Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Geotextile Fabric Supply

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Sacramento County has issued a subcontract for the supply of geotextile fabric to be used beneath Class IV rock slope protection in aquatic environments, ensuring compliance with specific project requirements. The fabric must meet technical standards suitable for underwater and hydraulically active conditions, providing erosion control and filtration capabilities essential to the stability and longevity of the installed protection system. The contract is categorized under NAICS code 326199, which pertains to other plastic product manufacturing, indicating the material is likely a synthetic, nonwoven fabric engineered for geotechnical applications. The solicitation was posted on July 16, 2026, and the place of performance is tied to California, though exact location details are not specified. Interested parties should reference the project link provided for detailed specifications and submission guidelines, as adherence to the technical and environmental criteria is mandatory for award consideration.

General Info

Supply of geotextile fabric for underwater rock slope protection in California, meeting technical and environmental standards.

Agency

California → Sacramento County

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Sacramento County

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Sacramento County

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply geotextile fabric meeting project specifications for use beneath Class IV RSP installation in aquatic environments.

Similar Contracts

Same NAICS industry code

SPECTACLES, INDUSTRIThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-3881, specifies the procurement of 5 units of industrial spectacles with NSN 4240-01-701-2897 from Wiley X, Inc. The delivery is required within 20 days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, which is Building 2916 at Fort Stewart, Georgia. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials under FED-STD-313 or ASTM D3951 for non-hazardous items—though DLA requirements supersede ASTM. Palletization must follow RP001 packaging standards, and the Unit of Issue is each (EA). Shipment must be sent by the fastest traceable means, explicitly excluding parcel post, with a referenced RDD code of 555 and project identifier TP 3. The contract includes strict demilitarization guidelines for Category I munitions items, a requirement for removal of government identification from non-accepted supplies, and mandates compliance with all referenced DLA technical documents. The original required delivery date is July 29, 2026, and the point of contact is John Lieb at the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

PLASTIC MOLDING MATThe contract is for the procurement of a plastic molding mat identified by NSN 9330-01-297-8452 and part number THERMOCOMP LF-1006, supplied by LNP Engineering Plastics Inc DBA 0NRS2. The order quantity is one contract unit (CN) equivalent to 25 pounds, with a required delivery within five days of the award date under FOB origin terms. The item must comply with all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The unit container is specified as a 55-pound bag, and palletization must follow DLA packaging requirements. Inspection and acceptance occur at the origin, with no tolerance for quantity variance. The material is subject to Covered Defense Information requirements, and hazardous material shipping protocols apply. Delivery is directed to the 7th Tactical Fighter Wing at Taichung, Taiwan, with the original required delivery date set for May 12, 2025. The solicitation number is SPE8E5-26-T-3695, with a response deadline of August 7, 2026, and the primary point of contact is Khue Nguyen at DLA.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT THE UNIT CONTAINER IS

POSTED

about 22 hours ago

DEADLINE

On-Site Artifact Conservation & Preservation Supplies

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

General Foodservice Smallwares Supply

W6QM Micc-Ft Belvoir

POSTED

DEADLINE

Plastic Stackable Drinking Glasses Supply

W6QM Micc-Ft Belvoir

POSTED

DEADLINE

Synopsis for Outserts (NSN - 4240-01-529-8327 & 4240-01-528-9288)The solicitation SPE8EG-26-R-0003 seeks the procurement of two critical Chemical Biological Radiation and Nuclear (CBRN) Personal Protective Equipment (PPE) components: the Clear Assembly Outsert (NSN 4240-01-529-8327, Part Number 71014/12) and the Laser Assembly Outsert (NSN 4240-01-528-9288, Part Number 71014/11). These items are subject to strict procurement controls due to their essential role in life-saving equipment, and only currently approved parts from the sole authorized source, Avon Protection Systems Incorporated (CAGE 1LEW5), are eligible for award. Offerors proposing alternate parts must submit a complete data package including technical and performance data for both the approved and proposed alternate items. The acquisition is conducted under other than full and open competition per FAR 6.103-1, utilizing a Fixed Price with Economic Price Adjustment (EPA), Indefinite Delivery/Indefinite Quantity (IDIQ) contract structure with a one-year base period and four one-year option periods, totaling a potential five-year performance window. Delivery terms are FOB Origin, with inspection and acceptance occurring at the point of origin, and both the Buy American Act and Berry Amendment clauses are applicable. Price is the sole evaluation factor for award, but compliance with mandatory pass/fail requirements—including active SAM registration, approved US/Canada Joint Certification Program (JCP) status, completion of DOD export-controlled data training and questionnaire, and DLA approval to access controlled technical data—is required for eligibility. The Defense Logistics Agency strictly enforces these export controls under DFARS 252.225-7048, as the technical data is subject to ITAR or EAR restrictions, and no award delay is permitted for offerors or suppliers to obtain these approvals. The solicitation closing date was extended to July 28, 2026, at 3:00 PM EDT, though initial posting occurred on or around June 3, 2026. Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and C3PAO requirements apply to the items but are not required for initial award; they will be enforced during contract performance for continued eligibility. All submissions must be made through the DLA Bid Board System (DIBBS

DLA Troop Support

POSTED

DEADLINE

FPC Yankton - Fargo ShinglesThe Federal Bureau of Prisons, through Federal Prison Camp Yankton in South Dakota, is soliciting commercial roofing supplies for the replacement of the roof on the Fargo Building, with this procurement exclusively reserved for small businesses under a total small business set-aside using NAICS code 326199. The required materials are engineered polymer shakes designed to replicate the appearance of hand-split shakes while offering superior durability, fire resistance, and impact protection, with exact specifications including dimensions of 9” width by 22” length and 5/8” thickness at the butt, a one-piece hip and ridge configuration suitable for roof pitches of 12:12 or less, and an aged cedar finish. Installation must allow for cutting with a utility knife or circular saw and be applied at a 9” or 10” exposure, with sufficient material to cover approximately 6,600 square feet of roofing. Due to the project’s location within the Yankton College Historic District, listed on the National Register of Historic Places, all materials and methods must fully comply with the existing Programmatic Agreement between the Bureau of Prisons, the South Dakota State Historic Preservation Office, and the Advisory Council on Historic Preservation. Vendors must be actively registered in SAM.gov and self-certify as small businesses under the applicable NAICS code, submitting all proposals electronically to Dominick Warmbein at dwarmbein@bop.gov by June 5, 2026, at 11:30 a.m. Central Standard Time, with no acceptance of telephone or fax submissions. Proposals must include company name, UEI number, point of contact, proof of technical and historic compliance, and Small Business status confirmation. Deliveries must be scheduled in advance with the receiving warehouse at 1016 Douglas Avenue, Yankton, SD 57078, occur between 8:00 a.m. and 2:00 p.m. CST, and be completed within 30 days of award; palletization is mandatory and federal holiday deliveries are prohibited. The contract is firm fixed price, and evaluation will focus on price reasonableness, past performance with similar requirements, and delivery capability. All items are subject to close inspection upon delivery, with conditional receipt allowed for three days for testing; nonconforming goods will be rejected, and removal at the vendor’s expense is required within two weeks of notification. The contractor must ensure employee compliance with stringent privacy, cybersecurity, and records

POSTED

DEADLINE

W6QM Micc-Ft Drum

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705 and MIL-STD-2073-1E, specifically to support the shipping of sensitive electronic amplifiers. These packaging solutions must ensure the integrity and protection of electronic components throughout transport and storage under military environmental standards. The solicitation is designated as a total small business set-aside under the SBA program, restricting eligibility exclusively to small businesses as defined by the Small Business Administration guidelines, with the NAICS code 326199 indicating the industry classification for other plastics product manufacturing. The place of performance is clearly identified as Robins Air Force Base with a zip code of 31098-1887, indicating where the packaged materials will be delivered and used. The contract opportunity was posted on July 26, 2026, with a firm response deadline of August 6, 2026, and is categorized as a subcontract under the Department of Defense's Active Devices Division. All proposals must align precisely with the referenced military specifications to ensure compatibility with defense logistics and compliance protocols. The procurement is managed through the DLA DIBBS system, and interested parties must submit responses via the provided online portal before the stated deadline. This opportunity is focused solely on qualified small businesses capable of delivering certified ESD and EMI protective packaging solutions that meet exacting military performance and documentation standards for high-value electronic equipment shipments.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Reclosable Polybag Supply (Medical-Grade)The contract is for the supply of medical-grade reclosable polybags measuring 3x4 inches and 2 mil in thickness, manufactured exclusively from 100% virgin polyethylene to ensure high clarity and consistent quality. Each polybag must feature a white label block for labeling and must be packaged in units of 1,000. The product is required to comply with military packaging and marking standards, ensuring suitability for defense and medical supply chain applications. The items are intended for use in sensitive medical environments where sterility, durability, and traceability are critical. The solicitation is classified as a subcontract under NAICS code 326199 and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. The response deadline is August 3, 2026, with the opportunity posted on July 26, 2026. Performance is specified to occur at a location in Annville, Pennsylvania, with a zip code of 17003-5003. Participation is open to qualified subcontractors capable of meeting the stringent technical and compliance requirements for military-grade medical packaging.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supplier of Raw Materials or Components for Test KitsThe contract requires the supply of medical-grade plastic and rubber components, including test cassettes and pipettes, with strict adherence to full traceability standards and compliance with defined manufacturing timelines. These components are critical to diagnostic test kits and must meet rigorous quality and regulatory requirements to ensure reliability and safety in clinical and field use. The work is scoped under a subcontract classification with the NAICS code 326199, indicating specialized manufacturing of other plastic products, and is tied to performance at Fort Bragg, North Carolina, with a response deadline of August 3, 2026. The procurement is managed by the Department of Defense’s Medical Supply Chain division under the MEDICAL SUPPLY CHAIN MD SURG FSF, signaling its importance to military and federal healthcare operations. All suppliers must demonstrate capability to deliver consistent, high-volume production while maintaining end-to-end documentation and meeting strict quality control protocols.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

High-Performance Foam Core ManufacturingThe contract calls for the manufacture of a lightweight, high-density foam core specifically engineered for military evacuation litter pads, with performance requirements tailored to extreme high-altitude environments. The foam must effectively distribute pressure across the user’s body while resisting shear forces and preventing the formation of decubitus ulcers, ensuring patient safety during prolonged transport under austere conditions. The material must meet stringent mechanical and thermal stability standards to remain functional in low-pressure, low-temperature settings typical of military medevac operations. The solicitation is issued as a subcontract under NAICS code 326199, with a response deadline of August 3, 2026, and place of performance designated at Joint Base Elmendorf-Richardson in Alaska, indicating operational relevance to cold-weather and high-altitude missions. The contracting entity is the Medical Supply Chain FSH under the Department of Defense, reflecting the critical nature of this component within the military’s medical logistics framework. Interested parties must submit proposals by the deadline to compete for this specialized manufacturing opportunity, with technical compliance and proven capability in advanced foam formulation being essential for award consideration.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE