Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Golden Hills School Division - Invitation to Bid - Golden Hills School Division - School Bus Purchase Tender

Active

AB-2026-06792International

Response Deadline11/02/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Golden Hills School Division is seeking tenders for the procurement of up to ten conventional Type C school buses. All submitted bids must ensure that the vehicles meet or exceed D250 standards applicable at the time of manufacture and fully comply with Alberta Transportation requirements for operation within the province. Bidders are required to provide detailed written statements regarding all warranties applicable to the tendered bus units. This solicitation, identified as AB-2026-06792, was posted on October 13, 2026, with a response deadline of November 2, 2026. The place of performance for this contract is Strathmore, Alberta. Interested parties may coordinate with the primary point of contact, Transportation Manager Wayne Funk, regarding this procurement opportunity.

General Info

Golden Hills School Division seeks tenders for ten Type C buses in Strathmore, Alberta.

Agency

Golden Hills School Division

NAICS

336120 - Heavy Duty Truck Manufacturing

Place of Performance

Strathmore, AB, CAN

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSolicitation

PostedOct 13

Solicitation

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 07:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGolden Hills School Division

Contacts1 person available

OfficeN/A

Organization / AgencyGolden Hills School Division

Office AddressN/A

Contacts

Wayne FunkTransportation Manager

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Golden Hills School Division is inviting Bidders to supply tenders for the purchase of up to ten (10) conventional Type C school buses. All buses quoted must meet or exceed the D250 standards.
- Conventional Type C school buses, must meet or exceed the D250 standards in place at time of manufacture, buses must comply with Alberta Transportation requirements to operate in Alberta, written statements detailing all warranties applicable to bus unit(s) tendered are to be included.

Similar Contracts

Same NAICS industry code

ITT - Supply and Delivery of Small Dump Trucks

Solicitation # 26-26-1

The City of St. Catharines is soliciting tenders for the supply and delivery of two new small dump trucks under solicitation number 26-26-1. The vehicles and all replacement parts must be of the latest manufacture and never previously used. Delivery is required at the Lake Street Service Centre in St. Catharines, Ontario, with the specific delivery date to be determined by the awarded respondent's submission. Bids must be submitted electronically in PDF format via the city's bidding portal by November 4, 2026, at 1:00 p.m. ET. The contract will be awarded to the lowest priced compliant respondent following a three-stage evaluation process consisting of mandatory submission requirements, mandatory technical specifications, and pricing. All pricing must be in Canadian funds and provided on an F.O.B. delivered basis. The successful contractor must comply with the Occupational Health and Safety Act and the workplace safety conditions outlined in Schedule 1, and provide proof of liability insurance using the specified standard certificate. In the event of a pricing tie between compliant bidders, the winner will be determined by a coin toss.

City of St. Catharines

POSTED

about 24 hours ago

DEADLINE

Underbridge Inspection Truck

Solicitation # MDT-IFB-2027-2324R

The State of Montana, through the State Procurement Services Division on behalf of the Department of Transportation, is issuing an Invitation for Bid (IFB) under solicitation number MDT-IFB-2027-2324R for the purchase of one underbridge inspection truck. The solicitation was posted on October 14, 2026, with a response deadline of November 3, 2026, at 2:00 PM MST. Submissions must be processed through the eMACS portal and include a completed business information document, detailed manufacturer descriptive literature to establish quality and compliance with specifications, and a bid price for the vehicle. The award will be based on the lowest responsive and responsible bid. Key administrative requirements include registration with the Secretary of State, acceptance of debarment information, and a mandatory certification of nondiscrimination against firearm entities or trade associations in compliance with 30-20-301, MCA. Payment terms are set as Net 30. The primary point of contact for this procurement is Rhonda Peters.

POSTED

DEADLINE

17-Ton Truck-Mounted Crane, Tandem-Axle Chassis

Solicitation # 601440000054549

The Texas Department of Transportation is soliciting bids for the procurement of a hydraulic-powered, telescoping, 17-ton truck-mounted crane on a tandem-axle chassis. The required equipment must feature a minimum load rating of 34,000 pounds at a 5-foot load radius, a minimum boom-tip height of 70 feet, and a turret-mounted hydraulic winch with a minimum bare drum pull of 12,000 pounds. The unit must be delivered complete, assembled, and certified to its rated capacity, meeting ISO-9001 requirements and all applicable Federal and State of Texas safety, health, lighting, and noise regulations. Specific marking requirements include permanent identification of the make, model, and load rating, as well as highly visible electrical hazard warnings. Responses are due by November 6, 2026, at 3:00 p.m. Central Time, and must be submitted through the TxDOT Procurement Website. Bidders are required to provide a comprehensive submission including a price schedule, qualifications, experience, references, and a technical data sheet confirming compliance with specifications. Award will be based on best value, with primary consideration given to purchase price and adherence to specifications. The selected vendor must ship the equipment FOB Destination to Fort Worth, Texas, and provide OEM-qualified operator training. Evaluation includes a pass/fail screening of documentation and vendor performance ratings before a final review of price, risk of non-performance, delivery timeframes, and warranties.

