This Solicitation opportunity from Department Of Defense was posted on September 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

COLLAPSIBLE, JMIC

Closed

SPE8ED-26-T-1389Federal

Submission Closed09/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332439

New

DIBBS

ISU Divider Supply (NSN 8145-01-384-9253)This subcontract involves the manufacture or sourcing of 10 ISU Dividers under NSN 8145-01-384-9253 for prime contractors supporting DLA Troop Support equipment contracts. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. All units must be packaged and marked according to ASTM D3951 and MIL-STD-129 standards, with palletization following RP001 guidelines. The contract requires the delivery of the 10 units FOB Origin to Niagara Falls, New York. Managed under NAICS code 332439 for the Department of Defense, the opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0091

Solicitation SPE7M4-27-Q-0091 is issued by the DLA Weapons Support Fluid Handling Division for the procurement of 983 units of Loop Clamps, identified by NSN 5340-00-817-4762. This item is designated as a critical application item and requires the supplier to meet the current revision of the Source Control Drawing. Offerors not listed as approved sources must obtain approval from the Original Equipment Manufacturer and provide certification to the DLA. The delivery is required within 90 days after order, with a material need ship date of November 4, 2026, and is shipped FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract is not a small business set-aside and falls under NAICS code 332439. Due to the nature of the technical data, this procurement is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and authorization from the DLA controlling authority. Compliance with CMMC Level 2 certification from a C3PAO is also required. Packaging and marking must adhere to RP001, MIL-STD-129, and MIL-STD-130N, while hazardous materials must follow IP025. Award will be based on best value, evaluating price, offered delivery, and past performance. Invoicing and payments must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

SHIPPING AND STORAGE C

Solicitation # SPE8ED-27-T-0090

Solicitation SPE8ED-27-T-0090 is a Request for Quotations issued by DLA Troop Support Construction and Equipment Containers for the procurement of two shipping and storage containers, specifically test kits identified by NSN 8145-01-732-8534 and part number A216 from Flambeau, Inc. The required delivery date is June 8, 2027, with a delivery window of 120 days. Supplies are to be delivered to the DLA Distribution DSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of Wide Area Workflow for invoicing and payment. The solicitation also incorporates critical federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE8ED-27-T-0093

Solicitation SPE8ED-27-T-0093 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment Containers office for the procurement of four collapsible equipment racks. The required items are identified by NSN 8145-01-530-2949 and part number WFI-CER40-B from Wel-Fab Defense LLC. Delivery is required within five days of award to Mountain Home Air Force Base, Idaho, with an original required delivery date of February 6, 2025. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Additionally, the contractor must comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information and follow the Hazard Communication Standard for any hazardous materials. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This acquisition falls under NAICS code 332439 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

DRUM, SHIPPING AND STOR

Solicitation # SPE8E9-27-T-0137

Solicitation SPE8E9-27-T-0137 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 4,000 steel shipping and storage drums (NSN 8110000307780), split into two line items of 2,000 units each. This is a Service-Disabled Veteran-Owned Small Business set-aside requiring SBA certification. The drums must be hazardous waste approved, fully assembled, and manufactured according to MIL-DTL-6054G and UN/POP 1A2/Y1.5/150 standards. Key technical specifications include a 208-liter rated capacity, a minimum material thickness of 1.10mm for the drum and 2.40mm for the locking ring, and a rust-inhibiting exterior coating capable of passing ASTM-B-117 salt spray testing. Delivery is required within 48 days after order, with a final required delivery date of February 24, 2027, to facilities in New Cumberland, Pennsylvania, and Tracy, California. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, ensuring physical and mechanical protection during transport. The government will not evaluate offers utilizing additive manufacturing. Compliance with the Buy American Act and Berry Amendment is required, and all invoicing must be processed through the Wide Area Workflow system. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1401

Solicitation SPE7L1-27-T-1401 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of four mounting brackets, identified as NSN 5340-01-464-7761. This is designated as a critical application item that must be produced in accordance with basic drawing 19207 12465329 Revision E and several other reference drawings. The required delivery date is February 27, 2027, with a need ship date of April 6, 2027, for delivery to the DLA Distribution DSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, while property identification must follow MIL-STD-130N. Due to the nature of the technical data, this procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment restrictions, and requires the use of the Wide Area WorkFlow system for all electronic invoicing and receiving reports.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8ED-27-T-0154

Solicitation SPE8ED-27-T-0154 is a request for quotations issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of 10 units of ISU Dividers, identified by NSN 8145-01-384-9253. This commercial off-the-shelf item is to be delivered to a consignee in Niagara Falls, New York, with a required delivery date of October 22, 2026, and a delivery window of 20 days after receipt of order. The procurement is not a small business set-aside and falls under NAICS code 332439. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1 and 52.246-2. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Palletization must comply with RP001. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. The solicitation incorporates several critical federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting. Quotations must be submitted by November 9, 2026, and additive manufacturing is prohibited unless specifically approved by the contracting officer.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

ISO Shipping Containers - Quadcon

Solicitation # SPE8ED27Q0080

The Department of Defense, through DLA Troop Support, has issued a pre-solicitation notice for the procurement of 149 Quadcon ISO Shipping Containers under National Stock Number 8150-01-483-9115. This requirement is designated for an OCONUS location and falls under NAICS code 332439. This notice serves as an announcement of intent and is not a formal request for quote. Full requirements will be detailed in the official solicitation published on DIBBS. All responsible sources are eligible to submit bids or proposals in accordance with FAR 5.207 (c) (16). The primary point of contact for this action is Avril Dickerson.

POSTED

DEADLINE

2-20 foot Containers with Gantry Beam and Chain Lift

Solicitation # W912ES27QA004

Solicitation W912ES27QA004, issued by the U.S. Army Corps of Engineers, St. Paul District, is a firm-fixed-price request for the procurement of two brand-new 20-foot High Cube open-side storage containers. These units require custom structural steel fabrication to integrate a 1-ton capacity Load Handling Equipment crane and hoist system. The system must feature internal and external gantry beams with a manual chain hoist capable of extending 6 feet beyond the container footprint. Key technical requirements include PE-stamped structural calculations, compliance with EM 385-1-1 and ASME standards, and a 125 percent proof load test. The containers must be finished with a durable commercial-grade exterior coating, while all gantry rails and hoist components must be painted in industrial Safety Yellow. The contract is a total small business set-aside with a final delivery deadline of March 1, 2027, to Fountain City, Wisconsin. Final acceptance is contingent upon a physical inspection and functional demonstration by USACE staff to ensure the hoist traverses the rails and extends fully without mechanical defects or instability. Required deliverables at the time of testing include the signed PE structural review, load test certification, and an approved Activity Hazard Analysis. Proposals must be submitted electronically through the PIEE Solicitation Module, and the government will evaluate awards based on price, technical ratings, and past performance as recorded in the Supplier Performance Risk System.

POSTED

DEADLINE

Steering Control Shipping and Storage Container FabricationThis subcontract, issued by Construction and Equipment Containers for the Department of Defense, involves the fabrication and supply of specialized shipping and storage containers designed for prime contractors fulfilling DLA supply contracts. The contractor is responsible for manufacturing 11 containers according to NSN 8145008564997 specifications, ensuring all units include internal blocking and bracing for mechanical protection and adhere strictly to DLA Packaging Requirements for Procurement. Key deliverables include the completed containers and a validated First Article Test report as specified under CLIN 0002. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332439, with the place of performance located in Anniston, Alabama. The response deadline for this requirement is November 6, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE8ED-27-T-0152

Solicitation SPE8ED-27-T-0152 is a request for quotations from the Defense Logistics Agency for the procurement of 11 steering control shipping and storage containers (NSN 8145-00-856-4997) and one first article test unit. The items are to be delivered to the Anniston Army Depot by April 15, 2026, with a delivery lead time of 60 to 95 days. The procurement is conducted under the First Destination Transportation program, and while the solicitation is not a small business set-aside, it incorporates a HUBZone price evaluation preference. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment, SAE AS9003 or ISO 9001 compliance for manufacturer inspection systems, and approved JCP certification for accessing export-controlled technical data under ITAR or EAR. Packaging must follow MIL-STD-2073-1E and RP001 requirements, with marking compliant with MIL-STD-129. Inspection and acceptance will occur at the origin. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

BOX, SHIPPING AND STORA

Solicitation # SPE4A6-27-T-6899

Solicitation SPE4A6-27-T-6899 is a small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of two shipping and storage boxes, identified by NSN 8145-01-658-0348 and Boeing part number MA280019-8. The contract specifies a delivery timeframe of 20 days after order, with an original required delivery date of October 14, 2026. Terms are set as FOB Origin, with both inspection and acceptance occurring at the destination in Easton, Pennsylvania. The contractor is required to use traceable shipping means and is prohibited from using parcel post. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All items must be marked and labeled according to MIL-STD-129, and palletization must adhere to RP001. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity reporting standards under DFARS 252.204-7012.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

Solicitation SPE8ED-26-T-1389 is a request for quotations issued by DLA Troop Support for the procurement of two Collapsible Joint Modular Intermodal Container (JMIC) assemblies, identified by NSN 8145015881810 and Naval Sea Systems Command part number 7517221-1. The procurement is governed by NAICS 332439 and requires strict adherence to Naval Sea Systems Command drawings 7517221 and DL7517221. A critical component of the contract is the mandatory Government First Article Testing (FAT) phase, requiring the delivery of two units to the Naval Surface Warfare Center in Colts Neck, New Jersey, within 150 calendar days of the contract date. Following FAT approval, the contractor must proceed with full production, which is subject to Production Lot Testing (PLT) where a failure of a sample results in the failure of the entire production lot. The contract specifies that inspection and acceptance will occur at the origin, with the DCMA Quality Assurance Representative required to be present during the first article inspection. Technical requirements include a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses approved by NAVSEA. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow (WAWF) system. The solicitation also incorporates various FAR and DFARS clauses, including cybersecurity requirements under DFARS 252.204-7012 and a price evaluation preference for certified HUBZone small businesses.

General Info

DLA Troop Support seeks two JMIC assemblies requiring first article and production testing.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

NAICS

332439 - Other Metal Container Manufacturing

Place of Performance

UNIT 100259 BOX 1, FPO, AE, 09588, USA

Set-Aside

NONE

Documents

SPE8ED-26-T-1389 Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedSep 10

Solicitation

Notice updatedSep 10

The notice title changed. The notice description changed.

Notice updatedSep 10

The notice title changed. The notice description changed.

Response DeadlineSep 21

Deadline has passed

Submission Closed

09/21/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Office AddressUSA

Contacts

Ogden Howard

contact@example.gov

+1 (555) 000-0000

Full Description

COLLAPSIBLE,JMIC
COLLAPSIBLE JMIC 3.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NAVAL SEA SYSTEMS COMMAND (53711)
P/N 7517221-1
RQ047: Ordnance Handling Equipment Contact Information RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
UNLESS OTHERWISE NOTED
FIRST ARTICLE TESTING IS REQUIRED
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
PRODUCTION LOT TESTING APPLIES
TECHNICAL DATA AVAILABILITY:
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
TDP Rev B Gen 2 IAW BASIC DRAWING NR 53711 7517221 REVISION NR F DTD 07/19/2021 PART PIECE NUMBER:
SPE8ED-26-T-1389
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516536 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516617 REVISION NR DTD 06/16/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7516774 REVISION NR DTD 10/11/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517168 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517169 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517170 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517171 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517172 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517173 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517174 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517175 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517176 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517177 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517178 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
SPE8ED-26-T-1389
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517179 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517222 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517223 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517224 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517226 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517227 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517228 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517229 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517230 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517231 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517232 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517233 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517234 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517225 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
SPE8ED-26-T-1389
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517235 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517236 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517237 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517238 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517239 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517240 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517241 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517242 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517244 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517245 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517246 REVISION NR B DTD 11/06/2009 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517247 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517248 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517249 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
SPE8ED-26-T-1389
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517250 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517251 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517252 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517253 REVISION NR B DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517254 REVISION NR C DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517255 REVISION NR A DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517256 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517257 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517258 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517259 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517260 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517261 REVISION NR B DTD 11/01/2005 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410933 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410941 REVISION NR A DTD 11/01/2005 PART PIECE NUMBER:
SPE8ED-26-T-1389
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 8410942 REVISION NR DTD 08/02/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 53711 7517221 REVISION NR DTD 10/13/2010 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 53711 7517221 REVISION NR G DTD 08/13/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 08/26/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-PLT3 REVISION NR DTD 07/17/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018220738 0001 EA 2.000
NSN/MATERIAL:8145015881810
DELIVERY (IN DAYS):0205
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
DLA TROOP SUPPORT SUPPLEMENTAL QUALITY ASSURANCE PROVISION (SQAP) SQAP NSNs 8145-01-588-1810 ,,,,,,,,,,24 JAN 2013 8145-01-588-1825 8145-01-588-1830
SPE8ED-26-T-1389
SECTION B
PR: 7018220738 PRLI: 0001 CONT’D
DRAWING: (53711) 7517221
1. This supplemental quality assurance provision is to be used in conjunction with the following drawing: Naval Sea Systems Command (53711) drawings 7517221 and DL7517221. This document is applicable to the following item: Collapsible Joint Modular Intermodal Container (JMIC) Assembly.
2. This SQAP establishes the requirements and schedule for the required Government First Article Test Sample and Government Production Lot Sampling Testing, when DLA is the procuring activity.
3. The JMIC shall be fabricated in accordance with drawings Naval Sea Systems Command drawings 7517221 and DL7517221.
4. Government First Article Testing is required as follows: 4.1 Competitive procurement of the subject item is approved contingent upon submittal, examination, inspection, testing, and approval of the First Article samples. The First Article Sample shall consist of two (2) JMIC Assemblies.
4.2 Prior to submission of the First Article for inspection, the contractor shall perform a complete inspection to assure conformance to all drawing requirements. The inspection is to be performed in the presence of the DCMA-Quality Assurance Representative (QAR). A copy of the dimensional, material, inspection reports, and surface treatments shall be mailed to the testing activity together when the First Article Test Sample is delivered.
4.3 The First Article Inspection Report is to be prepared in the contractor#s format. As a minimum the content of the report shall appear as presented in Data Item Description (DID) DI-NDTI-80809.
4.4 The First Article NSN/Part Number: 8145-01-588-1810 Quantity: 2 EA Purchase Request: 7018220738QTY: 2 Delivery: 205 days ADO