Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE4A6-26-T-11SDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 269 plain rod end bearings, identified by NSN 0001S00000052, classified as a commercial item including commercial of a type. The item is subject to a range of technical, quality, and export control requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards, inspection at origin, removal of government identification from non-accepted supplies, and compliance with measuring and test equipment standards. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons or entities, even within the United States, with DFARS 252.225-7048 governing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Delivery is scheduled 471 days after award, with performance to occur at Robins AFB, Georgia. The solicitation, issued under number SPE4A6-26-T-11SD, is open for response until August 12, 2026, with the contract type designated as Government First Artic and NAICS code 336413, under the jurisdiction of the Department of Defense’s ASC Commodities Division.

General Info

269 plain rod end bearings procured for Robins AFB, subject to ITAR/EAR, with 471-day delivery and strict export controls.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11SD.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Chanee Yarborough
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,PLAIN,ROD END
BEARING,PLAIN,ROD-END
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 269 EA Purchase Request: 7017740339QTY - See Solicitation Delivery: 471 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-T-611G
The contract pertains to the procurement of a Hydraulic Motor-Pump, identified by part number 4110820-1 from Triumph Actuation Systems LLC, with a corresponding NSN of 1650012936045, and includes a separate first article test requirement under NSN 0001S00000053. The item is designated as a Critical Application Item and must fully comply with stringent technical and quality standards referenced from the DLA Master List, including requirements for configuration change management, inspection and acceptance at origin, and physical identification per MIL-STD-130 for Item Unique Identification. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively, with specific packaging codes and methods outlined under DLA packaging directives. The contract mandates zero tolerance for quantity variance and requires delivery FOB origin, with inspection and acceptance also occurring at the origin. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical attributes assigned a verification level of VII and an AQL of 0.1. A separate line item exists for the First Article Test, requiring one unit to be submitted for testing, with no separate charge implied if not priced explicitly. Delivery must be completed within 613 days of contract award, with a required ship date set for September 29, 2025, to the designated DLA Distribution facility in New Cumberland, Pennsylvania. All terms are governed under the referenced DLA procurement directives and federal acquisition regulations, including clauses related to first article testing and contractor compliance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILLER, COUNTERSINK
Solicitation # SPE4A7-26-T-608S
The item specified is a FILLER, COUNTERSINK with NSN 1560-00-463-1728, with a quantity of 42 units required under purchase request 7017741479. The delivery must be completed within 171 days after order award. This procurement is governed by strict export control regulations under ITAR or EAR, meaning any technical data associated with the item is controlled and cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior written authorization from the Department of State or Department of Commerce. The Defense Logistics Agency restricts access to this controlled technical data exclusively to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled data and have received formal approval from DLA. DFARS 252.225-7048 applies to all data handling and dissemination requirements. The solicitation number is SPE4A7-26-T-608S, posted on August 4, 2026, with responses due by August 12, 2026, and the contract falls under NAICS code 336413. Performance is scheduled for New Cumberland, Pennsylvania, 17070-5002, with Jessica Gentry of the Department of Defense, ASC Supplier Oper AE and AF Division, listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIRCR
Solicitation # SPE4A7-26-T-611D
The contract pertains to the procurement of six structural aircraft plates, specifically identified as a seal assembly for fixed leading edge slats, with NSN 1560-01-281-6333 and purchase request number 7017739703. The item is subject to strict export control under either ITAR or EAR, meaning any transfer, including mere disclosure of technical data to foreign persons regardless of location, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to receive it. The solicitation, numbered SPE4A7-26-T-611D, was posted on August 4, 2026, with a response deadline of August 12, 2026, and is designated as a total small business set-aside under NAICS code 336413. Performance is required at Robins Air Force Base, Georgia, with a delivery window of 171 days after order. The contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Mahlon Marcus as the primary point of contact. The procurement is managed under federal acquisition protocols and is accessible through the DIBBS system, with strict compliance required for handling sensitive technical data tied to national security.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-611H
The contract pertains to the procurement of 23 units of a support structural component for aircraft, identified by NSN 1560-01-434-9026, with specific packaging requirements mandated by Qinetiq under cage code 5B2G7 for Aircraft Mats and Panels 1210300059. The purchase request number is 7017740258, and the delivery timeline is set at 171 days after contract award. The solicitation, identified as SPE4A7-26-T-611H, was posted on August 4, 2026, with responses due by August 12, 2026, under a federal procurement type and NAICS code 336413. The acquiring agency is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance located in New Cumberland, Pennsylvania, ZIP 17070-5002. Primary point of contact is Shante'l Wyche, reachable at 804-279-4312, and all details are accessible via the DIBBS website under the specified solicitation link.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SLIDE, ESCAPE, AIRCRAFT
Solicitation # SPE8E6-26-Q-0610
The contract pertains to the procurement of seven units of a critical safety item, specifically an aircraft escape slide designated by NSN 4240-01-075-6640 and part number 16D22231-103, supplied by Air Cruisers Company, LLC. The item is classified as a Commercial Off the Shelf (COTS) product and is subject to stringent quality and packaging requirements mandated by the Defense Logistics Agency. All supplies must conform to MIL-STD-129 for marking, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with no use of plastics for wrapping, cushioning, or dunnage whenever permissible. Packaging must comply with MIL-STD-2073-1E and RP001 DLA Packaging Requirements, ensuring full physical and mechanical protection during transport and storage. The product is designated as a Critical Safety Item by the Air Force, requiring strict adherence to technical and quality standards referenced from the DLA Master List, including compliance with SAE AS9100 and DLA Directive Procurement Note C03 for supply chain traceability documentation retention. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331, employing zero-defect acceptance criteria unless otherwise specified. The contractor must provide FAA airworthiness approval documentation and fulfill all documentation requirements for source approval requests. Delivery is due within 90 days after award, with FOB Origin terms and no variance allowed in quantity. Hazardous materials handling must follow DLAD Procurement Note C19, and shipment must be directed to the designated DLA Distribution Depot in Tinker AFB, Oklahoma. The contract mandates full compliance with Federal Aviation Administration airworthiness standards, retention of technical data per the Technical Data Package Revision A, and control of covered defense information under RD003. All waivers or deviations must be submitted to the DSC Contracting Officer for approval, with noncompliance potentially affecting contract acceptance.
DEPOT OKLAHOMA

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
ROLLER ARM, CONTROL
Solicitation # SPE4A7-26-T-610T
This contract is for the procurement of 26 Roller Arms, Control, identified by part number 6PA30 and NSN 1680-01-192-6832, supplied by Honeywell Sensing and Control with CAGE code 91929. The items are classified as a critical application item and must comply with stringent quality and security requirements, including CMMC Level 2 Cybersecurity Self-Assessment and tailored higher-level contract quality standards applicable to both manufacturers and non-manufacturers. All supplies must meet DLA packaging requirements, adhere to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, and be delivered FOB origin with zero variance in quantity. Inspection and acceptance occur at the destination, and any non-accepted items must have government identification removed. The contract mandates strict configuration change management through engineering change proposals and variance requests. Delivery is due within 171 days of the contract award, with an original required delivery date of May 1, 2027, and a need ship date of January 31, 2027. Pricing is set at $26.00 per unit for a total contract value of $676.00. Transportation and shipping instructions are governed by DLA procedural notices, and the delivery address is DLA Distribution Jacksonville, Florida. The solicitation number is SPE4A7-26-T-610T, issued by the Department of Defense under NAICS code 336413, with responses due by August 12, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRY FIRE MAGAZINE, P
Solicitation # SPE2DS-26-T-306A
The dry fire magazine is a non-functional training aid designed exclusively for resetting the trigger assembly of a 9mm pistol during marksmanship drills. It has precise dimensional requirements: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches. It is incapable of holding any ammunition and serves solely as a mechanical training device to simulate magazine insertion and trigger manipulation without live rounds. The unit of issue is each, and the item is identified by NSN 6910-01-708-4254 with a procurement quantity of 20 units. This acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date. Removal of government identification from non-accepted supplies is mandated under RQ011. The contract solicitation, numbered SPE2DS-26-T-306A, was posted on August 4, 2026, with responses due by August 10, 2026. The procurement falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Delivery is required within 20 days of award, and performance is specified to occur at FPO, ZIP 96673. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
STRAP, WEBBING
Solicitation # SPE4A7-26-T-613B
The contract pertains to the procurement of STRAP, WEBBING with part number 051497-141 and NSN 1680-01-646-6238, for a quantity of 15 units at a unit price of $15.00, totaling $225.00. Delivery is required FOB origin with a lead time of 171 days, and the item must be delivered by January 31, 2027, with an original required delivery date of June 10, 2027. Inspection and acceptance occur at origin, and the supplier must comply with all DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample unless otherwise stipulated. The product must be marked and labeled per MIL-STD-129 and packaged per ASTM D3951, with palletization conforming to DLA packaging requirements. All government identification must be removed from non-accepted items. The unit of issue is each, and packaging quantity per unit pack is specified in the contract. The delivery destination is the DLA San Joaquin facility in Tracy, CA, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A7-26-T-613B, released on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 336413 and managed by the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CABLE ASSEMBLY, ML-L
Solicitation # SPE4A1-26-T-2515
The contract pertains to the production and delivery of six cable assemblies, designated by NSN 1680-01-616-7745, under solicitation SPE4A1-26-T-2515, which is a total small business set-aside governed by FAR 19.5 and classified under NAICS code 336413. The delivery is scheduled within 341 days after order, with performance centered at New Cumberland, Pennsylvania, 17070-5002. The contractor is required to conduct a Production Lot Test and submit a detailed test report labeled with the contract and lot numbers, which must be presented to the Quality Assurance Representative for review. Accompanying each shipment of test reports must be signed DD Form 1222 and DD Form 250 or iRAPT receiving documents, a copy of the purchase order, all applicable test reports showing actual results alongside specified tolerances, material and process certifications, inspection and operation method sheets, and drawings used in manufacturing the test sample, appropriately marked to control public disclosure and limit government use as necessary. The primary point of contact for this solicitation is Allison Hugel, reachable via email and phone provided, with responses due by August 12, 2026.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SPHER
Solicitation # SPE4A6-26-T-12LE
This contract specifies the procurement of 14 spherical plain bearings under NSN 3120-01-576-6374 and part number 5136L017-1 from Circor Aerospace, Inc. DBA 50601, with delivery required within 264 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure, as outlined in referenced tables and paragraphs. Protective lubricants and preservation controls are dictated by bearing specifications, and the contractor’s packaging facility must meet quality assurance verification criteria. Unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Item Unique Identification is not required per customer request, and all marking must follow specified standards without special codes. The solicitation number is SPE4A6-26-T-12LE, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 12, 2026, and performance location at Hill AFB, Utah.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details