Texas Department of Transportation

POSTED

DEADLINE

Heavy-Duty Tractor Truck SupplierThis subcontract agreement with the Burke County Board of Commissioners in Georgia involves the supply and delivery of one heavy-duty tractor truck intended for use by prime contractors on road department projects. The vehicle must be fully operational and include an operator's manual. Technical specifications require a Cummins X12 engine with 450 hp, an 80,000 lbs gross combined weight, a 12,000-lb front axle, and a 40,000-lb four-spring rear suspension. Additional required features include a self-adjusting clutch, a 13-gallon DEF tank, and 12-foot gladhand lines. The solicitation was posted on October 14, 2026, with a response deadline of December 2, 2026. The contract falls under NAICS code 336120 for heavy-duty truck manufacturing. Interested parties can find further details through the Georgia Department of Administrative Services portal.

Burke County Board of Commissioners

POSTED

DEADLINE

in about 2 months

Solicitation # PE-61700-NONST-2027-000000079

The Burke County Board of Commissioners in Georgia is soliciting sealed bids for the purchase and delivery of one tractor truck for use by the Burke County Road Department. This solicitation, identified as PE-61700-NONST-2027-000000079, requires the vehicle to meet specific minimum technical requirements, including a Cummins X12 engine rated at 450 horsepower, an 80,000 lbs gross combination weight, a 12,000-lb front axle, and a 40,000-lb four-spring rear suspension. The truck must be white or gray and equipped with T1R22.5 tires, a left-side fifth-wheel release, air conditioning, heat, USB ports, an AM/FM radio, and 12-foot gladhand lines with a wet line for trailer hookup. Safety features must include front-mounted strobe and safety lighting as well as safety gauges. Bidders are required to submit their sealed proposals by December 2, 2026, at 12:00 p.m., clearly marked as Tractor Truck. Proposals must explicitly state the offered warranty and the anticipated delivery date. The final deliverable is the tractor truck and its corresponding operator's manual, which must be delivered directly to the Burke County Road Department. Evaluation is based on the bidder's ability to meet these minimum vehicle specifications and provide the required delivery and warranty information.

Burke County Board of Commissioners

POSTED

DEADLINE

in about 2 months

MoDOT Statewide FY27 - Dump Truck 2028 Models - Multiple Award

Solicitation # MODOT 0000000406SL

The Missouri Department of Transportation (MoDOT) is seeking bids for a Multiple Award Blanket Purchase Agreement to procure 2028 model year dump trucks, specifically Single Axle, Tandem Axle, and Towplow configurations. The contract award period begins upon execution and continues through October 31, 2027. Bids must be submitted electronically via MissouriBUYS by October 21, 2026, though hard copies are permitted if the buyer is notified five days prior to closing. Evaluation is based on a point system where base and options costs account for 50 points, followed by unit features, dealer locations, delivery timelines, and past performance. Technical requirements are extensive, featuring detailed district-specific configuration packages and strict specifications for stainless steel dump bodies, electrical systems, and safety components such as three points of contact for ladders and unobstructed operator vision. Deliveries must be coordinated with a MoDOT representative at the receiving district between 8:00 A.M. and 3:00 P.M. on weekdays, with a minimum of 24 hours advance notice. Contractors must comply with the Buy American Act, which offers a ten percent preference for qualifying domestic products, and must certify compliance with anti-discrimination laws and drug-free workplace standards. Final acceptance of each vehicle is contingent upon a thorough inspection by a MoDOT representative to ensure compliance with all published specifications and the absence of shipping damage.

MODOT TRANSPORTATION

POSTED

DEADLINE

Work Zone Safety Trucks

Solicitation # 1449

The State of Idaho is soliciting bids under ITB 1449 for the purchase and delivery of eight Work Zone Safety Trucks to support the Idaho Transportation Department. The procurement includes two F-550 gasoline flatbeds with work baskets and message boards, four F-650 gasoline flatbeds with work baskets and message boards, and two F-650 diesel flatbeds equipped with work baskets, message boards, and hook lift systems. All vehicles must feature a four-camera video recording system with a cab-mounted monitor and OSHA-approved non-skid material on deck surfaces and work basket floors. The successful bidder must deliver the trucks to the ITD Headquarters in Boise, Idaho, within 365 days after receipt of order and provide all necessary labor and equipment for unloading and re-assembly. Award will be granted to the responsive and responsible bidder offering the lowest total extended cost. Bidders must submit their proposals electronically via the IPRO portal, including a completed Submittal Form A for certifications and Submittal Form B for unit pricing. Mandatory requirements for responsiveness include the submission of warranty documentation and an acceptance letter regarding special warranty provisions. The contract term runs from January 1, 2025, to December 31, 2025, with potential renewal options for up to five years. Contractors are required to maintain significant insurance coverages, including Commercial General Liability of $1M per occurrence and $2M aggregate, and Commercial Automobile Liability of $1M, naming the State of Idaho and ITD as additional insureds.

POSTED

DEADLINE

Heavy-Duty Chassis SupplierThis subcontract, managed by DAS Procurement for the state of Connecticut, seeks a supplier to provide a new heavy-duty truck chassis to support prime contractors working on Regional Refuse Disposal District 1 waste operations projects. The required vehicle must feature a six-cylinder diesel engine with at least 525 HP, an engine brake, a 1,500-watt engine block heater, a 20,000-lb capacity front axle, and a factory-installed steerable 20,000-lb lift axle. Additional specifications include a 75-gallon left-mounted fuel tank and an air-suspension driver's seat. The procurement process is categorized under NAICS code 336120, with the solicitation posted on October 13, 2026. Interested parties must submit their responses by the deadline of October 23, 2026. The selected supplier will be responsible for the delivery of the completed truck chassis as specified.

DAS Procurement

POSTED

DEADLINE

Invitation to submit Bid for a new Roll-off Truck

Solicitation # 39390

Regional Refuse Disposal District #1, serving the towns of Barkhamsted, New Hartford, and Winchester, is soliciting bids for the purchase and delivery of one new roll-off truck. The vehicle will be used to transport municipal solid waste, bulky waste, and recyclables within a 50-mile radius of Barkhamsted, Connecticut. A 2026 model-year truck is preferred, and the vehicle must be capable of hauling containers up to 50 cubic yards with an overall length not exceeding 37.5 feet from the front bumper to the end of the hoist. Technical requirements include a mandatory 24-foot hoist and a minimum 75-gallon left-mounted fuel tank. Proposals will be evaluated based on responsiveness to specifications, equipment suitability, delivery schedule, warranty coverage, service support, and overall value. Bidders must provide a firm total price with an itemized breakdown including the chassis, hoist, tarp system, box grabbers, delivery, and setup. Optional financing and extended warranty proposals may also be submitted. Proposals must be received by October 23, 2026, at 2:00 p.m. and delivered to the District office in Barkhamsted, Connecticut. The primary point of contact for this solicitation is Administrator Todd Arcelaschi.

DAS Procurement

POSTED

DEADLINE

SEF2492 Prisoner Transport Bus

Solicitation # 225510

The State of Alaska Department of Transportation and Public Facilities, HQ State Equipment Fleet, is soliciting bids for the one-time purchase of one Prisoner Transport Bus under solicitation number 225510. The vehicle must be winterized for temperatures as low as minus 50 degrees Fahrenheit, feature a dark blue baked-on polyurethane paint finish, and comply with Federal Motor Vehicle Safety Standards and SAE test procedure J2233 for heating. Key specifications include a driver compartment, guard stations with 180-degree rotating seats, a surveillance station with two 7-inch color monitors and night-vision cameras, and storage capacity for approximately 40 inmate boxes. Required safety equipment includes a 5 B:C minimum fire extinguisher, emergency reflective triangles, and a standard school bus first aid kit. Bids must be submitted in PDF format or via sealed envelope by November 4, 2026, at 2:30 PM, with requests for amendments due by October 28, 2026. Offerors must provide unit pricing and extensions, and they must hold a current Alaska business license. Preference may be awarded to qualified employment programs or individuals with disabilities. The contract requires the contractor to be solely responsible for all equipment, training, and warranty services, and mandates that all price decreases, such as fleet rebates, be passed to the state. Delivery is required within a maximum of 240 days after receipt of order to a final destination within Alaska, with pricing based on dockside Seattle/Tacoma. Payment for agreements under $500,000 will be made within 30 days of receipt of proper billing or delivery.

Transportation and Public Facilities

POSTED

DEADLINE

58k Tandem Axle Extended Cab Chassis SupplyThis subcontract involves the supply of a new 58k GVWR tandem axle extended cab chassis designed for prime contractors providing utility vehicles to the Nashville Electric Service. The chassis must be specifically configured for crew transport and heavy-load stability, ensuring full frame compatibility with NES SPEC #27-FLT148. The scope of work includes the delivery of the completed chassis directly to the designated agency or upfitter. The project is based in Nashville, Tennessee, and falls under NAICS code 336120. Interested parties must adhere to the timeline established by the posting date of October 13, 2026, with a final response deadline of November 4, 2026.

Nashville Electric Service

POSTED

DEADLINE

56k Tandem Axle Extended Cab Chassis SupplyThis subcontract involves the manufacture and supply of a new 56k GVWR tandem axle chassis featuring an extended cab for prime contractors working on Nashville Electric Service utility vehicle projects. The chassis must be specifically configured to support a heavy material handler aerial device in strict accordance with NES SPEC #27-FLT147. The scope of work includes the production and delivery of the completed chassis to either the designated upfitter or the agency in Nashville. Interested parties should note the response deadline of November 4, 2026, for this procurement effort categorized under NAICS code 336120.

Nashville Electric Service

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS