Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GUIDE, SNUBBER, AFT

Active
SPE4A6-26-T-09TLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The item specified is a GUIDE, SNUBBER, AFT, to be manufactured via metal casting using tooling approved under Northrop Grumman Systems Corporation drawing 4-82034 Revision D with part number 4-82034-2, and must comply with configuration control requirements. Approved sources include Northrop Grumman Systems Corporation, Marvin Engineering Co. Inc., and GE Aviation Systems LLC, each required to produce the part to the exact specification. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise directed; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract mandates adherence to DLA packaging standards per RP001 and MIL-STD-129, with packaging conforming to ASTM D3951 only if not superseded by DLA requirements. The item must be marked per RQ017 with physical identification and comply with RD004’s CMMC Level 2 Self-Assessment requirements. Delivery is required in two units, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery point at NAF Key West, Florida, with a required delivery date of July 21, 2026. All documentation, including unit of issue, packaging, and labeling, must align with DLA directives, and cybersecurity, configuration management, and quality assurance protocols are strictly enforced.

General Info

Guide snubber aft, cast per drawing 4-82034 Rev D, two units, DLA specs, deliver to NAF Key West by July 21, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336415 - Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts ManufacturingView NAICS

Place of Performance

BLDG A936 MIDWAY AVE, KEY WEST, FL, 33040-9059, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-09TL.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MICHAEL BLAIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GUIDE,SNUBBER,AFT
GUIDE, SNUBBER, AFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CONFIGURATION CONTROL IAW: NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE:
76823 DWG: 4-82034 REV D P/N 4-82034-2 APPROVED SOURCES: NORTHROP
GRUMMAN SYSTEMS CORPORATION CAGE 06892 MARVIN ENGINEERING CO., INC.CAGE
32067 GE AVIATION SYSTEMS LLC CAGE 4N727 IDENTIFY TO: SAMPLING: CASTING
AND FORGING:
SPE4A6-26-T-09TL
SECTION B
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
NORTHROP GRUMMAN SYSTEMS CORPORATION 06892 P/N 4-82034-2
MARVIN ENGINEERING CO, INC 32067 P/N 4-82034-2
INTEGRAL AEROSPACE, LLC 4N727 P/N 4-82034-2
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 76823 4-82034 REVISION NR D DTD 10/31/1973 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017589265 0001 EA 2.000
NSN/MATERIAL:1440000185027
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N52923
VFC 111
NAF BOX 9059
BLDG A936 MIDWAY AVE
KEY WEST FL 33040-9059
US
SPE4A6-26-T-09TL
SECTION B
PR: 7017589265 PRLI: 0001 CONT’D
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N52923
COMMANDING OFFICER
FIGHTER SQUADRON COMPOSITE VFC 111
NAF HANGAR A 936
KEY WEST FL 33040-9059
US
M/F: (TCN) N529236197K370
RDD: 213
PROJ: AK1 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 69B ADV: FC: KB
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026
SPE4A6-26-T-09TL NSN/Part Number: 1440-00-018-5027 Quantity: 2 EA Purchase Request: 7017589265QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336415
New
DIBBS
ROLLERON ASSEMBLY
Solicitation # SPE4A6-26-T-10BN
The contract solicits four ROLLERON ASSEMBLY units under NSN 1420-00-906-7972 with a delivery requirement of 207 days after award, designated for the Department of Defense's ASC Commodities Division. The solicitation number is SPE4A6-26-T-10BN, issued on July 28, 2026, with responses due by August 5, 2026, and performance is to be delivered to Tracy, California, 95304-5000. Technical and quality specifications referenced in the document are governed by the DLA Master List, with revisions in effect on the solicitation or award date controlling based on acquisition size. This item is subject to stringent cybersecurity requirements, mandating CMMC Level 2 certification for the third-party assessor. It also involves export-controlled technical data governed by ITAR or EAR, restricting unauthorized disclosure to foreign persons, whether domestic or abroad, and requires recipients to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval for access. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and items must be physically marked as specified. The primary point of contact is Michael Blain, reachable via email and phone for inquiries.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336415
New
DIBBS
PISTON, RESONANCE CH
Solicitation # SPE7M4-26-T-289S
This contract pertains to the procurement of a PISTON, RESONANCE CH, identified by NSN 2010-01-029-9345 and part number 65-5691-126 from KINGSBURY INC. A total of 12 units are required under Solicitation SPE7M4-26-T-289S, with delivery due in 161 days from order placement, to be shipped FOB origin. The item is classified as a critical application item and must comply strictly with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking requirements. No special marking is required beyond standard compliance. The delivery destination is Robins AFB, Georgia, and transportation logistics follow DLA procedural notes C19 and C20. The contract prohibits the intentional use or direct contact of mercury or mercury-containing compounds, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable devices with mercury must include shock-proof design and a secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly forbidden, and any substitutes require prior approval unless explicitly permitted by the technical specifications. This solicitation is a total small business set-aside under NAICS code 336415, with a response deadline of August 10, 2026, and a required ship date of January 19, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date as applicable.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336415
New
DIBBS
HOUSING ASSEMBLY, SH
Solicitation # SPE4A5-26-T-309T
The contract solicitation pertains to the procurement of a Housing Assembly, SH, under solicitation number SPE4A5-26-T-309T, with a response deadline of August 4, 2026, and a posted date of July 27, 2026. The requirement is for a quantity of two units to be delivered within 165 days of award, with performance designated to New Cumberland, Pennsylvania, 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition class. Source approval documentation must be submitted via a Source Approval Request, and cybersecurity compliance is mandated at CMMC Level 2 through self-assessment. Packaging must adhere to DLA standards, and all supplies must be marked with physical identification as specified, though Government identification removal is required for non-accepted items. Item Unique Identification is not required per the Service customer’s directive, with DFARS 252.211-7003(c)(1)(i) governing marking obligations. Covered defense information applies, and the NAICS code is 336415, classified under federal acquisition. The point of contact is Courtney Minor, reachable via courtney.minor@dla.mil, with the solicitation hosted on the DIBBS platform.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 336415
New
Federal
Minuteman III ICBM, Clutch Assembly, FRI
Solicitation # FA8206-26-Q-0005
This solicitation, identified as FA8206-26-Q-0005, seeks firm fixed price supplies for the Minuteman III ICBM program, specifically eight clutch assemblies with NSN 3010014622032AH and part number 33307-40073-10, along with a counterfeit prevention plan governed by CDRL A002, which is not separately priced. The contract is a total small business set-aside under NAICS code 336415, requiring all offerors to be certified small businesses in SAM and to maintain accurate socioeconomic representations. Performance is to be conducted in accordance with strict military standards including MIL-STD-2073-1 for packaging, MIL-STD-129 for labeling, and adherence to AFMC Form 158 and DoD specifications. Hazardous material handling must comply with FED-STD-313, and Safety Data Sheets must be submitted accordingly. The clutch assemblies require Item Unique Identification (IUID), and the contractor must meet ISO 9001-2015 quality assurance standards. All deliveries are to be shipped F.O.B. origin with inspection and acceptance occurring at origin, and the first article approval process is mandatory, with failure to meet requirements potentially constituting a default. The contractor must be compliant with CMMC Level 2 for all systems handling Federal Contract Information or Controlled Unclassified Information, with annual affirmations maintained in SPRS and the CMMC Unique Identifier provided. Subcontractors must also flow down CMMC requirements. Payment will be processed via WAWF, with fixed-price line items requiring an invoice and receiving report conforming to DFARS Appendix F. The quote submission deadline is 3:30 pm MDT on July 17, 2026, and must be emailed to Camie Connelly and Tyler Groves. Offered prices must remain firm for 60 days, and compliance with Buy American, anti-trafficking, and debarment regulations is mandatory. All responses must include current CAGE code and verified SAM representations.
FA8206 Afsc Pzaca (icbm)

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336415
New
DIBBS
GUIDE, CONNECTOR, UMB
Solicitation # SPE7M8-26-T-5597
The contract pertains to the procurement of a GUIDE, CONNECTOR, UMB with NSN 1440-01-084-4956 and part number 3103774-1-1, issued under solicitation SPE7M8-26-T-5597. Four units are required at a unit price of $4.00, totaling $16.00, with delivery required within 133 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s packaging requirements, and all technical and quality standards referenced by R or I numbers from the DLA Master List take precedence. The item must be delivered to the specified federal facility with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contractor is subject to DLA’s procurement rules including the requirement for Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and must adhere to the removal of government identification from non-accepted supplies. The solicitation applies to simplified acquisition procedures, and the controlling version of the DLA Master List is determined by the solicitation issue date. The delivery timeline references an original required delivery date of July 17, 2025, with a need ship date of April 8, 2025. The point of contact for the requirement is Rickie Allen of the Electrical Devices Division, U.S. Department of Defense, and the contract is governed under NAICS code 336415, with full transportation and shipping instructions tied to DLA procedural notes C19 and C20. Approved sources include Marvin Engineering Co., Inc. and Raytheon Company.
ELECTRICAL DEVICES DIV

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336415
New
Federal
GAGE,PRESS,3000 PSI
Solicitation # N0010426QAC94
The contract pertains to the manufacture of a 3000 PSI PRESS GAGE under solicitation N0010426QAC94, issued as a Total Small Business Set-Aside for NAICS code 336415, with responses due by August 6, 2026. The procuring activity is Navsup Weapon Systems Support Mech, located in Mechanicsburg, Pennsylvania, and the point of contact is Amanda R. Hayward. The item must conform strictly to part number 4272234/405 with cage code 61049, and all manufacturing, design, and marking must comply with applicable Military Standards including MIL-STD-130 for mechanical parts and MIL-STD-973 for configuration control. The contractor is responsible for all quality assurance inspections and must maintain detailed records for 365 days after final delivery. Government source inspection is mandatory, and delivery is required within 90 days of contract issuance. Packaging must adhere to MIL-STD-2073 and all documentation, including engineering change proposals and deviation requests, must be submitted to the specified Naval Inventory Control Point address. The contract permits commercial brand name descriptions but requires full technical substitution proposals for review. Payment will be processed through Wide Area Workflow using a combined invoice and receiving report, with inspection and acceptance taking place at the source. Cybersecurity certification requirements, security prohibitions, and national defense priority ratings are applicable, and all contractual documents are deemed issued upon electronic transmission or mail delivery.
Navsup Weapon Systems Support Mech

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 336415
DIBBS
COVER, PROTECTIVE, GUIDE
Solicitation # SPE4A6-26-T-09BL
The contract pertains to a protective cover for a guided missile component, identified by NSN 1420-01-439-2737, with a quantity of one unit required. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—whether within the United States or overseas—is prohibited without prior authorization from the Department of State or the Department of Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies, and DFARS 252.225-7048 governs compliance. Access to the technical data is limited exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA controlling authority. The item is to be delivered within five days after award, under purchase request 7017523100. The solicitation, issued by the Department of Defense's ASC Commodities Division, was posted on July 22, 2026, with responses due by July 30, 2026, and performance is to occur in Chambersburg, Pennsylvania, with Ashley Jones named as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 336415
DIBBS
LINER, SEAL, PROPELLE
Solicitation # SPE7M4-26-T-272B
The contract pertains to the procurement of liner, seal, propeller components under solicitation SPE7M4-26-T-272B, with identical item NSN 2010015158037 delivered in five separate line items, each for one unit, to five distinct U.S. Navy vessels via FPO addresses including USS BOXER, TRIPOLI, IWO JIMA, ESSEX, and MAKIN ISLAND. Delivery is required within 20 days of order placement with FOB destination terms, meaning the contractor bears all transportation costs and risks until physical receipt at the shipboard location. Packaging and preservation must strictly adhere to MIL-STD-2073-1E with QUP 001, preservation method 31, no cling or dry materials, and unit container E6, while marking must follow MIL-STD-129 with no special markings required. Palletization must comply with DLA’s RP001 packaging requirements. The supply is prohibited from containing mercury or mercury compounds except in specific exempted applications such as batteries, lamps, instruments, or sensors approved by NAVSEA, and portable devices containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Hexavalent chromium is explicitly banned, and hazardous materials must be handled, labeled, and disposed of in full compliance with federal regulations. Transportation of goods must be via the fastest traceable means, prohibiting parcel post, and ocean shipments require U.S.-flag vessels unless a waiver is obtained. All deliveries must be accompanied by electronic submission through WAWF using a receiving report and invoice. Inspection and acceptance occur solely at the destination by Government personnel. Contractor compliance includes mandatory representations regarding entity identity, size status, subcontracting, trafficking in persons, employment eligibility, and cybersecurity controls under FAR and DFARS clauses including 52.227-1, 52.246-2, 252.204-7012, and 252.223-7008. No unit prices or total contract value are stated, and payment details, COR/COTR assignments, and evaluation factors are not provided, indicating this document serves as a framework requiring completion upon award.
FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 5 days
View Details
NAICS: 336415
Federal
PATRIOT Cooler Liquid Electron Tube (CLET) Pump
Solicitation # W31P4Q_CLET_SSN
The U.S. Army Contracting Command at Redstone Arsenal, Alabama, is conducting market research through a Request for Information to identify qualified sources capable of manufacturing and repairing the PATRIOT Cooler Liquid Electron Tube (CLET) Pumps, specifically Part Numbers 11463449-2 and 11463449-3, or comparable alternatives that meet fit, form, and function requirements. The goal is to support maintenance and upgrades for both U.S. and Foreign Military Sales PATRIOT radar systems, with an emphasis on non-developmental items to reduce cost and schedule risk. While the parts are not proprietary, vendors proposing alternatives must provide complete design data for Government review prior to any potential contract award, and the Technical Data Package is available upon request to qualified respondents. The requirement is classified under NAICS code 336415 with a size standard of 1,250 employees, and all responses must be submitted electronically as a concise capabilities statement in Word or PDF format no later than August 17, 2026. The Government retains unlimited rights to the TDP and will provide it to technically capable respondents within five days of request, allowing an additional two weeks for submission even if the official deadline has passed. Responses are voluntary, non-binding, and no funds will be provided for preparation. The CLET Pumps require robust manufacturing and repair capabilities, including facility readiness, technical expertise, testing protocols, and logistical support for both domestic and international users, with a preference for systems designed for minimal maintenance and ease of repair in deployed environments. Compliance with the Berry Amendment for specialty metals is mandatory in any resulting contract, and while no security clearance is required, the Defense Contract Management Agency may conduct facility assessments to ensure production capability. Subcontracting arrangements must be clearly outlined, and all submissions must include organizational details, contact information, and supporting documentation of relevant experience. Proprietary information submitted will be safeguarded by the Government, and classified material is strictly prohibited. Responses are not offers, do not constitute a solicitation, and will not result in any obligation or award unless a future formal procurement is issued. The point of contact for submissions is Karen Rivera at the provided email, and all correspondence must reference the RFI number.
W6QK Acc-Rsa

