Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Geotechnical Drilling Field Crew Services

Active

Federal

Response Deadline08/17/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires a field drilling crew to perform geotechnical investigations at four designated borehole locations—BH26-01, BH26-02, P-01, and P-02—focused on bridge subgrade and abutment areas. Services include full mobilization to the site, standard penetration testing at five-foot intervals, core sampling for soil and rock analysis, and complete demobilization upon work completion. All work must be conducted at the place of performance in Ticaboo, Utah, with the ZIP code 84533. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The NAICS code 213112 confirms the scope aligns with drilling support activities for oil and gas, which here applies to geotechnical site investigations. The opportunity was posted on July 27, 2026, with a response deadline of August 17, 2026, at 8:00 PM. The contracting agency is the Central Federal Lands Division of the Department of Transportation, operating under a federal lands infrastructure program.

General Info

Small business must drill and test geotechnical sites in Ticaboo, Utah, under DOT federal lands contract.

Agency

Department Of Transportation → 6982AF Central Federal Lands DivisiView Agency

NAICS

213112 - Support Activities for Oil and Gas OperationsView NAICS

Place of Performance

Ticaboo, UT, 84533, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 08:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 6982AF Central Federal Lands Divisi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Transportation → 6982AF Central Federal Lands Divisi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform field drilling including mobilization, SPT testing every five feet, core sampling, and demobilization at designated boring locations (BH26-01, BH26-02, P-01, P-02) for bridge subgrade and abutment areas.

Similar Contracts

Same NAICS industry code

Drainage System Cleaning and Debris RemovalThe contract titled Drainage System Cleaning and Debris Removal is issued by the Texas Department of Transportation to ensure the proper functioning of roadside drainage infrastructure, including ditches, culverts, catch basins, and storm drain lines. The work requires thorough removal of vegetation, sediment, and other debris to prevent blockages and mitigate the risk of flooding, maintaining the free flow of water throughout the transportation network. This subcontract service is critical to sustaining the integrity and safety of Texas roadways, particularly during periods of heavy rainfall or seasonal runoff. The solicitation was posted on July 27, 2026, with a response deadline of August 25, 2026, at 5:00 p.m. The contract falls under the NAICS code 213112, which classifies it as support activities for mining, suggesting a specialized focus on infrastructure maintenance in alignment with environmental and structural standards. The place of performance spans the state of Texas, indicating this work may involve multiple locations across the transportation system. Interested parties must submit proposals through the Texas SmartBuy portal, and while no set-aside program is specified, the nature of the work implies a need for contractors with expertise in civil infrastructure maintenance and stormwater management.

Texas Department of Transportation

POSTED

DEADLINE

Orphan Well Plugging and Abandonment ServicesThe contract calls for the full plugging and abandonment of 14 orphan oil and gas wells using mechanical bridge plugs, cement retainers, and Class H cement to ensure permanent isolation of hydrocarbon zones and groundwater protection. All operations must be conducted in compliance with industry standards for well integrity, with wireline logging required after each plug placement to verify proper installation and seal effectiveness. The work is scoped as a subcontract under the agency name JCS and is associated with the NAICS code 213112, indicating it falls under support activities for oil and gas operations. The solicitation was posted on July 27, 2026, with a firm response deadline of August 5, 2026, and the place of performance is in Michigan, though specific location details are not provided. The contract is open to eligible subcontractors seeking to perform regulated environmental remediation services for abandoned wells.

POSTED

DEADLINE

Geotechnical Borehole Drilling and Core SamplingThe contract requires the performance of vertical test bore drilling at Monona Terrace to extract soil and rock core samples for geotechnical evaluation, encompassing all phases from mobilization to site restoration. This includes drilling operations, reliable core recovery, detailed logging of subsurface materials, and thorough restoration of the drilling sites to meet regulatory and safety standards. The work is critical for informing engineering design decisions and must be executed with precision to ensure accurate geotechnical data collection. The contract is classified as a subcontract under NAICS code 213112 and is issued by the City of Madison through the State of Wisconsin. It was posted on July 27, 2026, with a response deadline of August 24, 2026, at 2:00 PM. While specific details on the location beyond Monona Terrace and contact information are not provided, the work is expected to be performed on-site, and contractors must comply with all applicable state and local requirements related to drilling, environmental protection, and site reclamation. Bid submissions must be submitted through the designated vendor portal by the stated deadline.

City of Madison

POSTED

DEADLINE

F--JELA Well Plugging - 2026The contract pertains to oil and well plugging activities at Jean Lafitte National Historical Park and Preserve, with a focus on environmental restoration and infrastructure maintenance. Work is scheduled to begin following the issuance of a Not-to-Proceed notice, with the primary period of performance running from September 15, 2026, to March 14, 2027, or within 180 days of full mobilization approval. The scope includes plugging four specific wells—Flemming Plant, Marrero Land Well, and Anne C Herrick Well—alongside the removal of flowlines and junk from the JELA oilfield. All work must adhere to a detailed Statement of Work, comply with federal, state, and local codes including 29 CFR 1910.1200, EPA SNAP and WaterSense standards, and be executed in a workmanlike manner per FAR 52.236-5. Performance is restricted to weekday business hours unless special authorization is granted, and all materials must be new, suitable, and approved by the Contracting Officer. The procurement is conducted as a sealed bid under FAR Part 14 using a Lowest Price Technically Acceptable (LPTA) evaluation method, meaning award is solely based on the lowest responsive and responsible offer with no trade-offs for technical merit or past performance. Offerors must hold a valid Unique Entity Identifier and CAGE code, and submit electronically via email to the designated Contracting Officer by the deadline of August 20, 2026, at noon local time. All submissions must include the Standard Form 1442, Limitation in Subcontracting Worksheet, Davis Bacon Wage Determination, and applicable representations regarding small business status, socioeconomic criteria, and compliance with federal prohibitions on Chinese telecom equipment and ByteDance applications. Subcontracting is capped at 85% for general construction and 75% for special trades, and the contractor must indemnify the government against all liabilities. Safety requirements include MUTCD and OSHA compliance, mandatory submission of Safety Data Sheets, and adherence to stop-work authority provisions. Payment must be submitted electronically through the Treasury’s Invoice Processing Platform, and the Contracting Officer’s Representative will be named post-award to oversee performance while carrying no authority to modify contract terms.

Nps Conops Strategic DOI

POSTED

DEADLINE

Mobile Oilfield Pumping ServicesThe contract titled Mobile Oilfield Pumping Services entails the provision and operation of rig pump units to support well rework activities, specifically for fluid circulation, pressure testing, and wellbore cleanout. The work is intended to ensure safe and efficient well intervention by maintaining proper hydraulic control and removing debris or blockages from the wellbore. Services must be performed by qualified personnel using equipment capable of meeting industry standards for high-pressure operations and environmental compliance. The contract is classified as a subcontract under NAICS code 213112, indicating it falls within oil and gas support activities. It was posted on July 24, 2026, and is administered by the California Department of Conservation, with the place of performance located within the state of California. The work is linked to a project identified through the CEQA Net portal, suggesting it involves environmental review or regulatory compliance. Although no specific location or point of contact is provided, performance will be tied to active well sites in California requiring pumping support as part of rework operations.

California Conservation, Department of

POSTED

DEADLINE

Emergency Tree Removal (Hazardous Western Joshua Trees)The contract authorizes the removal of up to seven dead, detached, or fallen Western Joshua trees that present an imminent threat to public health or safety, specifically those located within 30 feet of structures or leaning against them. The work is classified as emergency remediation and is limited to trees that are clearly hazardous and pose direct risk to inhabited or critical infrastructure. The task must be carried out in Yucca Valley, California, with the zip code 92284 as the designated place of performance, reflecting the localized nature of the threat and the need for prompt action in this arid region where Western Joshua trees are native and protected. This subcontract is issued under the NAICS code 213112, which corresponds to support activities for mining, indicating the specialized nature of the work involving hazardous vegetation near developed areas. The contracting agency is the Fish and Wildlife Headquarters, Habitat Conservation Planning Branch in Sacramento, California, highlighting the environmental oversight and regulatory context surrounding the removal of these protected species. Although the trees are classified as hazardous and subject to removal, the action is strictly bounded by the condition that only those posing an immediate risk may be addressed, ensuring compliance with conservation protocols while prioritizing public safety. The contract was posted on July 24, 2026, and is accessible through a designated public link.

Fish and Wildlife (Headquarters), Habitat Conservation Planning Branch - Sacramento

POSTED

DEADLINE

In-Water Geotechnical BoringsThe contract involves conducting up to eight in-water geotechnical borings from a barge-mounted rig, with drilling depths ranging from 30 to 70 feet below the seabed near Fort Bragg, California. The scope includes the collection of sediment and soil samples for geotechnical analysis and mandates strict adherence to environmental regulations to minimize ecological disturbance during operations. The work is part of a subcontract under NAICS code 213112, which pertains to support activities for oil and gas operations, though the specific application here relates to environmental and infrastructure planning efforts by the U.S. Fish and Wildlife Service, Region 1 – Northern Region, based in Redding and Eureka. All activities must be carried out in compliance with applicable state and federal environmental standards, and the project is scheduled to proceed following its posting on July 24, 2026, with performance centered on coastal waters adjacent to Fort Bragg.

Fish and Wildlife, Region 1 - Northern Region, Redding and Eureka

POSTED

DEADLINE

Onshore Geotechnical BoringsThe contract involves the execution of up to eight onshore geotechnical borings, each between 15 and 35 feet in depth, to collect soil samples for engineering and environmental analysis. The work includes full restoration of the borehole sites through backfilling, capping, and implementation of erosion control measures to ensure site stability and environmental compliance. Operations are scoped to occur in Fort Bragg, California, under the jurisdiction of the Fish and Wildlife Department’s Northern Region, with the North California office overseeing the project. The activity falls under NAICS code 213112, indicating it is categorized as drilling and related support activities for oil and gas, though applied here to geotechnical purposes. The contract is structured as a subcontract and was posted on July 24, 2026, for procurement purposes. All fieldwork must adhere to local regulatory requirements and environmental standards to prevent disruption to surrounding ecosystems.

Fish and Wildlife, Region 1 - Northern Region, Redding and Eureka

POSTED

DEADLINE

Well Cleaning and Debris RemovalThe contract involves cleaning a well to its total depth to remove scale, debris, and any residual completion equipment, ensuring the well is properly prepared for subsequent rework and integrity testing. This work is critical to restoring well functionality and safety ahead of further operations, requiring precise techniques to eliminate obstructions without damaging well structure or surrounding formations. The task is classified as a subcontract under NAICS code 213112, which pertains to oil and gas well drilling and servicing activities. The solicitation was posted on July 24, 2026, under the jurisdiction of the California Department of Conservation, with the place of performance associated with the state of California. While specific location details such as city, state, or zip code are not provided, the work is tied to a project identifier accessible via the California CEQA Net portal. There is no set-aside designation indicated, and no point of contact information is listed, meaning potential contractors must reference the official UI link for further details and submission guidelines.

California Conservation, Department of

POSTED

DEADLINE

Punch and Inject OperationsThe contract requires the execution of controlled punch and inject procedures aimed at restoring flow paths and verifying zonal isolation within the wellbore, with all activities contingent upon approval from the California Geologic Energy Management Division. These operations are critical for ensuring well integrity and environmental compliance in oil and gas production settings. The work must adhere to regulatory standards and be conducted under the oversight of the California Department of Conservation, with performance likely occurring at designated well sites across the state. This subcontract is classified under NAICS code 213112, indicating it pertains to support activities for oil and gas operations. It was posted on July 24, 2026, and is accessible through the CEQA Net portal, though no specific solicitation number or set-aside designation is provided. There is no designated point of contact listed, and the exact location of performance remains unspecified, suggesting the work could be distributed across multiple sites under California jurisdiction. All activities must align with state environmental and operational regulations prior to implementation.

California Conservation, Department of

POSTED

DEADLINE

Fire and Fuel Management ComplianceThe contract requires comprehensive vegetation management and fuel modification zone implementation to ensure compliance with Orange County Fire Authority fire clearance standards prior to the issuance of building permits. Work must focus on reducing hazardous fuel loads and establishing defensible space around proposed development sites, aligning with state and local wildfire prevention regulations. The scope includes vegetation removal, pruning, grading, and other measures necessary to meet OCFA’s specific requirements for fire safety in high-risk areas. This subcontract is categorized under NAICS code 213112, indicating it involves support activities for mining, which in this context refers to land clearing and environmental remediation services tied to construction readiness. The contract was posted on July 24, 2026, and is directly linked to a California-based project under Orange County’s jurisdiction, with performance expected to occur in an unspecified but fire-prone location within the county. All activities must be completed in time to satisfy permit conditions, emphasizing urgency and precision in execution to avoid delays in development timelines.

POSTED

DEADLINE

821410_HWOC_UICHolmes Western Oil Corporation plans to rework existing well USL-17/GOVT 109 in the Midway-Sunset Oil Field by adding new perforations and restoring it to injection service, a process expected to take two days. All activities will be confined within the current facility boundaries without expanding prior use, and the project will not require new infrastructure beyond temporary equipment including a Production Rig, Rig Pump, Wireline Truck, Vacuum Truck, and Bins. Vehicle traffic will be limited to transporting personnel, supplies, materials, and waste to and from the site. The project requires approval from the California Department of Conservation’s Geologic Energy Management Division under permit number 821410_HWOC_UIC, with the well identified by API number 0403069128. The forecasted posting date is July 24, 2026, and primary contact for regulatory matters is Randall P. Jeffries at the Department of Conservation, with Raquel Aguilar of Holmes Western Oil Corporation serving as the company’s engineering contact.

California Conservation, Department of

POSTED

DEADLINE

More opportunities from Department Of Transportation → 6982AF Central Federal Lands Divisi

Same awarding agency

CO ERFO FS SNJUAN 2026-1(1) Fall Creek RoadThe contract pertains to the Fall Creek Road project in Archuleta and Mineral Counties, Colorado, within the San Juan National Forest, approximately 15 miles north of Pagosa Springs. Work includes spot repairs at five damaged sites involving embankment construction, riprap placement, installation of a 70-foot precast concrete box culvert, and repairs to bridge abutment scour protections. Estimated quantities include 4,000 cubic yards of embankment fill, 2,000 cubic yards of riprap, 500 tons of aggregate, and 50 cubic yards of grout. The project is scheduled for award in September 2026, with performance beginning within 10 days after notice to proceed and final completion required by July 30, 2027, including an interim milestone for the West Fork of the San Juan River Bridge site by November 16, 2026. The estimated cost range is between $2 million and $5 million, and the solicitation is a total small business set-aside under NAICS code 237310, with a size standard of $45 million in average annual gross receipts. Bids must be submitted as sealed hard-copy packages by 2:00 p.m. local time on August 13, 2026, to the specified Lakewood, Colorado address, and electronic submissions are not permitted. The contract type is firm fixed price, with award to be made to the lowest responsible and responsive bidder under a lowest price technically acceptable methodology. The government retains final inspection and acceptance authority, with all work subject to compliance with federal standards including Buy American Act requirements, USDA BioPreferred mandates, and EPA SNAP regulations. Key personnel must submit detailed resumes verifying highway construction experience, and a Quality Control Manager must be designated who does not perform manual labor. Invoices must be submitted electronically through iSupplier via login.gov, and no alternative payment methods are allowed without explicit waiver. Offers must include current SAM.gov registration with a valid UEI, and affirmative responses trigger post-award reporting obligations under applicable FAR clauses concerning whistleblower protections, hazardous materials, and veteran employment data. The project site encompasses multiple Colorado counties, with all materials delivered on-site, and no formal FOB terms are specified beyond inclusion of all delivery costs in unit pricing. No packaging, preservation, or marking requirements are detailed. Government property provisions apply under Alternate I of FAR 52.245-1, and

Highway, Street, and Bridge Construction

POSTED

about 14 hours ago

DEADLINE

Equipment and Tool Supplier for Drilling OperationsThe contract is for the supply or rental of specialized drilling equipment including rigs, SPT hammers, core barrels, sampling tools, and essential safety gear, all accompanied by current calibration records, to support field operations in the remote area of Ticaboo, Utah, with a ZIP code of 84533. All equipment must meet operational standards for demanding environmental conditions, and providers must ensure full compliance with calibration and safety protocols to maintain data integrity and personnel protection during drilling activities. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns can respond, and the North American Industry Classification System code 532412 confirms the focus on industrial machinery and equipment rental. The opportunity was posted on July 27, 2026, with proposals due by August 17, 2026, and is managed by the Department of Transportation’s Central Federal Lands Division.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Project Management and Technical Reporting (Scientific Consulting)The contract pertains to the compilation of field and lab data into a comprehensive geotechnical report for bridge foundation design, requiring detailed soil profiles, bearing capacity evaluations, settlement analyses, and specific engineering recommendations. All data must be synthesized into a technically rigorous final report that supports safe and durable foundation construction, with a focus on the site located in Ticaboo, Utah, under the jurisdiction of the Department of Transportation’s Central Federal Lands Division. The deliverables must meet federal standards for scientific consulting and reflect precise analysis grounded in empirical geotechnical data collected onsite and in laboratory conditions. This is a small business set-aside subcontract under NAICS code 541380, categorized as a Total Small Business Set-Aside pursuant to FAR 19.5, meaning only eligible small businesses may respond. The solicitation was posted on July 27, 2026, with a deadline for responses on August 17, 2026. The performance location is fixed in Ticaboo, Utah, with no specified office address beyond the place of performance, indicating that all work related to data collection and report preparation must be conducted in or directly tied to this remote site. While no point of contact is listed, the submission must align with the federal procurement requirements and be submitted through the SAM.gov portal as indicated by the provided UI link.

Testing Laboratories and Services

POSTED

DEADLINE

Geotechnical Laboratory Testing and Sample AnalysisThe contract titled Geotechnical Laboratory Testing and Sample Analysis is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Transportation through its 6982AF Central Federal Lands Division. The work requires comprehensive laboratory analysis of soil and core samples to support bridge foundation design, including determination of moisture content, Atterberg limits, grain size distribution, and Unified Soil Classification System (USCS) classification. All testing must be performed to ensure accurate geotechnical data for infrastructure planning and engineering decisions. Performance is required at Ticaboo, Utah, with a zip code of 84533, and the contract is open for bids until August 17, 2026. Only small businesses are eligible to respond, as this is a total small business set-aside pursuant to FAR 19.5, ensuring opportunities for qualified small firms in the geotechnical testing sector.

Environmental Consulting Services

POSTED

DEADLINE

Engineering Technician – Subsurface Data Logging and Field ReportingThe contract requires certified technicians to perform real-time subsurface data logging during drilling operations, specifically recording soil classification, sample depth, recovery rates, and standard penetration test blow counts for use in engineering analysis. Technicians must be qualified to accurately document field data on-site with precision to support geotechnical evaluations and ensure data integrity for downstream engineering decisions. The work is to be conducted at a designated location in Ticaboo, Utah, with all field activities required to meet accepted industry standards and regulatory requirements. This is a total small business set-aside subcontract under NAICS code 541350, limited exclusively to small businesses as defined by the SBA, and is managed by the U.S. Department of Transportation’s Central Federal Lands Division. The solicitation was posted on July 27, 2026, with responses due by August 17, 2026, emphasizing the need for prompt and qualified submissions. The contracted effort focuses on delivering reliable, field-collected geotechnical data to inform infrastructure planning and safety assessments in the designated region.

Building Inspection Services

POSTED

DEADLINE

UT FLAP GAR BURR(1) - Bullfrog Creek Bridge DrillingThe contract titled UT FLAP GAR BURR(1) - Bullfrog Creek Bridge Drilling is a combined solicitation under the number 6982AF26Q000017, posted on July 27, 2026, with a response deadline of August 17, 2026, at 8:00 PM Eastern Time. It is set aside entirely for small businesses as defined by the Small Business Administration, classified under the NAICS code 541380 for other scientific and technical consulting services. The contracting activity is led by the Central Federal Lands Division within the U.S. Department of Transportation, with the office located in Lakewood, Colorado. The work must be performed at Ticaboo, Utah, with a zip code of 84533, indicating the scope is focused on field operations at this remote location. Primary point of contact for inquiries is Chinh Le, reachable via email at chinh.le@dot.gov or by phone at 720-963-3549. Additional details regarding project specifications, technical requirements, and deliverables are to be obtained from the attached documentation referenced in the contract description.

Testing Laboratories and Services

POSTED

DEADLINE

CO NP BLCA 10(1) South Rim DriveThe U.S. Department of Transportation’s Central Federal Lands Division is seeking expressions of interest from qualified small business prime contractors, including HUBZone, 8(a), women-owned, and service-disabled veteran-owned businesses, for the CO NP BLCA 10(1) South Rim Drive project. This is a sources-sought notice, not a formal solicitation, aimed at determining sufficient interest to justify a small business set-aside. Interested firms must respond by August 7, 2026, via email with a statement of intent to bid, confirmation of applicable socioeconomic certifications, a bonding agent letter verifying capacity for a $2 million single project and aggregate bonding limits, and a detailed list of past projects involving selective boulder removal, site grading, specialized guardrail procurement and installation, and traffic control—specifically referencing work equivalent in scope to this project. The project requires the removal of hazardous boulders and old guardrails along a scenic corridor in Colorado’s National Park Service land, followed by grading, base preparation, and installation of 4,100 linear feet of weathered-look steel guardrail with Natina stain treatments, along with eight terminal systems and fourteen tangent terminals. Work will occur across twelve distinct locations and demands precise traffic control during seasonal operations. The estimated contract value ranges from $700,000 to $2 million, with a critical eight-week lead time for guardrail procurement influencing the schedule: notice to proceed is anticipated in mid-October 2026 so that materials can be ordered and cured over winter, with active construction set to begin in early April 2027 and conclude by late May 2027. All bidders must be registered in SAM.gov and comply with SBA affiliation and size determination rules under 13 CFR 121.103 and 121.108.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Environmental Compliance and Site RestorationThe contract requires strict adherence to NPS standards for equipment cleanliness and comprehensive environmental management in a protected natural area centered around Grand Lake. Responsibilities include the handling and management of drilling fluids and bentonite slurry, responsible backfilling of boreholes, and full restoration of all work sites to their original pre-construction condition, ensuring minimal ecological disruption. This is a small business set-aside subcontract under the NAICS code 562910, designated for total small business participation, with the Department of Transportation’s Central Federal Lands Division as the overseeing agency. The solicitation was posted on July 23, 2026, and responses are due by 8:00 AM on July 31, 2026, with all performance activities focused on the specified location in Grand Lake.

Remediation Services

POSTED

DEADLINE

Sample Packaging, Labeling, and ShippingThe contract requires the packaging, labeling, and transportation of soil and rock samples collected in core boxes, 1-gallon bags, and 5-gallon buckets from Grand Lake to the CFLHD Materials Laboratory in Lakewood, Colorado. The work demands strict adherence to protocols that preserve sample integrity, particularly during transit through mountainous terrain, where environmental and logistical challenges may affect the condition of the materials. All shipments must be properly secured and labeled to ensure accurate identification and handling upon arrival at the laboratory. This is a subcontract classified under the NAICS code 493130 for Other Scenic and Sightseeing Transportation and is set aside exclusively for small businesses as defined by the SBA under FAR 19.5. The opportunity was posted on July 23, 2026, with proposals due by August 31, 2026, at 8:00 AM. The contracting activity is managed by the Central Federal Lands Division of the Department of Transportation. The place of performance is Grand Lake, Colorado, and all work must be conducted in alignment with federal transportation and material handling standards to meet the laboratory’s requirements for sample quality and chain-of-custody compliance.

Farm Product Warehousing and Storage

POSTED

DEADLINE

Traffic Control and Safety ManagementThe contract requires the provision of temporary traffic control services during drilling operations on Trail Ridge Road, encompassing flagging operations, installation and maintenance of signage, and the development of comprehensive Traffic and Safety Plans that fully comply with the Manual on Uniform Traffic Control Devices and coordination with the National Park Service. All activities must be executed with strict adherence to safety standards to ensure the protection of workers, the public, and the surrounding environment during construction-related disruptions. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines with a NAICS code of 561321 for Temporary Help Services, indicating it is reserved exclusively for small business concerns. The solicitation was posted on July 23, 2026, with a response deadline of July 31, 2026, and the place of performance is centered in Grand Lake. The contract is managed by the Central Federal Lands Division within the Department of Transportation, and all work must be performed in alignment with federal regulations and agency-specific requirements for operations in national park areas.

POSTED

DEADLINE

Laboratory Testing of Soil and Rock SamplesThe contract calls for comprehensive laboratory testing of soil and rock samples at the CFLHD Materials Laboratory in Lakewood, CO, including sieve analysis, Atterberg limits, moisture content determination, USCS and AASHTO classification, unconfined compressive strength testing on rock, and corrosivity evaluation. These tests are essential for geotechnical characterization and material suitability assessments, ensuring compliance with engineering and environmental standards for federal land projects. The work is structured as a small business set-aside under SBA guidelines, with the NAICS code 541350 indicating it targets engineering services in the environmental and geotechnical testing sector. The solicitation was posted on July 23, 2026, with a response deadline of July 31, 2026, at 8:00 AM, and the place of performance is specified as Grand Lake, indicating field-related logistics may be involved, though testing must be conducted at the designated Lakewood facility. The contracting organization is the Central Federal Lands Division within the Department of Transportation, underscoring the federal infrastructure context for this work. The type is listed as a subcontract, meaning the selected vendor will provide services to a prime contractor overseeing broader project execution rather than directly to a federal agency. All deliverables must meet precise technical standards to support decision-making on construction materials for transportation infrastructure in federal lands.

Building Inspection Services

POSTED

DEADLINE

Geotechnical Instrumentation InstallationThe contract requires the installation of 550 linear feet of inclinometers, 300 linear feet of piezometers, and one optional thermistor system up to 100 linear feet, all embedded within boreholes to monitor ground movement, groundwater pressure, and permafrost conditions. The work is focused on geotechnical instrumentation deployment in Grand Lake, serving critical infrastructure and environmental surveillance needs, particularly in sensitive permafrost zones. All equipment must be installed to meet technical specifications ensuring long-term data accuracy and reliability for ongoing monitoring programs. This is a total small business set-aside under SBA guidelines with a NAICS code of 238990, indicating it is a subcontract awarded for other construction related services. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026, with the contract to be managed by the Department of Transportation’s 6982AF Central Federal Lands Division. The location of performance is Grand Lake, and the scope demands specialized expertise in borehole instrumentation, environmental data collection, and compliance with geotechnical standards applicable to federal lands.

All Other Specialty Trade Contractors

POSTED

DEADLINE