Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Generators

Active
W911S226U4332Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation W911S226U4332, issued by the Department of Defense via the W6QM Micc-Ft Drum office, seeks the procurement of both stationary and mobile generators. Both units must be 60kVA (plus or minus 10kVA), 120/208 3-phase, 60Hz, and powered by #2 diesel fuel. The stationary unit requires a fuel tank of approximately 190 gallons with conduit access and must be compatible with Generac GTS Series Transfer Switches, featuring a main breaker, batteries, block heater, and battery charger. The mobile unit must be mounted on a roughly 150-gallon fuel tank, secured to a heavy-duty steel trailer with a 2-inch ball hitch and DOT towing package with electric brakes, and include 100 feet of cables for each phase, neutral, and ground with all connectors installed. This opportunity is designated as a total Small Business Set Aside under NAICS code 335312. The response deadline is September 4, 2026, at 4:00 PM. Interested parties should coordinate with the primary point of contact, Jacqueline Boyle, regarding the requirements for performance at the specified location.

General Info

DoD seeks stationary and mobile 60kVA diesel generators; small business set aside.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

Fort Detrick, MD, NY, 21702

Set-Aside

SBA

Documents

(1)

W911S226U4332 RFQ Combined Synopsis/Solicitation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
Contacts1 person available
OfficeFORT DRUM, NY, 13602-5220, USA
Organization / Agency
Department Of Defense → W6QM Micc-Ft Drum
View Agency Profile
Office AddressFORT DRUM, NY, 13602-5220, USA
Contacts
Jacqueline Boyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GENERATORS - Stationary and Mobile; 1. Stationary - Mounted on less than 190 gal (plus or minus 5 gal) #2 Diesel fuel tank. (Must have hole for conduit access); Runs on #2 Diesel Fuel; 60kVA (plus or minus 10kVA); 120/208 3-phase, 60Hz; Controls compatible with Generac GTS Series Transfer Switch; Equipped with Main Breaker, Batteries, Block Heater, Battery charger 2. Mobile - 60kVA (plus or minus 10kVA); 120/208, 3-phase, 60Hz; Mounted on 150gal (plus or minus10gal) #2 Diesel Fuel Tank; Runs on #2 Diesel Fuel; Prepared for mobile use with temporary connection ports; 100 feet (plus or minus 10 feet) of cables for each phase, neutral, and ground; Cables must come equipped with all coupling/connector ends installed; Integrally secured to a Heavy Duty Steel Trailer with 2 inch Ball hitch; DOT Towing package with Electric Breaks

Similar Contracts

Same NAICS industry code

NAICS: 335312
New
DIBBS
CONTROL, MOTOR-GENER
Solicitation # SPE7M0-26-T-043B
This contract is for the procurement of one motor generator control unit, identified by NSN 6110-01-663-9559 and Woodward Inc. part number 8273-1011. The requirement is issued by the Department of Defense under solicitation SPE7M0-26-T-043B for the Maritime Supply Chain ESOC Buys. Delivery is required within five days after receipt of the order, with a required delivery date of August 17, 2026. The item is to be delivered FOB Origin and will be inspected and accepted at the destination, specifically for the USNS John Lenthall. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It explicitly prohibits the use of Class I ozone-depleting substances in the design, manufacturing, or cleaning processes unless written approval is granted by the contracting officer. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335312
New
DIBBS
ARMATURE, MOTOR
Solicitation # SPE7M1-26-U-5150
Solicitation SPE7M1-26-U-5150 is an Indefinite Delivery Contract issued by the Department of Defense Maritime Supply Chain for the procurement of motor armatures, identified by NSN 6105-00-771-7719. The requirement is for an estimated quantity of 47 units, with a guaranteed minimum of 7 units and a total contract ceiling of 350,000 dollars. This is a total small business set-aside under NAICS code 335312. Delivery is required within 138 days after the delivery order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and ASTM D3951, and prohibits the intentional addition of mercury to hardware. Technical and quality requirements are governed by the DLA Master List. Administrative requirements include mandatory electronic invoicing via Wide Area WorkFlow and compliance with various cybersecurity standards, including NIST SP 800-171 and DFARS 252.204-7012. Proposals must be submitted via the DIBBS portal by August 27, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335312
New
DIBBS
PARTS KIT, ELECTRIC
Solicitation # SPE7M1-26-U-5124
Solicitation SPE7M1-26-U-5124, issued by the DLA Land and Maritime Maritime Supply Chain, seeks the procurement of electric motor parts kits under NSN 6105-00-758-8142. The government estimates an annual requirement of 130 units with a guaranteed minimum quantity of 19 units and a maximum contract value of 350,000.00 dollars. This may result in an Indefinite Delivery Contract for a one-year period, with delivery terms set as FOB Destination within the continental United States. The response deadline for quotations via the DIBBS system is August 27, 2026. The contract requires strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for shipment. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include the use of the WAWF system for electronic invoicing and payment. Technical and quality requirements are governed by the DLA Master List, and any alternate offerors must provide a complete data package for approved and alternate parts.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335312
New
DIBBS
ARMATURE, MOTOR
Solicitation # SPE7M1-26-T-284M
This contract is for the procurement of 16 motor armatures, identified by NSN 6105-00-771-7719, under solicitation SPE7M1-26-T-284M. The requirement is designated as a total small business set-aside for the Department of Defense Maritime Supply Chain. Key part numbers associated with this critical application item include PHT Aerospace LLC 457354 and Aerocontrolex Group 8F15. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and the DLA packaging requirements for procurement. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components. Delivery is set for 168 days after order, with the final destination being the DLA Distribution Depot Hill at Hill AFB, Utah.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335312
New
Federal
MOTOR,ALTERNATING C
Solicitation # N0010426QTB82
This contract pertains to the repair of the MOTOR, ALTERNATING C with part number 87248000-3, issued under solicitation N0010426QTB82 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The Government requires a strict Repair Turnaround Time (RTAT) of 141 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system, to final Government acceptance. All repairs must comply with manufacturer specifications and technical documentation, including adherence to MIL-STD-130 Rev N for marking and strict controls on design or part substitutions governed by coded change procedures. The contract mandates Government Source Inspection and enforces FOB Origin shipping terms, with freight managed by the Navy under the CAV Statement of Work. Pricing is fixed and must include all associated costs for handling, restoring incomplete or damaged assets, and must be submitted alongside the proposed RTAT and comparison to the cost and lead time of purchasing a new unit. The contract is a total small business set-aside, requiring the awardee to comply with Buy American Act provisions and submit certifications under applicable federal programs. It includes an option for increased quantity exercisable within specified FAR timelines, with delivery continuing at the original unit rate unless otherwise agreed. Failure to meet the RTAT triggers a per-unit, per-month price reduction, capped at a specified maximum, without limiting the Government’s right to terminate for default. Records of all inspections and testing must be maintained for 365 days after final delivery. Contractors must prove they are authorized distributors of the original manufacturer and submit required certifications and representations, including those related to small business subcontracting, security exclusions, and annual compliance. All documentation provided by the Government is subject to distribution statements under OPNAVINST 5510.1, restricting unauthorized dissemination. The response deadline is July 29, 2026, and award will require bilateral acceptance after quote submission.
Navsup Weapon Systems Support Mech

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335312
New
Federal
PS CONTROLLER - APS
Solicitation # SPRMM126QHB88
The solicitation for the PS CONTROLLER - APS under contract number SPRMM126QHB88, issued by DLA Mechanicsburg, requires manufacturers or authorized distributors to supply units that comply with stringent military standards, including marking per MIL-STD-130 Rev N with Unique Item Identification and packaging per MIL-STD-2073. All deliveries must be inspected and accepted at source per DLA Procurement Note E06, with inspection and final acceptance locations to be specified by CAGE code, though these fields are currently blank. The contract mandates full compliance with quality assurance requirements, where the contractor is responsible for all inspections and must maintain records for 365 days after final delivery. Offerors must be authorized distributors of the OEM with Cage Code 00724 and part number 8634108-001, and must submit proof of authorization on company letterhead signed by an official. Any design, material, or part number changes require prior written approval from the Contracting Officer under a six-code change system, and changes to production facilities are strictly prohibited unless accompanied by a $250 administrative cost reduction and without altering the FOB point, delivery schedule, or small business performance obligations. Invoicing must be submitted electronically via PIEE-WAWF using the Invoice and Receiving Report (COMBO) format, and contractors are strongly encouraged to register for the EDA portal to monitor order status. The solicitation will be evaluated using the Lowest Price Technically Acceptable method, with award going to the lowest-priced offer that meets all technical and compliance requirements. The contract is fixed-price, governed by security prohibitions and annual representations under Deviation 2026-O0025 and 2026-O0043, and includes a priority rating clause for national defense. All documents and technical data must bear appropriate distribution statements, with NOFORN and classified materials requiring formal requests via DD Form 1425. The solicitation deadline has been extended to July 30, 2026, with a contract expiration date of August 28, 2026, and all contractual documents are considered issued upon electronic transmission or mailing. A detailed pricing structure is not provided, with all financial lines marked TBD, indicating that prices will be determined based on competitive bids.
SPRMM1 DLA Mechanicsburg

