This Sources Sought opportunity from Department Of Defense was posted on April 6, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Grissom Bus Printed Circuit Board Connectors and Harnesses

Closed

FA8601-18-R-0043Federal

Submission Closed04/12/2018, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334417

New

Federal

NSN 5935-017185180; PN 5160T66P03 or PN 21-901601-003; CONNECTOR,PLUG,ELECTRICAL

Solicitation # SPE4A527R0028

POSTED

DEADLINE

Manufacturing of Electrical Connector Backshells (NSN 5935-01-469-9678)This subcontract involves the manufacture and supply of 34 precision electrical connector backshells, specifically part number HS5842WS1606L under NSN 5935-01-469-9678. The components are to be fabricated using precision CNC machining in strict accordance with Technical Data Package Rev A Gen 1 to support prime contractors delivering to the DLA Weapons Support Active Devices Division of the Department of Defense. To ensure the integrity of these Critical Application Items, the manufacturer must adhere to AS9100 or ISO 9001 quality control standards. The work is categorized under NAICS code 334417, with the place of performance located in Tracy, California. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Electrical Connector Shells (NSN 5935-01-464-4997)This subcontract involves the manufacture or procurement of 98 electrical connector shells under NSN 5935-01-464-4997 for the Department of Defense, specifically supporting the DLA Weapons Support Maritime Supply Chain ESOC Buys. The contractor is responsible for ensuring all units are marked and labeled according to MIL-STD-129 standards and must possess a valid CAGE code and Unique Entity Identifier to be eligible. The project falls under NAICS code 334417 and specifies New Cumberland as the place of performance. Interested parties must submit their responses by October 30, 2026, to fulfill the delivery requirements for these critical components.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturing of Connector Adapters (NSN 5935-01-461-1392)This subcontract involves the manufacture of 305 connector adapters under NSN 5935-01-461-1392 for the DLA Weapons Support Active Devices Division. Production must strictly adhere to TDP Rev A Gen 2 and Basic Drawing NR 19200 12347631, Revision U, utilizing precision machining or molding to ensure all specified tolerances are met. Final products must be packaged in accordance with MIL-STD-129. The contractor is required to maintain rigorous regulatory and security standards, including CMMC Level 2, ITAR, and EAR compliance, while adhering to the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fiber Optic Contacts (NSN 6060014242293)This subcontract involves the supply of 1,285 units of Fiber Optic Contacts, identified by NSN 6060014242293, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The selected provider is responsible for manufacturing or sourcing these components while strictly adhering to NAVSEA restrictions regarding the intentional addition of mercury. All deliverables must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The contract requires full compliance with the Buy American Act and the Berry Amendment. Delivery of the 1,285 units is specified as FOB Origin, with performance taking place in New Cumberland. This procurement falls under NAICS code 334417 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935-01-165-8685)This subcontract involves the procurement or manufacture of two electrical plug connectors under NSN 5935-01-165-8685 to support prime contractors on Department of Defense projects. Managed by the DLA Weapons Support Active Devices Division, the contract requires strict adherence to ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. The project falls under NAICS code 334417 and specifies Fort Eustis as the place of performance. Interested parties must respond by October 30, 2026, following the solicitation posted on October 19, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supplier of Electrical Receptacle Connectors (NSN 5935010979974)This subcontract involves the supply of one electrical receptacle connector under NSN 5935010979974 for prime contractors supporting DLA supply contracts. The selected supplier is responsible for manufacturing or sourcing the item in strict accordance with the Detailed Drawing, Parts List, and Change Notice. Compliance with specific marking and identification standards is required, including bare item marking per RQ017 and the removal of government identification per RQ011, while adhering to all cited Quality Assurance Provisions for commercial items. The contract is issued by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt, with performance taking place in Ashland. The opportunity is categorized under NAICS code 334417. Interested parties must respond by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935-01-737-7502)This subcontract involves the manufacture or procurement of 2,000 electrical plug connectors for prime contractors under DLA supply contracts. The components must strictly adhere to NSN 5935-01-737-7502 and Federal Stock Class 5935 specifications. All deliverables must be packaged and marked in accordance with MIL-DTL-55330, MIL-STD-2073-1E, and MIL-STD-129 standards, with final delivery conducted FOB Origin. To be eligible, the provider must maintain QPL certification, ensure NIST SP 800-171 compliance, and adhere to the Buy American Program. The project is managed by the DLA Weapons Support Active Devices Division within the Department of Defense, with performance taking place in New Cumberland. The response deadline for this requirement is October 30, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONNECTOR, RECEPTACLE, E

Solicitation # SPE7L3-27-T-1037

Solicitation SPE7L3-27-T-1037 is a request from the Defense Logistics Agency Weapons Support for the procurement of one electrical receptacle connector, identified by NSN 5935-01-097-9974. This item is classified as a commercial product and must adhere to specific technical data, including detailed drawings, parts lists, and quality assurance provisions. The delivery is required within 10 days after receipt of order, with the destination and acceptance point located in Ashland, Nebraska. The procurement is governed by NAICS code 334417 and may be subject to automated award, with a price evaluation preference for HUBZone concerns. The contract imposes stringent regulatory and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific adherence to Special Packaging Instruction 10979974. Financial administration is handled through the Wide Area WorkFlow system. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, hazardous material labeling, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-0432

Solicitation SPE7M0-27-T-0432 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of 98 electrical connector shells, identified by NSN 5935-01-464-4997. The requirement is categorized under NAICS code 334417. Delivery is required within 46 days after the order date, with an original required delivery date of April 17, 2026, and a need ship date of May 26, 2026. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific prohibitions on the use of Class I ozone-depleting substances and the intentional addition of mercury. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow RP001 requirements. Hazardous materials must be packaged per TQ requirement IP025, while non-hazardous items follow ASTM D3951. Inspection and acceptance will occur at the destination per FAR 52.246-1. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M1-27-U-0023

Solicitation SPE7M1-27-U-0023 is a request for quotations issued by DLA Land and Maritime for the procurement of 28 connector adapters, identified as NSN 5935016658263. This critical application item is being sought under a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and a performance period of one year. Approved part numbers include SB02B6A1508W2 from Joslyn Sunbank Company, 21740R140840055 from Electro Adapter Inc, and 447HJ109NF1508-B from Glenair, Inc. The procurement is set aside for HUBZone small businesses, with a preference for such concerns during price evaluation. Delivery is required within 94 days, with inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-129 for marking and RP001 for palletization, with specific requirements for hazardous materials under FED-STD-313 and TQ requirement IP025; non-hazardous items should follow ASTM D3951. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and limitations on subcontracting. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Quotations are due by October 19, 2026, and must not include used, reconditioned, or additive manufactured items.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0275

Solicitation SPE7M2-27-T-0275 is a request for quotations for the procurement of 1,285 fiber optic contacts, identified by NSN 6060014242293. The requirement is managed by the DLA Weapons Support Nuclear Reactor Program under NAICS code 334417. This is a critical application item that must adhere to the Qualified Products List (QPL) or Qualified Manufacturers List (QML) and comply with technical specifications MIL-PRF-29504/15B and MIL-PRF-29504C. Delivery is required within 200 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, subject to specific NAVSEA exceptions. Administrative requirements include electronic invoicing through the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including the Buy American Act and the Berry Amendment. Offerors must provide their CAGE code and represent their size status in accordance with the specified NAICS code.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days

General Info

Agency

Department Of Defense → FA8601 Aflcmc Pzio

Contract Value

$22,012.81

NAICS

334417 - Electronic Connector Manufacturing

Place of Performance

Set-Aside

NONE

Awardee

OMNETICS CONNECTOR CORPORATION

Award Issued Date

08/15/2018, 12:00:00 AM UTC

Documents

Grissom Board Connectors and Harnesses Minimum Requirements

specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedApr 6

Sources Sought

Notice updatedApr 6

Notice details unchanged. Attachments may have changed.

Response DeadlineApr 12

Deadline has passed

Submission Closed

04/12/2018, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA8601 Aflcmc Pzio

Contacts1 person available

OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA

Organization / AgencyDepartment Of Defense → FA8601 Aflcmc Pzio

Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA

Contacts

Kyle M Young

contact@example.gov

+1 (555) 000-0000

Full Description

MINIMUM REQUIREMENTS FOR Grissom Bus Printed Circuit Board Connectors and Harnesses GENERAL This specification is for Printed Circuit Board (PCB) connectors and harnesses that will provide electrical connection for the Air Force Institute of Technology (AFIT) Grissom CubeSat Bus. The board connectors and harnesses required shall be composed of three different types of positions: nine, fifteen, and thirty-one. I. Nine Position/Contacts A. The PCB Connector, shown in Figure 1 in Appendix A, shall: 1. Be a minimum quantity of 21 connectors, part number MNPO-09-AA-N-ETH-M 2. Have 9 male/pin contacts 3. Use surface mount pins 4. Have the surface mount pins be two rows, where 5 pins are near the body of the connector, and the remaining 4 pins 0.05 inches away from those 5 pins 5. Have the rows, listed under I.A.4, be 0.05 inches apart 6. Have the distance between the surface mount pins be 0.025 inches 7. Have an overall size of the connector be 0.375 x 0.345 x 0.140 inches (W x L x H) a. The body of the connector shall: i. Have dimensions of 0.375 x 0.240 x 0.140 inches (W x L x H) ii. Have a cutout for the surface mount pins be 0.170 x 0.125 x 0.140 inches (W x L x H) iii. Have two #0-80 threaded holes used for mechanical support with the PCB 0.187 inches away from the front facing side of the connector's body iv. Have those two threaded holes, listed under I.A.7.a.iii, 0.270 inches away from each other b. The front facing of the connector shall: i. Have the mating portion of the connector ii. Have two #0-80 threaded holes used for harness mechanical support on each side of the mating portion of the connector iii. Have those two threaded holes, listed under I.A.7.b.ii, 0.270 inches away from each other c. The mating portion of the connector shall: i. Have the 9 male/pin contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 ii. Have the 9 male/pin contacts resistance rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 iii. Have the 9 male/pin contacts be made of gold plated beryllium copper 8. Have the housing made of aluminum 6061-T6 9. Have the insulator made of liquid crystal polymer B. The Open-Ended Harnesses, shown in Figure 2 in Appendix A, shall: 1. Be a minimum quantity of 3 open-ended harnesses, part number MNSO-09-WD-18.0-N-EJS-C 2. Have the connector on one side only, while the other side is only loose wires 3. Mate with the connector listed under I.A 4. Include 2 screws used to mate with the connector listed under I.A.7.b.ii 5. Have the included screws, listed under I.B.4, made of 303 stainless steel 6. Have 9 female/socket contacts 7. Have Teflon coated wires 8. Have color coded wires 9. Have wire length of 18.0 inches 10. Have an overall size of the harness connector 0.375 x 0.225 x 0.125 inches (W x L x H) 11. Have the housing made of aluminum 6061-T6 12. Have the 9 female/socket contacts made of gold plated copper alloy 13. Have the 9 female/socket contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 14. Have the 9 female/socket contacts current rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 15. Have the insulator made of liquid crystal polymer C. The One-to-One Harnesses, shown in Figure 2 in Appendix A, shall: 1. Have wire length of 7.9 inches, part number JUM-09-MNSO-MNSO-WD-7.9-N-EJS-C a. Be a minimum quantity of 8 7.9 inches one-to-one harnesses 2. Have wire length of 18.0 inches, part number JUM-09-MNSO-MNSO-WD-18.0-N-EJS-C a. Be a minimum quantity of 8 18.0 inches one-to-one harnesses 3. Have the connector on both sides 4. Have contacts be connected one-to-one 5. Mate with the connector listed under I.A 6. Include 4 screws used to mate with the connector listed under I.A.7.b.ii, 2 per connector 7. Have the included screws, listed under I.C.6, made of 303 stainless steel 8. Have 9 female/socket contacts 9. Have Teflon coated wires 10. Have color coded wires 11. Have an overall size of the harness connector 0.375 x 0.225 x 0.125 inches (W x L x H) 12. Have the housing made of aluminum 6061-T6 13. Have the 9 female/socket contacts made of gold plated copper alloy 14. Have the 9 female/socket contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 15. Have the 9 female/socket contacts current rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 16. Have the insulator made of liquid crystal polymer II. Fifteen Position/Contacts A. The PCB Connector, shown in Figure 3 in Appendix A, shall: 1. Be a minimum quantity of 6 connectors, part number MNSO-15-AA-N-ETH-M 2. Have 15 female/socket contacts 3. Use surface mount pins 4. Have the surface mount pins be two rows, where 8 pins are near the body of the connector, and the remaining 7 pins 0.05 inches away from those 8 pins 5. Have the rows, listed under II.A.4, be 0.05 inches apart 6. Have the distance between the surface mount pins be 0.025 inches 7. Have an overall size of the connector be 0.450 x 0.345 x 0.140 inches (W x L x H) a. The body of the connector shall: i. Have dimensions of 0.450 x 0.225 x 0.140 inches (W x L x H) ii. Have two #0-80 threaded holes used for mechanical support with the PCB 0.187 inches away from the front facing side of the connector's body Have those two threaded holes, listed under II.A.7.a.ii, 0.345 inches away from each other b. The front facing of the connector shall: i. Have the mating portion of the connector ii. Have two #0-80 threaded holes used for harness mechanical support on each side of the mating portion of the connector iii. Have those two threaded holes, listed under II.A.7.b.ii, 0.345 inches away from each other c. The mating portion of the connector shall: i. Have the 15 female/socket contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 ii. Have the 15 female/socket contacts resistance rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 iii. Have the 15 female/socket contacts be made of gold plated copper alloy 8. Have the housing made of aluminum 6061-T6 9. Have the insulator made of liquid crystal polymer B. The Open-Ended Harnesses, shown in Figure 4 in Appendix A, shall: 1. Be a minimum quantity of 2 open-ended harnesses, part number MNPO-15-WD-18.0-N-EJS-C 2. Have the connector on one side only, while the other side is only loose wires 3. Mate with the connector listed under II.A 4. Include 2 screws used to mate with the connector listed under II.A.7.b.ii 5. Have the included screws, listed under II.B.4, made of 303 stainless steel 6. Have 15 male/pin contacts 7. Have Teflon coated wires 8. Have color coded wires 9. Have wire length of 18.0 inches 10. Have an overall size of the harness connector 0.450 x 0.210 x 0.125 inches (W x L x H) 11. Have the housing made of aluminum 6061-T6 12. Have the 15 male/pin contacts made of gold plated beryllium copper 13. Have the 15 male/pin contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 14. Have the 15 male/pin contacts current rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 15. Have the insulator made of liquid crystal polymer C. The One-to-One Harnesses, shown in Figure 4 in Appendix A, shall: 1. Be a minimum quantity of 8 one-to-one harnesses, part number JUM-15-MNPO-MNPO-WD-18.0-N-EJS-C 2. Have the connector on both sides 3. Have contacts be connected one-to-one 4. Mate with the connector listed under II.A 5. Include 4 screws used to mate with the connector listed under II.A.7.b.ii, 2 per connector 6. Have the included screws, listed under II.C.5, made of 303 stainless steel 7. Have 15 male/pin contacts 8. Have Teflon coated wires 9. Have color coded wires 10. Have wire length of 18.0 inches 11. Have an overall size of the harness connector 0.450 x 0.210 x 0.125 inches (W x L x H) 12. Have the housing made of aluminum 6061-T6 13. Have the 15 male/pin contacts made of gold plated beryllium copper 14. Have the 15 male/pin contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 15. Have the 15 male/pin contacts current rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 16. Have the insulator made of liquid crystal polymer III. Thirty-One Position/Contacts A. The PCB Connector, shown in Figure 5 in Appendix A, shall: 1. Be a minimum quantity of 16 connectors, part number MNSO-31-AA-N-ETH-M 2. Have 31 female/socket contacts 3. Use surface mount pins 4. Have the surface mount pins be two rows, where 16 pins are near the body of the connector, and the remaining 15 pins 0.05 inches away from those 16 pins 5. Have the rows, listed under III.A.4, be 0.05 inches apart 6. Have the distance between the surface mount pins be 0.025 inches 7. Have an overall size of the connector be 0.650 x 0.345 x 0.140 inches (W x L x H) a. The body of the connector shall: i. Have dimensions of 0.650 x 0.225 x 0.140 inches (W x L x H) ii. Have two #0-80 threaded holes used for mechanical support with the PCB 0.187 inches away from the front facing side of the connector's body iii. Have those two threaded holes, listed under III.A.7.a.ii, 0.545 inches away from each other b. The front facing of the connector shall: i. Have the mating portion of the connector ii. Have two #0-80 threaded holes used for harness mechanical support on each side of the mating portion of the connector iii. Have those two threaded holes, listed under III.A.7.b.ii, 0.545 inches away from each other c. The mating portion of the connector shall: i. Have the 31 female/socket contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 ii. Have the 31 female/socket contacts resistance rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 iii. Have the 31 female/socket contacts be made of gold plated copper alloy 8. Have the housing made of aluminum 6061-T6 9. Have the insulator made of liquid crystal polymer B. The Open-Ended Harnesses, shown in Figure 6 in Appendix A, shall: 1. Be a minimum quantity of 3 open-ended harnesses, part number MNPO-31-WD-18.0-N-EJS-C 2. Have the connector on one side only, while the other side is only loose wires 3. Mate with the connector listed under III.A 4. Include 2 screws used to mate with the connector listed under III.A.7.b.ii 5. Have the included screws, listed under III.B.4, made of 303 stainless steel 6. Have 31 male/pin contacts 7. Have Teflon coated wires 8. Have color coded wires 9. Have wire length of 18.0 inches 10. Have an overall size of the harness connector 0.650 x 0.210 x 0.125 inches (W x L x H) 11. Have the housing made of aluminum 6061-T6 12. Have the 31 male/pin contacts made of gold plated beryllium copper 13. Have the 31 male/pin contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 14. Have the 31 male/pin contacts current rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 15. Have the insulator made of liquid crystal polymer C. The One-to-One Harnesses, shown in Figure 6 in Appendix A, shall: 1. Be a minimum quantity of 8 one-to-one harnesses, part number JUM-31-MNPO-MNPO-WD-11.8-N-EJS-C 2. Have the connector on both sides 3. Have contacts be connected one-to-one 4. Mate with the connector listed under III.A 5. Include 4 screws used to mate with the connector listed under III.A.7.b.ii, 2 per connector 6. Have the included screws, listed under III.C.5, made of 303 stainless steel 7. Have 31 male/pin contacts 8. Have Teflon coated wires 9. Have color coded wires 10. Have wire length of 11.8 inches 11. Have an overall size of the harness connector 0.650 x 0.210 x 0.125 inches (W x L x H) 12. Have the housing made of aluminum 6061-T6 13. Have the 31 male/pin contacts made of gold plated beryllium copper 14. Have the 31 male/pin contacts current rated for a maximum of 1 Amp per pin, as stated in the MIL-DTL-32139 15. Have the 31 male/pin contacts current rated for a maximum of 71 mOhms at 1.0 Amp per pin, as stated in the MIL-DTL-32139 16. Have the insulator made of liquid crystal polymer The board connectors and harnesses shall comply with MIL-DTL-32139 standard. Dimensions and distances shall be within 0.01 inches. Workmanship shall be consistent with best commercial practices and be free of defects and major flaws. DELIVERABLES Contractor shall provide the listed sets of connectors with their mating harnesses. Quantities of each item are listed in the requirements and shall be met by the contractor. PERIOD OF PERFORMANCE The contractor shall deliver the connectors and harnesses within 9 weeks after receipt of contract. DELIVERY The contractor shall ship the connectors and harnesses to the Air Force Institute of Technology at WPAFB, OH. Great care using standard, approved packaging methods shall be taken.