Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Texas was posted on September 26, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Graphics Wraps

Closed
DFW12882State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339950
New
SLED
616496 DISTRICT 4 Scheduled and Emergency Fabrication and Installation of Overhead and Ground Moun
Solicitation # BD-27-1030-0H100-0H002-135427
The Massachusetts Department of Transportation is soliciting bids for the scheduled and emergency fabrication and installation of overhead and ground mounted guide signs at various locations within District 4. This open market project has an estimated total value of 900,000 dollars and includes provisions for price adjustments regarding structural steel, reinforcing steel, hot mix asphalt, Portland cement, diesel fuel, and gasoline. The scope of work encompasses highway and road sign or guardrail construction and repair services, with all work subject to the regulations of the Architectural Access Board and the prevailing wage rates determined by the Commissioner of the Massachusetts Department of Labor and Workforce Development and the Division of Occupational Safety. To be eligible to bid, contractors must be pre-qualified in the SIGNING-STRUCTURAL category, possess a valid MassDOT vendor code, and submit a completed Request Proposal Form (R109) to the MassDOT Director of Prequalification. Proposals must be submitted electronically via www.bidx.com by December 8, 2026, at 2:00 P.M., as paper copies will not be accepted. Bidders are required to apply for a Digital ID at least 14 days before the bid opening and must provide a proposal guaranty equal to 5% of the bid value. This procurement is eligible for the Small Business Purchasing Program.
Department of Transportation

POSTED

about 20 hours ago

DEADLINE

in 21 days
NAICS: 339950
New
SLED
Entrance Monument Sign — Erie County Angola AgriPark
Solicitation # 2140894
The Industrial Land Development Corporation (ILDC) is soliciting competitive bids for the design, engineering, permitting, fabrication, and installation of a freestanding, double-sided, non-illuminated monument sign at the Erie County Agribusiness Park in Angola, New York. The sign must feature the official park name and logo, dimensional lettering, address numerals, and a stone-faced structural base. It must include twelve removable tenant identification panels, initially installed blank, and comply with Town of Evans zoning and building codes, specifically maintaining a height under 6 feet and a face area not exceeding 96 square feet. The successful contractor will provide all labor, materials, and professional engineering, including New York State Professional Engineer-sealed structural drawings. This project is classified as public work under New York State Labor Law Article 8, requiring all contractors to be registered with the New York State Department of Labor and pay applicable Erie County prevailing wages. Bids must be submitted as a single PDF by December 17, 2026, and will be awarded to the lowest responsive and responsible bidder. The anticipated contract award is January 2027, with a target completion date of May 30, 2027. Payment is structured around milestones, including a fabrication payment of up to 40% upon shop drawing approval. Participation from certified Minority- and Women-owned Business Enterprises (MWBE) and Service-Disabled Veteran-Owned Businesses (SDVOB) is encouraged.
Erie County Industrial Development Agency

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 339950
New
SLED
Augusta County Courthouse - Monument Sign
Solicitation # 111201-27-01
Augusta County, Virginia, is soliciting bids for the construction of a new lighted monument sign to serve the Augusta County Government Center and Augusta County Courthouse in Verona, Virginia. The scope of work includes all necessary labor, equipment, and materials for the installation of a double-sided sign, as well as associated site work such as excavation, final grading, seeding, and mulching. The project requires a connection to electricity provided via the Dick Huff Lane Road Improvement Project and mandates the protection of existing trees, roadways, and curbing throughout the construction process. The contract will be awarded to the lowest responsive and responsible bidder based on the Total Base Bid Amount. To be considered responsible, bidders must demonstrate sufficient financial ability through payment and performance bonds, appropriate experience, and a clean legal and contractual history. Bidders must be licensed in Virginia as either a Class A or Class B contractor depending on the contract value. Sealed bids must be submitted by December 22, 2026, and must include a bid bond or certified check for 5% of the bid amount. Administrative requirements include the submission of a comprehensive CQC plan before work begins and the delivery of as-built drawings upon completion. Progress payments must be submitted electronically using AIA G702 and G703 forms, accompanied by waste disposal reports. All work must adhere to the provided architectural exhibits and comply with the Americans with Disabilities Act and the Virginians with Disabilities Act. Final completion is required within 30 days of substantial completion.
Augusta County Government

POSTED

4 days ago

DEADLINE

in about 1 month
NAICS: 339950
New
SLED
THE FURNISHING, DELIVERY AND INSTALLATION OF WAYFINDING SIGNS
Solicitation # B-27-149
The County of Middlesex is soliciting bids for a firm fixed contract to furnish, deliver, and install wayfinding signs for Nexus and Middlesex College, located at 2600 Woodbridge Ave, Edison, NJ. The scope of work requires the winning bidder to handle complete fabrication, delivery, and installation, including the development of construction and shop drawings and the electrical design for illuminated signs. Key deliverables include stamped engineering drawings for specific signs and sealed calculations for wind and seismic loads. All signage must comply with local, state, and federal building and electrical codes, with internally illuminated signs requiring UL listing. Materials must meet specific safety standards, such as Class C flame spread ratings for interior trim and UL flame class 92HB for acrylic. The contract will be awarded to the responsible bidder based on the lowest base bid, lowest net bid (combining base bid and options), or unit prices. Bids must be submitted electronically via the Middlesex County procurement portal by December 3, 2026. Required documentation includes a non-collusion affidavit, corporate resolution, price certification, and a public works certification of non-debarment. The contractor must adhere to prevailing wage laws, the Davis-Bacon Act, and the Americans with Disabilities Act. Payment is processed bi-monthly upon approval by the Board of County Commissioners, and all items are guaranteed for at least one year following acceptance.
Office of Purchasing

POSTED

4 days ago

DEADLINE

in 16 days
NAICS: 339950
New
SLED
RFQ-171-270000000056-1 | 2027 DNR IC 9301-3 CHARTER BOAT DECALS
Solicitation # RFQ-171-270000000056
The State of Michigan Department of Technology, Management and Budget is soliciting bids for the production and delivery of 2,000 charter boat decals for the year 2027. These decals must be 5 by 8 inches with rounded corners, constructed from 4 mil white vinyl with an over laminate and permanent adhesive to ensure they are weatherproof and suitable for fiberglass charter boats. The design requires Pantone 356 ink with white text. A PDF proof must be submitted and approved prior to production. Bids are awarded based on the best price and value, and only prequalified vendors will be considered. Deliverables must be cut into singles, carton packed, and shipped F.O.B. destination, inside delivery to Dimondale, Michigan. Strict packaging and pallet specifications are required, including the use of single face hardwood pallets and specific labeling for commodity and purchase order numbers. Vendors must provide a detailed quote letter and a mandatory subcontractor disclosure form to avoid disqualification. Payment is processed via Electronic Funds Transfer within 45 calendar days of invoice receipt or final acceptance. The contract is governed by the State of Michigan Procurement Standard Contract Terms Short Form, which includes requirements for confidentiality, intellectual property rights, and compliance with the Michigan Prevailing Wage Act where applicable.
DTMB

POSTED

4 days ago

DEADLINE

in 1 day

AI Contract Overview

Show more

The Dallas-Fort Worth International Airport Board is seeking quotes for the procurement of graphics wraps as outlined in the provided specifications and statement of work. Interested parties must submit their quotes electronically through the designated Bonfire hub portal by 2:00 pm Central Time on Wednesday, October 1, 2025. Submissions sent via email or traditional mail will not be accepted. All pricing must be inclusive of delivery to the DFW International Airport location at 3122 East 30th Street in Texas. It is important for vendors to note that the Airport Board is a tax-exempt entity. The primary point of contact for this solicitation, identified as DFW12882, is Monica Henry.

General Info

DFW Airport seeks quotes for graphics wraps via Bonfire portal by October 1, 2025.

Place of Performance

TX, USA

Set-Aside

NONE

Documents

0

No documents available

No documents were posted with this contract.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • 616496 DISTRICT 4 Scheduled and Emergency Fabrication and Installation of Overhead and Ground MounOpen now, due in 22 days
  • Sign Fabrication (Cabinet & Components)Open now, due in 30 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTexas → Dfw International Airport
Contacts1 person available
OfficeTX, USA

Full Description

Show more
The Dallas-Fort Worth International Airport Board (Airport Board) intends to procure Graphics Wraps as described within the attached Specifications/SOW. QUOTES must be submitted through dfwairport.bonfirehub.com, and WILL NOT be accepted via mail or email. Quotes will be accepted until 2:00 pm (Central Time) on Wednesday, October 1, 2025.
Pricing shall include delivery F.O.B. DFW International Airport, 3122 East 30th Street, DFW Airport, Texas 75261. The Airport Board is tax-exempt.

More opportunities from Texas → Dfw International Airport

Same awarding agency

NAICS: 541512
New
SLED
Ignition Edge and MQTT Integration with DeltaV
Solicitation # DFW1234
The Dallas-Fort Worth International Airport Board is soliciting quotes for the procurement of Ignition Edge and MQTT Integration with DeltaV under solicitation number DFW1234. The scope of work involves providing software licensing, technical support, and SCADA programming services to implement an Ignition Edge solution with MQTT communication capabilities for bidirectional and secure integration with a DeltaV environment. Key deliverables include one licensed instance of Ignition Edge, one licensed MQTT Engine Module, a BasicCare Support Plan, and up to 16 hours of SCADA programming and integration support, including configured MQTT communication and basic functional testing. Quotes must be submitted exclusively through the Bonfire portal by 2:00 pm Central Time on November 18, 2026, and must remain valid for 60 days and include a full warranty statement. The award will be granted to the lowest responsive and responsible bidder, with the possibility of the Board splitting the award among multiple vendors. All pricing must be F.O.B. destination to the DFW International Airport Central Warehouse, with deliveries accepted Monday through Friday from 8:00 A.M. to 4:00 P.M. The contractor must comply with Executive Order No. 11246 and OSHA regulations regarding hazardous chemical labeling and Material Safety Data Sheets.
Computer Systems Design Services

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 561710
New
SLED
Request for Information- DFW Airport Avian Roost Abatement Service
Solicitation # PMM-11102026
The Dallas Fort Worth International Airport Board has issued a Request for Information (RFI) under solicitation PMM-11102026 to gather data on avian roost abatement services. The primary goal is to identify effective methodologies to reduce bird strikes and increase aircraft safety, specifically within the Central Terminal Areas and Parking Lots. The scope of work includes pre-operations monitoring for nesting activity, the removal of inactive nests, active roost mitigation, and success monitoring. The airport is interested in various dispersal methods such as falconry, drones, and audio or visual tools, though the permanent installation of wildlife deterrents is strictly prohibited. All proposed services must align with FAA Part 139 Certificated Airports requirements and the airport's FAA-approved Wildlife Hazard Management Plan. This process is for information-gathering purposes only and will not result in a direct contract award or a formal evaluation for award. However, the responses may inform a future Request for Proposal (RFP). Interested companies must submit their responses via the Bonfire e-solicitation portal by November 23, 2026, at 2:00 p.m. Central Time. Submissions should include a company overview, technical competencies, innovative bird control methodologies, preliminary recommendations with effectiveness examples, and non-binding cost information, including typical cost ranges and cost drivers. Rashmi Kulkarni serves as the primary point of contact and contract administrator for this solicitation.
Exterminating and Pest Control Services

POSTED

7 days ago

DEADLINE

in 6 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS