Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

GSE Tracker Installation and Field Support

Active

State & Local

Response Deadline10/28/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The GSE Tracker Installation and Field Support subcontract involves the physical installation of tracking hardware on non-motorized ground support equipment at Port of Seattle common-use gates. The selected provider will be responsible for attaching trackers, verifying signal connectivity, and replacing failed units throughout a one-year Proof of Concept period to ensure a fully operational tracker network. Due to the nature of the work, personnel must obtain airport security badges to gain necessary ramp access. This opportunity is associated with NAICS code 811219, with a response deadline set for October 28, 2026.

General Info

Agency

Washington → Port of Seattle

NAICS

811219 - Other Electronic and Precision Equipment Repair and Maintenance

Place of Performance

WA, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-122.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Proof of Concept: Tracking Solution for Ground Support Equipment at SEA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 28

Submission deadline

Response Deadline

10/28/2026, 09:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyWashington → Port of Seattle

ContactsNo contacts available

OfficeN/A

Organization / AgencyWashington → Port of Seattle

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical installation of tracking hardware for prime contractors on Port of Seattle GSE projects. Attaches trackers to non-motorized equipment at SEA common-use gates, verifies signal connectivity, and performs hardware replacements for failed units throughout the one-year PoC. Requires airport security badges for ramp access. Delivers a fully installed and operational tracker network.

Similar Contracts

Same NAICS industry code

System Installation and Commissioning

Florida State University

POSTED

about 17 hours ago

DEADLINE

Dental Imaging Installation and Integration ServicesThe Dental Imaging Installation and Integration Services subcontract involves the physical installation and technical configuration of CBCT imaging systems for Downs Family Dentistry, PC. Working under prime contractors on MPTAP projects, the selected provider is responsible for unpacking, positioning, mounting, wiring, and configuring both the imaging systems and associated archiving hardware to ensure a fully operational delivery. To qualify for this engagement, the provider must utilize manufacturer-certified installation technicians and employ specialized medical equipment calibration tools. This project falls under NAICS code 811219 and is managed through the Mississippi MPTAP agency.

POSTED

about 20 hours ago

DEADLINE

in about 4 hours

Maintenance and Support Services for Colorimetric AnalysersThis subcontract focuses on providing essential technical support and maintenance for colorimetric analysers used in Environment Agency laboratory projects. The scope of work involves delivering calibration, preventative maintenance, and technical troubleshooting to ensure instrumentation remains operational and accurate. These services must be performed by manufacturer-certified technicians utilizing specialized diagnostic tools, with the final deliverables consisting of fully maintained equipment and detailed service reports. The opportunity is categorized under NAICS code 811219 and is managed by the Environment Agency. Interested parties should note that the response deadline is set for November 11, 2026. This contract is designed to support prime contractors in maintaining high standards of laboratory instrumentation through professional technical oversight and certified maintenance protocols.

Environment Agency

POSTED

about 23 hours ago

DEADLINE

Specialized Technical Installation & Training ServicesThis small business set-aside subcontract, titled Specialized Technical Installation and Training Services, involves providing onsite installation and system integration for scientific equipment projects under the USGS Contracting Activity within the Department of the Interior. The scope of work focuses on the installation of Nikon microscopes and cameras at the Denver Federal Center, including the integration of this hardware with Dell Latitude laptops and the execution of necessary firmware updates. The contractor is responsible for delivering a fully operational system, which includes providing software assistance and comprehensive user training for USGS staff. All activities must be performed in strict adherence to facility security requirements and the DOI Computer Incident Response Guide. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 811219.

Usgs Contracting Activity

POSTED

DEADLINE

UV-C System Preventive Maintenance and Warranty Support

- Comm/Tech College - Delgado Community College

POSTED

DEADLINE

Medical Equipment Installation and Clinical Training Services

- Comm/Tech College - Delgado Community College

POSTED

DEADLINE

Pin Wire Tester / Amplifier Diagnostic Evaluation (TT&E)This subcontract involves providing technical diagnostic evaluation services for prime contractors supporting AFSC PZIMB projects under the Department of Defense. The primary scope of work focuses on conducting root cause analysis for amplifier failures, with a specific emphasis on identifying the source of audible popping events. To ensure precision, all testing must be performed using equipment calibrated to ISO 17025 or ANSI/NCSL Z540-1 standards. The contractor is required to deliver a comprehensive TT&E Repairability Report along with a firm-fixed-price repair quote in accordance with CDRL A001 / DI-MISC-80508B. This effort falls under NAICS code 811219 and is associated with a performance location in zip code 73145.

FA8126 Afsc Pzimb

POSTED

DEADLINE

Biomedical Equipment Technician (BMET) Support ServicesThe Biomedical Equipment Technician (BMET) Support Services subcontract involves providing specialized technical maintenance and repair for clinical and research medical equipment at the National Institutes of Health Clinical Center in Bethesda. The scope of work includes performing preventive maintenance, inspections, calibrations, electrical safety testing, and functional verification. Technicians are responsible for troubleshooting a wide range of analog, digital, and microprocessor-controlled devices, specifically including patient monitoring systems, ventilators, and dialysis equipment. To ensure operational safety and quality, the contractor must maintain strict compliance with TJC, CAP, and AABB standards while providing detailed maintenance records and calibration logs. This opportunity is associated with the Department of Health and Human Services and falls under NAICS code 811219. Interested parties should note the response deadline of October 22, 2026.

National Institutes Of Health Olao

POSTED

DEADLINE

Installation, Commissioning, and Maintenance of DNA ThermocyclersThis subcontract focuses on the installation, commissioning, and long-term maintenance of DNA thermocyclers for Forensic Science Northern Ireland. The selected provider will be responsible for installing equipment, validating operational readiness, and implementing both reactive and preventative maintenance strategies to ensure equipment longevity. These services will be performed by certified engineers utilizing specialized diagnostic software and calibration tools, with all work documented through detailed commissioning reports and maintenance logs. The opportunity was posted on October 12, 2026, with a response deadline of November 11, 2026. Falling under NAICS code 811219, the contract requires the provider to support prime contractors in delivering high-precision technical services to maintain critical forensic infrastructure.

Forensic Science Northern Ireland

POSTED

DEADLINE

Healthcare Education Equipment Technical ServicesThe Healthcare Education Equipment Technical Services subcontract involves providing delivery, installation, warranty support, and repair services for prime contractors working on healthcare education projects at Bowling Green State University. The scope of work specifically includes the installation of lab equipment and the provision of technical support for simulation systems, with a requirement for the contractor to deliver operational equipment and detailed repair service reports. Managed by Bowling Green State University Purchasing in Ohio, the contract requires the provider to maintain Commercial General Liability and Business Automobile Liability insurance. The solicitation was posted on October 12, 2026, with a response deadline of October 29, 2026, falling under NAICS code 811219.

Bowling Green State University - Purchasing

POSTED

DEADLINE

Microscope Installation and Calibration TechnicianThis subcontract opportunity is for a Microscope Installation and Calibration Technician to support prime contractors on projects for the New Hampshire Department of Administrative Services. The selected technician will be responsible for the physical installation and technical configuration of the Echo Revolve R4 system, which includes unpacking equipment, installing optical components, and configuring the hybrid flipping mechanism. Additionally, the role requires the activation of Digital Haze Reduction Software and the use of precision tools to ensure proper optical alignment. The primary objective of the contract is to deliver a fully installed, calibrated, and operational microscope system. Interested parties should note that the solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026. The work falls under NAICS code 811219 and is managed through Das Purchasing for the state of New Hampshire.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

Sensor Node Extended Warranty and MaintenanceThe Sensor Node Extended Warranty and Maintenance subcontract involves a three-year extended warranty program and annual maintenance for flood monitoring nodes used in Town of Cary municipal projects. The selected provider will be responsible for managing bidirectional shipping for all necessary repairs and offering unlimited technical support via phone and virtual channels. To qualify, the contractor must be a manufacturer-authorized service provider and is required to deliver formal warranty certificates and annual maintenance service reports. This opportunity is associated with the Town of Cary in North Carolina under NAICS code 811219. The solicitation was posted on October 12, 2026, with a response deadline of October 20, 2026.

POSTED

DEADLINE

More opportunities from Washington → Port of Seattle

Same awarding agency

Hosted GSE Tracking & Management PlatformThe Hosted GSE Tracking and Management Platform subcontract, issued by the Port of Seattle, requires the hosting and maintenance of a web-based platform designed for prime contractors on Ground Support Equipment projects. The system must feature authenticated user access, map displays with timestamps, geofencing capabilities for dwell time reporting, and the ability to export data via CSV. Additionally, the contractor is responsible for maintaining a database that links trackers to specific equipment records and owners. The selected provider must ensure the platform is fully functional and compliant with the Washington Public Records Act. Key deliverables include the hosted web platform and the generation of CSV reports. This opportunity falls under NAICS code 518210, with a response deadline set for October 28, 2026.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Weather-Resistant Cellular Asset TrackersThis subcontract opportunity with the Port of Seattle involves the provision of weather-resistant cellular asset tracking hardware for ground support equipment projects. The selected provider will deliver standalone hardware units designed for airport operational environments, featuring integrated cellular connectivity to report communication and battery status independently of Port Wi-Fi or BLE gateways. The procurement falls under NAICS code 334290 and requires the delivery of physical tracking units that are deployment-ready. Interested parties must submit their responses by the deadline of October 28, 2026.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Proof of Concept: Tracking Solution for Ground Support Equipment at SEA

Solicitation # 26-122

The Port of Seattle is seeking a deployment-ready standalone tracking solution for non-motorized ground support equipment at Seattle Tacoma International Airport common-use gates. This one-year Proof-of-Concept project, identified by solicitation number 26-122, aims to improve operational efficiency by providing location and ownership data to prevent equipment from obstructing gate areas. The project has a firm not-to-exceed cost of 150,000 dollars, excluding Washington State sales tax. The Port intends to negotiate a contract with Sensolus Inc., though it is accepting expressions of interest until October 29, 2026. The required solution must be a pilot-ready product that utilizes standalone cellular connectivity or an equivalent method, as it cannot rely on new Port infrastructure such as Wi-Fi, BLE gateways, or new cabling. Key technical requirements include a hosted web platform with authenticated access, map displays with timestamps, geofencing and dwell time reporting, and the ability to export data via CSV. Hardware must be weather-resistant and provide visibility into battery and communication status. All submissions are subject to the Washington Public Records Act and must not contain confidential or protected personal information.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Leave Administration for Port Employees

Solicitation # 28473

The Port of Seattle is seeking a qualified consulting firm to manage comprehensive leave administration services for its employees. The selected provider will be responsible for overseeing the Family and Medical Leave Act, the Port Paid Family and Medical Leave program, and the Port’s Paid Parental Leave program. Key duties include handling eligibility determinations, tracking leave, managing employee communications, and ensuring all related compliance activities are met. This solicitation, numbered 28473, has a total contract value not to exceed 1.5 million dollars. While there are no specific set-aside goals, small businesses and WMBEs are encouraged to participate as prime contractors. Interested parties must submit their proposals by November 10, 2026, at 12:00 PM, following a virtual pre-proposal conference held on October 16, 2026.

Human Resources Consulting Services

POSTED

DEADLINE

Glass and Glazing Unit Price Portwide 2026

Solicitation # 28472

The Port of Seattle is soliciting bids for the Glass and Glazing Unit Price Portwide 2026 contract, solicitation number 28472. This small works project has a not-to-exceed budget of 350,000 dollars and requires a contractor to provide all necessary labor, materials, and equipment for glass and glazing services. The scope of work includes skylights, window films, aluminum storefront assemblies, and specialized work on Satellite Transportation System cars at Seattle-Tacoma International Airport and other Port properties. Interested parties must attend a virtual pre-bid meeting on October 20, 2026, at 11:00 AM. Final bids are due by October 27, 2026, at 11:00 AM. While there are no mandatory goals for this solicitation, the Port encourages Small Businesses and WMBE firms to participate as prime contractors. Primary inquiries regarding this opportunity should be directed to Nicolas Thoumsaint.

Glass and Glazing Contractors

POSTED

DEADLINE

Leadership Development Program for Construction Pathways

Solicitation # 28456

The Port of Seattle is soliciting proposals for a Leadership Development Program for Construction Pathways under solicitation number 28456. The selected consultant will be responsible for the design, implementation, and management of a program aimed at strengthening the construction leadership pipeline. This initiative focuses on utilizing structured training, mentorship, and employer engagement to achieve measurable advancement outcomes for participants. The contract has a not-to-exceed budget of 300,000 dollars and includes a 5 percent WMBE goal. Interested parties should note that a virtual pre-proposal conference is scheduled for October 9, 2026, at 11:00 AM. All final proposals must be submitted by the deadline of November 3, 2026, at 12:00 PM.

Professional and Management Development Training

POSTED

DEADLINE

Emerson St Sinkhole Repair

Solicitation # 28388

The Port of Seattle is seeking bids for the Emerson St Sinkhole Repair project, a major construction contract valued between 400,000 and 600,000 dollars. The scope of work involves replacing a disconnected portion of a stormwater drain line and establishing a new connection to the main King County line beneath Emerson Street. Required tasks include excavation, line removal and replacement, filling, and asphalt work. Due to the location on a busy roadway, the project necessitates extensive traffic controls to manage impacts across several lanes. Interested parties must attend a virtual pre-bid meeting on October 5, 2026, at 11:00 AM. The final deadline for bid submissions is October 26, 2026, by 2:00 PM. This solicitation includes a WMBE goal of 8 percent. For further inquiries, the primary point of contact is Marilynn Montenegro.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

LED Runway and Taxiway Lighting Materials

Solicitation # 28387

The Port of Seattle is soliciting bids for the procurement of LED runway and taxiway lighting materials for Seattle Tacoma International Airport. This contract supports a broader transition to LED airfield lighting scheduled to take place between 2027 and 2030, with an initial order intended to be placed immediately following the execution of the contract. Interested bidders must submit their proposals by October 21, 2026, at 2:00 PM, following a virtual pre-bid meeting held on October 6, 2026. The contract will be awarded to the responsive and responsible bidder who provides the lowest priced, technically acceptable bid. Primary inquiries regarding this solicitation can be directed to Jennifer Jonson.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Mobile Passenger Boarding Ramps (International & Continental)

Solicitation # 28310

The Port of Seattle is soliciting bids for the procurement of self-powered mobile passenger boarding ramps for both international and continental use. These ramps are intended for year-round hardstand operations at Seattle-Tacoma International Airport. The contract will be awarded to the lowest priced, responsive, and responsible bidder, and while there are no specific set-aside goals, the agency encourages participation from small businesses and WMBEs as prime contractors. Interested parties must attend a virtual pre-bid meeting on September 23, 2026, at 2:00 PM. The final deadline for bid submissions is October 20, 2026, by 2:00 PM. This solicitation is managed by the Port of Seattle under solicitation number 28310, with Evan Gray serving as the primary point of contact for the procurement process.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS