Spirent GSS9000 Simulator

The Air Force Test Center, Installation Operational Contracting Division, Eglin AFB, Florida intends to solicit and award a firm-fixed price contract for a Global Navigation Satellite System (GNSS) Simulator w/ configuration. This is a combined synopsis/solicitation for commercial items prepared under Federal Acquisition Regulation (FAR) Subpart 12.6 and FAR 13.106, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is an unrestricted solicitation. This is Request for Quotation numbered FA2823-19-Q-0002. The North American Industry Classification System (NAICS) code for this acquisition is 334511 with a size standard of 1,250 employees. Please identify your business size in your response based upon this standard. DESCRIPTION OF FIRM FIXED PRICE (FFP) REQUIREMENT: BRAND NAME or EQUAL. Item must be delivered no later than 14 March 2019, but expedited shipment is encouraged. CLIN Description QTY Unit Price Extended Price CLIN 0001 BRAND NAME OR EQUAL Spirent GSS9000 simulator (Product/Spec: TS1995) consisting of a controller, with SimGEN operating software, and RF chassis to include: -Classified package (Product: SimSAAS; Spec: SF1001) including: SF1001-6S-2.xx-AC Software SF1001-12 Fill Port SF1001-12s-1.xx Fill Port Driver Software SF1001-8 Removable Drives - Classified Modernized Navstar Security Algorithm (Product: SimMNSA; Spec: SF2001) upgrade for GSS9000 series simulator, including: SF2001-1S-1.xx-AC Software SFGP2001-5 MNSA FPGA Feature Codes Settings Procedure SF2001-10S-1.xx-SimMNSA FPGA Image - FPGA AOC Security Module (Product SF1001-11; Spec: SF1001), QTY: 24 For classified Y-code testing - AES M-code facility (Product: 2004-0006R; Spec: MS9018) End User Undertaking Required - GSS7765 Interference Simulator including Interference Control Unit (ICU) and one advanced channel for use with GSS9000 series simulator (Product: 7765-0005; Spec MS3055) -Additional channel of Interference (Product: 7765-1003; Spec: MS3055) -2 days operator training at customer facility (Product: Fed-TRG2) FOB-Destination Firm Fixed Price IUID IAW DFARS 252.211-7003 1 each Must meet the following Specifications/Salient Characteristics: 1. The system shall be capable of providing simulated GNSS RF signals via two independently controllable, composite outputs. Each independent RF output shall provide 16 channels of GPS L1 and 16 channels of GPS L2. Each RF output shall allow use of one channel of GPS L1 to support SBAS. 2. The system shall allow the separation of no less than 12 individual satellite signals to individual outputs via software configurable settings. 3. The system shall be field upgradeable to support GPS (L5), SBAS (L5), QZSS (L1, L2, L5), Galileo (E1, E5, E6), GLONASS (L1, L2), BeiDou-2 (B1, B2). 4. The system shall support encrypted SAAS/SAASM modes of operation including P(Y)-code encrypted RF signal generation and software control functionality. 5. The system shall support encrypted AES M-code RF signals and software control functionality. The system shall support use of the Modernized Navstar Security Algorithm (MNSA). 6. The system shall accept externally generated, user-supplied vehicle state vector input in a variety of reference frames and formats to include inertial, ECEF, direction cosines, quaternions, etc. 7. The system shall be capable of supporting an end-to-end 1kHz update rate from vehicle dynamics source (ie 6DOF model, simulator state vector, etc) to RF output. 8. The system shall provide performance with Phase noise less than 0.005 Rad RMS, 0.1dB RF Signal Level resolution over a 60dB range, 0.3mm RMS pseudorange accuracy, resolution of 0.1dB, Linearity of less than .1 dB from 20dB to -30dB. The system shall be capable of simulating dynamics represented in the RF signal output of 120,000 m/s relative velocity, 192,600 m/s2 relative acceleration, 890,400 m/s3 relative jerk. The system shall simulate fixed length multipath delay of 0 to 1245m with 2.4m of resolution. 9. The system shall be capable of simulating RF interference sources including CW, swept CW, stepped CW, pulsed CW, AM and FM waveforms from 0.5 to 2GHz with no greater than +/- 1.0dB RSS of interference accuracy error between an I/S of 63-136dB and +/- 1.6dB RSS of interference accuracy error between an I/S of -1-16dB. 10. The system shall be capable of generating simulated inertial sensor data and supplying it to an inertial measurement unit using SimINERTIAL packages (already owned by the customer). The system shall be compatible with a range of common enhanced GPS/INS systems (including Northrop Grumman and Honeywell) with update rates from 100Hz to 10kHz. All signals shall be coherently generated to exactly match the simulated vehicle trajectory. 11. The system shall directly accept scenarios previously developed for the SimGEN GNSS control platform. The control system will allow manipulation of all satellite orbital data, navigation message data, and SBAS data. 12. The system shall be capable of simulating multipath reflections, terrain obscuration, antenna reception gain patters, differential corrections, trajectory generation for land, air, sea and space vehicles and comprehensive system error modelling. 13. The system shall not require the initiation of a new engineering development effort and will be based on an existing, fielded product. 14. The system shall be transportable in commercially available plastic cases. 15. The vendor will provide system operation training at the customer location. 16. The vendor shall include 1 year standard commercial warranty, to include software and firmware upgrades and telephone support. Quoted firm fixed price should include FOB Destination and annotate the delivery timeframe. Quote must state if FOB-Destination shipping is provided. If FOB-Origin is quoted, the price of shipping must be included in the quote. In accordance with, FAR 52.212-1(b)(4), offerors are reminded that as a minimum, offers must show a technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary. Table A-1. Technical Acceptable/Unacceptable Ratings Rating Description Acceptable Quote clearly meets the minimum requirements of the solicitation. Unacceptable Quote does not clearly meet the minimum requirements of the solicitation. Quoted price should include FOB Destination and remain valid through 10 January 2019. Requested final delivery date is no later than 14 March 2019 (see above schedule), but expedited delivery schedules are accepted, encouraged, and required for portions of each CLIN. Quoted prices must be in US Dollars. Specific Instructions: a. All offerors are required to complete and submit Attachment #1 of this solicitation IAW 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law. BASIS FOR AWARD: In accordance with FAR 13.106-1(a)(2) offerors are notified that the award will be made to the responsible offeror whose quote, conforming to the solicitation, provides the lowest evaluated price for a product meeting or exceeding the acceptability standards set forth in the specifications (Lowest Priced Technically Acceptable Approach LPTA). Offerors will be evaluated in accordance with FAR 13.106-2(b). Offerors must submit quotations for all items listed. Partial offers will not be considered for award. DELIVERY ADDRESS: Eglin AFB, FL 32542 The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-101 effective 26 Oct 2018, DFAR DPN 20180928, and AFFARS AFAC 2018-0525. The North American Industry Classification System code (NAICS) is 334511, with a Small Business Size Standard of 1,250 employees. A firm fixed price contract will be awarded. PROVISIONS/CLAUSES: Provisions and clauses may be obtained via the internet through the following website: http://farsite.hill.af.mil. The following Federal Acquisition Regulation (FAR) provisions and clauses apply to this solicitation and are incorporated by full reference: CLAUSES INCORPORATED BY REFERENCE FAR 52.203-3 Gratuities Apr 1984 FAR 52.203-12 Limitations on Payments to Influence Certain Federal Transactions Oct 2010 FAR 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights Apr 2014 FAR 52.204-4 Printed or Copied Double-sided on Postconsumer Fiber Content Paper May 2011 FAR 52.204-7 System for Award Management Oct 2016 FAR 52.209-7 Information Regarding Responsibility Matters Oct 2018 FAR 52.211-6 Brand Name or Equal Aug 1999 FAR 52.212-1 Instructions to Offerors'Commercial Items Jan 2017 FAR 52.212-4 Contract Terms and Conditions--Commercial Items Jan 2017 FAR 52.232-39 Unenforceability of Unauthorized Obligations Jun 2013 FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors Dec 2013 FAR 52.233-3 Protest After Award Aug 1996 FAR 52.247-34 F.O.B. Destination Nov 1991 The following Defense Federal Acquisition Regulation (DFAR) provisions and clauses apply to this solicitation and are incorporated by reference: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials Sept 2011 DFARS 252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense Contract Related Felonies Dec 2008 DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights Sept 2013 DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials Nov 2011 DFARS 252.204-7003 Control of Government Personnel Work Product Apr 1992 DFARS 252.204-7004 Alternate A, System for Award Management Feb 2014 DFARS 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls Oct 2016 DFARS 252.204-7011 Alternative Line Item Structure Sept 2011 DFARS 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Oct 2016 Reporting DFARS 252.204-7015 Disclosure of Information to Litigation Support Contractors May 2016 DFARS 252.213-7000 Notice to Prospective Suppliers on the Use of Past Performance Jun 2015 Information Retrieval System'Statistical Reporting in Past Performance Evaluations Mar 2018 DFARS 252.215-7008 Only One Offeror Oct 2013 DFARS 252.223-7008 Prohibition of Hexavalent Chromium Jun 2013 DFARS 252.225-7001 Buy American Act and Balance of Payment Program Dec 2016 DFARS 252.225-7002 Qualifying Country Sources as Subcontractors Dec 2016 DFARS 252.225-7012 Preference for Certain Domestic Commodities Dec 2017 DFARS 252.225-7048 Export Controlled Items Jun 2013 DFARS 252.226-7001 Utilization of Indian Organizations, Indian-Owned Sep 2004 Economic Enterprises, and native Hawaiian Small Business Concerns DFARS 252.232-7003 Electronic Submission of Payment Requests Jun 2012 DFARS 252.232-7010 Levies on Contract Payments Dec 2006 DFARS 252.239-7017 Notice of Supply Chain Risk Nov 2013 DFARS 252.239-7018 Supply Chain Risk Oct 2015 DFARS 252.243-7001 Pricing of Contract Modifications Dec 1991 DFARS 252.243-7002 Request for Equitable Adjustment Dec 2012 DFARS 252.244-7000 Subcontract for Commercial Items Jun 2013 DFARS 252.247-7023 Transportation of Supplies by Sea Apr 2014 The following Federal Acquisition Regulation (FAR) provisions and clauses apply to this solicitation and are incorporated by full text: CLAUSES INCORPORATED BY FULL TEXT FAR 52.212-3, OFFEROR REPRESENTATION AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2017) The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision. (a) Definitions. As used in this provision-- - Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. - Forced or indentured child labor means all work or service (6) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (7) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. - Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. - Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. - Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). - Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. - Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. - Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor. - Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). - Service-disabled veteran-owned small business concern (1) Means a small business concern (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). - Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. - Small disadvantaged business concern, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that-- (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-- (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and (2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. - Subsidiary means an entity in which more than 50 percent of the entity is owned (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. - Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term - successor does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances. - Veteran-owned small business concern means a small business concern (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. - Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. - Women-owned small business concern means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. - Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications'Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that (i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: _________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that (i) It [_] is, [_] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: _____________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- (i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [_] is, [_] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 -- (1) Previous contracts and compliance. The offeror represents that -- (i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [_] has, [_] has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that -- (i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American - Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of - domestic end product. The terms - commercially available off-the-shelf (COTS) item, - component, - domestic end product, - end product, - foreign end product, and - United States are defined in the clause of this solicitation entitled - Buy American'Supplies. (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms - Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product, - commercially available off-the-shelf (COTS) item, - component, - domestic end product, - end product, - foreign end product, - Free Trade Agreement country, - Free Trade Agreement country end product, - Israeli end product, and - United States are defined in the clause of this solicitation entitled - Buy American--Free Trade Agreements--Israeli Trade Act. (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled - Buy American'Free Trade Agreements'Israeli Trade Act: Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled - Buy American'Free Trade Agreements'Israeli Trad...