POSTED

about 23 hours ago

DEADLINE

in 2 months
View Details
NAICS: 335312
New
Federal
Cape Generators
Solicitation # FA252126QB141
The Department of Defense is seeking sources for the procurement of trailer-mounted, diesel-powered portable generators for Patrick Space Force Base in Florida. The required equipment must range in size from 26 kW to 200 kW and adhere to US EPA Tier 4 Final compliance standards. This sources-sought opportunity, identified by solicitation number FA252126QB141, is open to all vendors as there is no specific set-aside. Interested parties must submit their responses by August 19, 2026, to the primary point of contact, Cynthia Whittaker.
FA2521 45 Cons Pk

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335312
New
Federal
6115--Mobile Diesel Generator
Solicitation # 36C25026Q0918
The Department of Veterans Affairs, through the Network Contract Office 10, is seeking a mobile diesel generator under solicitation number 36C25026Q0918. This presolicitation is categorized under NAICS code 335312 and is managed by the office located in Dayton, Ohio. Interested parties must submit their responses by the deadline of September 8, 2026, at 2:00 PM. The primary point of contact for this requirement is Contracting Officer Luke A. Turner.
250-NETWORK Contract Office 10 (36C250)

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
International
Motor, Alternating Current
Solicitation # W8482-275360/A
The Department of National Defence is seeking proposals for two line items of alternating current motors, part number A/365TD/47 Mawdsley, manufactured by COMPAIR CANADA INC with NCAGE code 36008 and GSIN 6105, for delivery to CFB Halifax and CFB Esquimalt in quantities of six and four units respectively. The solicitation, numbered W8482-275360/A, was posted on July 31, 2026, with responses due by August 13, 2026, and is governed by a Firm Fixed Price contract structure under a Lowest Price Technically Acceptable evaluation methodology, where technical compliance is a mandatory pass/fail requirement and award is determined solely by the lowest evaluated price among compliant offers. Bidders must offer the exact part number or provide a fully documented equivalent or substitute product with corresponding brand, model, and NCAGE information, and all submissions must be submitted through CPC Connect or via fax, with proposals including mandatory annexes such as the Offeror Declaration Form, Submission Details, and Submission Form. Delivery is required under DDP terms, meaning the contractor assumes all transportation, duties, and risks until the items are received at the designated locations, with inspections and acceptance performed by the Government at the destination sites. Packaging and marking must comply with Canadian Forces specification D-LM-008-001/SF-001 for Canadian contractors, or MIL-STD-2073 and MIL-STD-129 for U.S. contractors, while EU-based contractors must meet NATO TL8100-0100 standards, and all items must bear barcodes using UCC/EAN-128 symbology with appropriate application identifiers and human-readable text. Items must be new, fully compliant with technical requirements, and carry at least 75% of their authorized shelf life, with quality assurance requirements aligned to ISO 9001:2015 and supporting documentation provided with each shipment. Invoices must be submitted to the Maritime Forces Atlantic Accounts Payable office in Halifax in a machine-readable format, accompanied by applicable financial codes and certifications, and contractors must maintain complete records for seven years post-payment. The contract includes strict obligations related to conflict of interest, employment equity, international sanctions compliance, and the safeguarding of classified or protected material if applicable, with the contractor liable for subcontractor compliance and subject to government inspection
Department of National Defence

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
SCR DWR, PULSE DBLR — 6110015099791 — N0010426QYADM
Solicitation # N0010426QYADM
NAVSUP Weapon Systems Support Philadelphia is seeking a contractor to provide the labor, materials, and facilities necessary to repair two Pulse Doubler Drawer Screws, identified by NSN 7H-6110-015099791 and part number NV822051-3. The government intends to negotiate a sole-source contract with Hamilton Sundstrand Corp under FAR 6.302-1 because the necessary technical data for the repair is not available to the government. The procurement will be handled as a commercial item under FAR Part 12, utilizing NAICS code 335312 with delivery terms set as FOB Origin. While the government intends to use a single source, other responsible parties may submit capability statements within 15 days of the notice for consideration. Source Approval is mandatory for this contract, and any entity not already approved must submit a request package according to the NAVSUP-WSS Source Approval Information Brochure. The primary point of contact for this presolicitation is Vladimir Maksimchuk, and the response deadline for interested parties is September 28, 2026.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
DIBBS
MOTOR-TACHOMETER GENER
Solicitation # SPE7M1-26-T-316A
This solicitation issued by the Department of Defense Maritime Supply Chain is for the procurement of 47 units of a motor-tachometer generator under NSN 6105-00-463-4909. The contract is designated as a total small business set-aside under NAICS code 335312, with delivery required within 126 days after the order is received. Performance will take place at Robins Air Force Base. The agreement mandates strict adherence to DLA packaging requirements and the protection of covered defense information. It prohibits the use of Class I ozone depleting chemicals and requires the removal of government identification from any non-accepted supplies. Because the item is classified as a commercial product, alternate offerors must provide a complete data package for any proposed substitute parts. Technical and quality requirements are governed by the DLA Master List as specified in the solicitation documents.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
PANEL, CONTROL, ELECTRIC
Solicitation # SPE4A6-26-T-24HH
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of one electrical control panel under National Stock Number 6110-01-696-8782. The contract requires adherence to DLA packaging standards and specific technical and quality requirements as outlined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and requires alternate offerors to provide a complete data package for both approved and alternate parts. The procurement is identified by solicitation number SPE4A6-26-T-24HH and falls under NAICS code 335312. The delivery timeline is set for 371 days after the order is placed, with the place of performance located in Tracy, California. Interested parties must submit their responses by the deadline of September 4, 2026, with Zachary Gonzalez serving as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 336411
New
Federal
Drone
Solicitation # W911S226U4322
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is seeking a combined contract for a Draganfly heavy lift delivery drone with a 35KG capacity. This procurement falls under NAICS code 336411 and is designated as a total set-aside for small businesses. The solicitation, numbered W911S226U4322, was posted on August 27, 2026, with a response deadline of September 4, 2026. Interested parties should contact Ricky Amon for further details regarding the performance of this contract in the 13602 zip code area.
Aircraft Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333415
New
Federal
40 TON PACKAGE CHILLER - FORT BRAGG
Solicitation # W911S226U4330
This contract, identified by solicitation number W911S226U4330, is for the procurement of a 40 ton package chiller for Fort Bragg. Issued by the Department of Defense through the W6QM Micc-Ft Drum office, the opportunity is designated as a total set-aside for small businesses under NAICS code 333415. The solicitation was posted on August 28, 2026, with a response deadline of September 4, 2026, at 4:20 PM. The primary point of contact for this requirement is Deanna Orona. Performance of the contract will take place in the 28308 zip code area.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333112
New
Federal
60in Commercial Grade Seated Zero-Turn Lawnmower
Solicitation # W911S226U4325
The Department of Defense, specifically the W6QM Micc-Ft Drum office, is soliciting bids for a 60in Commercial Grade Seated Zero-Turn Lawnmower under solicitation number W911S226U4325. This opportunity is designated as a total Small Business Set Aside under NAICS code 333112. The solicitation was posted on August 27, 2026, with a response deadline of September 3, 2026, at 1:00 PM. The contracting office is located in Fort Drum, New York, and the primary point of contact for this requirement is Troy Boardman.
Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339930
New
Federal
Robotics Equipment
Solicitation # W911S226U4312
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is seeking robotics equipment under solicitation number W911S226U4312. This combined contract opportunity is designated as a total small business set-aside under NAICS code 339930. Interested parties must submit their responses by September 9, 2026, at 13:00. The primary point of contact for this requirement is Karen Williams, and the designated place of performance is located in the 78217 zip code area.
Doll, Toy, and Game Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
Federal
Joystick
Solicitation # W911S226U4141
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is soliciting a contract for 3 Axis USB Joysticks under solicitation number W911S226U4141. This opportunity is categorized under NAICS code 334511 and is designated as a total set-aside for small businesses. The solicitation was posted on August 18, 2026, with a response deadline of August 25, 2026, at 7:30 PM. The place of performance is located in zip code 73503. Primary coordination for this requirement is handled by Levi Gadson, with Dylan Wright serving as the secondary point of contact.
Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 611430
New
Federal
4BDE JR Air Rifles
Solicitation # W911S226U4328
The 4BDE JR Air Rifles contract, identified by solicitation number W911S226U4328, is issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. This combined type contract falls under NAICS code 611430 and was posted on August 28, 2026, with a response deadline of September 4, 2026. The primary point of contact for this requirement is Violet Roberts. While the contracting office is based in New York, the designated place of performance is located in zip code 40121.
Professional and Management Development Training

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 713940
New
Federal
Fitness Equipment Service and Repair
Solicitation # W911S226QA092
The Department of Defense, through the W6QM Micc-Ft Drum office, is seeking quotes for fitness equipment service and repair under solicitation number W911S226QA092. This opportunity is designated as a total small business set-aside under NAICS code 713940, with the place of performance located in Fort Drum, New York. All quotes must be submitted electronically via the PIEE Solicitation Module by the deadline of September 3, 2026, at 2:00 PM. Interested parties are required to nominate a Proposal Manager within the PIEE system to handle the response and posting of the bid. The primary point of contact for this requirement is Ramon Raymond.
Fitness and Recreational Sports Centers

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 713940
New
Federal
Dry Cold Plunge
Solicitation # W911S226U4333
The Dry Cold Plunge contract, solicitation number W911S226U4333, is a combined type procurement issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. This opportunity is designated as a total Small Business Set Aside under NAICS code 713940. The solicitation was posted on August 28, 2026, with a response deadline of September 4, 2026, at 4:45 PM. The primary point of contact for this requirement is Stephen Mannino, and the place of performance is located in the 28310 zip code area.
Fitness and Recreational Sports Centers

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
Federal
ELECTRICAL SUPPLIES
Solicitation # W911S226U4331
The Department of Defense, through the W6QM Micc-Ft Drum office, is soliciting bids for a combined contract regarding electrical supplies under solicitation number W911S226U4331. This opportunity is designated as a total small business set-aside and falls under NAICS code 335999. The contract is managed by the office located in Fort Drum, New York, with the place of performance situated in zip code 65473. Interested parties must submit their responses by the deadline of September 8, 2026, at 3:00 PM. The primary point of contact for this procurement is Samantha Hooker, who can be reached via email or phone for further inquiries. Detailed information and submission guidelines are available through the official government workspace link.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 811111
New
Federal
Tire Changer
Solicitation # W911S226U4327
The Department of Defense, through the W6QM Micc-Ft Drum office, is soliciting bids for a Tire Changer contract under solicitation number W911S226U4327. This opportunity is designated as a total set-aside for small businesses and falls under NAICS code 811111. The contract is managed by the office located in Fort Drum, New York, with the place of performance situated in the 78015 zip code area. Interested parties must submit their responses by the deadline of September 4, 2026, at 13:45. Primary coordination for this requirement is handled by Clayton Alberson, with Mike Bray serving as the secondary point of contact. The solicitation was officially posted on August 28, 2026.
General Automotive Repair

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339920
New
Federal
Comprehensive Human Performance Suite
Solicitation # W911S226U4314
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, has issued solicitation W911S226U4314 for a Comprehensive Human Performance Suite. This opportunity is designated as a total Small Business Set Aside under NAICS code 339920. The solicitation was posted on August 28, 2026, with a response deadline of September 4, 2026. Interested parties should coordinate with the primary point of contact, Benjamin Smith, regarding the requirements for performance at the Fort Drum location.
Sporting and Athletic Goods Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
Federal
Physical Fitness Platform
Solicitation # W911S226U4318
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is soliciting bids for a Physical Fitness Platform under solicitation number W911S226U4318. This combined contract is a total set-aside for small businesses under NAICS code 321999. Interested parties must submit their responses by September 4, 2026, at 10:20 PM. A critical requirement for this procurement is that the specifications for CLIN 0001 cannot be deviated from, and all measurements must be exact. The primary point of contact for this opportunity is Olivia Brown. Performance of the contract is designated for zip code 22211.
Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details