POSTED

9 days ago

DEADLINE

in 19 days
View Details
NAICS: 336415
DIBBS
GEARSHAFT ASSEMBLY
Solicitation # SPE7M0-26-T-011H
The contract is for the procurement of five gearshaft assemblies, identified by NSN 2010-01-065-5252 and part number 46296E290, supplied by TIMKEN GEARS & SERVICES INC. The items must be delivered within five days of contract award, FOB origin, with zero variance in quantity and inspection and acceptance occurring at the point of origin. Packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container codes, and must be palletized per DLA packaging requirements. All supplies are subject to DLA’s Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance controls based on the revision in effect at the solicitation or award date. The contract prohibits the intentional addition of mercury or mercury compounds to any hardware unless specifically exempted for approved functions such as batteries, sensors, or weapon systems, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The product is classified as a critical application item and requires CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment. Delivery is to the General Depot of Naval Supplies in Kaohsiung, Taiwan, with shipment coordinated under DLA procedures. The contract is a total small business set-aside under NAICS code 336415, with a response deadline of July 30, 2026, and an original required delivery date of July 21, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

10 days ago

DEADLINE

in about 23 hours
View Details
NAICS: 336415
DIBBS
Supply of Propulsion System Frame (NSN: 2040-01-729-8646)
Defense Logistics Agency

POSTED

27 days ago

DEADLINE

N/A
View Details
NAICS: 336415
SBIR / STTR
Novel Ignition Systems for multi-pulse Solid Propellant Rocket Motors
Solicitation # MDA26TZ04-NV001
The Missile Defense Agency is seeking innovative ignition systems for multi-pulse solid propellant rocket motors that enable repeated ignition using a single, non-pyrotechnic hardware setup, eliminating the need for multiple sensitive pyrotechnic initiators. This advancement aims to enhance system safety by reducing the risk of accidental detonation while improving operational flexibility through precise, repeatable motor firing capability. Current systems rely on separate igniters for each pulse, increasing complexity, weight, and hazard; the desired solution must be reliable, reusable, and compatible with existing solid propulsion architectures without compromising performance or integrity. This solicitation, designated MDA26TZ04-NV001, is a total small business set-aside under the SBIR/STTR mandate, restricted to entities with fewer than 500 employees. The opportunity was posted on July 1, 2026, with responses due by July 22, 2026. While specific technical requirements are not outlined in the public data, emphasis is placed on novel approaches that replace traditional pyrotechnic ignition with alternative mechanisms capable of multiple firings. The goal is to enable more efficient mission profiles by allowing optimized burn sequences, extended operational windows, and improved reliability in strategic defense applications. All proposals must be submitted via the SBIR portal and align with the Department of Defense’s objective of modernizing propulsion systems for next-generation missile defense platforms.
Missile Defense Agency

POSTED

29 days ago

DEADLINE

in 20 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.
Other Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.
Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 423690
New
DIBBS
Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.
Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.
Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.
Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.
Ball and Roller Bearing Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details