Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GOVERNMENT FIRST ARTIC

Active
SPE7M8-26-Q-0211Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 99 units of a SWITCH, LIQUID LEVEL item identified by NSN 0001S00000052 under Solicitation SPE7M8-26-Q-0211, with a delivery requirement of 545 days after award. The procurement is governed by stringent cybersecurity and quality standards, including mandatory CMMC Level 2 certification for the performing organization, compliance with DLA packaging requirements, and adherence to tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Configuration changes must be managed through formal engineering change proposals and variance requests, and all technical data associated with the item is subject to strict export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, including foreign nationals within the U.S. Access to this controlled data is restricted to DLA contractors holding approved JCP certification, having completed required training on export-controlled data handling, and receiving formal DLA approval. The item is covered under DFARS 252.225-7048, and distribution is limited to contractors meeting these export control conditions. The contract is issued by the Department of Defense’s Electrical Devices Division, with performance to occur at Hill AFB, Utah, and responses are due by August 18, 2026. All technical and quality requirements referenced are derived from the DLA Master List, with the version in effect at the solicitation issue date controlling.

General Info

Procure 99 liquid level switches under strict cybersecurity, export control, and quality requirements with CMMC Level 2 and ITAR/EAR compliance.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M8-26-Q-0211

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ELECTRICAL DEVICES DIV
View Agency Profile
Office AddressUS
Contacts
Brian Maxwell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH, LIQUID LEVEL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000052 Quantity: 99 EA Purchase Request: 7016286166QTY - See Solicitation Delivery: 545 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-T-168P
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 44 units of the electromagnetic relay with NSN 5945011719064, to be delivered to the DLA Distribution Depot in Oklahoma within 276 days after contract award. The approved source for this item is 59501 117740, and all responsible suppliers may submit a quote provided it is done electronically and received before the deadline. The solicitation, identified by number SPE7M126T168P, was posted on June 24, 2026, and responses are due by July 6, 2026. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided. The procurement is classified as a combined action with no set-aside restrictions, and the NAICS code is 335314 for electromechanical manufacturing. All inquiries must be directed via email to the point of contact listed, with further details accessible through the SAM.gov portal using the provided link. The contracting office is located in Columbus, Ohio, and performance is mandated at the specified DLA location.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-369A
The contract specifies the procurement of five electromagnetic relays with NSN 5945-00-883-6915 under solicitation SPE7M5-26-T-369A, issued by the Department of Defense’s Active Devices Division. Delivery is required within 154 days of award, and responses must be submitted by August 17, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling for this simplified acquisition. The item is subject to export control under ITAR or EAR, restricting disclosure or transfer of associated technical data to foreign persons or entities without prior authorization from the Department of State or Commerce, including U.S. subsidiaries and foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Documentation for source approval and removal of government identification from non-accepted supplies must comply with applicable DLA directives, and the place of performance is designated as New Cumberland, Pennsylvania, with Jeanette Heisey listed as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, HYBRID
Solicitation # SPE7M5-26-T-368F
This contract is for the procurement of four hybrid relays with NSN 5945-01-393-7927 under solicitation SPE7M5-26-T-368F, with a firm delivery requirement of 20 days and delivery terms FOB destination. The item is classified as a commercial off-the-shelf product and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, as referenced and governed by the revision in effect on the solicitation issue date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific approved applications like batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents specified by NAVSEA; any portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and container codes, and all units must be marked in accordance with MIL-STD-129 and include the additional IPC/JEDEC J-STD-609 lead finish marking on each individual unit package to indicate lead content, with placement as specified in the standard. The shipment must be delivered to the USS JOHN P MURTHA LPD 26 at FPO AP 96694, using the fastest traceable means—not parcel post—as directed by DLA procedures, with RDD 777 and projected delivery by August 3, 2026. The contract includes a zero variance tolerance in quantity and requires full compliance with DLA’s unit of issue and commercial labeling standards.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, PROXIMITY
Solicitation # SPE7LX-26-U-9287
The contract covers the procurement of three proximity switches, identified by NSN 5930-00-041-5140, under an indefinite-delivery contract mechanism issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. The item is manufactured via a metal casting process requiring specialized tooling, and delivery is scheduled 350 days after the order date with FOB Origin terms, meaning title and risk transfer occur at the contractor’s facility. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling and barcoding, including the use of OPI:O and IP056 to prohibit mercury or mercury-containing compounds in all packaging materials. Preservation must follow PRES MTHD:41 and CLNG/DRY:1 standards, and all markings must adhere to DLA’s RP001 packaging guidelines. Export control is a critical component, as technical data associated with the item is subject to ITAR or EAR, requiring prior government authorization for any disclosure to foreign persons, including subsidiaries or foreign nationals, with compliance governed by DFARS 252.225-7048; only contractors with JCP certification, completed DLA training, and approved access may handle such data. The contract includes numerous FAR and DFARS clauses addressing labor, cybersecurity, hazardous materials, and procurement integrity, including mandatory compliance with 52.227-1 Alt II for government authorization rights, 52.240-93 and 252.204-7012 for safeguarding covered defense information and cyber incident reporting, and 252.204-7018 prohibiting acquisition of covered telecommunications equipment. Packaging and delivery are tightly controlled with zero variance on quantity, destination inspection and acceptance mandated, and invoicing processed exclusively through WAWF. The solicitation does not specify the contract type beyond the IDC structure, nor does it list prices or evaluate offerors by a defined basis such as LPTA or trade-off. Offerors must complete required representations via SAM.gov, including UEI and CAGE codes, size status, and disclosures related to covered defense equipment. Technical data submissions must occur through the designated DLA portal, and responses are due by August 20, 2026 via DIBBS. The estimated contract value ranges from approximately $10,347 to a maximum of $3
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-368Y
The contract pertains to the procurement of seven electromagnetic relays with NSN 5945-00-549-9672, issued under solicitation SPE7M5-26-T-368Y by the Department of Defense’s Active Devices Division. Delivery is required within 91 days after contract award, and responses must be submitted by August 17, 2026. The technical specifications and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions and the RFP issue date for large acquisitions unless amended. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons or entities, including foreign nationals within the United States. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved JCP certification, completion of DOD export control training, and DLA authorization may access the controlled data. The place of performance is Tinker AFB, Oklahoma, with Brittany Luster listed as the primary point of contact for inquiries.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
POWER XFR RELAY AY
Solicitation # SPE7M5-26-T-369L
The contract pertains to the procurement of POWER XFR RELAY AY, identified by NSN 5945-01-598-1211, with a quantity of two units to be delivered within 154 days after order. The solicitation number is SPE7M5-26-T-369L, issued by the Defense Logistics Agency’s Active Devices Division under the Department of Defense, with a response deadline of August 17, 2026. The NAICS code 335314 indicates classification within the manufacture of other electrical equipment and components. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved JCP certification, completion of DOD export control training, and DLA authorization. Additionally, the contractor must complete a CMMC Level 2 self-assessment and adhere to DLA packaging requirements. Government identification must be removed from non-accepted supplies, and performance is to occur at New Cumberland, PA, 17070-5002. Point of contact is Jeanette Heisey, reachable via email and phone for inquiries.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOW
Solicitation # SPE7M8-26-T-5708
The contract pertains to the procurement of a SWITCH, FLOW with NSN 5930-01-318-2893, quantity one unit, under purchase request 7017744547. The delivery must be completed within 10 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the acquisition type and solicitation timeline—revisions in effect on the solicitation issue date or award date control for simplified acquisitions, while the RFP issue date governs larger acquisitions unless an amendment updates the requirements. The alternate offeror is obligated to submit a complete data package covering both the approved and alternate parts. The solicitation number is SPE7M8-26-T-5708, posted on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 335314, and the contracting agency is the Electrical Devices Division within the Department of Defense. Performance is required at Fort Riley, Kansas, with Dondiego Boler listed as the primary point of contact, reachable via phone and email. No government identification may be removed from non-accepted supplies per regulatory requirements.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, FLOW
Solicitation # SPE7M8-26-T-5711
The contract pertains to the procurement of a SWITCH, FLOW item identified by NSN 5930-01-422-0537 and part number 45026, with a quantity of nine units to be delivered FOB origin within 174 days from the contract award. All supplies must comply with DLA packaging requirements as specified in RP001 and MIL-STD-2073-1E, including packaging methods, container types, cushioning materials, and marking standards aligned with MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA—such exceptions must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Packaging and shipping must adhere to DLA’s hazardous materials guidelines, with delivery directed to the DDSP New Cumberland facility in Pennsylvania. The unit price is $9.00 per unit, and no quantity variance is permitted. The item must be delivered no later than February 20, 2027, with an initial need date of February 8, 2027. The solicitation was issued under SPE7M8-26-T-5711, with responses due by August 17, 2026, and the contract falls under NAICS code 335314. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision defined by the solicitation or award date depending on acquisition size.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-368Q
The contract pertains to the procurement of 20 electromagnetic relays, part number SAH156A from TE Connectivity Corporation, identified by NSN 5945-00-997-3319, classified as a commercial off-the-shelf item and designated as a critical application item. The delivery is required within 20 days under FOB origin terms, with no variance permitted in quantity, and the item must conform to strict packaging standards per MIL-STD-2073-1E, including specific packaging methods, materials, and labeling requirements. Marking must adhere to MIL-STD-129 and include the special code ZZ for additional requirements, with each unit pack requiring lead content identification per IPC/JEDEC J-STD-609, mandating compliance with component lead finish labeling standards. Sampling and inspection follow zero-defect criteria under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels or AQLs as specified, and no non-conformances permitted in the sample unless otherwise stated. The contract is managed under solicitation SPE7M5-26-T-368Q, issued as a total small business set-aside, and the delivery is directed to the German Armed Forces Command at Dulles International Airport with designated point of contact and shipping instructions. The required delivery date is July 6, 2026, and the contract incorporates technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-368V
The contract pertains to the procurement of a single electromagnet relay with NSN 5945-01-239-5874, under purchase request 7017748927, requiring delivery within 20 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The offeror must provide a complete data package detailing both the approved and alternate parts, as no existing data is available. The solicitation, issued under SPE7M5-26-T-368V, was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 335314 for electrical equipment manufacturing. Performance is designated for Keyport, Washington, 98345-7610, with Jeanette Heisey of the Department of Defense’s Active Devices Division serving as the primary point of contact, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
Federal
59--RELAY ASSEMBLY, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QDB41
This contract pertains to the repair and potential modification of the RELAY ASSEMBLY under solicitation N0010426QDB41, with a mandatory Repair Turnaround Time (RTAT) of 141 days measured from the physical receipt of the F-condition asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The contract requires strict compliance with MIL-STD-130 for item marking, adherence to the manufacturer’s original technical specifications and drawings for all repair activities, and approval processes for any design, material, or part number changes, categorized under specific Code definitions. Government Source Inspection is required, and the contractor must maintain complete inspection records for 365 days after final delivery. The work must be performed at the contractor’s facility, with shipping and freight managed by the Navy per CAV protocols, and all deliverables must be accompanied by a firm-fixed-price quote detailing unit and total pricing along with the proposed RTAT, which must meet or exceed the government’s requirement unless capacity constraints are explained. The contract incorporates numerous mandatory far clauses and policy requirements including the Buy American Act, Small Business Subcontracting Plan, cybersecurity maturity model certification, and the mandatory use of Workflow Pro (WFP) Mod Assist for invoice and receiving transactions. The awardee must be an authorized distributor of the original manufacturer’s item, substantiated by documentation signed by a company official. All repairs must conform to designated CAGE 53711 and reference number 7104330-9, and any deviations require formal written approval from the NAVICP-MECH Contracting Officer. Pricing comparisons against new unit costs and delivery lead times must be included, and an evaluation fee ceiling of $[TBD] applies if the item is determined beyond repair. The contract imposes strict performance windows with an induction expiration date of up to 365 days, and any work after this date requires bilateral agreement. All communications, document handling, and distribution must comply with OPNAVINST 5510.1 and other DoD information safeguarding directives, with access to controlled documents restricted by distribution statement codes. Responses are due by September 4, 2026, and will be awarded bilaterally only upon written contractor acceptance.
Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335314
New
DIBBS
Electromagnetic Relay Supply (NSN 5945005526518)The contract is for the supply of an estimated 26 annual units of electromechanical relays identified by the National Stock Number 5945005526518, with all units required to meet military specifications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to bid, as defined by the Small Business Administration and Federal Acquisition Regulation 19.5. The North American Industry Classification System code 335314 indicates the focus is on electrical equipment manufacturing, specifically relays and solenoids. Delivery schedules include minimum quantity guarantees to ensure consistent supply, and the contract is administered by the Department of Defense through the Maritime Supply Chain organization. All proposals must be submitted by the response deadline of August 19, 2026, with the solicitation posted on August 4, 2026. The place of performance and contact details are unspecified, but the official solicitation page is accessible through the DIBBS portal for further information.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

NAICS: 484220
New
DIBBS
Supply Chain and Logistics CoordinationThe contract outlines the coordination of transportation and logistics services for the delivery of goods to DLA Distribution in New Cumberland, Pennsylvania, with strict adherence to DPAS rating requirements for all applicable orders. This includes ensuring priority handling and timely fulfillment in accordance with Department of Defense prioritization standards. The contractor is also required to fully integrate with the Web–Based Advanced Distribution System to enable accurate, real-time receiving reports and automated documentation of inbound shipments, ensuring end-to-end supply chain visibility and compliance. All activities under this subcontract fall under NAICS code 484220, indicating a focus on truck transportation of freight and commodities. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is issued by the Electrical Devices Division under the Department of Defense. Performance is exclusively designated for the New Cumberland, Pennsylvania, delivery location with a zip code of 17070-5002, and the work is structured as a subcontract under a broader DLA procurement framework. The successful bidder must demonstrate capability in secure, compliant logistics execution and seamless WAWF interoperability.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Palletization ServicesThe contract is for comprehensive packaging, labeling, and palletization services aligned with military standards MIL-STD-129, DLA RP001, and ASTM D3951, ensuring full compliance for defense-related logistics. All work must meet stringent requirements for documentation, marking, and physical handling, with additional capability to manage hazardous materials when needed. The services are intended to support Department of Defense operations and require strict adherence to standardized procedures for traceability, durability, and safety throughout the supply chain. The performance location is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the physical site where all packaging and labeling activities must be executed. This is a subcontract opportunity under NAICS code 493190, categorized as a non-set-aside procurement, open to eligible contractors without restrictions based on small business status or other set-aside programs. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, providing a twelve-day window for submissions. Interested parties must respond through the official DIBBS portal at the provided link, ensuring full alignment with technical specifications, timeline constraints, and quality controls enforced by the Electrical Devices Division of the Department of Defense.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Mounting Bracket (NSN: 5340015718473)Six precision-manufactured mounting brackets, identified by NSN 5340015718473, are to be produced in full compliance with military specifications, including adherence to DLA technical requirements, MIL-STD-129 for labeling, and ASTM D3951 for packaging to ensure uniformity and readiness for military logistics. The work must be executed to exacting standards to support defense operations, with all units slated for delivery to the designated place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. This subcontract, posted by the Electrical Devices Division under the Department of Defense, is classified under NAICS code 332722 and requires proposals to be submitted by the deadline of August 17, 2026, with no set-aside provisions applied. The solicitation is accessible via the DIBBS platform, and the vendor must ensure all documentation, labeling, and packaging strictly follow federal military standards to meet contractual obligations.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machine Screw SupplyThe contract calls for the supply of one precision machine screw designated by NSN 5305015077486 and part number 6392799, manufactured to meet Raytheon specifications and applicable MIL-SPEC standards for integration into a defense end item identified by NSN 2355-01-494-7606. The screw must comply with rigorous military quality and performance benchmarks to ensure reliability in critical defense applications. The solicitation is structured as a subcontract under NAICS code 332721, targeting specialized manufacturing capabilities in fastener production. Performance is required at Camp Lejeune, North Carolina, with a response deadline of August 17, 2026, and the opportunity was posted on August 5, 2026. The contracting entity is the Electrical Devices Division within the Department of Defense, and detailed information can be accessed via the provided DIBBS link.
Precision Turned Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Notification ServicesThe contract requires the provision of hazard warning labels, safety data sheets (SDS), and radioactive materials notifications to ensure full compliance with DFARS clauses 252.223-7001 and 252.223-7006, which govern the handling and communication of hazardous materials within Department of Defense contracts. All deliverables must meet exacting federal standards for accuracy, clarity, and accessibility to protect personnel and ensure regulatory adherence across all associated operations. The work is scoped as a subcontract under NAICS code 541620, indicating engineering and other technical services, and is expected to be performed at Fort Eustis, Virginia, with a ZIP code of 23604-5577. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside designation specified, opening eligibility to all qualified offerors.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 323111
New
DIBBS
Military Labeling and Barcoding ServicesThe contract requires full compliance with MIL-STD-129 for the marking and labeling of all military containers, encompassing barcoding, unit identifier and quantity unit package markings, and OSHA-compliant hazard communication labels. All work must adhere to strict defense standards to ensure proper tracking, handling, and safety throughout the supply chain. Performers are expected to deliver accurate, durable, and legible labels compliant with federal regulations for use in military logistics environments. This is a subcontract opportunity under the NAICS code 323111, issued by the Electrical Devices Division within the Department of Defense, with performance required at Fort Eustis, Virginia, zip code 23604-5577. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. Interested parties must submit proposals through the DIBBS platform using the provided link, and failure to meet any labeling requirement could result in rejection or non-compliance penalties.
Commercial Printing (except Screen and Books)

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423840
New
DIBBS
Military Packaging and Preservation ServicesThe contract seeks commercial and hazardous materials packaging services that strictly adhere to MIL-STD-129, ASTM D3951, and DLA IP025 standards, ensuring proper preservation techniques and secure palletization for military use. All work must meet rigorous defense specifications for durability, labeling, and handling of sensitive or dangerous goods, with compliance verified throughout the packaging and preparation process. The services are required for deployment in support of Department of Defense operations and must be executed with precision to ensure readiness, safety, and logistics efficiency. The solicitation is issued under NAICS code 423840 as a subcontract opportunity by the Electrical Devices Division of the Department of Defense, with performance required at Fort Eustis, Virginia, zip code 23604-5577. Interested parties must submit proposals by August 17, 2026, following the online solicitation posted on August 5, 2026. While no set-aside designation is specified, full compliance with federal packaging regulations and the ability to deliver consistent, auditable results are essential for qualification and award consideration.
Industrial Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Pressure Switch Supply (NSN 5930-00-192-4507)The contract solicits the supply of five pressure switches identified by NSN 5930-00-192-4507, distributed across two contract line items, with delivery required to Fort Eustis, Virginia, under the procurement authority of the Department of Defense’s Electrical Devices Division. All items must strictly adhere to DLA technical standards, and contractors are obligated to submit a comprehensive data package if proposing any alternate parts in lieu of the specified NSN. The solicitation, posted on August 5, 2026, closes for responses on August 17, 2026, and is classified as a subcontract under NAICS code 332112, indicating manufacturing of electrical equipment and wiring supplies. No set-aside designation or point of contact information is provided, and the procurement is conducted through the DIBBS platform with the reference number SPE7M826T5710.
Nonferrous Forging

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Sustainable Products Compliance (Environmental Standards)The contract requires strict adherence to federal sustainability standards under FAR 52.223-23 for all products and packaging supplied under this subcontract, ensuring compliance with environmental requirements set by the Department of Defense. The obligation extends to verifying that materials, manufacturing processes, and packaging solutions meet established federal guidelines for reducing environmental impact, promoting reuse, and minimizing hazardous substances. This compliance is non-negotiable and must be documented and demonstrated throughout the supply chain to meet defense procurement criteria. The solicitation is issued under NAICS code 541620, indicating a focus on scientific research and development services related to environmental compliance and sustainable product design. The place of performance is designated as FPO, 09573, suggesting delivery or service obligations aligned with military logistics operations. The response deadline is August 17, 2026, with the solicitation posted on August 5, 2026, allowing a narrow twelve-day window for submission. Bidders must ensure their proposals explicitly outline how they will meet and verify compliance with the specified environmental regulations, as failure to do so will result in disqualification.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 483111
New
DIBBS
Ocean Transportation / Freight Forwarding (If Applicable)The contract solicits sea transportation services for defense supplies using U.S.-flagged vessels, strictly adhering to Defense Federal Acquisition Regulation Supplement requirements and applicable maritime regulations. It emphasizes compliance with federal standards for the secure and lawful movement of military cargo, ensuring that all operations are conducted under the jurisdiction of U.S. law and within the scope of national defense logistics protocols. The transportation must be executed by qualified carriers capable of meeting the rigorous security, documentation, and operational demands associated with defense-related freight. This is a subcontract issued under the NAICS code 483111 for Ocean Transportation of Freight, with a response deadline of August 17, 2026, and a posting date of August 5, 2026. The place of performance is designated as FPO with ZIP code 09573, indicating operations tied to overseas military locations. The ordering activity is the Electrical Devices Division under the Department of Defense, and the contract is managed through the DIBBS system with the solicitation number SPE7M826T5713. All proposers must demonstrate proven capability in handling defense cargo, compliance with U.S. flag vessel mandates, and the ability to meet stringent regulatory timelines and reporting obligations.
Deep Sea Freight Transportation

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract requires the provision of hazardous materials labeling, safety data sheet preparation, and full compliance with OSHA and DFARS regulations for all deliverables under a defense subcontract. The work must ensure that all hazardous materials used or shipped in support of defense Contract deliverables are properly identified, documented, and labeled according to federal safety and defense procurement standards. Compliance with OSHA’s Hazard Communication Standard and DFARS requirements is mandatory to support the safe handling, storage, and transportation of controlled substances and materials in military applications. The performance location is designated as FPO, with the ZIP code 09573, indicating potential deployment or logistical operations in a military or overseas setting. The NAICS code 541690 reflects that this is a professional, scientific, and technical service contract focused on environmental, health, and safety consulting, specifically tailored to meet defense-specific regulatory obligations. The opportunity is open to subcontractors responding by August 17, 2026, and is managed under the Department of Defense through the Electrical Devices Division.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
Push Switch (NSN: 5930013749341) Manufacturing and SupplyThe contract entails the manufacturing and delivery of a military-spec push switch with the National Stock Number 5930013749341, requiring strict adherence to technical specifications, environmental standards, and packaging requirements defined for defense applications. The product must meet all military-grade performance criteria to ensure reliability under extreme conditions, including durability, shock resistance, and operability in challenging climates. Compliance with relevant defense regulations and quality control protocols is mandatory throughout production and final inspection. The solicitation is issued as a subcontract under the NAICS code 334419, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is to be carried out at an FPO location with ZIP code 09573, indicating delivery to a military postal facility, likely supporting overseas operations. The contracting activity is managed by the Electrical Devices Division within the Department of Defense, emphasizing the critical nature of this component in defense systems. No set-aside provisions are specified, and the offeror must be prepared to fulfill all contractual obligations without regard to small business preferences.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details