped with four-wheel drive and a Category 3 hitch, along with defined tire sizes to ensure operational compatibility and performance standards. Full OEM traceability and compliance documentation must be provided to verify authenticity, warranty status, and adherence to manufacturer specifications. The equipment is intended for agricultural use and must meet all technical and regulatory requirements outlined by the contracting authority. This is a small business set-aside subcontract under NAICS code 333111, restricted to eligible small businesses, with a response deadline of August 24, 2026. The prime recipient is the U.S. Department of Agriculture’s Agricultural Research Service, with performance located in Tifton, Georgia, zip code 31793. The solicitation was posted on August 7, 2026, and the contract is managed through the SAM.gov workspace, indicating formal federal procurement processes are in effect. All deliverables must align with federal contract compliance standards, including documentation, delivery schedules, and equipment certification.

Farm Machinery and Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Equipment Integration, Testing, and DeliveryThe contract involves the final assembly, hydraulic and PTO integration, operational testing, and delivery of a complete equipment package to Byron, Georgia, with requirements for on-site setup and verification to ensure full functionality. All work must be completed and validated at the specified delivery location, emphasizing precision in integration and rigorous testing to meet operational standards. The procurement is structured as a subcontract under NAICS code 811310, associated with the USDA ARS AFM APD agency, and targets a specific technical scope requiring specialized expertise in equipment integration and field deployment. Responses to this solicitation are due by August 17, 2026, at 7:00 PM, with the posting date listed as August 7, 2026. The place of performance is strictly limited to Byron, GA, with a zip code of 31008, and no alternative delivery or setup locations are authorized. While no set-aside type or point of contact is provided, the nature of the work implies a need for qualified subcontractors with demonstrated capabilities in agricultural equipment systems, hydraulic integration, and post-installation verification under field conditions. Failure to meet the specified integration and testing criteria may result in rejection or non-compliance.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 23 hours ago

DEADLINE

Flex Wing Rotary Cutter Supply (FC20M)The contract entails the supply of a new FC20M flex wing rotary cutter designed for mowing and vegetation management, with all necessary components including a PTO shaft and safety shields fully integrated to ensure field readiness upon delivery. The equipment is intended for use in agricultural and land management operations and must meet technical and safety standards to support effective and safe operation in diverse terrain conditions. Delivery and installation are to be completed at the specified place of performance in Byron, Georgia, with the equipment required to be fully functional and prepped for immediate field deployment. The solicitation is issued as a subcontract under the USDA ARS AFM APD, with the NAICS code 333111 indicating classification within agricultural, construction, and mining machinery manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. No set-aside designation or agency-specific procurement restrictions are noted, and the contract does not include a designated point of contact. Interested parties must submit proposals through the official SAM.gov portal before the deadline to be considered for award.

Farm Machinery and Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Root Rake Grapple Supply (AV57G-84)The contract pertains to the supply of a new AV57G-84 root rake grapple attachment designed specifically for orchard and pecan farm cleanup operations, ensuring compatibility with the 540M loader model. The scope includes all necessary mounting hardware and comprehensive safety instructions to facilitate proper installation and safe usage in agricultural environments. The equipment is intended to improve efficiency in debris removal and tree maintenance tasks common in these farming settings. Performance of this subcontract is required to occur in Byron, Georgia, with the ZIP code 31008 as the designated place of performance. The solicitation falls under NAICS code 332420, classifying it within the Industrial Machinery Manufacturing sector, and is structured as a subcontract with no set-aside designation. The posting date is August 7, 2026, and responses must be submitted no later than August 17, 2026, at 7:00 PM Eastern Time. The contracting entity is the USDA Agricultural Research Service, Agricultural Facilities and Property Division, operating under the U.S. Department of Agriculture. There is no designated point of contact provided, and the full details can be accessed through the SAM.gov workspace link associated with the opportunity.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 23 hours ago

DEADLINE

Front-End Loader Supply (John Deere 540M)The contract entails the supply of a new John Deere 540M front-end loader designed for seamless integration with the 5105ML tractor, ensuring full operational compatibility. The scope includes all necessary hydraulic linkage components, safety guards, and mandatory OEM compliance to meet manufacturer specifications and performance standards. The equipment must be delivered in accordance with original equipment manufacturer requirements to guarantee reliability, safety, and warranty validity. The solicitation is classified as a subcontract under NAICS code 333120 and is managed by the USDA ARS AFM APD, with the place of performance located in Byron, Georgia, ZIP 31008. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM. Interested parties must submit proposals prior to the deadline to be considered.

Construction Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

Utility Tractor Supply (John Deere 5105ML)The contract entails the supply of a new, low-profile John Deere 5105ML utility tractor that is fully assembled and fully compliant with the original equipment manufacturer’s specifications. The tractor must be delivered in accordance with all required standards and accompanied by the necessary certifications to ensure operational readiness and regulatory compliance. The item is intended for use by the USDA ARS AFM APD, with performance obligated at Byron, Georgia, zip code 31008. The solicitation is classified as a subcontract under NAICS code 333111, which pertains to agricultural machinery and equipment manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 17, 2026, at 7:00 PM Eastern Time. The contract does not specify a set-aside type or an assigned point of contact, and no additional agency details beyond the department name and location are provided.

Farm Machinery and Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier – HVAC Unit and Major ComponentsThe contract seeks the supply of a new commercial HVAC unit and its major components, requiring full compliance with Buy American Act standards and applicable energy efficiency regulations. This subcontract is designated as a Small Business Set Aside under the SBA, specifically reserved entirely for small businesses, with the NAICS code 333415 indicating classification under HVAC equipment manufacturing. The opportunity was posted on August 7, 2026, with responses due by September 9, 2026, and the place of performance is designated as Albany with a zip code of 94710. The contracting agency is the USDA Agricultural Research Service, specifically the AFM APD division under the Department of Agriculture. All supplied equipment must meet stringent domestic content and performance benchmarks to fulfill federal procurement requirements, and bidders are expected to demonstrate compliance with both sourcing and efficiency criteria to be considered for award.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

General Construction Support and Site ManagementThe contract seeks qualified small businesses to provide comprehensive construction support and site management services under federal standards, with a focus on superintendent oversight, site cleanup, safety compliance, and coordination of subcontractors. All work must align with USDA ARS AFM APD requirements and be performed at the designated location in Albany, California, with a zip code of 94710. The opportunity is designated as a Small Business Set Aside under NAICS code 238990, meaning only small business concerns eligible under the SBA’s size standards may respond. The solicitation was posted on August 7, 2026, and responses are due by September 9, 2026, at 9:00 PM Eastern Time. Contractors must demonstrate proven experience in managing federal construction sites, ensuring adherence to safety regulations, and maintaining efficient workflow among multiple subcontractors. Failure to meet these standards could result in contract termination or financial penalties.

All Other Specialty Trade Contractors

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Testing, Adjusting, and Balancing (TAB) ServicesThe contract entails comprehensive testing, adjusting, and balancing of the HVAC system following installation to verify optimal airflow, precise temperature control, and operational efficiency. This work is critical to ensuring the system performs as designed, meeting both regulatory standards and occupant comfort requirements. The services are structured as a subcontract under a Small Business Set Aside, specifically reserved for small businesses, with the North American Industry Classification System code 541330 indicating it falls under engineering services. The opportunity was posted on August 7, 2026, with responses due by September 9, 2026, at 9:00 PM. Performance of the work is required at a location in Albany, California, with a ZIP code of 94710. The contracting entity is the U.S. Department of Agriculture’s Agricultural Research Service, specifically the Albany Field Office, though no specific point of contact is listed in the data provided.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Sheet Metal Fabrication and DuctworkThe contract is for the fabrication and installation of custom sheet metal ductwork to integrate a new HVAC unit with an existing system, encompassing full scope work including layout design, precise forming of components, airtight sealing, and structural support installation. The work is classified under NAICS code 332312 for sheet metal work and is designated as a Small Business Set Aside, meaning only qualified small businesses are eligible to bid. The opportunity was posted on August 7, 2026, with a response deadline of September 9, 2026, at 9:00 PM. Performance of the contract is required at a location in Albany, California, with a ZIP code of 94710. The contracting entity is the USDA Agricultural Research Service, specifically the AFM APD office, and the procurement is structured as a subcontract under federal guidelines.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month